Ultrasmall iron oxide nanoparticles for biomedical applications: improving the colloidal and magnetic properties

A considerable increase in the saturation magnetization, M(s) (40%), and initial susceptibility of ultrasmall (<5 nm) iron oxide nanoparticles prepared by laser pyrolysis was obtained through an optimized acid treatment. Moreover, a significant enhancement in the colloidal properties, such as smaller aggregate sizes in aqueous media and increased surface charge densities, was found after this chemical protocol. The results are consistent with a reduction in nanoparticle surface disorder induced by a dissolution-recrystallization mechanism.     

Bacteria-mediated precursor-dependent biosynthesis of superparamagnetic iron oxide and iron sulfide nanoparticles

The bacterium Actinobacter sp. has been shown to be capable of extracellularly synthesizing iron based magnetic nanoparticles, namely maghemite (gamma-Fe2O3) and greigite (Fe3S4) under ambient conditions depending on the nature of precursors used. More precisely, the bacterium synthesized maghemite when reacted with ferric chloride and iron sulfide when exposed to the aqueous solution of ferric chloride-ferrous sulfate. Challenging the bacterium with different metal ions resulted in induction of different proteins, which bring about the specific biochemical transformations in each case leading to the observed products. Maghemite and iron sulfide nanoparticles show superparamagnetic characteristics as expected. Compared to the earlier reports of magnetite and greigite synthesis by magnetotactic bacteria and iron reducing bacteria, which take place strictly under anaerobic conditions, the present procedure offers significant advancement since the reaction occurs under aerobic condition. Moreover, reaction end products can be tuned by the choice of precursors used.     

Recent developments in oriented polymers for biomedical and engineering applications

A review is presented of recent research at Leeds University which has been directed at devising novel methods for the production of oriented polymer structures. First, the new hot compaction process for oriented fibre and tapes is described, together with its applications to polyethylene and polypropylene where there are a number of practical developments. Secondly, there is the use of hydrostatic extrusion to make load bearing oriented products from hydroxyapatite filled polyethylenes. The production routes include the application of high pressure annealing prior to hydrostatic extrusion and the preparation of high modulus polyethylene fibre/hydroxyapatite billets as the starting point. Finally, recent progress on die-drawing as a means to producing oriented monofilaments and biaxially oriented tubes is described, where the applications include polymer ropes, pipes for gas and water distribution and transparent cans for packaging.     

Ultrafine agarose-coated superparamagnetic iron oxide nanoparticles (AC-SPIONs): a promising sorbent for drug delivery applications

A method for one-step synthesis of ultrafine agarose-coated superparamagnetic iron oxide nanoparticles (AC-SPIONs) was developed. The method is facile and fast and requires no organic solvent or surfactant. The average particle size of the prepared AC-SPIONs was only 20–40 nm with a narrow size distribution and with large saturation magnetization at room temperature. The obtained ultrafine nanogel particles were characterized by scanning electron microscopy, energy-dispersive X-ray analysis, Fourier transform infrared spectroscopy, transmission electron microscopy and vibrating sample magnetometer techniques. The AC-SPIONs were epoxy-activated by epichlorohydrin and aminated by ammonium hydroxide. The amination of the particles was investigated by the Kaiser test. The adsorption of two model compounds (gallic acid and ellagic acid) on the functionalized nanoparticles and their releases from them were investigated spectrophotometrically in three different pH values under biological conditions. The functionalized AC-SPIONs displayed good adsorption and in vitro drug release in a phosphate-buffered saline (pH 7.4). The ultrafine AC-SPIONs can be potentially used in magnetic solid-phase extraction, drug delivery, protein purification and enzyme immobilization methods.     

Gold nanoparticles in biomedical applications: recent advances and perspectives

Gold nanoparticles (GNPs) with controlled geometrical, optical, and surface chemical properties are the subject of intensive studies and applications in biology and medicine. To date, the ever increasing diversity of published examples has included genomics and biosensorics, immunoassays and clinical chemistry, photothermolysis of cancer cells and tumors, targeted delivery of drugs and antigens, and optical bioimaging of cells and tissues with state-of-the-art nanophotonic detection systems. This critical review is focused on the application of GNP conjugates to biomedical diagnostics and analytics, photothermal and photodynamic therapies, and delivery of target molecules. Distinct from other published reviews, we present a summary of the immunological properties of GNPs. For each of the above topics, the basic principles, recent advances, and current challenges are discussed (508 references).     

