Silicon‐based mercaptans: High‐performance monomers for thiol‐ene photopolymerization

Ester‐free silane and siloxane‐based thiol monomers were successfully synthesized and evaluated for application in thiol‐ene resins. Polymerization reaction rates, conversion, network properties as well as degradation experiments of those thiol monomers in combination with triallyl‐1,3,5‐triazine‐2,4,6(1H,3H,5H)‐trione (TATT) as ene component were performed and compared with formulations containing the commercially available mercaptopropionic ester‐based thiol pentaerythritol tetra‐3‐mercaptopropionate. Kinetic analysis revealed appropriate reaction rates and conversions reaching 90% and higher. Importantly, storage stability tests of those formulations clearly indicate the superiority of the synthesized mercaptans compared with pentaerythritol tetra‐3‐mercaptopropionate/TATT resins. Moreover, photocured samples containing silane‐based mercaptans provide higher glass transition temperatures and withstand water storage without a significant loss in their network properties. This behavior together with the observed excellent degradation resistance of photocured silane‐based thiol/TATT formulations make these multifunctional mercaptans interesting candidates for high‐performance applications, such as dental restoratives and automotive resins. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 418–424     

Chemo‐ and stereoselective polymerization of 3‐methylenehepta‐1,6‐Diene and Its thiol‐ene modification

Here we report on the coordination polymerization of a vinyl‐functionalized butadiene monomer, 3‐methylenehepta‐1,6‐diene (MHD) with exclusive conjugated diene chemoselectivity, high 1,2‐regioselectivity and moderate isotacticity (1,2‐selectivity > 99%, mm triad = 93%). Random copolymers of MHD and other conjugated diene (isoprene or myrcene) are also synthesized. The pendent vinyl groups of MHD homo or copolymers could be quantitatively converted into various functional groups via thiol‐ene click reaction. The resulting functionalized polybutadiene‐based material display versatile thermal and surface properties. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 1031–1039     

Bis‐hydrophilic and functional triblock terpolymers based on polyethers: Synthesis and self‐assembly in solution

A well‐defined triblock terpolymer, poly(ethylene glycol)‐block‐poly(allyl glycidyl ether)‐block‐poly(tert‐butyl glycidyl ether) (PEG‐b‐PAGE‐b‐Pt‐BGE), with a narrow molar mass distribution has been synthesized by sequential living anionic ring‐opening polymerization. Afterward, the PAGE block was modified via thiol‐ene chemistry and different sugar moieties or cysteine as a model compound for peptides could be covalently attached to the polymer backbone. The solution self‐assembly of the obtained bis‐hydrophilic triblock terpolymers in aqueous media has been studied in detail by turbidimetry, dynamic light scattering, and transmission electron microscopy (TEM and cryo‐TEM). © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Synthesis of polybenzoxazine precursors using thiols: Simultaneous thiol–ene and ring‐opening reactions

A new class of polybenzoxazine precursors of combined molecular structure of benzoxazine in the open and ring form has been developed. Thermally curable benzoxazine networks were obtained by simultaneous photoinduced thiol‐ene and Catalytic Opening of the Lateral Benzoxazine Rings by Thiols (COLBERT). The thiol‐ene reactions were initiated by photolysis of a free radical photoinitiator, 2, 2‐dimethoxy‐2‐phenyl acetophenone (DMPA), and the competing COLBERT reaction was triggered by thiol compound, 1,2‐ethanedithiol, present in the reaction mixture. The extent of reactions was evaluated by conducting experiments both under UV irradiation and in dark using model benzoxazines. The precursor soft films (pre‐P(B‐ala‐DTE)) were prepared by irradiating solutions of diallyl functional benzoxazine (B‐ala), 1,2‐ethanedithiol and DMPA. The obtained pre‐P(B‐ala‐DTE) films were then cured through thermally activated ring opening reaction of remaining benzoxazine groups yielding a more rigid and tough film. Thermal and mechanical properties of the films were investigated by DSC, DMA and TGA and compared with a typical polybenzoxazine, P(B‐ala). © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Thiol‐terminated polyisobutylene: Synthesis,characterization, and derivatization

