Phosphasilaallenes >Si = C = P− and phosphagermaallenes >Ge = C = P−

Phosphasilaallene Tip(Ph)Si = C = PMes* (Tip = 2,4,6-triisopropylphenyl, Mes* = 2,4,6-tri-tert-butylphenyl) and phosphagermaallene Mes₂Ge = C = PMes* (Mes = 2,4,6-trimethylphenyl) have been obtained by dehalogenation of their corresponding dihalophosphametallapropenes > E(X)-C(X′) = P? by tert-butyllithium. They dimerize above ?40 °C by a cycloaddition involving two E = C double bonds or the E = C and the P = C double bonds but can be characterized at low temperature by trapping reactions and by low field shifts in ³¹P, ²⁹Si and particularly ¹³C NMR for the sp carbon atom. Owing to a small increase in the steric hindrance, phosphagermaallene Tip(t-Bu)Ge = C = PMes* can be stabilized and isolated. The Ge = C double bond undergoes nearly quantitative [2 + 1] cycloadditions with chalcogens and [2 + 2] cycloadditions with aldehydes or ketones. The surprisingly stable lithiochlorosilane R(Cl₂)Si-C(Li) = PMes* (R = 9-methylfluorenyl) behaves as a synthetic equivalent of the phosphasilaallene R(Cl)Si = C = PMes*. With two alkyl groups (t-Bu) on the germanium atom, the phosphagermaallene t-Bu₂Ge = C = PMes* is not obtained but its formal dimers 1,3-digermacyclobutanes have been isolated.     

Hyperconjugation versus back bonding in AH3−nXn species (A = Si and Ge; X = F,Cl and Br; and n = 1, 2 and 3)

In this research two competing phenomena, back bonding and hyperconjugation, have been investigated based on Natural Bond Orbital (NBO) and Atoms in Molecules (AIM) analyses for radical AH_3?nX_n species, where A = Si and Ge, and n = 1, 2 and 3. It is demonstrated in this article that both above phenomena will be occurred significantly, while back bonding is the only event in analogous compounds with carbon and hyperconjugation is rather negligible. It was also found that only one back bonding with the help of keyword $CHOOSE in NBO analysis can be found in this type of compounds with reasonable structure, while it can be sometimes detected in AH_3?nX_n without using keyword $CHOOSE. It is also shown that there is always an increase in bond length in comparison with reference molecules in mentioned species due to existing hyperconjugation, while if the central atom is carbon, we have always a decrease of bond length due to only having back bonding. Additionally, from AIM point of view, the delocalization indices for α-spin (majority spin) is more than β-spin (minority spin) in radical species for molecules without back bonding, while the situation in our compounds is quite reverse, which can be attributed to the π back bonding in the β-spin electrons.     

Synthesis,characterization and reactions of the transition metal halogenoalkyl carbocation complexes [Cp(CO)2M{η2-CH2CH(CH2)nX}]PF6 (n = 1–8, 10, M = Fe; n = 3, 4 M = Ru; X = Br,I)

The halogenoalkyl complexes [Cp(CO)₂M{(CH₂)_nX}] (n = 3–10, 12, M = Fe; n = 5, 6, M = Ru, X = Br, I) react with Ph₃CPF₆ in dry CH₂Cl₂ to give the corresponding carbocation complexes [Cp(CO)₂M{η²-(CH₂CH(CH₂)_n?2X}]PF₆ in high yields. NMR evidence indicates that the metals form metallacyclopropane type structures with the carbocation ligand. The reactions of some of the cationic complexes with NaI, PPh₃, Na[Cp(CO)₂Fe] and Et₃N are discussed. NaI and Na[Cp(CO)₂Fe] displace the halogeno-olefin, while PPh₃ adds at the β-CH^δ+ giving the unstable phosphonium adducts [Cp(CO)₂Fe{CH₂CH(PPh₃)(CH₂)_n?2X}]PF₆ which decompose to the halogeno-olefins and the cationic PPh₃ complex [Cp(CO)₂Fe(PPh₃)]⁺. Et₃N causes allylic deprotonation forming internal olefin complexes of the type [Cp(CO)₂Fe{CH₂CHCH(CH₂)_n?3X}]PF₆.     

