Quantitative determination of aflatoxin B1-oxime by column liquid chromatography with ultraviolet detection.

Liquid chromatography was used for the quantification of aflatoxin B1-oxime (AFB1-oxime). The yield of AFB1-oxime in the reaction mixture was 89%, while after purification on silica gel it was 72%. LC analysis of the reaction mixture after silica gel fractionation revealed a retention time of 0.84 min for AFB1-oxime, 8.42 min for AFB1, 1.21 min for unknown 1 and 1.61 min for unknown 2. UV-visible analysis of the reaction mixture after silica gel fractionation showed a lambda(max) of 269 and 361 nm for AFB1-oxime, 263 and 360 nm for AFB1, 273 nm for unknown 1 and 275 nm for unknown 2. Excitation and emission wavelengths were found to be 269 and 368/438 nm for AFB1-oxime, 359/424 nm for AFB1, 270 and 367/450 nm for unknown 1 and 273 and 416/447 nm for unknown 2. The method may find versatile application in monitoring reactions for the preparation of oximes of various analytes for the synthesis of their immunogens.     

Concentrations of 239,240Pu and 241Am of marine products in coastal waters of Ibaraki

More than 200 samples of marine products have been collected and analyzed for plutonium and almost 100 samples for americium around Hitachi, Tokai and Oarai in the pacific coast of Ibaraki prefecture. The data have shown that the concentration factor (CF) values for plutonium were 330 for bivalve, 770 for abalone (muscle) and 610 for brown algae. For americium, the CF was calculated as 2400 for bivalve, 1000 for abalone (muscle) and 420 for brown algae.     

Theoretical analysis of resonant raman scattering: Simulations of lineshapes and excitation profiles

The steady-state response of a three-level system in the presence of a strong laser field is described with the density operator formalism, in order to derive an analytical expression for the intensity of resonance Raman scattering. The Liouville equation for the density operator is written in quantum form for both the molecular system and the radiation field, making use of the dipole and rotating-wave approximations for the matter-radiation interaction, and of the Markov approximation for the molecular decays. The equation is solved exactly for the laser field, and in perturbative way for the generated field. The results account for power broadening of the generated line. Rabi intensity-dip of the generated signal, and for the excitation profiles in the Franck-Condom approximation.     

Determination of fumonisins B1 and B2 in corn and corn flakes by liquid chromatography with immunoaffinity column cleanup: collaborative study.

A liquid chromatographic (LC) method for the determination of fumonisins B1 (FB1) and B2 (FB2) in corn and corn flakes was collaboratively studied by 23 laboratories, which analyzed 5 blind duplicate pairs of each matrix to establish the accuracy, repeatability, and reproducibility characteristics of the method. Fumonisin levels in the corn ranged from <0.05 (blank) to 1.41 microg/g for FB1 and from <0.05 to 0.56 microg/g for FB2, whereas in the corn flakes they ranged from <0.05 to 1.05 microg/g for FB1 and from <0.05 to 0.46 microg/g for FB2. The method involved double extraction with acetonitrile-methanol-water (25 + 25 + 50), cleanup through an immunoaffinity column, and LC determination of the fumonisins after derivatization with o-phthaldialdehyde. Relative standard deviations for the within-laboratory repeatability (RSDr) of the corn analyses ranged from 19 to 24% for FB1 and from 19 to 27% for FB2; for the corn flakes analyses, RSDr ranged from 9 to 21 % for FB1 and from 8 to 22% for FB2. Relative standard deviations for the between-laboratories reproducibility (RSDR) of the corn analyses ranged from 22 to 28% for FB1 and from 22 to 30% for the FB2; for corn flakes analyses, RSDR ranged from 27 to 32% for FB1 and from 26 to 35% for FB2. Mean recoveries of FB1 and FB2 from corn spiked with FB1 at 0.80 microg/g and with FB2 at 0.40 microg/g were 76 and 72%, respectively; for corn flakes spiked at the same levels recoveries were 110 and 97% for FB1 and FB2, respectively. HORRAT ratios for the analyses of corn ranged from 1.44 to 1.53 for FB1 and from 0.96 to 1.48 for FB2, whereas for corn flakes they ranged from 1.60 to 1.82 for FB1 and from 1.39 to 1.68 for FB2.     

