Self-assembly of a hexameric aggregate of a lipophilic calix[4]pyrrole-resorcinarene hybrid in solution: a diffusion NMR study

The lipophilic calix[4]pyrrole-resorcinarene hybrid 1b, the extended analogue of resorcin[4]arene 2b, was synthesized for the first time, and its self-assembly in solution was studied using (1)H and diffusion NMR. It was found that 1b self-assembles to hexameric aggregates in CDCl(3) solution. The interaction of trialkylamine guests with the hexameric aggregate of 1b was explored, and it appears that under the conditions used in the present study these guests interact with the external faces of the hexameric aggregate of 1b.     

Exclusive self-assembly of a polar dimeric capsule between tetraurea calix[4]pyrrole and tetraurea calix[4]arene

The exclusive self-sorting observed in the self-assembly process between tetraurea benzyl calix[4]pyrroles and tetraurea tolyl calix[4]arene to afford unprecedented hybrid dimeric capsules with polar interiors is described. The coencapsulation of a solvent molecule with an organic guest yields four particle aggregates in which the guests are confined and restricted into single hemispheres due to the polar requirements of the internal cavity.     

Synthesis and self-assembly of novel calix[4]arenocrowns: formation of calix[4]areno[2]catenanes

A series of novel calix[4]arenocrowns 1a-c were efficiently synthesized by a one-pot reaction of calix[4]monohydroquinone diacetate 5 with ditosylate 6 and its analogues in the presence of sodium hydroxide. It was found that the calix[4]arenocrowns could form stable pseudorotaxane-type complexes 2a-c with paraquat, and further self-assemble into calix[4]areno[2]catenanes 3a-c with dicationic salt 8 and p-bis(bromomethyl)benzene.     

Sterically and guest-controlled self-assembly of calix[4]arene derivatives

In solvents such as chloroform or benzene, tetraurea calix[4]arenes 1 form dimeric capsules in which one solvent molecule is usually included as guest. To explore the structural requirements for the formation of such hydrogen-bonded dimers we replaced one p-tolylurea residue by a simple acetamide function. The resulting calix[4]arene 2 a, substituted at its wide rim with one acetamide and three p-tolylurea functions, assumes a C(1)-symmetrical conformation in apolar solvents as shown by (1)H NMR, which is not compatible with the usual capsule. In the crystalline state, four molecules of 2 a, adopting a pinched cone conformation, assemble into a quasi S(4)-symmetrical tetramer stabilized by a cyclic array of 24 NH.O==C hydrogen bonds and four NH.pi interactions. Four acetamide groups are hydrogen-bonded to each other and pack tightly in the center of the assembly. All polar residues are buried inside the tetramer, the surface of which is lipophilic. Extensive NMR studies revealed similar structures in apolar solvents such as [D]chloroform or [D(6)]benzene for calixacetamides 2 a-c. The formation of these tetramers in solution is critically dependent on the size of the amide fragment, so that propionamide 2 d, butyramide 2 e, and p-tolylamide 2 f form only ill-defined aggregates. This is caused by steric crowding inside the tetrameric assembly. The tetramers persist during molecular dynamics simulations, and the optimized average structure of the MD run is similar to that found in the crystalline state. Theoretical studies revealed that cooperation of hydrogen bonds with multiple NH.pi, C--H.pi, and pi.pi attractions make the tetramer more stable than the capsular dimer with the solvent as guest. In the presence of tetraethylammonium salts, however, compounds 2 a-e form dimeric capsular assemblies, each incorporating a single ammonium cation. Only one of two possible regioisomeric dimers is formed, in which both acetamide groups are surrounded by two urea residues. These examples give striking evidence of how self-assembly in solution can be strongly dependent on subtle structural factors and of how the formation of dimeric capsules can be induced by the presence of an appropriate guest.     

Synthesis and pH-dependent self-assembly of semifluorinated calix[4]arenes

A new series of highly fluorinated calix[4]arene-based amphiphilic molecules was designed and synthesized. Using the calix[4]arene scaffold, four perfluorinated hyper-hydrophobic groups and four water solubilizing chains were introduced in the same molecule and also segregated in space following the scaffold directionality. Upon solubilization in aqueous solutions, these amphiphilic molecules form microscopic fluorous domains that drive the formation of various self-assembly patterns. We found that the self-assembly of these semifluorinated calix[4]arenes is dependent on external stimuli, such as changes in the polarity of the solvent or pH. As a consequence, by changing the pH of the solutions, it is possible to shift the aggregation pattern of these molecules, by a regular change either in the shape or in the size of the initially formed ordered aggregates. These are examples of the variety of structures and possibilities in nano-engineering offered by fluorous-phase driven molecular recognition.     

