衬底上石墨烯制备及改性研究

大面积高质量石墨烯的制备对石墨烯电子特性及石墨烯基纳器件相关研究有重要意义。本文综述了近几年来衬底上制备石墨烯的相关实验以及衬底与石墨烯相互作用研究的重要进展。目前,采用化学气相沉积、外延生长等方法可在衬底表面上制备出较大面积、高质量的石墨烯材料。衬底与石墨烯相互作用和界面间晶格匹配、原子成键及电荷转移等密切相关,其对吸附石墨烯的几何结构、能带结构及电子特性等产生明显影响。实验与理论计算的结合可望加深衬底与石墨烯作用机理的理解,指导衬底上石墨烯制备及改性的进一步研究。     

表面活性剂与叶酸的相互作用及其对光氧化降解的影响

表面活性剂与有机小分子作用不仅能提高表面活性剂的聚集能力,还能提高小分子的溶解度、稳定性等应用性能,因此研究二者之间的相互作用机理对于促进表面活性剂的发展和实际应用具有重要意义。本工作提出了一种利用功能有机小分子调控表面活性剂聚集行为,进而提高不稳定小分子自身稳定性的新策略。利用表面张力、紫外可见吸收光谱、荧光光谱、动态光散射、等温滴定量热和核磁共振技术研究了在p H为7.0时,叶酸分别与十二烷基硫酸钠(SDS)、十二烷基三甲基溴化铵(DTAB)、季铵盐Gemini 12-6-12和季铵盐线性三聚12-3-12-3-12四种表面活性剂之间的相互作用及其导致的叶酸光氧化降解性能的变化,结果表明,阴离子表面活性剂SDS抑制叶酸光氧化降解的效率较低,而阳离子表面活性剂都能够显著抑制叶酸的光氧化降解,且随着表面活性剂寡聚度的增加,抑制效果增强,所需表面活性剂的浓度显著降低,寡聚表面活性剂12-3-12-3-12的抑制效率高达96%。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

火场助燃剂检验鉴定的干扰研究进展

火灾是影响公共安全最为常见的灾害之一,而放火更是严重威胁人民群众生命财产安全,属于典型的暴力犯罪.犯罪嫌疑人为了达到有效快速放火的目的,往往使用助燃剂实施放火,因而助燃剂的检验鉴定对于认定火灾性质起着至关重要的作用.然而火场情况复杂,容易对助燃剂物证检验鉴定产生较大干扰.在火灾发生发展的过程中,火场高温热环境会作用于已...     

Contributions to the Chemistry of the Binary Compounds of the Transition Elements

Phase and structural relationships of the sulfur, selenium, and tellurium compounds of the 4d and 5d transition elements of groups IV to VII of the periodic system are discussed. Homologous elements behave very similarly with respect to the chalcogens, and this is particularly the case for niobium and tantalum, and for molybdenum and tungsten. However, zirconium, niobium, and molybdenum have a greater tendency towards formation of chalcogen-poor phases than their homologues hafnium, tantalum, and tungsten. Subchalcogenides are known only for zirconium and niobium. The number of phases and the tendency towards formation of solid solutions are considerably smaller among the tellurides than among the sulfides and selenides. The crystal structures of the telluride phases also differ from those of the sulfide and selenide phases of analogous composition. In addition, a review of the phase and structural relationships of the arsenic and antimony compounds of the 4d and 5d transition elements of groups V to VII is given.     

MISCIBILITY AND MORPHOLOGY OF THIN FILMS OF BLENDS OF POLYSTYRENE WITH BROMINATED POLYSTYRENES： EFFECTS OF VARYING THE MOLECULAR WEIGHT, BROMINATION DEGREE AND ANNEALING

Thin films of incompatible polymer blends can form a variety of structures during preparation and subsequent annealing process. For the polymer blend system consisting of polystyrene and poIy(styrene-co-p-bromo-styrene), i.e., PS/PBrxS, its compatibility could be adjusted by varying the degree of bromination and the molecular weight of both components comprised, in this paper, surface chemical compositions of the cast and the annealing films were investigated by X-ray photoelectron spectroscopy (XPS) and contact angle measurement; meanwhile, surface topographical changes are followed by atomic force microscopy (AFM). In addition, substantial attention was paid to the effect of annealing on the morphologic variations induced by phase separation and/or dewetting of the thin film. Moreover, the influences of the molecular weight, Aw, as well as the brominated degree, x%, on the sample surface are explored systematically, and the corresponding observations are explained in virtue of the Flory-Huggins theory, along with the dewetting of the polymer thin film.     

