Mechanism of the hydroxycarbonylation of 1-hexene catalyzed by immobilized rhodium complexes of pyridine ligands

Summary In this work, a mechanistic study of the hydroxycarbonylation of 1-hexene to heptanoic acid and the water gas shift reaction (WGSR) catalyzed by the rhodium(I) complexes, [Rh(COD)(amine)₂](PF₆) (COD = 1,5-cyclooctadiene, amine = 4-picoline, 3-picoline, 2-picoline, pyridine, 3,5-lutidine or 2,6-lutidine) immobilized on poly(4-vinylpyridine) in contact with water under CO is discussed. Catalytic cycles for these reactions bearing common Rh-H catalytic species are proposed.     

Synthesis and structural characterisation of rhodium hydride complexes bearing N-heterocyclic carbene ligands

Addition of excesses of N-heterocyclic carbenes (NHCs) IEt₂Me₂, IⁱPr₂Me₂ or ICy (IEt₂Me₂ = 1,3-diethyl-4,5-dimethylimidazol-2-ylidene; IⁱPr₂Me₂ = 1,3-diisopropyl-4,5-dimethylimidazol-2-ylidene; ICy = 1,3-dicyclohexylimidazol-2-ylidene) to [HRh(PPh₃)₄] (1) affords an isomeric mixture of [HRh(NHC)(PPh₃)₂] (NHC = IEt₂Me₂ (cis-/trans-2), IⁱPr₂Me₂ (cis-/trans-3), ICy (cis-/trans-4) and [HRh(NHC)₂(PPh₃)] (IEt₂Me₂(cis-/trans-5), IⁱPr₂Me₂ (cis-/trans-6), ICy (cis-/trans-7)). Thermolysis of 1 with the aryl substituted NHC, 1,3-dimesityl-4,5-dihydroimidazol-2-ylidene (IMesH₂), affords the bridging hydrido phosphido dimer, [{(PPh₃)₂Rh}₂(μ-H)(μ-PPh₂)] (8), which is also the reaction product formed in the absence of carbene. When the rhodium precursor was changed from 1 to [HRh(CO)(PPh₃)₃] (9) and treated with either IMes (=1,3-dimesitylimidazol-2-ylidene) or ICy, the bis-NHC complexes trans-[HRh(CO)(IMes)₂] (10) and trans-[HRh(CO)(ICy)₂] (11) were formed. In contrast, the reaction of 9 with IⁱPr₂Me₂ gave [HRh(CO)(IⁱPr₂Me₂)₂] (cis-/trans-12) and the unusual unsymmetrical dimer, [(PPh₃)₂Rh(μ-CO)₂Rh(IⁱPr₂Me₂)₂] (13). The complexes trans-3, 8, 10 and 13 have been structurally characterised.     

Stepwise formation of metallo-prisms of iridium and rhodium complexes bearing pentamethylcyclopentadienyl ligands

Reactions of [M(Cp^∗)Cl(μ-Cl)]₂ (M = Ir(1a); M = Rh(1b)) with tridentate ligands tpt (tpt = 2,4,6-tripyridyl-1,3,5-triazine) gave the corresponding trinuclear complexes [M₃(Cp^∗)₃(μ₃-4-tpt-κN)Cl₆] (M = Ir(2a); M = Rh(2b)), which can be converted into hexanuclear complexes [M₆(Cp^∗)₆(μ₃-4-tpt-κN)₂(μ-Cl)₆](O₃SCF₃)₆ (M = Ir(3a); M = Rh(3b)) by treatment with AgO₃SCF₃, respectively. X-ray of 3b revealed that each of six pentamethylcyclopentadienyl metal moieties was connected by two μ-Cl-bridged atoms and a tridentate ligand to construct a cation triangular metallo-prism cavity with the volume of about 273 Å³ based on the distance of the two triazine moieties is 3.62 Å.     

Copper(II) complexes bearing cyclobutanecarboxylate and pyridine ligands: a new series of dinuclear paddle-wheel complexes

Monatshefte für Chemie - Chemical Monthly - Four members of a new series of paddle-wheel copper(II) complexes bearing cyclobutanecarboxylate as bridging ligand with pyridine derived ligands in...     

Highly enantioselective hydrosilylation of simple ketones catalyzed by rhodium complexes of P-chiral diphosphine ligands bearing tert-butylmethylphosphino groups

P-Chiral diphosphine ligands, (S,S)-1,2-bis(tert-butylmethylphosphino)ethane [(S,S)-t-Bu-BisP¹], (R,R)-bis(tert-butylmethylphosphino)methane [(R,R)-t-Bu-MiniPHOS], and (R,R)-2,3-bis(tert-butylmethylphosphino)quinoxaline [(R,R)-QuinoxP¹], were applied to the rhodium-catalyzed enantioselective hydrosilylation of simple ketones. The corresponding secondary alcohols were obtained in high yields with good to excellent enantiomeric excesses of up to 99%.     

