Antimonene, an emerging two‐dimensional material, has garnered tremendous interest due to its intriguing structure and fascinating electronic properties. However, the synthesis of high‐quality few‐layer antimonene nanosheets, which can only be produced by exfoliation or epitaxial growth on exotic substrates, has greatly hindered the development of this new field. Herein, few‐layer hexagonal and functionalized antimonene nanosheets were successfully prepared from SbCl3 solutions for the first time by exclusively promoting their anisotropic growth in a colloidal solution. Oleylamine was selected as the reducing agent, rather than oleic acid, and dodecylthiol was key to preventing the formation of antimony oxide. Additionally, halide ions adsorbed on the surface also influenced the anisotropic growth of hexagonal antimonene nanosheets. Atomic force microscopy (AFM) revealed that the sheets were ≈5 nm thick; Raman spectroscopy and X‐ray diffraction (XRD) revealed a rhombohedral atomic structure (β‐Sb) with excellent stability. 相似文献
A method for the region‐selective deposition of nanoparticles (NPs) by the Huisgen 1,3‐dipolar cycloaddition is presented. The approach enables defined stacking of various oxide NPs in any order with control over layer thickness. Thereby the reaction is performed between a substrate, functionalized with a self‐assembled monolayer of an azide‐bearing phosphonic acid (PA) and aluminum oxide (AlOx) NPs functionalized with an alkyne bearing PA. The layer of alkyne functionalized AlOx NPs is then used as substrate for the deposition of azide‐functionalized indium tin oxide (ITO) NPs to provide a binary stack. This progression is then conducted with alkyne‐functionalized CeO2 NPs, yielding a ternary stack of NPs with three different NP cores. The stacks are characterized by AFM and SEM, defining the region‐selectivity of the deposition technique. Finally, these assemblies have been tested in devices as a dielectric to form a capacitor resulting in a dramatic increase in the measured capacitance. 相似文献
The synthesis of upconverting hydrogel nanocomposites by base‐catalyzed thiol‐ene click reaction between 10‐undecenoic acid capped Yb3+/Er3+‐doped NaYF4 nanoparticles and pentaerythritol tetrakis(3‐mercaptopropionate) (PETMP) as tetrathiol monomer is reported. This synthetic strategy for nanocomposite gels is quite different from works where usually the preformed gels are mixed with the nanoparticles. Developing nanocomposites by surface modification of capping ligands would allow tuning and controlling of the separation of the nanoparticles inside the gel network. The hydrogel nanocomposites prepared by thiol‐ene click reaction show strong enhancement in luminescence intensity compared to 10‐undecenoic acid‐capped Yb3+/Er3+‐doped NaYF4 nanoparticles through the upconversion process (under 980 nm laser excitation). The hydrogel nanocomposites display strong swelling characteristics in water resulting in porous structures. Interestingly, the resulting nanocomposite gels act as templates for the synthesis of dendrimer‐like Au nanostructures when HAuCl4 is reduced in the presence of the nanocomposite gels. 相似文献
Herein, we introduce a facile, user‐ and environmentally friendly (n‐octanol‐induced) oleic acid (OA)/ionic liquid (IL) two‐phase system for the phase‐ and size‐controllable synthesis of water‐soluble hexagonal rare earth (RE=La, Gd, and Y) fluoride nanocrystals with uniform morphologies (mainly spheres and elongated particles) and small sizes (<50 nm). The unique role of the IL 1‐butyl‐3‐methylimidazolium hexafluorophosphate (BmimPF6) and n‐octanol in modulating the phase structure and particle size are discussed in detail. More importantly, the mechanism of the (n‐octanol‐induced) OA/IL two‐phase system, the formation of the RE fluoride nanocrystals, and the distinctive size‐ and morphology‐controlling capacity of the system are presented. BmimPF6 is versatile in term of crystal‐phase manipulation, size and shape maintenance, and providing water solubility in a one‐step reaction. The luminescent properties of Er3+‐, Ho3+‐, and Tm3+‐doped LaF3, NaGdF4, and NaYF4 nanocrystals were also studied. It is worth noting that the as‐prepared products can be directly dispersed in water due to the hydrophilic property of Bmim+ (cationic part of the IL) as a capping agent. This advantageous feature has made the IL‐capped products favorable in facile surface modifications, such as the classic Stober method. Finally, the cytotoxicity evaluation of NaYF4:Yb,Er nanocrystals before and after silica coating was conducted for further biological applications. 相似文献
Boronate ester complexes generated between methylene blue (MB+)‐functionalized Au nanoparticles (NPs) and electrode surfaces are implemented to stimulate the bioelectrocatalyzed reduction of H2O2 in the presence of horseradish peroxidase (HRP). Two kinds of Au NPs are prepared: Class I includes MB+/phenylboronic acid as a modifying layer, whereas Class II includes MB+/dithiothreitol as a mixed capping layer. The Class I or II NPs form boronate ester complexes with a dithiothreitol‐ or phenylboronic acid‐functionalized Au electrodes, respectively. By the cyclic loading of the NPs on the electrodes (pH 8.1), and the removal of the NPs (pH 1.5), switchable bioelectrocatalyzed reduction of H2O2 is demonstrated. 相似文献
