Synthesis of a Novel C2‐Symmetric Bis‐oxazoline (=Bis[4,5‐dihydrooxazole]) and Its Application as Chiral Ligand in Asymmetric Transition Metal Catalysis

The new C₂‐symmetric bis‐oxazoline (=bis[4,5‐dihydrooxazole]) 2 with a chiral trans‐(2R,3R)‐2,3‐bis(3,5‐diphenylphenyl)cyclopropylidene (=trans‐(2R,3R)‐2,3‐bis([1,1′: 3′,1″‐terphenyl]‐5′‐yl)cyclopropylidene) backbone was efficiently synthesized (Scheme). All synthetic steps were easy to perform and led to the desired product in good overall yields. Compound 2 was tested and compared as ligand in several enantioselective catalytic reactions such as palladium(0)‐catalyzed enantioselective allylic alkylations and copper(I)‐catalyzed enantioselective cyclopropanations and aziridinations.     

Theoretical Study on the Mechanism of Ni‐Catalyzed Alkyl–Alkyl Suzuki Cross‐Coupling

Ni‐catalyzed cross‐coupling of unactivated secondary alkyl halides with alkylboranes provides an efficient way to construct alkyl–alkyl bonds. The mechanism of this reaction with the Ni/ L1 ( L1 =trans‐N,N′‐dimethyl‐1,2‐cyclohexanediamine) system was examined for the first time by using theoretical calculations. The feasible mechanism was found to involve a Ni^I–Ni^III catalytic cycle with three main steps: transmetalation of [Ni^I( L1 )X] (X=Cl, Br) with 9‐borabicyclo[3.3.1]nonane (9‐BBN)R₁ to produce [Ni^I( L1 )(R₁)], oxidative addition of R₂X with [Ni^I( L1 )(R₁)] to produce [Ni^III( L1 )(R₁)(R₂)X] through a radical pathway, and C? C reductive elimination to generate the product and [Ni^I( L1 )X]. The transmetalation step is rate‐determining for both primary and secondary alkyl bromides. KOiBu decreases the activation barrier of the transmetalation step by forming a potassium alkyl boronate salt with alkyl borane. Tertiary alkyl halides are not reactive because the activation barrier of reductive elimination is too high (+34.7 kcal mol^?1). On the other hand, the cross‐coupling of alkyl chlorides can be catalyzed by Ni/ L2 ( L2 =trans‐N,N′‐dimethyl‐1,2‐diphenylethane‐1,2‐diamine) because the activation barrier of transmetalation with L2 is lower than that with L1 . Importantly, the Ni⁰–Ni^II catalytic cycle is not favored in the present systems because reductive elimination from both singlet and triplet [Ni^II( L1 )(R₁)(R₂)] is very difficult.     

Palladium‐Catalyzed Enantioselective Cacchi Reaction: Asymmetric Synthesis of Axially Chiral 2,3‐Disubstituted Indoles

We report herein the first examples of a palladium‐catalyzed enantioselective Cacchi reaction for the synthesis of indoles bearing a chiral C2‐aryl axis. In the presence of a catalytic amount of Pd(OAc)₂ and (R,R)‐QuinoxP* ligand, reaction of N‐aryl(alkyl)sulfonyl‐2‐alkynylanilides with arylboronic acids under oxygen atmosphere afforded enantioenriched 2,3‐disubstituted indoles in high yields and enantioselectivity. The indole ring is constructed de novo in this process and a complexation‐induced chirality transfer is proposed to account for the observed enantioselectivity.     

Sustainable Catalysis: Rational Pd Loading on MIL‐101Cr‐NH2 for More Efficient and Recyclable Suzuki–Miyaura Reactions