Catalysis of hydrosilylation by well-defined rhodium siloxide complexes immobilized on silica

Rhodium surface siloxide complexes were prepared directly by condensation of the molecular precursors ([{Rh(μ-OSiMe₃)(cod)}₂], [{Rh(μ-OSiMe₃)(tfb)}₂], [{Rh(μ-OSiMe₃)(nbd)}₂]) with silanol groups on silica surface (Aerosil 200 and SBA-15) and their structures were characterized by ¹³C and ²⁹Si CP/MAS NMR spectroscopy. Such single-site complexes were tested for their activity in hydrosilylation of carbon–carbon double bonds with triethoxysilane, heptamethyltrisiloxane and poly(hydro,methyl)(dimethyl)siloxane. The best catalyst appeared to be cyclooctadiene ligand-containing rhodium siloxide complex immobilized on Aerosil which was recycled as many as 20 times without loss of activity and selectivity in hydrosilylation of vinylheptamethyltrisiloxane with heptamethyltrisiloxane. On the ground of CP/MAS NMR measurements it was established that the mechanism of hydrosilylation catalyzed by silica-supported rhodium siloxide complexes is different from that for the complexes in the homogeneous system.     

Mechanistic aspects of (CC) isomerization in vinylic rhodium(III) complexes

Observations concerning the (CC) isomerization of several vinylic Rh^III complexes suggest an intramolecular pathway; isomerization occurs at a rate which is affected by the backbonding ability of the metal and the π-acidity of the vinylic ligand in the complex.     

Probing the stereo‐electronic properties of cationic rhodium complexes bearing chiral diphosphine ligands by 103Rh NMR

¹⁰³Rh NMR represents a powerful tool to assess the global electronic and steric contribution of diphosphine ligands on [Rh(COD)(diphosphine)]⁺ complexes. In the case of DIOP, BINAP and MeDUPHOS, this approach proved to be more informative than classical CO‐stretching frequency measurements. After validation, this method has been extended to a set of seven diphosphines. ¹⁰³Rh NMR measurements on [Rh(COD)(diphosphine)]PF₆ lead to the following order of donor properties: dppe > MeBPE > MeDUPHOS > dppb > DIOP > BINAP > Tol‐BINAP. This trend has been validated by DFT in the case of DIOP, BINAP and MeDUPHOS. In conjunction, ³¹P NMR chemical shift has been shown to reflect the ring constraints of the Rh‐diphosphine scaffold. This contribution is a step towards a mechanistic investigation of the catalytic hydrogenation of unsaturated substrates by ¹⁰³Rh NMR and DFT. Copyright © 2010 John Wiley & Sons, Ltd.     

Binuclear complexes of rhodium bridged by some new bifunctional anionic ligands

Reaction of the binuclear complexes [Rh(μ-Cl)(COD)]₂ with the bifunctional anionic 8-hydroxyquinolinate, 2-mercaptoquinolinate, and 2-hydroxysalicylaldiminate groups yields the binuclear complexes [Rh(μ-XY)(COD)]₂, where XY⁻ are the anionic groups listed. The complexes have been fully characterized by ¹H and ¹³C NMR spectroscopy.     

Optically active rhodium complexes with indenyl-linked phosphane ligands

The optically active indenyl-linked phosphane ligands (S)-[2-(3H-inden-1-yl)-1-phenylethyl]diphenylphosphane (L₁) and (S)-[2-(4,7-dimethyl-3H-inden-1-yl)-1-phenyl-ethyl]diphenylphosphane (L₂) were synthesized in three steps from (R)-1-phenylethane-1,2-diol in excellent yields. Their lithium salts reacted with [Rh(μ-Cl)(η²-CH₂CH₂)₂]₂ at −78 °C in THF affording the planar chiral complexes (S,R_pl + S_pl)-[Rh(η⁵-indenyl-CH₂CH(Ph)PPh₂-kP)(η²-CH₂CH₂)] and (S,R_pl + S_pl)-[Rh(η⁵-4,7-dimethylindenyl-CH₂CH(Ph)PPh₂-kP)(η²-CH₂CH₂)] as 61:39 and 15:85 mixtures of diastereomers. The complexes were isolated in optically pure form by column chromatography. The stereochemical configuration of one of the diastereomers was determined by X-ray crystallography. The complexation of L₂ was studied in different solvents and with several Rh precursors and diastereomeric excesses up to 76% were achieved. The ability of the chiral ligands to control the stereochemistry at the metal center was tested by oxidative addition of methyl iodide. Diastereomeric excesses greater than 98% were observed.     