Self-Assembling Drug Formulations with Tunable Permeability and Biodegradability

This review focuses on key topics in the field of drug delivery related to the design of nanocarriers answering the biomedicine criteria, including biocompatibility, biodegradability, low toxicity, and the ability to overcome biological barriers. For these reasons, much attention is paid to the amphiphile-based carriers composed of natural building blocks, lipids, and their structural analogues and synthetic surfactants that are capable of self-assembly with the formation of a variety of supramolecular aggregates. The latter are dynamic structures that can be used as nanocontainers for hydrophobic drugs to increase their solubility and bioavailability. In this section, biodegradable cationic surfactants bearing cleavable fragments are discussed, with ester- and carbamate-containing analogs, as well as amino acid derivatives received special attention. Drug delivery through the biological barriers is a challenging task, which is highlighted by the example of transdermal method of drug administration. In this paper, nonionic surfactants are primarily discussed, including their application for the fabrication of nanocarriers, their surfactant-skin interactions, the mechanisms of modulating their permeability, and the factors controlling drug encapsulation, release, and targeted delivery. Different types of nanocarriers are covered, including niosomes, transfersomes, invasomes and chitosomes, with their morphological specificity, beneficial characteristics and limitations discussed.     

多极性基有机添加物对非离子表面活性剂溶液雾点的影响

测定了甲酸、乙酸、草酸、甲醇、乙醇、丙醇、乙二醇、丙三醇和葡萄糖对非离子表面活性剂Triton X-100和Triton X-114水溶液雾点的影响。低级脂肪酸和醇能使雾点升高, 升高的程度随酸或醇的碳氢链的增长而增加。但若在增加分子碳氢链长或碳氢部分的同时引入更多的羧基或羟基, 则雾点升高的效应将受到抑制。当极性基数目较多时, 可导致雾点显著下降。     

酞菁染料的金属化和溴化与光物理影响的研究

以α位(2,4-二特戊基)苯氧基邻苯二腈作为环合前体,制备了多种金属酞菁,产物经元素分析、紫外、红外、核磁氢谱等分析手段进行表征.并选择了部分酞菁进行溴化,其中着重研究了不同中心金属以及溴化对染料Q带吸收的影响.结果表明,酞菁染料的金属化对于其Q带吸收影响很大,多数染料金属化后会出现蓝移,而选择合适的条件进行溴化,可以使得金属酞菁的Q带吸收出现一定程度的红移,其中部分溴化金属酞菁的吸收波长与光信息产业中使用的近红外激光器很接近,具有潜在的实用价值.     

A NOVEL APPROACH TO RHEOLOGICAL CHARACTERIZATION FOR THE GELATION IN POLYMER CRYSTALLIZATION

The isothermal crystallizations of three kinds of commercial isotactic polypropylene have been studied by DSC and rheometric experiments, in a range of temperatures where the rate of crystallization is moderate. As the crystallization proceeds, volume contraction induces tensile force upon the parallel plates. The tensile force relaxed quickly in liquid states,but after a critical amount of the relative crystallinity, it starts to accumulate in the static test, that is, with the motionless parallel plates. A new method to determine the liquid-solid transition by the static tensile force is proposed and compared with two dynamic methods of detecting liquid-solid transition, that is, the power-law modulus theory and the yield modulus model. The tensile force method predicted considerably earlier transition than the dynamic methods, and the corresponding DSC data indicate relative crystallinity of larger than 0.2 at the transition times. The limitation of dynamic methods and other possible errors have been analyzed. While the dynamic methods are suitable for slow crystallization, the tensile force method is more appropriate for the crystallization of moderate rates. Moreover, it has the advantage of almost not disturbing the crystallizing materials before the transition.     

纳米粒子与细胞相互作用的力学-化学偶联研究进展

纳米粒子在生物医学和大气环境领域的广泛研究使得其生物安全性越来越受到重视。目前已经有许多研究关注纳米粒子与细胞的相互作用及细胞毒性问题。本综述从细胞力学-化学偶联的角度总结了近五年来有关纳米粒子与细胞相互作用的研究进展。首先介绍了与细胞力学-化学偶联性质相关的分子基础以及目前检测细胞机械性质的纳米技术,然后重点讨论了纳米粒子对细胞粘附、骨架、刚度和迁移性质的影响。在此基础上,进一步指出了纳米生物力学-化学偶联的挑战与展望。     

Essential Oil of Cannabis sativa L: Comparison of Yield and Chemical Composition of 11 Hemp Genotypes