Palladium nanoparticles have been immobilized into an amino‐functionalized metal–organic framework (MOF), MIL‐101Cr‐NH₂, to form Pd@MIL‐101Cr‐NH₂. Four materials with different loadings of palladium have been prepared (denoted as 4‐, 8‐, 12‐, and 16 wt %Pd@MIL‐101Cr‐NH₂). The effects of catalyst loading and the size and distribution of the Pd nanoparticles on the catalytic performance have been studied. The catalysts were characterized by using scanning electron microscopy (SEM), transmission electron microscopy (TEM), Fourier‐transform infrared (FTIR) spectroscopy, powder X‐ray diffraction (PXRD), N₂‐sorption isotherms, elemental analysis, and thermogravimetric analysis (TGA). To better characterize the palladium nanoparticles and their distribution in MIL‐101Cr‐NH₂, electron tomography was employed to reconstruct the 3D volume of 8 wt %Pd@MIL‐101Cr‐NH₂ particles. The pair distribution functions (PDFs) of the samples were extracted from total scattering experiments using high‐energy X‐rays (60 keV). The catalytic activity of the four MOF materials with different loadings of palladium nanoparticles was studied in the Suzuki–Miyaura cross‐coupling reaction. The best catalytic performance was obtained with the MOF that contained 8 wt % palladium nanoparticles. The metallic palladium nanoparticles were homogeneously distributed, with an average size of 2.6 nm. Excellent yields were obtained for a wide scope of substrates under remarkably mild conditions (water, aerobic conditions, room temperature, catalyst loading as low as 0.15 mol %). The material can be recycled at least 10 times without alteration of its catalytic properties.     

Stereoselective Csp3−Csp2 Cross‐Couplings of Chiral Secondary Alkylzinc Reagents with Alkenyl and Aryl Halides

We report palladium‐catalyzed cross‐coupling reactions of chiral secondary non‐stabilized dialkylzinc reagents, prepared from readily available chiral secondary alkyl iodides, with alkenyl and aryl halides. This method provides α‐chiral alkenes and arenes with very high retention of configuration (dr up to 98:2) and satisfactory overall yields (up to 76 % for 3 reaction steps). The configurational stability of these chiral non‐stabilized dialkylzinc reagents was determined and exceeded several hours at 25 °C. DFT calculations were performed to rationalize the stereoretention during the catalytic cycle. Furthermore, the cross‐coupling reaction was applied in an efficient total synthesis of the sesquiterpenes (S)‐ and (R)‐curcumene with control of the absolute stereochemistry.     

Palladium‐catalysed Suzuki reaction of aryl chlorides in aqueous media using 1,3‐dialkylimidazolidin‐2‐ylidene ligands

A highly effective, easy to handle and environmentally benign process for palladium‐mediated Suzuki cross‐coupling is developed. The in situ prepared three‐component system Pd(OAc)₂–1,3‐bis(alkyl)imidazolinium chlorides (2a–f) and Cs₂CO₃ catalyses quantitatively the Suzuki cross‐coupling of deactivated aryl chlorides. Copyright © 2005 John Wiley & Sons, Ltd.     

A rhodium‐catalyzed route for oxidative coupling and cyclization of 2‐aminobenzyl alcohol with ketones leading to quinolines

2‐Aminobenzyl alcohol undergoes oxidative cyclization with aryl(alkyl), alkyl(alkyl) and cyclic ketones in dioxane at 80° in the presence of a catalytic amount of RhCl(PPh₃)₃ along with KOH to afford the corresponding quinolines in good yields. The catalytic pathway seems to be proceeded via a sequence involving initial oxidation of 2‐aminobenzyl alcohol to 2‐aminobenzaldehyde by a rhodium catalyst, cross aldol reaction between 2‐aminobenzaldehyde and ketones, and cyclodehydration.     

The Design and Synthesis of Novel 2,3‐Dihydrobenzo[f]isoquinolin‐4(1H)‐ones via Sequential Ugi–Heck Reactions by Using an Efficient Heterogeneous Palladium Nanocatalyst

A facile and efficient synthesis of N‐alkyl‐2‐(1, 2 dihydro‐1‐methylene‐4‐oxobenzo[f] isoquinoline‐3(4H)‐yl)‐2‐phenylacetamides is performed by the consecutive, two‐step procedure that consists of Ugi and Heck reactions. The Heck reaction was performed both by homogenous and a designed heterogeneous catalyst. The heterogeneous catalyst is a coordinated palladium to 1, 10‐phenanthroline attached to chitosan@Fe3O4 magnetite nanoparticles, which was shown to be more efficient than the homogenous Pd(OAc)₂/PPh₃ catalyst with good to excellent yields.     