Thiol‐terminated polyisobutylene (α,ω‐PIB‐SH) was synthesized from thiourea and α,ω‐bromine‐terminated PIB in a three‐step, one‐pot procedure, using a cosolvent system of 1:1 (v:v) heptane:dimethylformamide. The initial alkylisothiouronium salt was produced at 90 °C. Aqueous base hydrolysis at 110 °C resulted in thiolate chain ends, which were re‐acidified to form telechelic PIB‐SH. ¹H and ¹³C NMR confirmed thiol functionality and complete terminal halogen conversion. Thiol‐based “click” reactions were used to demonstrate PIB‐SH utility. Alkyne‐terminated PIB was synthesized by a phosphine‐catalyzed thiol‐ene Michael addition with propargyl acrylate. Reaction of this product with 6‐mercaptohexanol produced tetrahydroxy‐functional PIB by a sequential thiol‐ene/thiol‐yne procedure. ¹H NMR confirmed the structures of both products. PIB‐SH was reacted with isocyanates in the presence of base to produce polythiourethanes. A model reaction used phenyl isocyanate in THF with catalytic triethylamine. Similar conditions were used to produce PIB‐based thiourethanes with and without a small‐molecule chain extender. Increased molecular weights and thiol group conversion were observed with GPC and ¹H NMR, respectively. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Visible light‐induced thiol‐ene reaction: A new strategy to prepare Α,ω‐dithiol and Α,ω‐divinyl telechelic polythiolether oligomers

A new strategy is developed to prepare both α,ω‐dithiol and α,ω‐divinyl linear telechelic polythiolether oligomers by visible light induced thiol‐ene chemistry in the presence of a fac‐Ir(ppy)₃ photoredox catalyst. Polythiolether oligomers of well‐defined end groups and controlled molecular weights have been successfully synthesized at varying monomer molar ratios of 1,4‐benzenedimethanethiol (BDMT) to diethylene glycol divinyl ether (DEGVE). ¹H NMR and MALDI‐TOF MS analyses demonstrate that as‐prepared polythiolethers possess high end‐group fidelity, which is further supported by the successful polyaddition of polythiolethers bearing α,ω‐dithiol and α,ω‐divinyl groups. For example, with the α,ω‐dithiol‐ (M_n = 1900 g mol^?1, PDI = 1.25) and α,ω‐divinyl‐terminated (M_n = 2000 g mol^?1, PDI = 1.29) polythiolethers as macromonomers, the molecular weight of resulting polythiolether is up to 7700 g mol^?1 with PDI as 1.67. The reactivity of the terminal thiol group is further confirmed by the addition reaction with N‐(1‐pyrenyl)maleimide. UV‐vis spectra and fluorescene measurements suggest that fac‐Ir(ppy)₃ undergo a redox quenching process reacted with BDMT to generate thiyl free radicals. With these results, the mechanism of the thiol‐ene reaction catalyzed by photoredox catalyst is proposed. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 740–749     

Facile synthesis of dopa‐functional polycarbonates via thiol‐Ene‐coupling chemistry towards self‐healing gels

Since extraction of the naturally occurring mussel‐foot proteins is expensive and time‐consuming, routes towards synthetic analogues are continuously being explored. Often, these methods involve several protection and deprotection steps, making the synthesis of synthetic analogues time‐consuming and expensive as well. Herein, we show that UV‐initiated thiol‐ene coupling between a thiol‐functional dopamine derivative and an allyl‐functional aliphatic polycarbonate can be used as a fast and facile route to dopa‐functional materials. Different thiol‐to‐allyl ratios and irradiation protocols were used and it was found that nearly 50% of the allyl groups could be functionalized with dopa within short reaction times, without the need of protecting the catechol. It is also demonstrated herein that the dopa‐functional polymers can be used to form self‐healing gels through complexation with Fe³⁺ ions at increased pH. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 2370–2378     

Synthesis of water‐soluble allyl‐functionalized oligochitosan and its modification by thiol–ene addition in water

A novel, straightforward and versatile chemical pathway has been studied to functionalize water‐soluble chitosan oligomers. This metal‐free methodology is based on the epoxy‐amine reaction of the allyl glycidyl ether with chitosan, followed by thiol‐ene radical coupling reaction of ω‐functional mercaptans, using 4,4′‐Azobis(4‐cyanovaleric acid) as a free radical initiator. Both reactions were entirely carried out in water. In a preliminary step, chitosan depolymerization was carried out using H₂O₂ in an acetic medium under 100 W microwave irradiation, optimizing the yield of water‐soluble oligomers. Functionalization by six different thiols bearing alcohol, carboxylic acid, ester, and amino groups was then performed, leading to a range of functional oligochitosans with different grafting efficiencies. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 39–48     

Polyisobutylene‐based polyurethanes. VIII. Polyurethanes with ‐O‐S‐PIB‐S‐O‐ soft segments