Traditional medicine in Syria: folk medicine in Aleppo governorate

The use of Traditional Arabic Medicine (TAM) for various diseases has been popular but scarcely studied in Syria. In the present study, we carried out ethnobotanical and ethnopharmacological research on the plants traditionally used to cure various diseases in northern Syria. The information was collected from the city and villages of the Aleppo governorate "Mohaafazah" in the north of Syria, collecting data directly on the basis of a detailed survey of inhabitants and herbalists. In this survey, we found that hundreds of plant species are still in use in TAM for the treatment of various diseases. We selected the most common 100 species, used in the treatment of more than 25 diseases. Among these plants, 53 are used for treating gastrointestinal disorders, 38 for respiratory system diseases, including asthma, bronchitis and cough, 34 for skin diseases, 21 for diabetes, 17 for kidney and urinary disorders, 16 for cardiac disorders, 14 for infertility and sexual impotency, 13 for treating liver diseases, 13 for several types of cancer, 9 for enhancing breast milk excretion, 8 for weight loss, 5 for reducing cholesterol, and three for weight gain. Plants were collected and identified: scientific Latin names, local names, the used parts of the plant, the herbal preparations and the local medical uses are described. Scientific literature concerning the activity of the investigated species is also reported and discussed according to their traditional uses.     

X-ray fluorescence analysis of rare earth elements in rocks using low dilution glass beads.

Major and trace elements (Na, Mg, Al, Si, P, K, Ca, Ti, Mn, Fe, Rb, Sr, Y, Zr, La, Ce, Pr, Nd, Sm, Gd, Dy, Th and U) in igneous rocks were assayed with fused lithium borate glass beads using X-ray fluorescence spectrometry. Low dilution glass beads, which had a 1:1 sample-to-flux ratio, were prepared for determination of rare earth elements. Complete vitrification of 1:1 mixture required heating twice at 1200 degrees C with agitation. Extra pure reagents containing determinants were used for calibrating standards instead of the rock standard. The calibration curves of the 23 elements showed good linearity. Furthermore, the lower limits of detection corresponding to three times the standard deviation for blank measurements were 26 mass ppm for Na2O, 6.7 for MgO, 4.5 for Al2O3, 4.5 for SiO2, 18 for P2O5, 1.1 for K2O, 4.0 for CaO, 3.9 for TiO2, 1.6 for MnO, 0.8 for Fe2O3, 0.5 for Rb, 0.2 for Sr, 0.4 for Y, 0.5 for Zr, 3.3 for La, 6.5 for Ce, 2.7 for Pr, 2.1 for Nd, 1.7 for Sm, 0.7 for Gd, 2.7 for Dy, 0.5 for Th, and 0.6 for U. Using the present method, we determined the contents of these 23 elements in four rhyolitic and granitic rocks from Japan.     

A pilot study for the preparation of a new Reference Material based on antarctic krill

The preparation of new Certified Reference Materials (CRMs) of antarctic matrices forms the backbone of an ongoing project in the framework of the Italian National Program for Antarctic Research. The first CRM of this kind (MURST-ISS-A1 Antarctic Marine Sediment) is already available. The second phase focuses on the certification of antarctic krill, a small shrimp extremely abundant in the Southern Ocean. The total mass of krill available for this purpose is approximately 44 kg and results from the combination of three different catches (Ross Sea, Marguerite Bay and Livingston Island, respectively). The quantification of the following elements in the raw mass appears to be affordable by current analytical techniques, values being in the range of (in μg/g) 0.11–0.30 for As, 0.03–0.12 for Cd, 0.06–0.23 for Cr, 6.1–21 for Cu, 5.7–7.6 for Fe, 0.005–0.008 for Hg, 0.7–1.2 for Mn, 0.013– 0.077 for Ni, 0.04–0.57 for Pb and 12–16 for Zn. On the other hand, the average values ascertained in freeze-dried krill are as a rule one order of magnitude higher, i.e., (in μg/g), 3.2 for As, 0.6 for Cd, 1.8 for Cr, 75 for Cu, 61 for Fe, 0.025 for Hg, 4.6 for Mn, 0.7 for Ni, 2.1 for Pb and 81 for Zn. Information on the pretreatment of krill and details on the planned certification campaign are also given. Received: 10 June 1997 / Revised: 24 September 1997 / Accepted: 28 September 1997     

Simultaneous determination of rhenium,osmium and iridium in meteoritic samples by neutron activation analysis using simple and effective radiochemical procedures

Simple and effective procedures for the determination of Re, Os and Ir by radiochemical neutron activation analysis are presented. Those elements are separated individually by distillation (for Os) and anion exchange techniques (for Re and Ir) for a single specimen. Reproducibilities of the data obtained by the present procedures are evaluated by replicate analyses of the Allende meteorite sample, and are deduced to be 3% for Re, 6% for Os and 4% for Ir (1). Detection limits for the present procedures are calculated to be 1 ppb for Re, 20 ppb for Os and 5 ppb for Ir. These procedures were applied to Antarctic meteorites and proved to work very effectively for the determination of trace Re, Os and Ir in chondrite meteorites.     