Palladium‐Catalyzed Reductive Coupling Reaction of Terminal Alkynes with Aryl Iodides Utilizing Hafnocene Difluoride as a Hafnium Hydride Precursor Leading to trans‐Alkenes

Herein, we describe a reductive cross‐coupling of alkynes and aryl iodides by using a novel catalytic system composed of a catalytic amount of palladium dichloride and a promoter precursor, hafnocene difluoride (Cp₂HfF₂, Cp=cyclopentadienyl anion), in the presence of a mild reducing reagent, a hydrosilane, leading to a one‐pot preparation of trans‐alkenes. In this process, a series of coupling reactions efficiently proceeds through the following three steps: (i) an initial formation of hafnocene hydride from hafnocene difluoride and the hydrosilane, (ii) a subsequent hydrohafnation toward alkynes, and (iii) a final transmetalation of the alkenyl hafnium species to a palladium complex. This reductive coupling could be chemoselectively applied to the preparation of trans‐alkenes with various functional groups, such as an alkyl group, a halogen, an ester, a nitro group, a heterocycle, a boronic ester, and an internal alkyne.     

Dendron‐Functionalized Core–Shell Superparamagnetic Nanoparticles: Magnetically Recoverable and Reusable Catalysts for Suzuki C?C Cross‐Coupling Reactions

A metallodendron functionalized with dicyclohexyldiphosphino palladium complex was synthesized. The metallodendron was grafted onto core–shell superparamagnetic nanoparticles (γ‐Fe₂O₃/polymer, 200–500 nm) to give optimal catalytic reactivity in cross‐coupling reactions. The grafted nanoparticles were used as recoverable and reusable catalysts for Suzuki C? C cross‐coupling reactions. They showed remarkable reactivity towards iodo‐ and bromoarenes under mild conditions, and unprecedented reactivity towards chloroarenes. On completion of the catalytic reaction, the catalysts were readily recovered by using a simple magnet to attract the superparamagnetic grafted nanoparticles. Catalysts were recovered more than 25 times with almost no discernable loss of reactivity.     

Asymmetric hydration of alkenes catalyzed by wool‐palladium complex

A wool‐palladium complex has been found to be able to catalyze the asymmetric hydration of 1‐octene to (S)‐(+)‐2‐octanol and 1‐decene to (R)‐(+)‐2‐decanol under 1 atm N₂ and at 70°C. The optical yields were greatly affected by Pd content in wool‐palladium complex, reaction time and so on, when the proper conditions were selected, (S)‐(+)‐2‐octanol and (R)‐(+)‐2‐decanol could be obtained in 83.2 and 75.6%e.e. optical yield respectively. This chiral natural biopolymer‐palladium complex catalyst was very easy to prepare and could be reused several times without appreciable change in catalytic activity. Copyright © 2004 John Wiley & Sons, Ltd.     

Synthesis of core‐crosslinked carbosilane block copolymer micelles and their thermal transformation to silicon‐based ceramics nanoparticles

Carbosilane fine particles were synthesized by core‐crosslinking of carbosilane block copolymer micelles and they were pyrolytically transformed into silica nanoparticles. The carbosilane block copolymer, poly(1‐(3‐butenyl)‐1‐methylsilacyclobutane)‐block‐polystyrene, (polyBMSB‐b‐polySt), [(m, n) = (31, 16), (54, 30), and (75, 28)], was synthesized by anionic polymerization of BMSB and St, where m and n represent polymerization degrees of BMSB and St segments, respectively. The block copolymer formed micelles in N,N‐dimethylformamide (DMF). The hydrodynamic diameters (D_h) of the micelles evaluated by dynamic light scattering ranged from 40 to 158 nm depending on the copolymer molecular weight. The core of the micelle was cross‐linked by Pt‐catalyzed hydrosilation with 1,2‐bis(dimethylsilylethane). The D_h of the core‐cross‐linked micelles in THF ranged from 56 to 164 nm. These precursor particles were pyrolyzed at 850 °C under N₂ to give ceramic nanoparticles. The diameters of the spherical ceramic particles estimated by AFM ranged from 25 to 60 nm. X‐ray fluorescence analysis of the ceramic products revealed that it consisted of mainly SiO₂ rather than SiC. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 3778–3787, 2005     