Functional modification,self-assembly and application of calix[4]resorcinarenes

As a special subset of calix[4]arene, calix[4]resorcinarene is an excellent molecular platform which could be modified by introducing functional groups to multiple sites at the upper and lower rims. There are mainly three ways to build functionalized calix[4]resorcinarene derivatives: (1) modification on the C-2 sites of calix[4]resorcinarenes; (2) modification on the phenolic hydroxyl groups of calix[4]resorcinarenes; (3) modification on the bridging methylenes at lower rim of calix[4]resorcinarenes. Functionalized calix[4]resorcinarene derivatives play an important role in the development of self-assembly chemistry, among which hydrogen bonding and metal coordination are the two most common interactions to obtain multicomponent structures. Moreover, due to the excellent topological structures and various active substituents of functionalized calix[4]resorcinarene derivatives, their applications in various fields, such as nanoparticles, catalysts, fluorescent materials, and sensors, have been briefly presented in this paper.

     

Transition metal-directed self-assembly of calix[4]arene based dithiocarbamate ligands

The transition metal-directed self-assembly of dithiocarbamate ligand functionalized upper and lower rim calix[4]arenes affords novel dimeric bimetallic bis(calix[4]arene) species as determined by a combination of analytical methods including X-ray crystallography. An exception is a zinc(II) dithiocarbamate upper rim calix[4]arene assembly which is monomeric in nature. Electrochemical investigations reveal the bimetallic copper(II) bis(calix[4]arene) systems can electrochemically sense dihydrogen phosphate and carboxylate anions via significant cathodic perturbations of the respective copper(II)/(III) dithiocarbamate oxidation wave.     

Lanthanoid coordination with a tetrazole-substituted calix[4]diquinone and calix[4]dihydroquinone

The tetrazole-functionalised calixdiquinone 5,17-di-tert-butyl-26,28-bis-(1H-tetrazole-5-ylmethoxy)-calix[4]-25,27-diquinone Q was synthesised by chemical oxidation of the bis-tetrazole calix[4]arene precursor using PbO₂/HClO₄. The single crystal X-ray structure determination of Q confirmed the structure and showed binding of a water molecule in the solid state. Chemical reduction of Q to the dihydroquinone QR was achieved using N,N-diethylhydroxylamine. Comparison of the solution phase photophysical properties of Q or QR in the presence of terbium ions showed significant excitation only with QR, suggesting redox switching of the photophysical response may be possible with this or similar receptor.     

Head-to-tail self-assembly of a calix[4]arene inclusion polymer controlled by a pendant arm

A calix[4]arene functionalized at one phenolic group with a pendant ethoxy acetate group, forms an inclusion complex that is stable even in the presence of other potential guest molecules.     

Solution self-assembly and solid state properties of fluorinated amphiphilic calix[4]arenes

A novel amphiphilic semifluorinated calix[4]arene has been shown to exhibit liquid crystalline character and to self-assemble in solvents of varying polarity.     

Wide rim urethanes derived from calix[4]arenes: synthesis and self-assembly

[reaction: see text] Calix[4]arenes 4, substituted at the wide rim by four N-tolyl-urethane groups, were synthesized, as well as derivatives 10a,b bearing two or three tolyl-urea groups beside of one or two urethane group(s). In contrast to tetra-tolyl urea 11, the urethane derivatives do not form hydrogen-bonded, dimeric capsules in CDCl3 or benzene-d6, but the dimerization can be induced for the triurea 10b by tetraethylammonium cations as guests. The quantitative formation of heterodimers is observed for all urethanes 4 and 10a,bin benzene-d6 in mixtures with a "tetra-loop" tetraurea 14, while "bisloop" tetraureas 13 require di- or triurea derivatives 10a,b for a clean heterodimerization.     

Hydrogen-bond self-assembly of DNA-analogues into hexameric rosettes

The self-assembly of a DNA-analogue hexameric rosette from triaminopyrimidine and cyanuric acid-based nucleosides, and its subsequent aggregation into rod-like morphologies is reported.     