Biodistribution of ultra small superparamagnetic iron oxide nanoparticles in BALB mice

Recently ultrasmall superparamagnetic iron oxide (USPIO) nanoparticles (NPs) have been widely used for medical applications. One of their important applications is using these particles as MRI contrast agent. While various research works have been done about MRI application of USPIOs, there is limited research about their uptakes in various organs. The aim of this study was to evaluate the biodistribution of dextran coated iron oxide NPs labelled with ^99mTc in various organs via intravenous injection in Balb/c mice. The magnetite NPs were dispersed in phosphate buffered saline and SnCl₂ which was used as a reduction reagent. Subsequently, the radioisotope ^99mTc was mixed directly into the reaction solution. The labeling efficiency of USPIOs labeled with ^99mTc, was above 99 %. Sixty mice were sacrificed at 12 different time points (From 1 min to 48 h post injections; five mice at each time). The percentage of injected dose per gram of each organ was measured by direct counting for 19 harvested organs of the mice. The biodistribution of ^99mTc-USPIO in Balb/c mice showed dramatic uptake in reticuloendothelial system. Accordingly, about 75 percent of injected dose was found in spleen and liver at 15 min post injection. More than 24 % of the NPs remain in liver after 48 h post-injection and their clearance is so fast in other organs. The results suggest that USPIOs as characterized in our study can be potentially used as contrast agent in MR Imaging, distributing reticuloendothelial system specially spleen and liver.     

电催化剂设计中表面和界面工程的最新进展

电催化已发展为一种涉及电化学、表面科学、材料科学和催化科学等众多科学分支的交叉学科和综合技术,在工农业生产、经济和国防建设、能源开发和环境保护等方面发挥了不可或缺的作用。金属纳米催化剂的可控合成和创新构建,极大地推动了电催化的广泛应用和巨大进展。过渡金属尤其是贵金属Pt、Pd等电催化剂,在电催化中表现出良好的选择性、活性和稳定性,很难完全被其他材料所取代。制约电催化可持续发展的瓶颈问题是,如何设计、合成和构建高性能低成本的金属纳米催化剂。为实现这一目标,人们付出了大量的努力并取得了一些可喜的进展。电催化是发生在电解质与电极材料表面和界面的异相催化反应,金属纳米电催化剂的性能与其形貌、结构、尺寸和组成相关。本文着力总结和探讨如何从表面工程和界面工程角度设计、合成和构筑金属纳米结构及其复合结构,以实现金属电催化剂性能和成本的双优化。本文提出了在金属纳米结构及其复合结构的设计、合成和构筑过程中需要考虑的几个重要的表面和界面因素,即表面面积、表面晶面、活性位点和界面结构等。首先,有效表面面积越大,越有利于电催化反应。我们总结了增大催化剂有效活性面积的四种有效方法,包括减小颗粒尺寸、制成薄层二维纳米结构、增大粗糙度、形成中空、多孔或介孔及框架结构等。其次,表面晶面也可决定电催化的性能。我们简单总结了低指数晶面和高指数晶面在表面能、晶面形成和催化活性上的“挑战与机遇”矛盾关系,并简要阐述了晶面选择性即晶面效应以及晶面与尺寸的依赖关系。再次,活性位点一般指的是低配位表面原子位点,是电催化反应的决定因素之一。我们描述了活性位点与表面和界面结构特征、纳米晶表面晶面、表面缺陷和空穴、表面面积和粒子尺寸等的依赖关系。最后,界面结构工程是调控电催化性能的最丰稔因素。我们简述了界面结构的形成、分类及其对优化界面活性位点的成分和几何结构、表面悬键和原子配位数、电子结构与电子传递、质子传输和物种交换等方面调控作用,并在界面工程的基础上推介了贵金属基复合结构的合成、组装的几种典型方式。本文以具体示例的形式,分别从表面工程和界面工程的角度,扼要介绍了本课题组最近在甲酸氧化、氧还原、析氢等电催化反应体系中贵金属基纳米结构及其复合纳米结构电催化剂的设计、合成与构筑的具体做法。我们分别介绍了低指数晶面和高指数晶面的表面设计对于提高催化剂性能的关键作用。对于低指数晶面,我们重点介绍了如何获得相似尺寸的不同表面晶面以研究其晶面效应,如何维持相同晶面调节尺寸以研究其尺寸效应,如何建造与电极有良好电学接触的低指数晶面纳米结构,以利于提升其电催化性能。对于高指数晶面,介绍了几种形成高指数晶面的途径,并阐明了其晶面对电催化性能的影响。另一方面,我们从金属纳米结构及其复合结构的成分和结构调控策略介绍了界面构建对于提升电催化性能的奇妙作用,包括建造多金属纳米结构、与二维材料负载组装和利用界面极化。由此,本文总结了表面和界面工程对于电催化剂设计、合成和构筑目前面临的三个关键挑战。     

