Mononuclear and one-dimensional manganese(II) complexes constructed by dithioethers: Effect of flexibility and positional isomerism

Interactions of dithioether ligands L², L⁴ and L⁵ (L² = 1,3-bis(4-(3-pyridyl) pyrimidin-2-ylthio) propane; L⁴ = 1,3-bis[4-(3-pyridyl) pyrimidinyl thiomethyl]benzene; L⁵ = 1,4-bis[4-(3-pyridyl)pyrimidinylthiomethyl] benzene) with Mn(II) ions and NH₄SCN in an analogous way led to the formation of two discrete mononuclear complexes and a one-dimensional chain, respectively, which may be attributed to the different flexibility and positional isomerism of the ligands.     

Studies on some ternary complexes of copper(II) involving an amino penicillin drug

Multiple equilibrium studies by pH-metric measurements in the ternary copper(II) complexes with ampicillin(amp) as ligand A and glycine(gly), dl-2-aminobutanoic acid(2aba), dl-3-aminobutanoic acid(3aba), 1,2-diaminopropane(dp), 1,3-diaminopropane(tp), dl-2,3-diaminopropanoic acid(dapa), dl-2,4-diaminobutanoic acid(daba) & dl-2,5-diaminopentanoic acid(ornithine)(orn) as ligands B show the presence of CuABH, CuAB or CuAH?1 B ternary complex species. In the CuAB species the binding of the ligands A and B is similar to their binding in their respective binary complexes. In CuABH_?1 species the deprotonation occurs with amp(A) ligand. The Δlog K values indicate higher stabilities for the ternary complexes than the binary species. The CuAB species with B = gly, 2aba, dapa & orn have been isolated and characterized. The conductivity measurements indicate that the complexes are non-electrolytes. Magnetic susceptibility and electronic spectral data suggest a square pyramidal geometry for CuAB with B = gly/2aba complexes and distorted octahedral geometry for CuAB with B = dapa/orn. The vibrational spectra are interpreted to find the mode of binding of ligand to metal. The TG/DTA studies reveal that the complexes decompose in three steps, indicating non-involvement of hydrated or coordinated water molecules in the complex. The cyclic voltammograms indicate a quasi reversible Cu²⁺/Cu⁺ couple. The antimicrobial activity and CT-DNA cleavage ability of the complexes show higher activity for ternary complexes.     

Synthesis and properties of [Pt(4-CO2CH3-py)2(dmit)] and [Pt(4-NO2-py)2(mnt)]: Exploring tunable Pt dyes

Two [Pt(II)(substituted-pyridyl)₂(dithiolate)] dyes with the formulas [Pt(4-CO₂CH₃-py)₂(dmit)] and [Pt(4-NO₂-py)₂(mnt)] (where py = pyridyl, dmit = 1,3-dithiol-2-thione-4,5-dithiolate and mnt = maleonitriledithiolate) and their dichloride precursors [PtCl₂(4-R-py)₂] have been synthesized and compared to a previously-reported dye [Pt(4-CO₂CH₃-py)₂(mnt)]. Variation of either the pyridyl ligands or the ditholate ligand showed tuning of the electrochemical and spectroscopic characteristics of the dyes as evidenced by cyclic and differential pulse voltammetry, hybrid DFT calculations, UV/Vis spectroelectrochemistry and in situ EPR spectroelectrochemistry. The HOMO was shown to be mostly dithiolate based and the LUMO pyridyl based allowing absorption characteristics to be predictably tuned to longer wavelengths, which is important for optimization of such dyes in applications such as solar energy conversion.     