Sulfonic acid functionalized SBA‐15 (SBA‐Pr‐SO3H) as a new nanoporous solid acid catalyst was applied in the green one‐pot synthesis of spirooxindole‐4H‐pyrans via condensation of isatins, malononitrile or methyl cyanoacetate or ethyl cyanoacetate, and 4‐hydroxycoumarin in water solvent. SBA‐Pr‐SO3H was proved to be an efficient heterogeneous nanoporous solid acid catalyst with a pore size of 6 nm that could be easily handled and removed from the reaction mixture by simple filtration and can be recovered and reused for several times without any loss of activity. The significant merits of present methodology are its simplicity, short reaction time, good yields, and environmentally benign mild reaction condition as water was used as a green solvent. 相似文献
Hollow‐structured nanomaterials with fluorescent properties are extremely attractive for image‐guided cancer therapy. In this paper, sub‐100 nm and hydrophilic NaYF4 upconversion (UC) hollow nanospheres (HNSs) with multicolor UC luminescence and drug‐delivery properties were successfully prepared by a facile one‐pot template‐free hydrothermal route using polyetherimide (PEI) polymer as the stabilizing agent. XRD, SEM, TEM, and N2‐adsorption/desorption were used to characterize the as‐obtained products. The growth mechanism of the HNSs has been systematically investigated on the basis of the Ostwald ripening. Under 980 nm excitation, UC emissions of HNSs can be tuned by a simple change of the concentration or combination of various upconverters. As a result, the PEI‐coated HNSs could be used as efficient probes for in vitro upconversion luminescence (UCL) cell imaging. Furthermore, a doxorubicin storage/release behavior and cancer‐cell‐killing ability investigation reveal that the product has the potential to be a drug carrier for cancer therapy. 相似文献
A novel thermal latent curing agent, 2MZS, was obtained through the reaction of 2‐methylimidazole (2MZ) and a symmetrically carboxyl‐functionalized star‐shaped molecule based on cyclotriphosphazene (N3P3‐COOH). In the complex, the resonance of N3P3‐COOH reduced the activity of lone electron pairs on the pyridine‐type nitrogen atom of imidazole ring, suppressing the nucleophilic attack and crosslinking reaction between 2MZ and epoxy resin. As a result, the storage stability was improved distinctly for the one‐pot epoxy compound, which could be steadily stored at room temperature for nearly 1 month. Nonisothermal DSC revealed a delayed initiation curing mechanism of the prepared one‐pot system, and which could undergo rapid curing reaction upon raising the temperature. Moreover, the introduction of terminally polyfunctional star‐shaped phosphazene derivative could promote the curing process at elevated temperature, as well as improve the chain rigidity of the cured resin by chemical incorporation into the cross‐linked network, thus endowing the cured resin with enhanced glassy storage modulus. The epoxy thermoset exhibited the highest glass transition temperature and thermal degradation temperature when 20 wt% of 2MZS was used. It is suggested that the novel latent curing agent is potential for high‐performance one‐pot epoxy compound, particularly recommended for application in electronic packaging fields. 相似文献
A facile one‐pot synthesis of highly water‐dispersible size‐tunable magnetite (Fe3O4) nanocrystal clusters (MNCs) end‐functionalized with amino or carboxyl groups by a modified solvothermal reduction reaction has been developed. Dopamine and 3,4‐dihydroxyhydroxycinnamic acid were used for the first time as both a surfactant and interparticle linker in a polylol process for economical and environment‐friendly purposes. Morphology, chemical composition, and magnetic properties of the prepared particles were investigated by several methods, including FESEM, TEM, XRD, XPS, Raman, FTIR, TGA, zeta potential, and VSM. The sizes of the particles could be easily tuned over a wide range from 175 to 500 nm by varying the surfactant concentration. Moreover, ethylene glycol/diethylene glycol (EG/DEG) solvent mixtures with different ratios could be used as reductants to obtain the particles with smaller sizes. The XRD data demonstrated that the surfactants restrained the crystal growth of the grains. The nanoparticles showed superior magnetic properties and high colloidal stability in water. The cytotoxicity results indicated the feasibility of using the synthesized nanocrystals in biology‐related fields. To estimate the applicability of the obtained MNCs in biotechnology, Candida rugosa lipase was selected for the enzyme immobilization process. The immobilized lipase exhibited excellent thermal stability and reusability in comparison with the free enzyme. This novel strategy would simplify the reaction protocol and improve the efficiency of materials functionalization, thus offering new potential applications in biotechnology and organocatalysis. 相似文献
The synthesis of thiol‐functionalized long‐chain highly branched polymers (LCHBPs) has been accomplished in combination of ring‐opening metathesis polymerization (ROMP) and thiol‐Michael addition click reaction. A monotelechelic polymer with a terminal acrylate and many pendent thiol groups is first prepared through adding an internal cis‐olefin terminating agent to the reaction mixture immediately after the completion of the living ROMP, and then utilized as an ABn‐type macromonomer in subsequent thiol‐ene reaction between acrylate and thiol, yielding LCHBPs as the reaction time prolonged. Au nanoparticles are then covalently conjugated onto the surface of thiol‐functionalized LCHBP to fabricate novel hybrid nanostructures, which is shown as one interesting application of such functionalized metathesis polymers. This facile approach can be extended toward the fabrication of novel nanomaterials with sophisticated structures and tunable multifunctionalities.