Encapsulation of nanomaterials using an intermediary layer cross‐linkable ABC triblock copolymer

For the preparation of core‐shell nanoparticles containing functional nanomaterials, a photo‐cross‐linkable amphiphilic ABC triblock copolymer, poly(ethylene glycol)‐b‐poly(2‐cinnamoyloxyethyl methacrylate)‐b‐poly(methyl methacrylate) (PEG‐PCEMA‐PMMA), was synthesized. This triblock copolymer was then used to encapsulate Au nanoparticles or pyrene. The triblock copolymer of PEG‐b‐poly(2‐hydroxyethyl methacrylate)‐b‐PMMA (PEG‐PHEMA‐PMMA) (M_n = 15,800 g/mol, M_w/M_n = 1.58) was first synthesized by activators generated by electron transfer atom transfer radical polymerization. Its middle block was then functionalized with cinnamoyl chloride. The degrees of polymerization of the PEG, PHEMA, and PMMA blocks were 45, 13, and 98, respectively. PMMA‐tethered Au nanoparticles (with an average diameter of 3.0 nm) or pyrene was successfully encapsulated within the PEG‐PCEMA‐PMMA micelles. The intermediary layers of the micelles were then cross‐linked by UV irradiation. The spherical structures of the PEG‐PCEMA‐PMMA micelles containing Au nanoparticles or pyrene were not changed by the photo‐cross‐linking process and they showed excellent colloidal stability. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 4963–4970, 2009     

Carboxymethylcellulose‐supported palladium nanoparticles generated in situ from palladium(II) carboxymethylcellulose as an efficient and reusable catalyst for ligand‐ and base‐free Heck–Matsuda and Suzuki–Miyaura couplings

A novel palladium(II) carboxymethylcellulose (CMC‐Pd^II) was prepared by direct metathesis from sodium carboxymethylcellulose and PdCl₂ in aqueous solution. Its catalytic activities were explored for Heck–Matsuda reactions of aryldiazonium tetrafluoroborate with olefins, and Suzuki–Miyaura couplings of aryldiazonium tetrafluoroborate with arylboronic acid. Both reactions proceeded at room temperature in water or aqueous ethanol media without the presence of any ligand or base, to provide the corresponding cross‐coupling products in good to excellent yields under atmospheric conditions. The CMC‐Pd^II and carboxymethylcellulose‐supported palladium nanoparticles (CMC‐Pd⁰) formed in situ in the reactions were characterized using Fourier transform infrared spectroscopy, X‐ray diffraction, inductively coupled plasma atomic emission spectrometry, and scanning and transmission electron microscopies. The homogeneous nature of the CMC‐Pd⁰ catalyst was confirmed via Hg(0) and CS₂ poisoning tests. Moreover, the CMC‐Pd⁰ catalyst could be conveniently recovered by simple filtration and reused for at least ten cycles in Suzuki–Miyaura reactions without apparently losing its catalytic activity. The catalytic system not only overcomes the basic drawbacks of homogeneous catalyst recovery and reuse but also avoids the need to fabricate palladium nanoparticles in advance. Copyright © 2015 John Wiley & Sons, Ltd.     

Orthopalladated complexes of phosphorus ylide: Poly(N‐vinyl‐2‐pyrrolidone)‐stabilized palladium nanoparticles as reusable heterogeneous catalyst for Suzuki and Heck cross‐coupling reactions