Halo-derivatised calix[4]tubes

Halo functionalisation of calix[4]tubes has been investigated through both derivatisation of individual calix[4]arenes and calix[4]tubes, using classical synthetic methods, to allow preparation of a series of novel derivatives. The solution and solid state properties are in accordance with the constituent[4]arenes adopting flattened cone arrangements which on complexation with potassium simplify to a regular cone. Electrospray and 1H NMR studies, combined with molecular modelling have been used to ascertain the metal binding of this new series of cryptand like ionophores, demonstrating their retained selectivity for binding potassium over other Group 1 metals and the dependence on counter anion in the weak binding of silver.     

N-confused calix[4]pyrroles

This is a first review devoted to N-confused calix[4]pyrroles (NCCPs). NCCPs are a relatively recent arrival to the family of the pyrrole-based anion binding macrocycles, being for the first time identified in 1999. Yet, in a relatively short time these calix[4]pyrrole (CP) isomers attracted attention of the community of research groups interested in anion binding and sensing. This is because they are relatively easy to synthesize, but mainly because they posses anion-binding properties that are different from that of regular calix[4]pyrroles. The difference in anion-binding properties stems from a different binding mode between the NCCP and anion. While the regular CPs adopt in the complex an ideal cone-like conformation where all four pyrroles-NHs engage in hydrogen bonding to the anion, the inverted pyrroles do not allow forming the cone. NCCPs bind anions via a confused cone (CC), by three NH hydrogen bonds with an anion and a CH–anion contact. This different binding mode results also in different anion-binding affinity and selectivity compared to regular CPs. Also, the inverted pyrroles offer a unique possibility for selective chemical modification of the receptor. The corresponding colorimetric sensors were tested for anion binding applications. The results of colorimetric assays for anions are presented and potential applications discussed.     

Pentapyrrolic calix[4]pyrrole

A new calix[4]pyrrole has been synthesised that contains a 3,4,5-trisbromopyrrole appended to a meso-position which shows enhanced anion affinity as compared to the parent meso-octamethylcalix[4]pyrrole macrocycle.     

Solid-state caging of 1,10-phenanthroline pi-pi stacked dimers by calix[4]arene dihydroxyphosphonic acid

The calix[4]arene dihydroxyphosphonic acid-1,10-phenanthroline complex shows caging of the guest molecules as a pi-pi stacked dimer in a cavity formed by intermolecular hydrogen bonds and aromatic walls formed by the calixarene.     

一种新型杯[4]芳烃的合成

本文通过对特丁基杯[4]芳烃的酚羟基烷基化和苯环特丁基位上的IPSO-硝化制备了一系列对硝基杯[4]芳烃烷基醚,烷基分别是n-C~4H~9(3a)、n-C~8H~1~7(3b)、n-C~1~2H~2~5(3c)和n-C~1~6H~3~3(3d)。^1HNMR表明所有新的杯[4]芳烃都具有锥形(cone)构象。     

Synthesis and self-assembly of thio derivatives of calix[4]arene on noble metal surfaces

Self-assembled monolayers (SAMs) provide a simple route to functionalize electrode surfaces with organic molecules. Herein we use cavity-containing derivatives of calix[4]arenes in SAMs. Bound to noble metal surface, the assembled molecules are candidates to serve as molecular sieves for H 2 molecules and H (+) ions, which could have relevance for fuel cell applications. Tetra- O-alkylated calix[4]arenes with thiolacetate and thiolamide wide-rim anchoring groups in cone and partial-cone conformations were designed, synthesized and self-assembled onto Au, Pt, and Pd surfaces. The resulting SAMs were systematically examined. Single crystal X-ray diffraction of 5,11,17,23-tetrakis(thioacetyl)-25,26,27,28-tetra- i-propoxycalix[4]arene confirmed the cone conformation and revealed the cavity dimensions of the SAMs that were formed by immersing noble metal substrates (Au, Pt and Pd deposited on Si-wafers) in solutions of calix[4]arenes. Surface characterization techniques including ellipsometry, cyclic voltammetry (CV) and X-ray photoelectron spectroscopy (XPS) were used, indicating that the metal surface is terminated with a monomolecular layer. Experimental thicknesses obtained from the ellipsometry are consistent with the calculated values. CV results showed 50 to 80% physical passivation against the Fe(CN) 6 (3-/4-) couple, implying an overall relatively low concentration of defects and pinholes in the films. The binding energies of the S2p core level in the XPS were consistent with the literature values and revealed that up to 3.2 out of four anchoring groups were bonded to the noble metal surface.