Ruthenium and rhodium nitrosyl complexes containing dichalcogenoimidodiphosphinate ligands

Interaction of [Ru(NO)Cl₃(PPh₃)₂] with K[N(R₂PS)₂] in refluxing N,N-dimethylformamide afforded trans-[Ru(NO)Cl{N(R₂PS)₂}₂] (R = Ph (1), Prⁱ (2)). Reaction of [Ru(NO)Cl₃(PPh₃)₂] with K[N(Ph₂PSe)₂] led to formation of a mixture of trans-[Ru(NO)Cl{N(Ph₂PSe)₂}₂] (3) and trans-[Ru(NO)Cl{N(Ph₂PSe)₂}{Ph₂P(Se)NPPh₂}] (4). Reaction of Ru(NO)Cl₃ · xH₂O with K[N(Ph₂PO)₂] afforded cis-[Ru(NO)(Cl){N(Ph₂PO)₂}₂] (5). Treatment of [Rh(NO)Cl₂(PPh₃)₂] with K[N(R₂PQ)₂] gave Rh(NO){N(R₂PQ)₂}₂] (R = Ph, Q = S (6) or Se (7); R = Prⁱ, Q = S (8) or Se (9)). Protonation of 8 with HBF₄ led to formation of trans-[Rh(NO)Cl{HN(Prⁱ₂PS)₂}₂][BF₄]₂ (10). X-ray diffraction studies revealed that the nitrosyl ligands in 2 and 4 are linear, whereas that in 9 is bent with the Rh–N–O bond angle of 125.7(3)°.     

Ruthenium, osmium and rhodium complexes of polypyridyl ligands: Metal-promoted activities, stereochemical aspects and electrochemical properties

This article presents a brief overview of the reactions of2,4,6-tris(2-pyridyl)-1,3,5-triazine (tptz) in presence of rhodium(III), ruthenium(II) and osmium(II) under various experimental conditions. Under certain experimental conditions tptz exhibits metal-assisted hydrolysis/hydroxylation at the triazine ring. However, synthetic methods have also been developed to prepare complexes with intact tptz. Molecular structures of some of the complexes, especially stereoisomers of the hydroxylated products, are established by single crystal X-ray studies. A critical analysis of all data suggests that the electron-withdrawing effect of the metal ion (L→Mσ donation) is the predominant factor, rather than angular strain, that is responsible for metal-promoted reactivities. Electrochemical properties of all of these complexes have been investigated, Rh(III) complexes are excellent catalysts for electrocatalytic reduction of CO₂, and dinuclear Ru(II) and Os(II) complexes exhibit strong electronic communication between the metal centres.     

Half-sandwich cyclopentadienyl rhodium complexes bearing pendant sulfur or oxygen ligands and their catalytic behaviors in ethylene polymerization

Two half-sandwich rhodium complexes with sulfur or oxygen functionalized cyclopentadienyl ligands [η⁵-C₅H₄(CH₂)₂SCH₂CH₃]RhI₂3, {[η⁵-C₅H₄(CH₂)₂OCH₃]RhI₂}₂4 have been synthesized and characterized by IR, ¹H-NMR spectra and Elemental analyses. The molecular structures of complexes 3 and 4 have been determined by X-ray crystallographic analysis. Complexes 3, 4 with a pendent arm on cyclopentadienyl ligand have been tested as catalysts for ethylene and norbornene polymerization in the presence of MAO. Complexes 3 and 4 kept high activities of ca. 10⁶ g PE mol⁻¹ Rh h⁻¹ with morderate molecular weight (M_w ≈ 10⁵ g mol⁻¹) of polyethylene in the ethylene polymerization. Catalytic activities, molecular weights of polyethylene have been investigated under the various reaction conditions.     

(1,2,3,4,7-Pentamethylindenyl)rhodium complexes with arene ligands

The reaction of (η⁵-C₉H₂Me₅)Rh(1,5-C₈H₁₂) (1) with I₂ gives the iodide complex [(η⁵-C₉H₂Me₅)RhI₂]₂ (2). The solvate complex [(η⁵- C₉H₂Me₅)Rh(MeNO₂)₃]²⁺ (generated in situ by treatment of 2 with Ag⁺ in nitromethane) reacts with benzene and its derivatives giving the dicationic arene complexes [(η⁵-₉H₂Me₅)Rh(arene)]²⁺ [arene = C₆H₆ (3a), C₆Me₆ (3b), C₆H₅OMe (3c)]. Similar reaction with the borole sandwich compound CpRh(η⁵-C₄H₄BPh) results in the arene-type complex [CpRh(μ-η⁵:η⁶-C₄H₄BPh)Rh(η⁵-C₉H₂Me₅)]²⁺ (4). Treatment of 2 with CpTl in acetonitrile affords cation [(η⁵-C₉H₂Me₅)RhCp]⁺ (5). The structure of [3c](BF₄)₂ was determined by X-ray diffraction. The electrochemical behaviour of complexes prepared was studied. The rhodium-benzene bonding in series of the related complexes [(ring)Rh(C₆H₆)]²⁺ (ring = Cp, Cp^∗, C₉H₇, C₉H₂Me₅) was analyzed using energy and charge decomposition schemes.     