Palladium(II) complex taken as a model of an antitumour agent: Synthesis and equilibrium investigation involving biologically relevant ligands

Pd(DHP)Cl₂ and Pd(DHP)(CBDCA) complexes (DHP = 1,3-diamino-2-hydroxopropane and CBDCA = 1,1-cyclobutanedicarboxylate), were synthesized and characterized by elemental analysis, IR and NMR spectral measurements. The coordination of [Pd(DHP)(H₂O)₂]²⁺ with some selected bio-relevant ligands, containing different functional groups was investigated. The ligands used are amino acids, peptides, DNA constituents and dicarboxylic acids. Stoichiometry and stability constants of the complexes formed are reported at 25 °C and 0.1 M ionic strength. The results show the formation of 1:1 complexes with amino acids and dicarboxylic acids. DNA constituents form 1:1 and 1:2 complexes. Peptides form both 1:1 complexes and the corresponding deprotonated amide species. The effect of chloride ion concentration and dioxane on the acid dissociation constants of 1,1-cyclobutane dicarboxylic acid (CBDCAH₂) and the formation constant of its complex with Pd(DHP)²⁺ was reported. The equilibrium constants for the displacement of coordinated ligands as uracil, glycine or methionine by cysteine are calculated. The results are expected to contribute to the chemistry of antitumour agents.     

Hydrocarbon (π- and σ-) complexes of nickel,palladium and platinum: Synthesis,reactivity and applications

With the exception of metallocenes, transition metal complexes with hydrocarbon ligands only are rare. However, complexes of this type containing Group 10 metals are known and have been shown to be quite stable. These complexes are versatile precursors for many organometallic compounds. In addition, such compounds can play an important role in many reactions including C–H or C–C activation reactions and have useful applications in the thermal and photochemical production of metal films by chemical vapour deposition (CVD). The present review summarizes the synthesis, properties and chemistry of hydrocarbon complexes of Group 10 metals of the type L_nM or L_nMR₁R₂ (where L_n = σ- or π-hydrocarbon ligands; M = Ni, Pd and Pt; R₁, R₂ = σ-hydrocarbon ligands) without the involvement of any hetero donor ligands such as N, P, O and S in the metal coordination spheres.     

Trinuclear molybdenum cluster sulfides coordinated to dithiolene ligands and their use in the development of molecular conductors

The present article reviews synthetic approaches to efficiently prepare Mo₃S₇ clusters coordinated to 1,2-bis-dithiolene ligands of general formula [Mo₃S₇(dithiolene)₃]^2? where dithiolene stands for tfd (bis(trifluoromethyl)-1,2-dithiolene), bdt (1,2-benzenedithiolene), mnt (maleonitriledithiolene), tdas (1,2,5-thiadiazole-3,4-dithiolene), dmid (1,3-dithia-2-one-4,5-dithiolene), dmit (1,3-dithia-2-thione-4,5-dithiolene) and the diselenolene dsit (1,3-dithia-2-thione-4,5-diselenolene). These [Mo₃S₇(dithiolene)₃]^2? dianions serve as starting materials to access new dithiolene clusters featuring Mo₃S₄ and Mo₂O₂S₂ cluster cores. The electrochemical and spectroscopic properties as well as solid state structures of Mo₃S₇/dithiolene compounds are also described. These C₃-symmetry [Mo₃S₇(dithiolene)₃]^2? molecules inherently possess degenerate frontier orbitals and display a rich structural diversity due to the electrophilic character of the three sulfur atoms in axial positions. These characteristics make the [Mo₃S₇(dithiolene)₃]^2? dianions, versatile targets for the development of new molecular conductors. Several examples of hybrid charge-transfer salts based on TTF-donors and [Mo₃S₇(dithiolene)₃]^2?/[Mo₃S₇X₆]^2? dianions (X = Cl, Br) are discussed as well as the preparation of the first family of cluster-based single-component magnetic conductors of formula Mo₃S₇(dithiolene)₃.     

Bonding aspects of P-heterocyclic carbene transition metal complexes. A computational assessment

Gradient-corrected (BP86) density-functional calculations were used to study the chemical bond between transition-metal complexes and N- and P-heterocyclic carbenes EHC (EHC = imidazolin-2-ylidene; 1,3-dimethylimidazolin-2-ylidene; 1,3-dihydro-1,3-diphosphol-2-ylidene; 1,3-dimethyl-1,3-diphosphol-2-ylidene). Forty two complexes of the type [M] ← EHC, [M] = CuCl, AgCl, AuCl, BeCl⁺, Cu⁺, Ag⁺, Au⁺, have been studied. Both electrostatic contributions as well as π-back-donation are of special importance for the [M] ← EHC bond. The metal–ligand bond strengths are comparable for NHC and PHC complexes. Whereas the former undergo stronger electrostatic interactions, the latter show a higher degree of π-bonding. When considering NHC and PHC as ligands for transition-metal-based catalysts, the results of the present study suggest that PHC both compete with NHC – in terms of metal-to-ligand bond strength – as well as complement NHC – in terms of the nature of the metal–ligand bond.     