The phosphorus ylide [Ph₃PCHC(O)C₆H₄‐NO₂–4] reacted with Pd(OAc)₂ to give the C,C‐orthometallated complex [Pd{κ²(C,C)‐C₆H₄PPh₂C(H)CO(C₆H₄‐NO₂–4)}(μ‐OAc)]₂, which underwent bridge exchange reaction with NaN₃, NaCl, KBr and KI, respectively, to afford the binuclear C,C‐orthopalladated complexes [Pd{κ²(C,C)‐C₆H₄PPh₂C(H)CO(C₆H₄‐NO₂–4)}(μ‐X)]₂ (X = N₃ ( 1 ), Cl ( 2 ), Br ( 3 ) and I ( 4 )). The complexes were identified using spectroscopy (infrared and NMR), CHNS technique and single‐crystal X‐ray structure analysis. Thereafter, palladium nanoparticles with narrow size distribution were easily prepared using the refluxing reaction of iodo‐bridged orthopalladated complex 4 with poly(N ‐vinyl‐2‐pyrrolidone) (PVP) as the protecting group. The PVP‐stabilized palladium nanoparticles were characterized using a variety of techniques including X‐ray diffraction, transmission and scanning electron microscopies, energy‐dispersive X‐ray spectroscopy, inductively coupled plasma analysis and Fourier transform infrared spectroscopy. The catalytic activity of the PVP‐stabilized palladium nanoparticles was evaluated in the Suzuki reaction of phenylboronic acid and the Heck reaction of styrene with aryl halides of varying electron densities. This catalyst exhibited excellent catalytic activity for Suzuki cross‐coupling reactions in ethanol–water. Notably, aryl chlorides which are cheaper and more accessible than their bromide and iodide counterparts also reacted satisfactorily using this catalyst. After completion of reactions, the catalyst could be separated using a simple method and used many times in repeat cycles without considerable loss in its activity.     

P‐Aminophosphaalkenes with C‐Isopropyldimethylsilyl Groups

Amination of the C‐isopropyldimethylsilyl P‐chlorophosphaalkene (iPrMe₂Si)₂C=PCl ( 1 ) leads to the P‐aminophosphaalkenes (iPrMe₂Si)₂C=PN(R)R′ (R, R′ = Me ( 2 ), R = H, R′ = nPr ( 3 ), R = H, R′ = iPr ( 4 ), R = H, R′ = tBu ( 5 ), R = H, R′ = 1‐Ada ( 6 ), R = H, R′ = CPh₃ ( 7 ), R = H, R′ = Ph ( 8 ), R = H, RR′ = 2,6‐iPr₂Ph (= DIP) ( 10 ), R = H, R′ = 2,4,6‐Me₃Ph (= Mes) ( 11 ), R = H, R′ = 2,4,6‐tBu₃Ph (= Mes*)] ( 12 ), R = H, R′ = SiMe₃ ( 13 ), and R, R′ = SiMe₂Ph (1 4 ). ³¹P‐NMR spectra confirm that phosphaalkenes 2 – 7 and 10 – 14 are monomeric in solution; the structures of 7 , 10 , and 12 were determined by X‐ray crystallography. Freshly prepared (iPrMe₂Si)₂C=PN(H)Ph ( 8 ) is a monomer that dimerizes with (N→C) proton migration within several hours to the stable diazadiphosphetidine [(iPrMe₂Si)₂CHPNPh]₂ ( 9 ). NMR‐scale reactions of deprotonated 5 and 13 with tBuiPrPCl provide by P–P bond formation the P‐phosphanyl iminophosphoranes [(iPrMe₂Si)₂C=](RN=)PPtBu(iPr) [R = tBu ( 15 ), R = Me₃Si ( 17 )]. Deprotonated 5 and Me₃GeCl deliver by N–Ge bond formation the aminophosphaalkene (iPrMe₂Si)₂C=PN(tBu)GeMe₃ ( 20 ), which with elemental selenium 5 undergoes (N→C) proton migration to form the alkyl(imino)(seleno)phosphorane [(iPrMe₂Si)₂CH](tBuN=)P=Se ( 21 ), which is a selenium‐bridged cyclic dimer in the solid state.     

Palladium nanoparticles immobilized on amphiphilic and hyperbranched polymer‐functionalized magnetic nanoparticles: An efficient semi‐heterogeneous catalyst for Heck reaction

To address the obstacles facing the use of palladium‐based homogeneous and heterogeneous catalysts in C─C cross‐coupling reactions, a novel semi‐heterogeneous support was developed based on hyperbranched poly(ethylene glycol)‐block ‐poly(citric acid)‐functionalized Fe₃O₄ magnetic nanoparticles (Fe₃O₄@PCA‐b ‐PEG). Because of the surface modification of the Fe₃O₄ nanoparticles with amphiphilic and hyperbranched polymers (PCA‐b ‐PEG), these hybrid materials are not only soluble in a wide range of solvents (e.g. water, ethanol and dimethylformamide) but also are able to trap Pd²⁺ ions via complex formation of free carboxyl groups of the PCA dendrimer with metal ions. The reduction of trapped palladium ions in the dendritic shell of Fe₃O₄@PCA‐b ‐PEG leads to immobilized palladium nanoparticles. The morphology and structural features of the catalyst were characterized using various microscopic and spectroscopic techniques. The catalyst was effectively used in the palladium‐catalysed Mizoroki–Heck coupling reaction in water as a green solvent. In addition, the catalyst can be easily recovered from the reaction mixture by applying an external magnetic field and reused for more than ten consecutive cycles without much loss in activity, exhibiting an example of a sustainable and green methodology.     