Synthesis,characterization and thermochemistry of Cs(ASP) · nH2O (n = 0, 1)

New compounds of aspartic acid Cs(ASP) · nH₂O (n = 0, 1) have been synthesized and characterized by XRD, IR and Raman spectroscopy as well as TG. The structural formula of this new compound was Cs(ASP) · nH₂O (n = 0, 1). The enthalpy of solution of Cs(ASP) · nH₂O (n = 0, 1) in water were determined. With the incorporation of the standard molar enthalpies of formation of CsOH(aq) and ASP(s), the standard molar enthalpy of formation of −(1202.9 ± 0.2) kJ · mol⁻¹ of Cs(ASP) and −(1490.7 ± 0.2) kJ · mol⁻¹ of Cs(ASP) · H₂O were obtained.     

Thermodynamic properties of tetraphenylphosphonium perchlorate and tetraphenylarsonium perchlorate fromT → 0 toT = 340 K

The temperature dependence of the standard molar heat capacity C_{p, m}^oof samples of crystalline tetraphenylphosphonium perchlorate and tetraphenylarsonium perchlorate was measured in an adiabatic low-pressure calorimeter between T =  4.8 K and T =  340 K and from T =  5.8 K to T =  340 K, respectively, mostly to within a precision of 0.2 per cent. For tetraphenylphosphonium perchlorate, an anomalous change of the heat capacity in the range T =  125 K to T =  185 K, probably arising from the excitation of hindered rotations of atomic groups, was found and its thermodynamic characteristics were determined. No such anomaly was observed for tetraphenylarsonium perchlorate. The data obtained were used to calculate the thermodynamic functions C_{p, m}^o(T) / R, Δ₀^TH_m^o / R·K, Δ₀^TS_m^o / R, and Φ_m^o = Δ₀^TS_m^o − Δ₀^TH_m^o / T(where R is the universal gas constant) of the compounds between T →  0 and T =  340 K.     

Studying (n, 0) and (m,m) GaP nanotubes (n = 3–10 and m = 2–6) through DFT calculations of Ga-69 quadrupole coupling constants

We investigated properties of representative zigzag and armchair gallium phosphide (GaP) nanotubes by performing density functional theory (DFT) calculations. To achieve our purpose, eight models of (n,0) zigzag GaP nanotubes with n = 3–10 and five models of (m,m) armchair GaP nanotubes m = 2–6 were considered. Each model was firstly optimized and quadrupole coupling constants (C_Q) were subsequently calculated for gallium-69 atoms of the optimized structures. The results indicated that the optimized properties including dipole moments, energy gaps, binding energies, and bond lengths could be mainly dependent on the diameters of GaP nanotubes, which are directly determined by n or m indices. Moreover, comparing the values of C_Q parameters indicated that the narrower GaP nanotubes could be considered as more reactive materials than the wider nanotubes, in which the reactivities are very important in determining the applications of nanotubes. And finally, the atoms at the sidewalls of nanotubes could be divided into atomic layers based on the similarities of properties for atoms of each layer, in which the properties of Ga atoms at the edges of nanotubes are significantly different from other layers only for wider nanotubes.     

Thermodynamic study of (alkyl esters + α,ω-alkyl dihalides) III. HmEandVmE for 20 binary mixtures {xCu − 1H2u − 1CO2C4H9 + (1 − x)α,ω-ClCH2(CH2)v − 2CH2Cl}, where u = 1 to 4, α = 1 and v = ω = 2 to 6