Cannabis sativa L. is an annual species cultivated since antiquity for different purposes. While, in the past, hemp inflorescences were considered crop residues, at present, they are regarded as valuable raw materials with different applications, among which extraction of the essential oil (EO) has gained increasing interest in many fields. The aim of the present study is the evaluation of the yield and the chemical composition of the EO obtained by hydrodistillation from eleven hemp genotypes, cultivated in the same location for two consecutive growing seasons. The composition of the EOs was analyzed by GC–MS, and then subjected to multivariate statistical analysis. Sesquiterpenes represented the main class of compounds in all the EOs, both in their hydrocarbon and oxygenated forms, with relative abundances ranging from 47.1 to 78.5%; the only exception was the Felina 32 sample collected in 2019, in which cannabinoids predominated. Cannabinoids were the second most abundant class of compounds, of which cannabidiol was the main one, with relative abundances between 11.8 and 51.5%. The statistical distribution of the samples, performed on the complete chemical composition of the EOs, evidenced a partition based on the year of cultivation, rather than on the genotype, with the exception of Uso-31. Regarding the extraction yield, a significant variation was evidenced among both the genotypes and the years of cultivation.     

苯丙胺类、氯胺酮、卡西酮类毒品手性分离的研究进展

对映异构体在自然界中普遍存在,在药物化学领域尤为突出。虽然手性药物的对映异构体之间具有相同的化学结构,但它们在药理、毒理、药代动力学、代谢等生物活性方面存在明显差异。苯丙胺类、氯胺酮、卡西酮类毒品也是如此,这3类毒品的手性分离研究在常见毒品中具有代表性。目前常用的手性分离色谱方法有气相色谱法(GC)、高效液相色谱法(HPLC)和毛细管电泳法(CE)。苯丙胺类、氯胺酮、卡西酮类毒品使用以上3种方法进行的手性分离研究具有一定共性:GC较多使用N-三氟乙酰-L-脯胺酰氯和(+)R-α-甲氧基α-三氟甲基苯乙酸两种典型的手性衍生化试剂,HPLC主要应用蛋白质类、多聚糖类和大环抗生素类3种手性固定相,CE中环糊精及其衍生物是最常用的手性选择剂。然而这3种手性分离方法存在各自的不足,GC存在手性衍生化引入杂质、反应温度高影响手性分离等问题,HPLC的应用范围比较有限,成本较高,CE没有明确的方法判断哪种物质是合适的手性选择剂。近年来,这3类毒品的手性分离研究在法医毒物学领域的应用有各自的特点,苯丙胺类毒品的手性分离研究多用于推断市场上毒品的原型及合成路线,氯胺酮的手性分离研究涉及多种生物检材,卡西酮类毒品侧重于手性分离方法的广泛适用性。该文主要遴选近10年国内外核心期刊的文献,对苯丙胺类、氯胺酮、卡西酮类毒品的手性异构体特点及色谱法的手性识别机理进行简单介绍,重点对已有研究的共性以及手性分离在法医毒物学中的应用等内容进行综述。基于以上研究,该文提出未来可以从以下3个方面进行深入研究:一是利用计算机技术建立分子模型深入探究手性识别机理;二是研发新型技术,对超临界流体法进行商用研究;三是将手性分离应用于司法实践、医药研发等实际工作领域。     

Rheological Characterization of Alumina Ceramic Suspensions in Presence of a Dispersant and a Binder

The rheological responses of aqueous alumina suspensions, stabilized with an organic polyvalent salt dispersant called “Aluminon,” and including a poly(vinyl) alcohol (PVA) binder, are described in this study. It is observed that the addition of PVA, without any dispersant does not significantly influence the rheology. However, in the presence of the dispersant the rheology is affected significantly. At a given concentration of the dispersant, the viscosity, the storage and loss modulii all increase with the PVA concentration. Also, for a given concentration of the PVA, the viscosity, the storage and loss modulii values increases as the concentration of the dispersant is increased. At relatively low PVA concentrations, an excess concentration of the dispersant, causes flocculation of the particles in the suspension by a reduction of the electrostatic (double layer) effect. On the contrary, at higher concentrations of the PVA the flocculation of the suspension occurs via a depletion mechanism.     