Synthesis and in vitro biology of Co(II), Ni(II), Cu(II) and Zinc(II) complexes of functionalized beta-diketone bearing energy buried potential antibacterial and antiviral O,O pharmacophore sites

The clinically active functionalized β-diketones 1-(2′,4′-dihydroxyphenyl)-3-(2″-substitutedphenyl)-propane-1,3-dione (L₁)–(L₂) have been synthesized from Baker–Venkataraman transformation of 2,4-diaroyloxyacetophenones. Their transition metal complexes (1)–(8) have been prepared and characterized by physical, spectral and analytical data. The functionalized beta-diketone potentially acts as bidentate ligand and co-ordinate with the transition metal atom through beta-diketo system. The complexes have general formula [ML₂] where M = Co(II), Ni(II), Cu(II), Zinc(II) and L = ligand. The 1-(2′,4′-dihydroxyphenyl)-3-(2″-substitutedphenyl)-propane-1,3-dione and their transition metal complexes have been screened for in vitro antibacterial, antifungal and antioxidant bioassay. The biological activity data show that the transition metal complexes are more potent antibacterial, antifungal and antioxidant agents than the parent functionalized beta-diketone against different bacterial and fungal species. This constitutes a new group of compounds that can be used as potential metal derived drugs. Ultimately, here we can prompt about the use of metals for the drugs. The metal complexes were also studied for their thermogravimetric analyses.     

Studies on Cu(II) ternary complexes involving an aminopenicillin drug and imidazole containing ligands

Equilibrium studies on the ternary complex systems involving ampicillin (amp) as ligand (A) and imidazole containing ligands viz., imidazole (Him), benzimidazole (Hbim), histamine (Hist) and histidine (His) as ligands (B) at 37 °C and I = 0.15 mol dm^?3 (NaClO₄) show the presence of CuABH, CuAB and CuAB₂. The proton in the CuABH species is attached to ligand A. In the ternary complexes the ligand, amp(A) binds the metal ion via amino nitrogen and carbonyl oxygen atom. The CuAB (B = Hist/His)/CuAB₂ (B = Him/Hbim) species have also been isolated and the analytical data confirmed its formation. Non-electrolytic behavior and monomeric type of chelates have been assessed from their low conductance and magnetic susceptibility values. The electronic and vibrational spectral results were interpreted to find the mode of binding of ligands to metal and geometry of the complexes. This is also supported by the g tensor values calculated from ESR spectra. The thermal behaviour of complexes were studied by TGA/DTA. The redox behavior of the complexes has been studied by cyclic voltammetry. The antimicrobial activity and CT DNA cleavage study of the complexes show higher activity for ternary complexes.     

Structural and spectroscopic properties of Ru(II) complexes of 4-(aryl)thiosemicarbazones of thiophen-2-carbaldehyde

Six Ru(II) complexes of formula [Ru(L)₂(PPh₃)₂] have been prepared where LH = 4-(aryl)thiosemicarbazones of thiophen-2-carbaldehyde. X-ray crystal structures of five of the complexes are reported. In all the complexes ruthenium is six coordinate with a distorted octahedral cis-P₂, cis-N₂, trans-S₂ donor environment, and each of the two thiosemicarbazone ligands are coordinated in a bidentate fashion forming a four membered chelate ring. The complexes undergo a one-electron oxidation at ～0.5 V vs. Ag/AgCl. The EPR spectrum of the electrochemically oxidized solution at 100 K shows a rhombic signal, with transitions at g₁ = 2.27, g₂ = 2.00 and g₃ = 1.80. DFT calculations on one of the complexes suggest that there is 35% ruthenium and 17% sulfur orbital contribution to the HOMO. These results suggest that the assignment of metal atom oxidation states in these compounds is not unambiguous.     