In this article, the experimental data of excess molar enthalpies $H_{\mathrm{m}}^{\mathrm{E}}$ and excess molar volumes $V_{\mathrm{m}}^{\mathrm{E}}$ are presented for a set of 20 binary mixtures comprised of the first four butyl alkanoates (methanoate to butanoate) and five α,ω-dichloroalkanes (1,2-dichloroethane to 1,6-dichlorohexane), obtained at atmospheric pressure and at a temperature of 298.15 K. The results indicate the existence of specific interactions between both kinds of compounds resulting in exothermic processes for most mixtures, except for those containing butyl methanoate which give rise to net endo/exothermic effects. The $V_{\mathrm{m}}^{\mathrm{E}}$ are positive for mixtures of (butyl esters + 1,2-dichloroethane or 1,3-dichloropropane) and negative for the remaining ones. The change in $H_{\mathrm{m}}^{\mathrm{E}}$ with the dichloroethane chain length for a same ester is regular although the $V_{\mathrm{m}}^{\mathrm{E}}$ presents an irregular variation. It can, therefore, be deuced from this that the mixing process involves both effects, exothermic/endothermic and expansion/contraction, simultaneously. The behaviour of the mixtures is interpreted on the basis of the results observed and attributed to different effects taking place among the molecules studied.To improve application of the UNIFAC model using the version of Dang and Tassios, average values were recalculated again for parameters of the ester/chloride interaction, distinguishing, during its application, the functional group of the acid part of the ester. In spite of this, the model does not adequately reproduce the systems’ behaviour.     

Viscosity of {xCO2 + (1 − x)CH4} with x = 0.5174 for temperatures between (229 and 348) K and pressures between (1 and 32) MPa

A vibrating wire instrument, in which the wire was clamped at both ends, was used to measure the viscosity of {xCO₂ + (1 − x)CH₄} with x = 0.5174 with a combined uncertainty of 0.24 μPa · s (a relative uncertainty of about 0.8 %) at temperatures T between (229 and 348) K and pressures p from (1 to 32) MPa. The corresponding mass density ρ, estimated with the GERG-2008 equation of state, varied from (20 to 600) kg · m⁻³. The measured viscosities were consistent within combined uncertainties with data obtained previously for this system using entirely different experimental techniques. The new data were compared with three corresponding states-type models frequently used for predicting mixture viscosities: the Extended Corresponding States (ECS) model implemented in REFPROP 9.1; the SUPERTRAPP model implemented in MultiFlash 4.4; and a corresponding states model derived from molecular dynamics simulations of Lennard Jones fluids. The measured viscosities deviated systematically from the predictions of both the ECS and SUPERTRAPP models with a maximum relative deviations of 11 % at (229 K, 600 kg · m⁻³) and −16 % at (258 K, 470 kg · m⁻³), respectively. In contrast, the molecular dynamics based corresponding states model, which is predictive for mixtures in that it does not contain any binary interaction parameters, reproduced the density and temperature dependence of the measured viscosities well, with relative deviations of less than 4.2 %.     

Separation of toluene and heptane by liquid–liquid extraction using z-methyl-N-butylpyridinium tetrafluoroborate isomers (z = 2, 3, or 4) at T = 313.2 K

The (liquid + liquid) equilibrium (LLE) data for three ternary systems containing heptane, toluene, and a z-methyl-N-butylpyridinium tetrafluoroborate ionic liquid ([zbmpy][BF₄] IL, where z = 2, 3, or 4) were determined at T = 313.2 K and atmospheric pressure. The effect of IL cation isomers on the LLE data was evaluated for the first time. The selectivity and extractive capacity from these LLE data were calculated and compared to those previously reported in the literature for the systems (heptane + toluene + [4bmpy][BF₄]) and (heptane + toluene + sulfolane). The results show that the LLE data for the systems comprising the ILs with the metha- and para-substituted cations do not differ significantly from isomer to isomer. On the other hand, significant differences were observed among the systems with the ortho-substituted cation and the other two cation isomers. The degree of consistency of the experimental LLE data was ascertained by applying the Othmer–Tobias correlation. In addition, the LLE data were satisfactorily correlated by means of the thermodynamic NRTL model.     