纳米粒子的精准组装

纳米材料由于其独特的光、电、磁、力学等性质,成为了构建功能材料与器件的理想基元。实现纳米粒子的精确组装,是探究粒子之间的耦合聚集性质和制备宏观功能器件的基础。但是由于纳米粒子的小尺寸以及在溶液中运动的随机性与复杂性,精准控制纳米粒子组装体的形貌以及在空间中的相对位置仍存在巨大挑战。为了将纳米粒子组装成理想的有序结构,许多控制粒子组装的策略与方法得到发展。本文首先概述了纳米粒子自组装的控制方法与典型形貌,着重分析了影响粒子精准排布的因素与控制方法,并对纳米粒子及其组装体的光学性质与器件应用的最新研究进展进行了讨论,最后对目前纳米粒子精准组装所面临的挑战以及未来发展的方向进行了展望。     

Diffusion of symmetrical and spherical solutes in protic,aprotic, and hydrocarbon solvents

The diffusion coefficients of a series of symmetrical tetraalkyltins (tetramethyltin, tetraethyltin, tetrapropyltin, tetrabutyltin, tetradodecyltin) of the gases argon, krypton, xenon, methane, and tetramethylmethane and of carbon tetrachloride and tetraethylmethane in hexane, decane, and tetradecane at 25°C have been determined using the Taylor dispersion technique. Diffusion coefficients for the gases in acetone, 2-propanol, 1-butanol, and 1-octanol were also determined. Deviations from the predictions of Stokes' law were found to be large, and the magnitude of the deviation can be directly related to solute size. The predictions of the Hubbard-Onsager equation were tested using the diffusion data.     

光催化CO2还原的超薄层状催化剂

The acceleration of industrialization and the continuous upgradation of consumption structure has increased the atmospheric content of CO₂ far beyond the past levels, leading to a serious global environmental problem. Photocatalytic reduction of CO₂ is one of the most promising methods to solve the problem of rising atmospheric CO₂ content. The core of this technology is to develop efficient, environment-friendly, and affordable photocatalysts. A photocatalyst is a semiconductor that can absorb photons from sunlight and produce electron-hole pairs to initiate a redox reaction. Owing to their low specific surface areas, significant electron-hole recombination, and less surface-active sites, bulk photocatalysts are not satisfactory. Ultrathin layered materials have shown great potential for photocatalytic CO₂ reduction owing to their characteristics of large specific surface area, a large number of low-coordination surface atoms, short transfer distance from the inside to the catalyst surface, along with other advantages. Photoexcited electrons only need to cover a short distance to transfer to the nanowafer surface, and the speed of migrating electrons on the nanowafer surface is much higher than that in the layers or in the bulk catalyst. The ultrathin structure leads to significant coordinative unsaturation and even vacancy defects in the lattice structure of the atoms; while the former can be used as active sites for CO₂ adsorption and reaction, the latter can improve the separation of the electron-hole pair. This review summarizes the latest developments in ultrathin layered photocatalysts for CO₂ reduction. First, the photocatalytic reduction mechanism of CO₂ is introduced briefly, and the factors governing product selectivity are explained. Second, the existing catalysts, such as g-C₃N₄, black phosphorus (BP), graphene oxide (GO), metal oxide, transition metal dichalcogenides (TMDCs), perovskite, BiOX (X = Cl, Br, I), layered double hydroxide (LDH), 2D-MOF, MXene, and two-dimensional honeycomb-like Ge―Si alloy compounds (gersiloxenes), are classified. In addition, the prevalent preparation methods are summarized, including mechanical stripping, gas stripping, liquid stripping, chemical etching, chemical vapor deposition (CVD), template method, self-assembly of surfactant, and the intermediate precursor method of lamellar Bi-oleate complex. Finally, we introduced the strategy of improving photocatalyst performance on the premise of maintaining its layered structure, including the factors of thickness adjustment, doping, structural defects, composite, etc. The future opportunities and challenges of ultrathin layered photocatalysts for the reduction of carbon dioxide have also been proposed.     

Multi-Elemental Analysis of Wine Samples in Relation to Their Type,Origin, and Grape Variety