Synthesis and characterization of half-sandwich iridium(III) and rhodium(III) complexes bearing organochalcogen ligands

Reactions of [Cp*M(μ-Cl)Cl]₂ (M = Ir, Rh; Cp* = η⁵-pentamethylcyclopentadienyl) with bi- or tri-dentate organochalcogen ligands Mbit (L1), Mbpit (L2), Mbbit (L3) and [Tm^Me]⁻ (L4) (Mbit = 1,1′-methylenebis(3-methyl-imidazole-2-thione); Mbpit = 1,1′-methylene bis (3-iso-propyl-imidazole-2-thione), Mbbit = 1,1′-methylene bis (3-tert-butyl-imidazole-2-thione)) and [Tm^Me]⁻ (Tm^Me = tris (2-mercapto-1-methylimidazolyl) borate) result in the formation of the 18-electron half-sandwich complexes [Cp*M(Mbit)Cl]Cl (M = Ir, 1a; M = Rh, 1b), [Cp*M(Mbpit)Cl]Cl (M = Ir, 2a; M = Rh, 2b), [Cp*M(Mbbit)Cl]Cl (M = Ir, 3a; M = Rh, 3b) and [Cp*M(Tm^Me)]Cl (M = Ir, 4a; M = Rh, 4b), respectively. All complexes have been characterized by elemental analysis, NMR and IR spectra. The molecular structures of 1a, 2b and 4a have been determined by X-ray crystallography.     

Hydrosilylation of alkenes catalysed by rhodium complexes immobilized on silica via a pyridine group

2-(2-Trimethoxysilylethyl)pyridine, together with 3-methcryloxypropyltrimethoxysilane, was used to prepare a series of rhodium carbonyl complexes bound to silica via a pyridine group. The rhodium complex Rh₂(CO)₄Cl₂ (Rh₂) was used as the starting compound, and the immobilized complexes were prepared by four different routes which yielded both surface-bonded complexes and complexes bonded within the silicate matrix. These complexes were efficient catalysts of hydrosilylation of octene by triethxysilane. All the immobilized complexes were more than their homogeneous analogues and some could be re-used.     

Ruthenium piano-stool complexes bearing imidazole-based PN ligands

A variety of piano-stool complexes of cyclopentadienyl ruthenium(II) with imidazole-based PN ligands have been synthesized starting from the precursor complexes [CpRu(C₁₀H₈)]PF₆, [CpRu(NCMe)₃]PF₆ and [CpRu(PPh₃)₂Cl]. PN ligands used are imidazol-2-yl, -4-yl and -5-yl phosphines.Depending on the ligand and precursor different types of coordination modes were observed; in the case of polyimidazolyl PN ligands these were κ¹P-monodentate, κ²P,N-, κ²N,N- and κ³N,N,N- chelating and μ-κP:κ²N,N-brigding. The solid-state structures of [CpRu(1a)₂Cl ]·H₂O (5^.H₂O) and [{CpRu(μ-κ²-N,N-κ’¹-P-2b)}₂](C₆H₅PO₃H)₂(C₆H₅PO₃H₂)_2, a hydrolysis product of the as well determined [{CpRu(2b)}₂](PF₆)₂^.2CH₃CN (7b^.2CH₃CN) were determined (1a = imidazol-2-yldiphenyl phosphine, 2b = bis(1-methylimidazol-2-yl)phenyl phosphine, 3a = tris(imidazol-2-yl)phosphine). Furthermore, the complexes [CpRu(L)₂]PF₆ (L = imidazol-2-yl or imidazol-4-yl phosphine) have been screened for their catalytic activity in the hydration of 1-octyne.     

Coordination complexes bearing potentially tetradentate phenoxyamine ligands

A series of metal complexes containing potentially tetradentate phenoxyamine ligands is described. The ligands are found to bind to main-group metals and first-row transition-metal centres with variable denticity depending upon the requirements of the particular metal centre. Bidentate [Al(III)], tridentate [Mg(II), Ca(II), Zn(II)] and tetradentate [K(I), Cr(III), Fe(II), Co(II)] binding modes have been established unambiguously through single-crystal X-ray structure determinations.     

Phosphine-olefin ligands: a facile dehydrogenative route to catalytically active rhodium complexes

Facile, metal-mediated, (acceptorless) dehydrogenation of tricyclopentyl phosphine directly affords rhodium chelating phosphine-olefin complexes, some of which are catalytically active for 1,4-additions.