We describe the synthesis, characterization, and select properties of a novel polyurethane (PU) prepared using a new polyisobutylene diol, HO‐CH₂CH₂‐S‐PIB‐S‐CH₂CH₂‐OH, soft segment and conventional hard segments. The diol is synthesized by terminal functionalization of ally‐telechelic PIB followed by low‐cost thiol‐ene click chemistry. Properties of ‐S‐ containing PU (PIB_S‐PU) containing 72.5% PIB were investigated and compared to similar PUs made with HO‐PIB‐OH (PIB_O‐PU). Hydrolytic resistance was studied by contact with phosphate‐buffered saline, oxidative resistance by immersing in concentrated HNO₃, and metal ion oxidation resistance by exposure to CoCl₂/H₂O₂. Hydrolytic and oxidative resistances of PIB_S‐PU and PIB_O‐PU are similar and superior to a commercial PDMS‐based PU, Elast‐Eon? E2A. According to ¹H NMR spectroscopy the ‐S‐ in PIB_S‐PUs remained unchanged upon treatment with HNO₃, however, oxidized mainly to ‐SO₂‐ by CoCl₂/H₂O_2. Static mechanical properties of PIB_S‐PU and PIB_O‐PU are similar, except creep resistance of PIB_S‐PU is surprisingly superior. The thermal stability of PIB_S‐PUs is ～15 °C higher than that of PIB_O‐PU. FTIR spectroscopy indicates H bonded S atoms (N‐H…S) between soft and hard segments, which noticeably affect properties. DSC and XRD studies suggest random low‐periodicity crystals dispersed within a soft matrix. Energy dispersive X‐ray spectroscopy–scanning electron microscopy indicates homogeneous distribution of S atoms on PIB_S‐PU surfaces. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 1119–1131     

Designed Synthesis of a 1D Polymer in Twist‐Stacked Topology via Single‐Crystal‐to‐Single‐Crystal Polymerization

To synthesize a fully organic 1D polymer in a novel twist‐stacked topology, we designed a peptide monomer HC≡CCH₂‐NH‐Ile‐Leu‐N₃, which crystallizes with its molecules H‐bonded along a six‐fold screw axis. These H‐bonded columns pack parallelly such that molecules arrange head‐to‐tail, forming linear non‐covalent chains in planes perpendicular to the screw axis. The chains arrange parallelly to form molecular layers which twist‐stack along the screw axis. Crystals of this monomer, on heating, undergo single‐crystal‐to‐single‐crystal (SCSC) topochemical azide–alkyne cycloaddition (TAAC) polymerization to yield an exclusively 1,4‐triazole‐linked polymer in a twist‐stacked layered topology. This topologically defined polymer shows better mechanical strength and thermal stability than its unordered form, as evidenced by nanoindentation studies and thermogravimetric analysis, respectively. This work illustrates the scope of topochemical polymerizations for synthesizing polymers in pre‐decided topologies.     

Functionalized PEG‐b‐PAGE‐b‐PLGA triblock terpolymers as materials for nanoparticle preparation

A series of poly(ethylene glycol)‐block‐poly(allyl glycidyl ether) (PEG‐b‐PAGE) macroinitiators are prepared using the living anionic ring‐opening polymerization (AROP) technique, and applied for further copolymerization studies. To overcome the low reactivity of the secondary hydroxyl end‐group of the PAGE block, a primary hydroxyl group is introduced into the macroinitiators via trityl and tert‐butyl‐dimethylsilane protective groups. The modified macroinitiators are used for copolymerization by applying different amounts of PEG‐b‐PAGE (5, 10, and 15%) and different PLGA lengths. To study their properties, nanoparticles from selected polymers are prepared and characterized by dynamic light scattering and scanning electron microscopy showing spherical particles with diameters around 200 nm and low PDI_particle values of 0.03–0.1. An advantage of the obtained polymers is the presence of double bonds in the side chain, which enables the modification via, for example, thiol‐ene reactions. For this purpose tertiary 2‐(dimethylamino)ethanethiol), acetylated thiogalactose and thiomannose are attached onto the double bonds of the PAGE‐blocks. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 2163–2174     

Synthesis and Spatiotemporal Modification of Biocompatible and Stimuli‐Responsive Carboxymethyl Cellulose Hydrogels Using Thiol‐Norbornene Chemistry

Carboxymethyl cellulose (CMC) is functionalized with norbornene groups to undergo thiol‐norbornene cross‐linking reactions. Hydrogels synthesized from a single norbornene‐modified carboxymethyl cellulose (NorCMC) via a light‐initiated thiol‐ene cross‐linking reaction with a variety of dithiol cross‐linkers yield hydrogels with a tunable compression modulus ranging from 1.7 to 103 kPa. Additionally, thermoresponsiveness is spatiotemporally imparted to NorCMC hydrogels by photopatterning a dithiol‐terminated poly(N‐isopropyl acrylamide) cross‐linker, enabling swelling and topological control of the hydrogels as a function of incubation temperature. NorCMC hydrogels are cytocompatible as the viability of encapsulated human mesenchymal stem cells (hMSCs) is greater than 85% after 21 d while using a variety of cross‐linkers. Moreover, hMSCs can remodel, adhere, and spread in the NorCMC matrix cross‐linked with a matrix metalloproteinase‐degradable peptide, further demonstrating the utility of these materials as a tunable biomaterial.     