Wine is one of the most popular alcoholic beverages. Therefore, the control of the elemental composition is necessary throughout the entire production process from the grapes to the final product. The content of some elements in wine is very important from the organoleptic and nutritional points of view. Nowadays, wine studies have also been undertaken in order to perform wine categorization and/or to verify the authenticity of products. The main objective of this research was to evaluate the influence of the chosen factors (type of wine, producer, origin) on the levels of 28 elements in 180 wine samples. The concentration of studied elements was determined by ICP-MS (Ag, B, Ba, Be, Bi, Cd, Co, Cr, Cu, Li, Mn, Mo, Ni, Pb, Rb, Sb, Sn, Sr, Te, Tl, U, Zn), ICP-OES (Ca, Fe, K, Mg, Ti), and CVAAS (Hg) techniques in 79 red, 75 white, and 26 rose wine samples. In general, red wines contained higher values of mean and median of B, Ba, Cr, Cu, Mn, Sr and Zn in contrast to other wine types (white and rose). In white wines (when compared to red and rose wines) higher levels of elements such as Ag, Be, Bi, Cd, Co, Li, K and Ti were determined. In contrast, rose wines were characterized by a higher concentration of Fe and U. The study also revealed that in the case of 18 samples, the maximum levels of some metals (Cd—8 samples, Pb—9 samples, Cu—1 sample) were slightly exceeded according to the OIV standards, while for Zn and Ti in any wine sample the measured concentrations of these metals were above the permissible levels. Thus, it can be stated that the studied wines contained, in general, lower levels of heavy metals, suggesting that they should have no effect on the safety of consumption. The results also showed higher pH level for red wines as a consequence of the second fermentation process which is typically carried out for this type of wine (malolactic fermentation). The highest median value of pH was reported for Merlot-based wines, while the lowest was for Riesling. It is assumed that dry Riesling has a higher content of tartaric and malic acid than dry Chardonnay grown in the same climate. From all of the studied countries, wines from Poland seemed to present one of the most characteristic elemental fingerprints since for many elements relatively low levels were recorded. Moreover, this study revealed that also wine samples from USA and Australia can be potentially discriminated from the rest of studied wines. For USA the most characteristic metal for positive identification of the country of origin seems to be uranium, whereases for Australia – strontium and manganese. Based on the highly reduced set of samples, it was not possible to differentiate the studied wine products according to the grape variety other than Syrah, and partially Chardonnay. Since all the Syrah-based samples originated from the same country (Australia) thus, the observed grouping should be more related with the country of origin than the grape variety.     

Computer Simulation of the Structure of Porous Electrodes with an Immobilized Enzyme and Nanosized Support Particles

The efficiency of the operation of a porous electrode with an immobilized enzyme is defined, in particular, by a lucky structure of its active layer, which can contain nanosized particles of the support. The composites of such a kind are prepared with the aid of methods of colloidal chemistry. The aim of this particular investigation is to perform a computer simulation of processes of coagulation of particles of the support and their possible heterocoagulation with molecules of the enzyme. Algorithms of the formation of nanocomposite structures in solution are suggested. Calculations show that the concentration of the enzyme molecules in the nanocomposite structures cannot exceed a certain critical value. On the other hand, at a fixed value of the concentration of the enzyme molecules, the concentration of the support particles must not fall below a certain threshold quantity, which provides for the passing of current through the active layer. In order for all the enzyme molecules, rather than for a fraction of these, in the composite to take part in the process of bioelectrocatalysis, the concentration of support particles must be increased even higher, to an optimum value.__________Translated from Elektrokhimiya, Vol. 41, No. 6, 2005, pp. 738–747.Original Russian Text Copyright © 2005 by Chirkov, Rostokin.     

Comparative Analysis of Polysaccharides from Two Ecological Types of Leymus chinensis

Leymus chinensis(Trin.) Tzvel., widely distributed at eastern Eurasian steppe and divided into gray-green type and yellow-green type, has different stress resistance to environment. In the present study, the water-soluble polysaccharides from two ecotypes of L. chinensis were analyzed in detail, and the differences between polysaccharides from the two ecotypes of L. chinensis in the yield, monosaccharide composition, molecular weight and structure were clarified. The polysaccharides of L. chinensis were composed of both neutral and acidic polysaccharides. The neutral polysaccharides contained mannose, glucose, galactose, xylose and arabinose, and mainly consisted of β-1,4-Glcp, α-1,3-Galp and α-1,2-Xylp residues. The acidic polysaccharides contained mannose, rhamnose, glucuronic acid, galacturonic acid, glucose, galactose, xylose and arabinose. However, the yields, monosaccharides contents and the molecular weights of the polysaccharides from the two ecotypes of L. chinensis were different. Moreover, the resistance type(gray-green type) of L. chinensis contained a number of α-1,3-Manp and reducing end of β-Glcp residues, and much more O-methyl groups than normal type(yellow-green type) of L. chinensis. The differences of the polysaccharides of the two ecotypes of L. chinensis might be due to the long-term environmental adaptability of plant, and the differences of the polysaccharides might influence the stress resistance of L. chinensis.