One-pot synthesis of highly conjugated benzofuran derivatives based on electrochemical oxidation of benzenediols in the presence of dibenzoylmethane

Electrochemical oxidation of benzenediols (1--4) has been studied in the presence of dibenzoylmethane (5) as a nucleophile using cyclic voltammetry and controlled-potential coulometry. The results indicate that the electrochemically generated quinones participate in Michael addition reaction with 5 via various mechanisms to produce new benzofuran derivatives. We derived various products based on electrochemical oxidation in the controlled potential condition, at carbon electrode without toxic reagents in an undivided cell and ambient condition.     

One-pot synthesis of conjugated alkynenitriles from aldehydes

A method of preparing conjugated alkynenitriles was developed from various aldehydes with CCl₃CN and PPh₃ in the presence of ^tBuLi. The reaction proceeded via α-chlorovinyl nitrile as an intermediate without any side reactions such as chlorination of starting aldehydes.     

One-pot synthesis of highly substituted indolines

A general and convenient one-pot synthesis of highly substituted indolines from arylhydrazines and aldehydes is reported. This synthesis allows introduction of substitution at essentially all positions of the indoline nucleus to achieve significant diversity in this biologically important template.     

One-pot synthesis of new symmetric and asymmetric xanthene dyes

Symmetric and asymmetric xanthene dyes have been prepared by a convenient one-step procedure from aldehyde and diol or m-aminophenol precursors using concentrated phosphoric acid as a solvent. This protocol provides access to water-soluble dyes with large Stoke’s shifts and far-red fluorescence emission. These compounds are envisioned as components of fluorescence-based sensors for a variety of imaging applications.     

One-pot synthesis of vinylisoxazolidines from simple hydroxylamines and conjugated carbonyls

Herein is reported the highly chemo- and regioselective synthesis of 3-vinyl-4-formyl and 3-vinyl-5-formylisoxazolidines from enals, hydroxylamines and dipolarophiles under thermal conditions. The reaction works in high yields for a large array of substituted enals and a variety of dipolarophiles. The reaction provides the respective isoxazolidines with high chemoselectivity, stereospecificity and diastereoselectivity without significant purification. The substitution pattern on the dipolarophile directs the regioselectivity of the reaction to provide either 3,4- or 3,5-substituted isoxazolidine isomers. This method provides access to a wide variety of highly substituted, stereochemically dense isoxazolidine scaffolds from the selective reaction of the three proposed components.     

Electrosynthesis of symmetric and highly conjugated benzofuran via a unique ECECCC electrochemical mechanism: evidence for predominance of electrochemical oxidation versus intramolecular cyclization

Electrochemical oxidation of hydroquinone, catechol, and some of their monosubstituted derivatives has been studied in the presence of 3-hydroxy-1H-phenalen-1-one (2) as a nucleophile in water/acetonitrile (80/20) solutions using cyclic voltammetry and controlled-potential coulometry methods. The results revealed that quinones derived from oxidation of hydroquinones and catechols participate in Michael addition reactions with 2. The formed adducts convert to the corresponding benzofuran derivatives via different mechanisms. In this work, we derived a variety of products with good yields using controlled potential electrochemical oxidation at a graphite electrode in an undivided cell.     

One-pot electrochemical synthesis of acid anhydrides from alcohols

Russian Journal of General Chemistry - One-pot indirect electrochemical oxidation of alcohols in the methylene chloride–aqueous solution of sodium hydrocarbonate two-phase system in the...     

One-pot synthesis of highly folded microparticles by suspension polymerization

A facile method of preparing highly folded cross-linked polymeric microparticles has been developed via one-pot suspension polymerization under high-speed homogenization. The wrinkles result from the evaporation of solvent in the cross-linked microparticles. The effects of microparticle cross-linking density and solvent on the polymer have been studied in detail. It was found that a medium cross-linking density (DVB/St = 0.5 by weight) is optimal for producing the most folded surface and the higher the solvent content, the deeper the surface wrinkles. This method is very simple and in principle can be applied to produce wrinkled microparticles with other chemical compositions.     