Cellular level loading and heating of superparamagnetic iron oxide nanoparticles

Superparamagnetic iron oxide nanoparticles (NPs) hold promise for a variety of biomedical applications due to their properties of visualization using magnetic resonance imaging (MRI), heating with radio frequency (rf), and movement in an external magnetic field. In this study, the cellular loading (uptake) mechanism of dextran- and surfactant-coated iron oxide NPs by malignant prostate tumor cells (LNCaP-Pro5) has been studied, and the feasibility of traditional rf treatment and a new laser heating method was evaluated. The kinetics of cell loading was quantified using magnetophoresis and a colorimetric assay. The results showed that loading of surfactant-coated iron oxide NPs with LNCaP-Pro5 was saturable with time (at 24 h) and extracellular concentration (11 pg Fe/cell at 0.5 mg Fe/mL), indicating that the particles are taken up by an "adsorptive endocytosis" pathway. Dextran-coated NPs, however, were taken up less efficiently (1 pg Fe/cell at 0.5 mg Fe/mL). Loading did not saturate with concentration suggesting uptake by fluid-phase endocytosis. Magnetophoresis suggests that NP-loaded cells can be held using external magnetic fields in microcirculatory flow velocities in vivo or in an appropriately designed extracorporeal circuit. Loaded cells were heated using traditional rf (260A, 357 kHz) and a new laser method (532 nm, 7 ns pulse duration, 0.03 J/pulse, 20 pulse/s). Iron oxide in water was found to absorb sufficiently strongly at 532 nm such that heating of individual NPs and thus loaded cells (1 pg Fe/cell) was effective (<10% cell survival) after 30 s of laser exposure. Radio frequency treatment required higher loading (>10 pg Fe/cell) and longer duration (30 min) when compared to laser to accomplish cell destruction (50% viability at 10 pg Fe/cell). Scaling calculations show that the pulsed laser method can lead to single-cell (loaded with NPs) treatments (200 degrees C temperature change at the surface of an individual NP) unlike traditional rf heating methods which can be used only for bulk tissue level treatments. In a mixture of normal and NP-loaded malignant tumor cells, the malignant cells were selectively destroyed after laser exposure leaving the unloaded normal cells intact. These studies hold promise for applications in cell purification and sorting and extracorporeal blood treatments in vitro.     

Magnetic fluid hyperthermia: focus on superparamagnetic iron oxide nanoparticles

Due to their unique magnetic properties, excellent biocompatibility as well as multi-purpose biomedical potential (e.g., applications in cancer therapy and general drug delivery), superparamagnetic iron oxide nanoparticles (SPIONs) are attracting increasing attention in both pharmaceutical and industrial communities. The precise control of the physiochemical properties of these magnetic systems is crucial for hyperthermia applications, as the induced heat is highly dependent on these properties. In this review, the limitations and recent advances in the development of superparamagnetic iron oxide nanoparticles for hyperthermia are presented.     

Facile preparation of zwitterion-stabilized superparamagnetic iron oxide nanoparticles (ZSPIONs) as an MR contrast agent for in vivo applications

We describe a simple method for synthesizing superparamagnetic nanoparticles (SPIONs) as small, stable contrast agents for magnetic resonance imaging (MRI) based on sulfobetaine zwitterionic ligands. SPIONs synthesized by thermal decomposition were coated with zwitterions to impart water dispersibility and high in vivo stability through the nanoemulsion method. Zwitterion surfactant coating layers are formed easily on oleic acid-stabilized SPIONs via hydrophobic and van der Waals interactions. Our zwitterion-coated SPIONs (ZSPIONs) had ultrathin (～5 nm) coating layers with mean sizes of 12.0 ± 2.5 nm, as measured by dynamic light scattering (DLS). Upon incubation in 1 M NaCl and 10% FBS, the ZSPIONs showed high colloidal stabilities without precipitating, as monitored by DLS. The T2 relaxivity coefficient of the ZSPIONs, obtained by measuring the relaxation rate on the basis of the iron concentration, was 261 mM(-1) s(-1). This value was much higher than that of the commercial T2 contrast agent because of the ultrathin coating layer. Furthermore, we confirmed that ZSPIONs can be used as MR contrast agents for in vivo applications such as tumor imaging and lymph node mapping.     

Recent advances in high surface area electrodes for bioelectrochemical applications

The search for high surface area electrodes for bioelectrochemical applications is becoming more intense. In the last few years, new strategies have emerged to develop three-dimensional electrode materials with very well controlled architecture providing at the same time high specific surface, bendability and flexibility. This review will highlight some of the recent work published in the last 2 years and will discuss the issue of mathematical modeling of porous electrodes and what could be the future of high surface area electrodes materials.     