An extension of the pairing theorem

An extended pairing scheme is presented which ensures the fulfillment of pairing conditions not only between the sets of occupied orbitals for spin α and for spin β, but also between their orthogonal complements, i.e., the sets of virtual orbitals for spin α and spin β, as well as between occupied orbitals for spin α and virtual orbitals for spin β and between virtual orbitals for spin α and occupied orbitals for spin β. It is shown that the extended pairing properties are suggested by some aspects of the construction of alternant molecular orbitals. The algorithm for singular value decomposition of rectangular matrices is proposed for use in practical implementations of the (extended) pairing scheme.     

Post-column oxidative derivatization for the liquid chromatographic determination of phenothiazines

A first post-column chemical derivatization method for the liquid chromatographic determination of phenothiazines is presented. Peroxyacetic acid is introduced as a derivatizing agent for phenothiazines, yielding the colored radical cations or fluorescent sulfoxides, depending on reaction conditions. Both reaction products were successfully employed for the detection of the phenothiazines after their liquid chromatographic separation. The fluorescence spectroscopic detection of the sulfoxides proved to be the more robust and sensitive method. Limits of detection ranged from 4 nM for triflupromazine and trimeprazine to 300 nM for phenothiazine for the fluorescence spectroscopic detection of the sulfoxide and from 0.3 μM for phenothiazine and triflupromazine to 2 μM for trifluperazine for the UV–Vis spectroscopic detection of the radical cation. The calibration functions for the fluorimetric sulfoxide determination ranged from two to more than three decades, starting at the limit of quantification.     

Heats of formation and kinetics of decomposition of nitroalkanes

Heats of formation of solid, liquid, and gaseous nitroalkanes have been shown mostly to obey group additivity. Group values have been obtained for carbon atoms attached to one, two, and three nitro groups. The heat of formation of 1,1,1,3,5,5,5,-heptanitropentane, either solid or liquid, cannot be fitted to the scheme, even allowing for gauche effects. The differences between observed and estimated values for 1,1,1-fluorodinitroalkanes and 1,2-dinitroethane are larger than expected and should be further investigated. Activation energies have been calculated for decomposition by five-center elimination of HONO from mononitro- and dinitroalkanes using thermochemistry and estimated activation energies for the reverse reactions. The key data for these estimates were previously reported activation energies for the decomposition of nitroethane and 1,2-dinitropropane. The calculations also gave values for the heats of formation (in kcal/mole) of nitroethylene 12.4, and 1-nitropropylene 5.6, and 2-nitropropylene 1.6. Activation energies were calculated for the competing unimolecular reaction, C? N bond fission, from thermochemistry and previously reported activation energies for the decomposition of 1,1- and 2,2-dinitropropane. Comparison of Arrhenius parameters for the two competing processes, namely, HONO and C? N bond fission, shows that, for the geminate dinitroethanes and dinitropropanes, C? N bond fission is faster about 370°K and, for the mononitroalkanes and for all the mononitroalkanes and dinitroalkanes, C? N bond fission is faster above 770°K.     

Atomic absorption spectrometric determination of calcium and other metallic elements in some animal protein sources

The phosphorus content of some animal protein sources was determined in order to identify the sample with the highest phosphorus content for use as a pilot sample. Varying concentrations of strontium and lanthanum were added to solutions of the ashed pilot sample for the determination of calcium and magnesium using flame atomic absorption spectrophotometry operated on the air-acetylene mode. At least 3000 ppm of strontium or lanthanum was required to completely overcome the interference of phosphate ion, PO(4)(3-), and give peak values for calcium. The presence of strontium or lanthanum did not affect the amount of magnesium obtained from the analyses. Based on this, a procedure is proposed and the results obtained by this procedure for calcium are more enhanced than those obtained without the addition of strontium or lanthanum for the same samples whereas comparable results were obtained for all other elements whether strontium or lanthanum was added or not. The method gives more accurate results and is reproducible. The coefficients of variation calculated using one of the samples were 0.58% for magnesium, 3.12% for zinc; 0.44% for calcium, 11.06% for lead, 22.22% for nickel, 3.53% for manganese and 3.50% for iron at the concentration levels found in that sample. Recoveries of spiked calcium, magnesium and zinc were quantitative. Also, for selected elements, results from the procedure compared well with those from chemical analysis.     