Highly conjugated multiporphyrins: synthesis, spectroscopic and electrochemical properties

A series of meso-to-meso ethynyl-bridged multiporphyrin arrays have been synthesized using Sonogoshira palladium-catalyzed cross-coupling reactions involving the appropriate ethynylporphyrin and iodoporphyrin precursors. The absorption spectra of these multiporphyrins show splitting of the Soret bands and significant red shifts of the Q bands as compared to the combination of the corresponding components. These conjugated multiporphyrins also show red shifts in their emission spectra as the pi-conjugation is expanded. In the electrochemical measurements, the porphyrins dimer 7 shows two 1 - e- oxidations at E(1/2) = +0.63 and +0.76 V for the first electron abstraction from the two porphyrin rings, indicating electronic communication between the two porphyrin units. The porphyrin trimer 4 exhibits the first and second 1 - e- oxidations at E(1/2) = +0.68 and +0.77 V, respectively, which correspond to the two outer porphyrins. The cyclic voltammogram of pentamer 5 shows two overlapping 1 - e- couples at E(1/2) = +0.56 and +0.66 V, and one 2 - e- couple at E(1/2) = +0.86 V, for the four outer porphyrin units. These results demonstrate that in the porphyrin trimer and pentamer the individual peripheral porphyrin units are electrochemically coupled via a central porphyrin core. The UV-Vis-NIR spectra of the oxidized species of these multiporphyrins exhibit a broad intervalence charge transfer (IVCT) band in the region from 1200 to 3000 nm. The present work shows that a central porphyrin unit appended with ethynyl bridges affords strong electronic interactions between the peripheral porphyrin rings over a distance of about 15 A.     

Photophysical, crystallographic, and electrochemical characterization of symmetric and unsymmetric self-assembled conjugated thiopheno azomethines

Novel conjugated azomethines consisting uniquely of thiophene units are presented. The highly conjugated compounds were synthesized by simple condensation of a stable diamino thiophene (2) with its complementary thiophene aldehydes. These interesting nitrogen-containing thiophene units exhibit variable reactivity leading to controlled aldehyde addition. Because of the different amino reactivity, a one-pot synthesis of unsymmetric and symmetric conjugated azomethines with varying number of thiophene units was possible by judicious choice of solvent and careful control of reagent stoichiometry. The resulting covalent conjugated connections are both reductively and hydrolytically resistant. The thermodynamically E isomer is formed uniquely for all of the azomethines synthesized, which is confirmed by crystallographic studies. These also demonstrated that the azomethine bonds and the thiophene units are highly planar and linear. The fluorescence and phosphorescence of the thiopheno azomethines measured are similar to those of thiophene analogues currently used in functional devices, but with the advantage of low triplet formation and band-gaps as low as 1.9 eV. The time-resolved and steady-state temperature-dependent photophysics revealed the thiopheno azomethines do not populate extensively their triplet manifold by intersystem crossing. Rather, their excited-state energy is dissipated predominantly by nonradiative means of internal conversion. Quasi-reversible electrochemical radical cation formation of the thiophene units was found. These compounds further undergo electrochemically induced oxidative cross-coupling, resulting in conjugated products that also exhibit reversible radical cation formation.     

One-pot synthesis of trisubstituted conjugated dienes via sequential Suzuki-Miyaura cross-coupling with alkenyl- and alkyltrifluoroborates

The sequential, stereoselective disubstitution of 1,1-dibromoalkenes using a variety of alkenyltrifluoroborates followed by alkyltrifluoroborates in the presence of Pd(PPh3)4 is described. This synthetic method proceeds smoothly in one pot under mild reaction conditions to provide the corresponding trisubstituted, conjugated dienes in excellent yield. Moreover, the method is operationally very simple because the organotrifluoroborates are stable in air, and the byproducts are innocuous inorganic salts.     