First examples of dipyrido[1,2-c:2′,1′-e]imidazolin-7-ylidenes serving as NHC-ligands: Synthesis,properties and structural features of their chromium and tungsten pentacarbonyl complexes

The first use of dipyridocarbenes as Arduengo–Wanzlick type carbene ligands for transition metal complexes is reported. The complexes M(CO)₅L (L = dipyridoimidazolinylidene, di-tert-butyldipyridoimidazolinylidene, M = Cr, W) were synthesized and their spectroscopic and structural properties compared with the literature known N-heterocyclic carbene (NHC) group 6 metal pentacarbonyl complexes. This reveals that the ¹³C NMR carbene signals of theses complexes with dipyrido carbene ligands show the strongest high-field shift ever observed for M(CO)₅(NHC) (M = Cr, W) complexes. The structural characterization shows alternating single and double bonds in the conjugated dipyrido moiety of the ligand.     

Preparation and thermal properties of lanthanide complexes with 2,3-dichlorobenzoic acid and 1,10-phenanthroline

Three lanthanide complexes with a general formula [Ln(2,3-DClBA)₃phen]₂ (Ln(III) = Eu(1), Tb(2), Ho(3); 2,3-DClBA = 2,3-dichlorobenzoate; phen = 1,10-phenanthroline) were synthesized and characterized by elemental analysis, molar conductance, infrared and ultraviolet spectra and powder X-ray diffraction (XRD). The luminescent properties of the complexes 1 and 2 were studied. The thermal behaviors of the complexes were also discussed by thermogravimetric (TG), differential thermogravimetric (DTG) and infrared spectra (IR) techniques. The heat capacities of the complexes were measured from 259.15 to 493.02 K by means of Differential scanning calorimeter (DSC). The dependence of heat capacity on the reduce temperature x (x = [T ? (T_max + T_min)/2]/[(T_max ? T_min)/2]) was fitted to a polynomial equation with the least squares method for each complex. Furthermore, based on the fitted polynomial, the smoothed heat capacities and the derived thermodynamic functions (H_T ? H_298.15 K), (S_T ? S_298.15 K) and (G_T ? G_298.15 K) in the measured temperature range were obtained with an interval of 10 K.     

Palladium and platinum complexes with planar chiral 1,2-disubstituted ferrocenes containing phosphine and thioether donor groups

Three palladium(II) complexes and four platinum(II) complexes having general formula CpFe{1,2-C₅H₃(PPh₂)(CH₂SR)}MCl₂ (M = Pd, R = Ph, Et and tBu; M = Pt, R = Ph, Et, tBu and Cy) have been synthesized by reaction of the corresponding CpFe{1,2-C₅H₃(PPh₂)(CH₂SR)} ligands with PdCl₂(CH₃CN)₂ or PtCl₂(CH₃CN)₂. These complexes have been fully characterized in solution and in solid state. In all cases, monomeric square planar complexes were obtained as pure diastereoisomers.     

Mononuclear ruthenium(III) complexes containing chelating thiosemicarbazones: Synthesis,characterization and catalytic property

Mononuclear ruthenium(III) complexes of the type [RuX(EPh₃)₂(L)] (E = P or As; X = Cl or Br; L = dibasic terdentate dehydroacetic acid thiosemicarbazones) have been synthesized from the reaction of thiosemicarbazone ligands with ruthenium(III) precursors, [RuX₃(EPh₃)₃] (where E = P, X = Cl; E = As, X = Cl or Br) and [RuBr₃(PPh₃)₂(CH₃OH)] in benzene. The compositions of the complexes have been established by elemental analysis, magnetic susceptibility measurement, FT-IR, UV–vis and EPR spectral data. These complexes are paramagnetic and show intense d–d and charge transfer transitions in dichloromethane. The complexes show rhombic EPR spectra at LNT which are typical of low-spin distorted octahedral ruthenium(III) species. All the complexes are redox active and display an irreversible metal centered redox processes. Complex [RuCl(PPh₃)₂(DHA–PTSC)] (5) was used as catalyst for transfer hydrogenation of ketones in the presence of isopropanol/KOH and was found to be the active species.     