Electrokinetic phenomena at grafted polyelectrolyte layers

During the last decades the electrokinetic theory of Smoluchowski (Z. Phys. Chem. 92 (1918) 129) was extended to be applicable for soft surfaces (grafted polyelectrolyte layers (PL), biological and artificial membranes, etc.) by either using the Debye approximation or numerical solutions. In the theory of Ohshima (Colloids Surf. A 103 (1995) 249) the nonlinearized Poisson-Boltzmann (PB) equation for thick and uniform PL is solved analytically and a general hydrodynamic equation is derived in an integral form. These advantages in the theory of Ohshima provided a base for the further development of a generalized electrokinetic theory for soft surfaces. In his theory the final equation for the electroosmotic (electrophoretic) velocity is specified for the case of the complete dissociation of ionic sites within PL. Accordingly, the equation may be used only if the difference between pK and pH is very large. However, it turned out that an analytical solution of the nonlinearized PB equation for thick PL is possible for any degree of dissociation. This was achieved using the approximation of excluded coions if the absolute value of the reduced Donnan potential is larger than 2 and due to the simplification in the case of weak dissociation, when the absolute value of the reduced Donnan potential is less than 2. Combining this generalized double layer (DL) theory for PL and the theory of Ohshima enables to obtain an analytical equation for electroosmosis for the general case of any degree of dissociation. This equation creates for the first time a theoretical base for the interpretation of electrokinetic fingerprinting (EF) for the characterization of soft surfaces.     

Basic calculations about the limit of detection and its optimal determination

The limit of detection (LOD) is based strictly on an accepted probability for a false positive decision (type 1 error). For the needed standard deviation of the blank, a basic value for the calculation, three experimental different methods are described, which should be applicable in every case. Table values for simple but exact calculation, not only for single, but also for mean values, and with probabilities for the type 1 error of 1% and 5% are presented. Demands for an acceptable uncertainty of the LOD and for the validation of the result are specified.     

High-performance liquid chromatographic determination of hydrocortisone and methylprednisolone and their hemisuccinate esters in human serum

A high-performance liquid chromatographic method is described for the simultaneous determination of methylprednisolone (MP) and methylprednisolone hemisuccinate (MPHS), or hydrocortisone (HC) and hydrocortisone hemisuccinate (HCHS) in human serum. Reversed-phase liquid chromatography was performed on a microparticulate C18 column (Spherisorb, 5 micron) using a mobile phase of 2% glacial acetic acid, 30--35% acetonitrile, 70--65% water with ultraviolet detection (254 nm). The method uses 17 alpha-hydroxyprogesterone as the internal standard for the determination of methylprednisolone and its hemisuccinate ester, or 11-deoxy-17-hydroxycorticosterone as the internal standard for the determination of hydrocortisone and its hemisuccinate ester. The sensitivity is 0.03 microgram/ml for HC, 0.07 microgram/ml for MP, 0.04 microgram/ml for MPHS, and 0.10 microgram/ml for HCHS, with a detection limit of 0.02 microgram/ml for all four steroids. Calibration curves are linear up to 3 micrograms/ml for MP or MPHS (as equivalent MP) and up to 4 micrograms/ml for HC and 7 micrograms/ml (as equivalent HC) for HCHS. The pooled relative standard deviation for replicate for each steroid is less than 7%. Plasma concentration--time curves are reported for MP and MPHS or HC and HCHS of two human subjects following intramuscular administration of 125 mg of methylprednisolone sodium succinate for injection, U.S.P., or 250 mg of hydrocortisone sodium succinate for injection, U.S.P.     