ABC type miktoarm star copolymers through combination of controlled polymerization techniques with thiol‐ene and azide‐alkyne click reactions

ABC type miktoarm star copolymer with polystyrene (PS), poly(ε‐caprolactone) (PCL) and poly(ethylene glycol) (PEG) arms was synthesized using controlled polymerization techniques in combination with thiol‐ene and copper catalyzed azide‐alyne “click” reactions (CuAAC) and characterized. For this purpose, 1‐(allyloxy)‐3‐azidopropan‐2‐ol was synthesized as the core component in a one‐step reaction with high yields (96%). Independently, ω‐thiol functionalized polystyrene (PS‐SH) was synthesized in a two‐step protocol with a very narrow molecular weight distribution. The bromo end function of PS obtained by atom transfer radical polymerization was first converted to xanthate function and then reacted with 1, 2‐ethandithiol to yield desired thiol functional polymer (PS‐SH). The obtained polymer was grafted onto the core by thiol‐ene click chemistry. In the following stage, ε‐caprolactone monomer was polymerized from the core by ring opening polymerization (ROP) using tin octoate as catalyst through hydroxyl groups to form the second arm. Finally, PEG‐acetylene, which was simply synthesized by the esterification of Me‐PEG and 5‐pentynoic acid, was clicked onto the core through azide groups present in the structure. The intermediates at various stages and the final miktoarm star copolymer were characterized by ¹H NMR, FTIR, and GPC measurements. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Application of thiol‐ene click chemistry to preparation of functional polyethylene with high molecular weight and high polar group content: Influence of thiol structure and vinyl type on reactivity

A series of functional polyethylenes have been simply and efficiently synthesized via the combination of regioselective ethylene/5‐vinyl‐2‐norbornene (VNB) copolymerization using [PhNC(CF₃)CHCO(Ph)]₂TiCl₂ catalyst and following ultraviolet light initiated thiol‐ene click reaction. On treatment of ethylene/VNB copolymer with different thiols including mercaptoethanol, 1‐thioglycerol, methyl mercaptoacetate, methyl mercaptopropionate, 2‐mercaptoethylamine, mercaptoacetic acid, and mercaptopropanoic acid, various polar groups have been successfully introduced into the polyethylene. Except 2‐mercaptoethylamine, the functionalizations are quite efficient with the degree of functionalization higher than 94%, which is independent of thiol structure and double bond content. The content of polar group in functional polyethylene can be tuned in a wide range of 0–30 mol %. Gel permeation chromatography profiles indicate all functional polyethylenes that have very high molecular weights (160–336 kg/mol) with homogeneous formation. Besides, systematic investigation of the influence of vinyl type and thiol structure on reactivity has been also carried out. By treatment of mercaptoethanol with different copolymers (ethylene/VNB, ethylene/5‐ethylidene‐2‐norbornene, and ethylene/dicyclopentadiene copolymer), the order of vinyl reactivity can be summarized as terminal > internal > cyclic double bond. For different thiols, the reactivity has the sequence of SHCH₂COOH > SHCH₂COOCH₃ > SHCH₂CH₂COOH > SHCH₂CH₂COOCH₃ > SHCH₂CH(OH)CH₂OH > SHCH₂CH₂OH > SHCH₂CH₂NH₂, which is depended on the solubility and the electron‐withdrawing inductive effect of polar group. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

An emerging post‐polymerization modification technique: The promise of thiol‐para‐fluoro click reaction

Post‐polymerization modification (PPM) of polymers is extremely beneficial in terms of designing brand new synthetic pathways toward functional complex polymers. Fortunately, the new developments in the field of organic chemistry along with controlled/living radical polymerization (CLRP) techniques have enabled scientists to readily design and synthesize the functionalized‐polymers for wide range of applications via the PPM. In this regard, the reactivity of para‐fluorine atom in the fluorinated aromatic structures toward the nucleophilic substitution reactions has made the polymers possessing this group to become a very strong candidate that can undergo efficient PPM. Besides, it has been proven that the thiol‐functionalized compounds react with the para‐fluorine atom of the pentafluorophenyl group more rapidly and efficiently than the amine‐ and the hydroxyl‐functionalized compounds. Furthermore, the milder experimental conditions to achieve quantitative conversions have led to the reaction between the thiol and the structures possessing pentafluorophenyl groups to be referred to as a click‐type reaction. Given this information, this review article aims to present the scientific developments regarding the thiol‐para‐fluoro “click” (TPF‐click) chemistry, and its impact on PPM to construct novel polymeric structures. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 1181–1198