The effect of bridgehead steric bulk on the ground state and intramolecular exchange processes of (μ-SCH2CR2CH2S)[Fe(CO)3][Fe(CO)2L] complexes

The flexibility of the coordination sphere in the diiron organometallic is likely an important design component in nature's electrocatalyst for proton reduction or H₂ oxidation, i.e, the active site of [FeFe]hydrogenase. A series of complexes, (μ-SCH₂CRR′CH₂S)[Fe(CO)₃][Fe(CO)₂L] with steric bulk incorporated into the μ-S-to-S linker was synthesized and the compounds were analyzed by infrared spectroscopy and cyclic voltammetry [(R/R′ = Me/Me, Et/Et, Bu/Et), (L = CO, PPh₃, IMes (1,3-bis(2,4,6-trimethylphenyl)-imidazol-2-ylidene), and IMe (1,3-dimethylimidazole-2-ylidene))]. While added steric bulk at the bridgehead carbon of the μ-SCH₂CR₂CH₂S produced little change in the ground state structures (X-ray diffraction) and electronic character for the (μ-SRS)[Fe(CO)₃]₂ complexes, monosubstitution of a CO with L produced distortions consistent with steric interference of the μ-SRS with nearby ligands as compared to the similar (μ-pdt)[Fe(CO)₃][Fe(CO)₂L] (pdt = S(CH₂)₃S). Variable temperature NMR studies have shown that the activation barrier for CO site exchange on the sterically bulky complexes decreases in a manner predicted by theory [J.W. Tye, M.B. Hall, M.Y. Darensbourg, Inorg. Chem. 45 (2006) 1552].     

Spin-crossover in dimeric hydrogen-bonded iron(II) 2-(pyrazolyl)-pyridine and 2-(imidazolyl)-pyridine complexes

Five new hydrogen-bonded solvated iron(II) complexes of pyrazolyl- and imidazolyl-based N,N-chelating ligands have been synthesised. Water to ligand-NH hydrogen-bonded bridges occur in the pseudo-dimeric complexes {cis-[Fe(pypzH)₂(NCX)₂]₂(μ-OH₂)(H₂O)₂} · H₂O · MeOH (where X = S or Se), and in the chain complex {cis-[Fe(pypzH)₂(NCS)₂](μ-OH₂)}_n. A “half” spin-crossover (T_c = 125 K) was observed in the dimeric X = Se complex by means of magnetic measurements and no thermal hysteresis occurred between 4 and 300 K. The crystal structure at 123 K showed Fe–N distances consistent with the magnetism. Each Fe in the dimeric unit was structurally equivalent in the HS–LS state. Removal of the solvate molecules led to HS–HS behaviour over the temperature range 4–300 K. The pseudo-dimer with X = S also showed HS–HS behaviour as did the monomeric analogue cis-[Fe(pypzH)₂(NCS)₂]H₂O and a structurally different methanol-bridged dimer {cis-[Fe(pyimH)₂(NCS)₂]₂(μ-MeOH)₂} · 2MeOH (pypzH = 2-(1H-pyrazol-3-yl)-pyridine; pyimH = 2-(1H-imidazol-2-yl)-pyridine).     

Synthesis and catalytic properties of cationic palladium(II) and rhodium(I) complexes bearing diphosphinidinecyclobutene ligands

Cationic palladium(II) and rhodium(I) complexes bearing 1,2-diaryl-3,4-bis[(2,4,6-tri-t-butylphenyl)phosphinidene]cyclobutene ligands (DPCB–Y) were prepared and their structures and catalytic activity were examined (aryl = phenyl (DPCB), 4-methoxyphenyl (DPCB–OMe), 4-(trifluoromethyl)phenyl (DPCB–CF₃)). The palladium complexes [Pd(MeCN)₂(DPCB–Y)]X₂ (X = OTf, BF₄, BAr₄ (Ar = 3,5-bis(trifluoromethyl)phenyl)) were prepared by the reactions of DPCB–Y with [Pd(MeCN)₄]X₂, which were generated from Pd(OAc)₂ and HX in MeCN. On the other hand, the rhodium complexes [Rh(MeCN)₂(DPCB–Y)]OTf were prepared by the treatment of [Rh(μ-Cl)(cyclooctene)₂]₂ with DPCB–Y in CH₂Cl₂, followed by treatment with AgOTf in the presence of MeCN. The cationic complexes catalyzed conjugate addition of benzyl carbamate to α,β-unsaturated ketones.     