Magnetic graphene oxide functionalized with sulfonic acid (Fe3O4‐GO‐SO3H) was used as a new recyclable nanocatalyst for one‐pot synthesis of N‐aryl‐2‐amino‐1,6‐naphthyridine derivatives under solvent free conditions. The catalyst could be easily recovered from the reaction mixture by an external magnet and reused without significant decrease in activity even after 4 runs. This nanocatalyst exhibited better activities to other commercially available sulfonic acid catalysts. 相似文献
Polyaniline (PANI) microtubes with a hexagonal cross‐section are successfully synthesized by a self‐assembly process in the presence of 8‐hydroxyquinoline‐5‐sulfonic acid (HQS) as a dopant and FeCl3 as an oxidant. The wall thickness of the PANI/HQS microtubes can be adjusted by the content of the oxidant. It is proposed that the aniline/HQS salts serve as a hard template for the formation of the hexagonal‐cross‐section microtubes. Moreover, PANI/HQS microtubes combined with ZnSO4 show pH‐dependent fluorescence. PANI hexagonal‐cross‐section microtubes combined with a pH‐sensitive fluorescence may promise potential applications in fields such as chemical sensors and confined reaction vessels.
A green protocol has been developed for the synthesis of 1H‐pyrazolo[1,2‐b]phthalazine‐5,10‐diones by one‐pot cyclocondensation reaction of phthalhydrazide, aromatic aldehydes, and malononitrile or ethyl cyanoacetate using sulfonic acid functionalized SBA‐15 (SBA‐Pr‐SO3H) as a heterogeneous solid acid catalyst under solvent‐free conditions. 相似文献
A method for the catalytic generation of functionalized aryl alkali metals is reported. These highly reactive intermediates are liberated from silyl‐protected aryl‐substituted diazenes by the action of Lewis basic alkali metal silanolates, resulting in desilylation and loss of N2. Catalytic quantities of these Lewis bases initiate the transfer of the aryl nucleophile from the diazene to carbonyl and carboxyl compounds with superb functional‐group tolerance. The aryl alkali metal can be decorated with electrophilic substituents such as methoxycarbonyl or cyano as well as halogen groups. The synthesis of a previously unknown cyclophane‐like [4]arene macrocycle from a 1,3‐bisdiazene combined with a 1,4‐dialdehyde underlines the potential of the approach. 相似文献
In this study, surface‐functionalized, branched polyethylenimine (BPEI)‐modified YVO4:Bi3+,Eu3+ nanocrystals (NCs) were successfully synthesized by a simple, rapid, solvent‐free hydrothermal method. The BPEI‐coated YVO4:Bi3+,Eu3+ NCs with high crystallinity show broad‐band excitation in the λ=250 to 400 nm near‐ultraviolet (NUV) region and exhibit a sharp‐line emission band centered at λ=619 nm under excitation at λ=350 nm. The surface amino groups contributed by the capping agent, BPEI, not only improve the dispersibility and water/buffer stability of the BPEI‐coated YVO4:Bi3+,Eu3+ NCs, but also provide a capability for specifically targeted biomolecule conjugation. Folic acid (FA) and epidermal growth factor (EGF) were further attached to the BPEI‐coated YVO4:Bi3+,Eu3+ NCs and exhibited effective positioning of fluorescent NCs toward the targeted folate receptor overexpressed in HeLa cells or EGFR overexpressed in A431 cells with low cytotoxicity. These results demonstrate that the ligand‐functionalized, BPEI‐coated YVO4:Bi3+, Eu3+ NCs show great potential as a new‐generation biological luminescent bioprobe for bioimaging applications. Moreover, the unique luminescence properties of BPEI‐coated YVO4:Bi3+,Eu3+ NCs show potential to combine with a UVA photosensitizing drug to produce both detective and therapeutic effects for human skin cancer therapy. 相似文献
Molecules of the title β‐keto acid, 7‐oxobicyclo[2.2.1]heptane‐1‐carboxylic acid, C8H10O3, exhibit chirality due to the bridgehead carboxyl group, which is partially ordered and has a slightly asymmetric conformation. The molecules form centrosymmetric hydrogen‐bonded carboxyl dimers [O?O 2.639 (2) Å]. The title alkenoic γ‐keto acid, ()‐7‐oxobicyclo[2.2.1]hept‐5‐ene‐2‐endo‐carboxylic acid, C8H8O3, also forms typical centrosymmetric hydrogen‐bonded carboxyl dimers [O?O 2.660 (3) Å]. There is partial disorder of the carboxyl group in each compound. 相似文献