Position difference regularity of corresponding R-wave peaks for maternal ECG components from different abdominal points

We collected 343 groups of abdominal electrocardiogram(ECG) data from 78 pregnant women and deleted the channels unable for experts to determine R-wave peaks from them; then, based on these filtered data, the statistics of position difference of corresponding R-wave peaks for different maternal ECG components from different points were studied. The resultant statistics showed the regularity that the position difference of corresponding maternal R-wave peaks between different abdominal points does not exceed the range of 30 ms. The regularity was also proved using the fECG data from MIT–BIH PhysioBank. Additionally, the paper applied the obtained regularity, the range of position differences of the corresponding maternal R-wave peaks, to accomplish the automatic detection of maternal R-wave peaks in the recorded all initial 343 groups of abdominal signals, including the ones with the largest fetal ECG components, and all 55 groups of ECG data from MIT–BIH PhysioBank, achieving the successful separation of the maternal ECGs.     

Capability of Raman lidar for monitoring the variation of atmospheric CO2 profile

Lidar （Light detection and ranging） has special capabilities for remote sensing of many different behaviours of the atmosphere. One of the techniques which show a great deal of promise for several applications is Raman scattering. The detecting capability, including maximum operation range and minimum detectable gas concentration is one of the most significant parameters for lidar remote sensing of pollutants. In this paper, based on the new method for evaluating the capabilities of a Raman lidar system, we present an evaluation of detecting capability of Raman lidar for monitoring atmospheric CO2 in Hefei. Numerical simulations about the influence of atmospheric conditions on lidar detecting capability were carried out, and a conclusion can be drawn that the maximum difference of the operation ranges caused by the weather conditions alone can reach about 0.4 to 0.5km with a measuring precision within 30ppmv. The range of minimum detectable concentration caused by the weather conditions alone can reach about 20 to 35 ppmv in vertical direction for 20000 shots at a distance of 1 km on the assumption that other parameters are kept constant. The other corresponding parameters under different conditions are also given. The capability of Raman lidar operated in vertical direction was found to be superior to that operated in horizontal direction. During practical measurement with the Raman lidar whose hardware components were fixed, aerosol scattering extinction effect would be a significant factor that influenced the capability of Raman lidar. This work may be a valuable reference for lidar system designing, measurement accuracy improving and data processing.     

Analysis of asymmetry of the Dαemission spectra under the Zeeman effect in boundary region for D-D experiment on EAST tokamak

In 2015 campaign,deuterium atomic emission spectra(D_α)under the Zeeman effect in boundary region had been measured by a high resolution optical spectroscopic multichannel analysis(OSMA)system based on passive spectroscopy during the deuterium plasma discharge on EAST tokamak,and part of the works about the Zeeman effect on D_αspectra had already been done.However,the asymmetric phenomena of D_αemission spectra under the Zeeman effect were observed in process of analyzing the spectral data.To understand the asymmetric phenomena and acquire the useful local plasma information,an algorithm was proposed and used to analyze the asymmetry of the emission spectra under the Zeeman effect with all polarization components(πand±σ).In the algorithm,the neutral atoms were considered to follow the Maxwell distribution on EAST,and I+σ=I-σwas considered and set.Because of the line-averaged spectra along the viewing chord,the emission spectra were considered from two different regions:low-field side(LFS)and high-field side(HFS).Each spectral line was classified into three energy categories(the cold,warm,and hot)based on different atomic production processes in boundary recycling.The viewing angleθ(between the magnetic field B and the viewing chord),magnetic field B at two spectral emission positions(HFS and LFS)and the Doppler shift of all three energy categories of each spectral line were all considered in the algorithm.The effect of instrument function was also included here.The information of the boundary plasma were acquired,the reason for the asymmetric phenomena was discussed,and the boundary recycling during the discharge were studied in the paper.Based on fitting a statistical data of acquired fitting results,an important conclusion was acquired that the ratio of the spectral line intensity in HFS and LFS was proportional to the square of that of the corresponding magnetic field.     

Shear modulus of shock-compressed LY12 aluminium up to melting point

Asymmetric plate impact experiments are conducted on LY12 aluminium alloy in a pressure range of 85-131 GPa. The longitudinal sound speeds axe obtained from the time-resolved particle speed profiles of the specimen measured with Velocity Interferometer System for Any Reflector （VISAR） technique, and they are shown to be good agreement with our previously reported data of this alloy in a pressure range of 20-70 GPa, and also with those of 2024 aluminium reported by McQueen. Using all of the longitudinal speeds and the corresponding bulk speeds calculated from the Gruneisen equation of state （EOS）, shear moduli of LY12 aluminium alloy are obtained. A comparison of the shear moduli in the solid phase region with those estimated from the Steinberg model demonstrate that the latter are systematically lower than the measurements. By re-analysing the pressure effect on the shear modulus, a modified equation is proposed, in which the pressure term of P/η^1/3 in the Steinberg model is replaced by a linear term. Good agreement between experiments and the modified equation is obtained, which implies that the shear modulus of LY12 aluminium varies linearly both with pressure and with temperature throughout the whole solid phase region. On the other hand, shear modulus of aluminium in a solid-liquid mixed phrase region decreases gradually and smoothly, a feature that is very different from the drastic dropping at the melting point under static conditions.     

Ab initio calculations on the α^3∑u^＋ state properties of dimer ^7Li2

The comparison between single-point energy scanning （SPES） and geometry optimization （OPT） in determining the equilibrium geometry of the α^3∑u^＋ state for ^7Li2 is made at numerous basis sets such as 6-311＋＋G（2df）, cc-PVTZ, 6-311＋＋G（2df, p）, 6-311G（3df,3pd）, 6-311＋＋G（2df,2pd）, D95（3df,3pd）, 6-311＋＋G, DGDZVP, 6-311＋＋G（3df,2pd）, 6-311G（2df,2pd）, D95V＋＋, CEP-121G, 6-311＋＋G（d,p）, 6-311＋＋G（2df, pd） and 6-311＋＋G（3df,3pd） in full active space using a symmetry-adapted-cluster/ symmetry-adapted-cluster configuration-interaction （SAC/SAC=CI） method presented in Gaussian03 program package. The difference of the equilibrium geometries obtained by SPES and by OPT is reported. Analyses show that the results obtained by SPES are more reasonable than those obtained by OPT. We have calculated the complete potential energy curves at those sets over a wide internuclear distance range from about 3.0α0 to 37.0α0, and the conclusion is that the basis set cc-PVTZ is the most suitable one. With the potential obtained at ccopVTZ, the spectroscopic data （Te, De, D0, ωe,ωeХe, αe and Be） are computed and they are 1.006 eV, 338.71 cm^-1, 307.12 cm^-1, 64.88 cm^-1, 3.41 cm^-1, 0.0187 cm^-1 and 0.279 cm^-1, respectively, which are in good agreement with recent measurements. The total 11 vibrational states are found at J=0. Their corresponding vibrational levels and classical turning points are computed and compared with available RKR data, and good agreement is found. One inertial rotation constant （By） and six centrifugal distortion constants （Dr Hv, Lv, My, Nv, and Ov） are calculated. The scattering length is calculated to be -27.138α0, which is in good accord with the experimental data.