Unexpected one-pot synthesis of highly conjugated pentacyclic diquinoid compounds

A new class of pentacyclic diquinoid compounds has been synthesized with a facile one-pot reaction of two molecules of 2-hydroxynaphthoquinone and 1-bromoalkanes in the presence of ferrocene. These molecules were isolated as enol tautomers that exhibit intramolecular hydrogen bond and extended electronic conjugation as proved by the intense absorption spectrum with a broad band between 400 and 600 nm. The spectroscopic and electrochemical characterization of this new class of compounds has been performed. One of the synthesized diquinoid derivatives showed a significant cytotoxicity with IC(50) values of 25-50 μM against Cisplatin-Resistant SKOV3 and colon carcinoma SW480 cell lines. The results of our study provide a valuable tool to a one-pot synthesis of highly conjugated polyquinones, analogous to important biological systems, with significant antitumoral activity.     

Solvent effects on the three-photon absorption cross-section of a highly conjugated fluorene derivative

Herein, we report the study of the three-photon absorption cross-section dependence on solvents parameters for a highly conjugated organic dye, 2,2'-(4,4'-(1E,1'E)-2,2'-(9,9-didecyl-9H-fluorene-2,7-diyl) bis(ethene-2,1-diyl)bis(4,1-phenylene))dibenzo[d]thiazole (A-pi-pi-pi-A). The three-photon absorption cross-section was measured for this organic dye in solution in four different solvents with polarity function, Deltaf between 0.162 and 0.247. The experiments show how the solvent's reorientation of the electrons and polarity contribute to the 3PA cross-section. Multiphoton-absorption experiments of A-pi-pi-pi-A in all four different solvents were performed with a tunable OPG pumped by a 25 picosecond Nd-YAG laser.     

One-pot synthesis of highly monodispersed ferrite nanocrystals: surface characterization and magnetic properties

In the present study, a facile one-pot synthetic route, utilizing a strong polar organic solvent, N-methyl 2-pyrrolidone (NMP), is demonstrated to obtain highly monodispersed ferrite nanocrystals. The equimolar mixture of oleic acid, C(17)H(33)COOH (R-COOH), and oleylamine, C(18)H(35)NH(2) (R'-NH(2)), was used to coat the magnetic nanocrystals. Structural and magnetic properties of the ferrite nanocrystals were studied by a multitechnique approach including X-ray diffraction (XRD), high resolution transmission electron microscopy (HRTEM), Fourier transform infrared (FTIR) spectroscopy, thermogravimetric analysis (TGA), X-ray photoelectron spectroscopy (XPS), vibrating sample magnetometry (VSM), and M?ssbauer spectroscopy. FTIR spectral analysis indicates oleylamine helps in deprotonation of oleic acid, resulting in the formation of an acid-base complex, R-COOˉ:NH(3)(+)-R', which acts as binary capping agent. Structural and coordination differences of iron were studied by XPS and M?ssbauer spectral analysis. XPS analysis was carried out to examine the oxidation state of iron ions in iron oxide nanocrystals. The presence of a magnetically dead layer (～0.38 and ～0.67 nm) and a nonmagnetic organic coating (～2.3 and ～1.7 nm) may substantially reduce the saturation magnetization values for CoFe(2)O(4) and Fe(3)O(4) nanocrystals, respectively. The energy barrier distribution function of magnetic anisotropy was derived from the temperature dependent decay of magnetization. A very narrow energy barrier distribution elucidates that the ferrite nanocrystals obtained in this study are highly monodispersed.     

One-pot synthesis of highly functionalized stable ketenimines of 2,2,2-trifluoro-N-aryl-acetamides

Three-component reaction of alkyl isocyanides and dialkyl acetylenedicarboxylates in the presence of 2,2,2-trifluoro-N-aryl-acetamides in dichloromethane at ambient temperature afforded dialkyl 2-(N-(aryl)-2,2,2-trifluoroacetamido)-3-(alkylimino) methylene-succinate derivatives in excellent yields.     

One-pot synthesis of highly luminescent InP/ZnS nanocrystals without precursor injection

InP/ZnS core/shell nanocrystals are prepared using a single-step heating-up method relying on the difference in reactivity of the applied InP and ZnS precursors. The obtained particles exhibit size-dependent emission in the range of 480-590 nm, a fluorescence quantum yield of 50-70%, and high photostability.