High performance liquid chromatographic determination of theophylline metabolites in human liver microsomes

A high performance liquid chromatographic (HPLC) technique for the determination of three metabolites of theophylline, 3-methylxanthine (3-MX), 1-methylxanthine (1-MX) and 1,3-dimethyluric acid (1,3-DMU) in human liver microsomes is described. The analytes were extracted from human liver microsomes with methylene chloride/isopropanol and stepwise gradient elution was employed for the resolution of peaks. The limits of quantitation were 15 ng/mL for 3-MX, 20 ng/mL for 1-MX and 20 ng/mL for 1,3-DMU. The calibration range was linear for the three metabolites and the calibration ranges were 15-250 ng/mL for 3-MX, 20-250 ng/mL for 1-MX and 250-4000 ng/mL for 1,3-DMU. The absolute recovery ranged from 63-84% for 3-MX, 65-79% for 1-MX and 77-89% for 1,3-DMU over the calibration curve range. Accuracy for all three metabolites was within +/- 10% and adequate selectivity was demonstrated by the lack of interfering peaks in blank chromatograms. The within-run and interday precision were within 10% RSD for all three metabolites tested at two concentrations. The advantage of this method over previous methods is that the use of quaternary ammonium ion pair reagents in the mobile phase has been obviated. Also, unlike a previous radiometric HPLC method, the need for radiolabelled theophylline has also been eliminated. The method was used to characterize theophylline metabolism in human liver microsomes for immunoinhibition studies and to investigate the interaction of theophylline with selected quinolone antibiotics.     

傅里叶变换近红外光谱法同时定量分析水溶液中乙醇、果糖和葡萄糖

利用乙醇、果糖和葡萄糖在波数为14000-7500cm^-1范围内的吸收值,在近红外谱区用偏最小二乘法（PLS）对体系进行建模,并通过内部和外部样品校验确认最佳数据预处理方法。结果表明,乙醇在0.05-0.25L/L,果糖在0.01-0.05g/mL及葡萄糖在0.005-0.009g/mL的范围内外部校验模型较好的分别是在PLS中所用的一阶偏导（平滑点数是5）、二阶偏导（平滑点数是5）和直线消除法的数据预处理方法所建立的模型,其外部校验预测结果的相对误差在2%左右。此方法具有可同时测定不同样品,简便快速及成本低等优点。     

Dibenzomethanopentacene-Based Polymers of Intrinsic Microporosity for Use in Gas-Separation Membranes

Dibenzomethanopentacene (DBMP) is shown to be a useful structural component for making Polymers of Intrinsic Microporosity (PIMs) with promise for making efficient membranes for gas separations. DBMP-based monomers for PIMs are readily prepared using a Diels–Alder reaction between 2,3-dimethoxyanthracene and norbornadiene as the key synthetic step. Compared to date for the archetypal PIM-1, the incorporation of DBMP simultaneously enhances both gas permeability and the ideal selectivity for one gas over another. Hence, both ideal and mixed gas permeability data for DBMP-rich co-polymers and an amidoxime modified PIM are close to the current Robeson upper bounds, which define the state-of-the-art for the trade-off between permeability and selectivity, for several important gas pairs. Furthermore, long-term studies (over ≈3 years) reveal that the reduction in gas permeabilities on ageing is less for DBMP-containing PIMs relative to that for other high performing PIMs, which is an attractive property for the fabrication of membranes for efficient gas separations.     

Method validation for determination of 13 elements in honey samples by ICP-MS

A method for simultaneous ICP-MS determination of 13 elements in three types of honey from Poland is described. The method was validated, and the uncertainty budget was set up. The results obtained for the relative expanded uncertainties U _rel (k = 2) were 15.1% for Al, 18.6% for B, 18.8% for Ba, 7.9% for Ca, 24.4% for Cd, 7.24% for Cu, 7.9% for K, 4.8% for Mg, 8.3% for Mn, 12.7% for Na, 14.9% for Ni, 12.5% for Pb and 13.4% for Zn. Traceability of the measurement results was established based on the use of the corn flour CRM INCT-CF-3 and the apple leaves CRM SRM 1515 and by analyzing spiked samples. Recovery rates between 94% (Zn) and 107% (Na) were found. The detection limits of all elements studied showed the suitability of the procedure for routine analyses. Summarizing it can be concluded that the described analytical procedures to measure the mass fractions of 13 elements in honey samples with established traceability and evaluated uncertainty allow to obtain reliable and internationally comparable results.     

On-line process analysis and control in biotechnology

Measuring techniques can be developed and adapted for the characterization of bioreactors, for on-line process analysis and for the determination of biological parameters of cells during fermentation. Mathematical models can be formulated for bioreactors and cell regulation and a combined model for these can be reduced for use in process control. Microprocessors and minicomputers give further scope for data acquisition, model implementation and process control.