Palladium chloride anchored on organic functionalized MCM‐41 as a catalyst for the Heck reaction

Palladium chloride was grafted to amino‐functionalized MCM‐41 to prepare heterogeneous catalysts. XRD, N₂ adsorption–desorption isotherms, IR, ¹³C and ²⁹Si cross‐polarization magic‐angle spinning NMR spectroscopy and XPS techniques were employed to characterize the catalytic materials. The heterogeneous palladium catalyst exhibited excellent catalytic activity for the Heck vinylation of iodobenzene with methyl acrylate, giving 92% yield of methyl cinnamate in the presence of N‐methylpyrrolidone (NMP) and triethylamine (Et₃N). The stability of the heterogeneous catalyst was also studied in detail. The catalytic tests showed that the palladium leaching correlated to solvent, base and palladium loading. The heterogeneous catalyst exhibited excellent stability towards loss of activity and palladium leaching was not observed during six recycles in the presence of toluene and Na₂CO₃. Copyright © 2007 John Wiley & Sons, Ltd.     

N‐Heterocyclic Carbenes and Imidazole‐2‐thiones as Ligands for the Gold(I)‐Catalysed Hydroamination of Phenylacetylene

Gold(I) complexes of 1‐[1‐(2,6‐dimethylphenylimino)alkyl]‐3‐(mesityl)imidazol‐2‐ylidene (C^Imine_R), 1,3‐dimesitylimidazol‐2‐ylidene (IMes) and of the corresponding thione derivatives (S^Imine_R and IMesS) were prepared and structurally characterised. The solid‐state structure of the C^Imine_R and S^Imine_R gold(I) complexes showed monodentate coordination of the ligand and a dangling imine group that could bind reversibly to the metal centre to stabilise otherwise unstable catalytic intermediates. Interestingly, reaction of C^Imine_tBu with [AuCl(SMe₂)] led to the formation of [(C^Imine_tBu)AuCl], which rearranges upon crystallisation into the unusual complex cation [(C^Imine_tBu)₂Au]⁺, with AuCl₂^? as the counterion. The activity of the gold complexes in the hydroamination of phenylacetylene with substituted anilines was tested and compared to control catalyst systems. The best catalytic performance was obtained with [(C^Imine_tBu)AuCl], with the exclusive formation of the Markovnikov addition product in excellent yield (>95 %) regardless of the substituents on aniline.     

Conformational change induced by hydration: trans‐dichloro­bis­[(1R,2R,3R,5S)‐(–)‐isopinocampheylamine]palladium(II) and trans‐dichloro­bis[(1S,2S,3S,5R)‐(+)‐isopinocampheylamine]palladium(II) hemihydrate

The title compounds, trans‐dichloro­bis[(1R,2R,3R,5S)‐(−)‐2,6,6‐trimethyl­bicyclo­[3.1.1]heptan‐3‐amine]palladium(II), [PdCl₂(C₁₀H₁₉N)₂], and trans‐dichloro­bis[(1S,2S,3S,5R)‐(+)‐2,6,6‐trimethyl­bicyclo­[3.1.1]heptan‐3‐amine]palladium(II) hemihydrate, [PdCl₂(C₁₀H₁₉N)₂]·0.5H₂O, present different arrangements of the amine ligands coordinated to Pd^II, viz. antiperiplanar in the former case and (−)anticlinal in the latter. The hemihydrate is an inclusion compound, with a Pd coordination complex and disordered water mol­ecules residing on crystallographic twofold axes. The crystal structure for the hemihydrate includes a short Pd⋯Pd separation of 3.4133 (13) Å.