Heterometallic 3d–4f coordination polymers: Synthesis,characterization and magnetic properties of 1D zigzag chains containing samarium and terbium

Reaction of the copper precursor [Cu(MeOsaltn)(H₂O)] (H₂MeOsaltn = N,N′-bis(3-methoxysalicylidene)-1,3-diaminopropane) with Ln(NO₃)₃·6H₂O (Ln = Sm and Tb) and pyrazine-2,3-dicarboxylic acid (H₂pyrdic) results in the formation of 1D zigzag chains with the general formula of [Cu(MeOsaltn)Ln(NO₃)(pyrdic)]_n·nDMF. X-ray crystal structures reveal that the samarium and terbium compounds are isostructural and crystalize in the orthorhombic space group Pbcn. The chains are composed of heterodinuclear copper–lanthanide building blocks which are linked by the pyrazine-2,3-dicarboxylate bridging units. Temperature-dependent susceptibility measurements indicate antiferromagnetic exchange interactions for the samarium–copper chain whereas for the terbium–copper compound ferromagnetic interactions are observed.     

The reaction of amidinato(pyridine) complexes of molybdenum and tungsten with triethylborane adduct of N-heterocyclic carbene (NHC · BEt3): Investigation on the reactivity of NHC · BEt3 as carbene precursor toward transition metal complexes

The reaction of triethylborane adduct of N-heterocyclic carbene, NHC · BEt₃, (NHC = IⁱPr = 1,3-diisopropylimidazol-2-ylidene (IⁱPr · BEt₃; 1a), NHC = IMes = 1,3-dimesitylimidazol-2-ylidene (IMes · BEt₃; 1b)), which was prepared by the reaction of the corresponding imidazolium salt with one equivalent of LiBEt₃H, with amidinato(pyridine) complex, [M(η³-allyl){η²-(NPh)₂CH}(CO)₂(NC₅H₅)] (M = Mo; 2-Mo M = W; 2-W), was investigated. The reaction of compound 1 with complex 2 under toluene-reflux conditions resulted in the formation of carbene complex [M(η³-allyl){η²-(NPh)₂CH}(CO)₂(NHC)] (M = Mo, NHC = IⁱPr; 3a-Mo, M = Mo, NHC = IMes; 3b-Mo, M = W, NHC = IⁱPr; 3a-W, M = W, NHC = IMes; 3b-W). These complexes were characterized spectroscopically as well as by X-ray analyses. Complex 3a-Mo was formed in various solvents such as 1,2-dimethoxyethane (DME), 1,2-dichloroethane, and acetonitrile under refluxing conditions for 3 h. In toluene, 3a-Mo was obtained in a good yield by heating at 70 °C for only 20 min. Employment of NHC · BEt₃ (1) was found to afford convenient route for the introduction of the carbene ligand to the transition metal complexes.     

Strategies towards the purposeful design of long-range ferromagnetic ordering due to spin canting

The magnetic properties of three octahedral iron(II) complexes with Schiff-base like equatorial N₂O₂ coordinating ligands and methanol (MeOH) or 4,4′-bipyridyl (bipy) as axial ligands are reported. The methanol adduct 1(MeOH) ([FeL1(MeOH)](MeOH); with L1 = [3,3′]-[3,4-pyridinebis(iminomethylidyne)bis(2,4-pentanedionato)(2-)-N,N′,O²,O²′] shows a strong spontaneous magnetization at low temperatures. The complexes 2(MeOH)_0.5 ([FeL1(bipy)](MeOH)_0.5) and 3(MeOH) ([FeL2(MeOH)₂](MeOH); with L2 = [3,3′]-[1,2-phenylenebis(iminomethylidyne)bis(2,4-dioxo-4-phenylbutane)(2-)-N,N′,O²,O²′] show no indication for some long-range magnetic ordering. Results from X-ray structure analysis of all three complexes indicate that the strong spontaneous magnetization of 1(MeOH) is due to spin canting with a canting angle near 90°.