Combined ATRP and 'click' chemistry for designing stable tumor-targeting superparamagnetic iron oxide nanoparticles

Important issues in the design of superparamagnetic iron oxide nanoparticles (SPIONs) for cancer diagnosis include stability under physiological conditions and specificity in targeting the cancer cells. In the present study, atom transfer radical polymerization (ATRP) was used to graft SPIONs with poly(glycidyl methacrylate-co-poly(ethylene glycol) methyl ether methacrylate) (SPIONs-P(GMA-co-PEGMA)). The PEGMA in the copolymer chain confers high stability to the nanoparticles in aqueous medium, and prevents recognition by macrophages with the aim of prolonging their in vivo circulation time. The GMA groups were used for conjugating the cancer targeting ligand, folic acid (FA), via 'click' chemistry. Using this method, the amount of FA conjugated to the nanoparticles (SPIONs-P(GMA-co-PEGMA)-FA) can be readily controlled. The specificity of cellular uptake of the nanoparticles by three different cell lines was investigated. The cellular iron uptake by KB cells (human epidermoid carcinoma) after 24 h of incubation is about thirteen and five times higher than those by 3T3 fibroblasts and macrophages, respectively. No significant cytotoxicity was observed with these three types of cells. The high targeting efficiency and biocompatibility of these nanoparticles are promising features for in vivo specific targeting and detection of tumor cells which overexpress the folate receptor.     

Effect of poly(ethylene oxide)-silane graft molecular weight on the colloidal properties of iron oxide nanoparticles for biomedical applications

The size, charge, and stability of colloidal suspensions of magnetic nanoparticles with narrow size distribution and grafted with poly(ethylene glycol)-silane of different molecular weights were studied in water, biological buffers, and cell culture media. X-ray photoelectron spectroscopy provided information on the chemical nature of the nanoparticle surface, indicating the particle surfaces consisted of a mixture of amine groups and grafted polymer. The results indicate that the exposure of the amine groups on the surface decreased as the molecular weight of the polymer increased. The hydrodynamic diameters correlated with PEG graft molecular weight and were in agreement with a distributed density model for the thickness of a polymer shell end-grafted to a particle core. This indicates that the particles obtained consist of single iron oxide cores coated with a polymer brush. Particle surface charge and hydrodynamic diameter were measured as a function of pH, ionic strength, and in biological buffers and cell culture media. DLVO theory was used to analyze the particle stability considering electrostatic, magnetic, steric, and van der Waals interactions. Experimental results and colloidal stability theory indicated that stability changes from electrostatically mediated for a graft molecular weight of 750 g/mol to sterically mediated at molecular weights of 1000 g/mol and above. These results indicate that a graft molecular weight above 1000 g/mol is needed to produce particles that are stable in a wide range of pH and ionic strength, and in cell culture media.     

Stimulus-responsive polymeric nanoparticles for biomedical applications

Polymeric nanoparticles with unique properties are regarded as the most promising materials for biomedical applications including drug delivery and in vitro/in vivo imaging.Among them,stimulus-responsive polymeric nanoparticles,usually termed as intelligent nanoparticles,could undergo structure,shape,and property changes after being exposed to external signals including pH,temperature,magnetic field,and light,which could be used to modulate the macroscopical behavior of the nanoparticles.This paper reviews ...     

Recent advances of injectable hydrogels for drug delivery and tissue engineering applications

Injectable hydrogel is a kind of in situ gelling system but has its specificity on the process procedure, which requires a better control of gelation kinetics. Hydrogels with injectability under mild condition are preferred in the field of biomedicine, especially for drug delivery and tissue engineering, because of the favorable carrier property in three-dimension, biocompatibility, low invasive and adaptable shape for administration. Despite the advantages, the development of injectable hydrogels may also face some challenges to meet the various clinical requirements. In this review, we provide a brief summary on the recent progresses on the design, synthesis and evaluation of injectable hydrogels towards biomedical applications.     

Interaction of bare and gold-coated superparamagnetic iron oxide nanoparticles with fetal bovine serum

Superparamagnetic iron oxide nanoparticles (SPIONs) are being increasingly used in various biomedical processes such as hyperthermia, cell and protein separation, enhancing resolution of magnetic resonance imaging and drug delivery. Here, SPIONs were prepared by optimized co-precipitation of iron chlorides in basic medium and then coated with gold. Bare SPIONs and Aucoated SPIONs were characterized by TEM before incubation with fetal bovine serum for 0.5, 1, 2, 4, 8 and 24 h. After these interaction times, the mixture was deposed on a small column in a strong magnetic field (MACS?system). The SPIONs were retained; different washing fractions were collected and studied by UV-Vis spectroscopy and by 1D gel electrophoresis. The study revealed the presence of proteins in the washing solutions and confirmed the strong interaction of the protein with the SPIONs.     

Bis-phosphonates-ultra small superparamagnetic iron oxide nanoparticles: a platform towards diagnosis and therapy

A new type of multifunctional magnetic nano-platform for diagnosis and therapy applications was designed using bisphosphonate/carboxylic ligands.