(Solid + liquid) equilibria for the ternary system (CsBr + LnBr3 + H2O) (Ln = Pr,Nd, Sm) at T = 298.2 K and atmospheric pressure,thermal and fluorescent properties of Cs2LnBr5·10H2O

The (solid + liquid) phase equilibria of the ternary systems (CsBr + LnBr₃ + H₂O) (Ln = Pr, Nd, Sm) at T = 298.2 K were studied by the isothermal solubility method. The solid phases formed in the systems were determined by the Schreinemakers wet residues technique, and the corresponding phase diagrams were constructed based on the measured data. Each of the phase diagrams, with two invariant points, three univariant curves, and three crystallization regions corresponding to CsBr, Cs₂LnBr₅·10H₂O and LnBr₃·nH₂O (n = 6, 7), respectively, belongs to the same category. The new solid phase compounds Cs₂LnBr₅·10H₂O are incongruently soluble in water, and they were characterized by chemical analysis, XRD and TG-DTG techniques. The standard molar enthalpies of solution of Cs₂PrBr₅·10H₂O, Cs₂NdBr₅·10H₂O and Cs₂SmBr₅·10H₂O in water were measured to be (52.49 ± 0.48) kJ · mol⁻¹, (49.64 ± 0.49) kJ · mol⁻¹ and (50.17 ± 0.48) kJ · mol⁻¹ by microcalorimetry under the condition of infinite dilution, respectively, and their standard molar enthalpies of formation were determined as being −(4739.7 ± 1.4) kJ · mol⁻¹, −(4728.4 ± 1.4) kJ · mol⁻¹ and −(4724.4 ± 1.4) kJ · mol⁻¹, respectively. The fluorescence excitation and emission spectra of Cs₂PrBr₅·10H₂O, Cs₂NdBr₅·10H₂O and Cs₂SmBr₅·10H₂O were measured. The results show that the upconversion spectra of the three new solid phase compounds all exhibit a peak at 524 nm when excited at 785 nm.     

The structural and thermal stability,electrochemical hydrogenation and corrosion behavior of LaT5−xMx(T = Co,Ni and M = Al,Ge, Li) phases

The structural and thermal stability, electrochemical hydrogenation and corrosion behavior of LaT_5−x(M/Li)_x (T = Co, Ni and M = Al, Ge) alloys have been investigated using x-ray diffraction, SEM with WDS/EDX, DSC and electrochemical techniques. The prepared ternary and quaternary samples are solid solutions on the base of binary LaCo₅ and LaNi₅ compounds with hexagonal CaCu₅ structure type. By partial substitution of transition metals (Ni and Co) by Al, Ge and Li in the LaT_5−x(M/Li)_x alloys the discharge capacity increased by 25%. Doping of LaCo₅ and LaNi₅ binary phases by Al, Ge and Li improves corrosion resistance, thermal stability and absorption capacity during the electrochemical hydrogenation. These alloys passivate effectively in strong alkaline solution.     

Interactions in (l-phenylalanine/l-histidine + 0.01 mol · kg−1 aqueous β-cyclodextrin) systems at T = (293.15, 298.15, 303.15 and 308.15) K

Densities (ρ) and speeds of sound (u) have been measured for (l-phenylalanine + 0.01 mol · kg⁻¹ aqueous β-cyclodextrin) and (l-histidine + 0.01 mol · kg⁻¹ aqueous β-cyclodextrin) systems at T = (293.15, 298.15, 303.15 and 308.15) K using the density and sound velocity Meter DSA 5000 M. The ρ and u values have been utilized to evaluate values of the partial molar volume (${\varphi }_v^{\circ }$), transfer partial molar volume (${\mathrm{\Delta }}_{\text{tr}}{\varphi }_v^{\circ }$), partial molar isentropic compressibility (${\varphi }_k^{\circ }$), and transfer partial molar isentropic compressibility (${\mathrm{\Delta }}_{\text{tr}}{\varphi }_k^{\circ }$) of the systems studied. The experimentally measured and calculated parameters have been interpreted in terms of host-guest and ion-hydrophilic interactions operative in the systems.