On flow of a fourth‐grade fluid with heat transfer

The influence of heat transfer on the steady flow of a fourth‐grade fluid between two stationary parallel porous plates is studied. The flow is engendered under the application of a constant pressure gradient. The concept of homotopy analysis method is utilized for the series solution of the governing problem. Numerical solution has been also carried out. In addition, both analytic and numerical solutions are compared. The variations of embedded parameters into the solution are predicted through the graphical representations. Copyright © 2010 John Wiley & Sons, Ltd.     

Bending of thick plates with a concentrated load

In this paper, according to the simplified theory of [1], the bending of rectangular plates with two opposite edges simply supported and other two opposite edges being arbitrary under the action of a concentrated load is treated by means of properties of two-variable-function and the method of series^[2]. The effect of transverse shearing forces on the bending of plates is considered. When the thickness h of plates is small, and the term, whose orders are more than order of h² are neglected, then the results agree with the solutions corresponding to the problem of thin plates^[3]. At the end, the solutions of the bending problem of plates with arbitrary linear distributed load are also obtained.     

正交各向异性层状弹性半平面动力奇异解及其应用

本文采用Ｌａｐｌａｃｅ－Ｆｏｕｒｉｅｒ联合变换及传递矩阵方法导出了正交各向异性层状弹性半平面动力问题的时域奇异解的解析表达式，讨论了奇异解的数值实施。并把奇异解应用于边界元，计算了地下直墙拱结构的动力响应问题。     

Slip effects on the peristaltic flow of a Jeffrey fluid in an asymmetric channel under the effect of induced magnetic field

In the present study, we investigated the effects of slip and induced magnetic field on the peristaltic flow of a Jeffrey fluid in an asymmetric channel. The governing two‐dimensional equations for momentum, magnetic force function and energy are simplified by using the assumptions of long wavelength and low but finite Reynolds number. The reduced problem has been solved by Adomian decomposition method (ADM) and closed form solutions have been presented. Further, the exact solution of the proposed problem has also been computed and the mathematical comparison shows that both solutions are almost similar. The effects of pertinent parameters on the pressure rise per wavelength are investigated using numerical integration. The expressions for pressure rise, friction force, velocity, temperature, magnetic force function and the stream lines against various physical parameters of interest are shown graphically. Moreover, the behavior of different kinds of wave shape are also discussed. Copyright © 2009 John Wiley & Sons, Ltd.     

Similarity solution of thermal boundary layers for laminar narrow axisymmetric jets

In this work, the similarity equation describing the thermal boundary layers of laminar narrow axisymmetric jets is derived based on boundary layer assumptions. The equation is solved exactly. Some properties of the thermal jet are discussed. By introducing new-defined non-dimensional coordinates, the similarity solution results in a “universal” format. The results can also be applied in the boundary layer problem of species diffusion.     

The existence problem of optimal control for nonlinear processes

The existence problem of optimal control systemsdescribed by z=f(t,x.u)is discussed in this paper,where f(f,x,u)is a more general function and theclass of admissible control functions are generalenough to contain those control functions which arefrequently used in engineering.The problem for anoptimal control approximated by a sequence of controlfunctions being part of certain function classes isconsidered here,an example in contradiction with theconclusion of ref.[1]about this problem is given,and a correct conclusion is presented.     

Peristaltic transport and heat transfer of a MHD Newtonian fluid with variable viscosity

The influence of temperature‐dependent viscosity and magnetic field on the peristaltic flow of an incompressible, viscous Newtonian fluid is investigated. The governing equations are derived under the assumptions of long wavelength approximation. A regular perturbation expansion method is used to obtain the analytical solutions for the velocity and temperature fields. The expressions for the pressure rise, friction force and the relation between the flow rate and pressure gradient are obtain. In addition to analytical solutions, numerical results are also computed and compared with the analytical results with good agreement. The results are plotted for different values of variable viscosity parameter β, Hartmann number M, and amplitude ratio ?. It is found that the pressure rise decreases as the viscosity parameter β increases and it increases as the Hartmann number M increases. Finally, the maximum pressure rise (σ=0) increases as M increases and β decreases. Copyright © 2009 John Wiley & Sons, Ltd.     

Slip effects and heat transfer analysis in a viscous fluid over an oscillatory stretching surface

In this study, we investigate the heat transfer problem in a viscous fluid over an oscillatory infinite sheet with slip condition. The sheet is moved back and forth in its own plane. The derived problem involves a dimensionless parameter indicating the relative magnitude of frequency to sheet stretching rate. A system of non‐linear partial differential equations is solved numerically using the finite‐difference scheme, in which a coordinate transformation is employed to transform the semi‐infinite physical space to a bounded computational domain. The physical features of interesting parameters on the velocity and temperature distributions are shown graphically and discussed. The values of the skin‐friction coefficient and the local Nusselt number are given in tabular form. Copyright © 2008 John Wiley & Sons, Ltd.     

One-dimensional non-Darcy flow in a semi-infinite porous media: a multiphase implicit Stefan problem with phases divided by hydraulic gradients

One-dimensional non-Darcy flow in a semi-infinite porous media is investigated. We indicate that the non-Darcy relation which is usually determined from exper-imental results can always be described by a piecewise linear function,and the problem can be equivalently transformed to a multiphase implicit Stefan problem.The novel feature of this Stefan problem is that the phases of the porous media are divided by hydraulic gradients,not the excess pore water pressures.Using the similarity transformation technique,an exact solution for the situation that the external load increases in proportion to the square root of time is developed. The study on the existence and uniqueness of the solution leads to the requirement of a group of inequalities.A similar Ste-fan problem considering constant surface seepage velocity is also investigated, and the solution, which we indicate to be uniquely existent under all conditions,is established. Meanwhile,the relation between our Stefan problem and the traditional multiphase Stefan problem is demonstrated.In the end,computational examples of the solution are presented and discussed.The solution provides a useful benchmark for verifying the accuracy of general approximate algorithms of Stefan problems, and it is also attractive in the context of inverse problem analysis.     

ANALYTICAL SOLUTIONS TO STRESS CONCENTRATION PROBLEM IN PLATES CONTAINING RECTANGULAR HOLE UNDER BIAXIAL TENSIONS

The stress concentration problem in structures with a circular or elliptic hole can be investigated by analytical methods. For the problem with a rectangular hole, only approximate results are derived. This paper deduces the analytical solutions to the stress concentration problem in plates with a rectangular hole under biaxial tensions. By using the U-transformation technique and the finite element method, the analytical displacement solutions of the finite element equations are derived in the series form. Therefore, the stress concentration can then be discussed easily and conveniently. For plate problem the bilinear rectangular element with four nodes is taken as an example to demonstrate the applicability of the proposed method. The stress concentration factors for various ratios of height to width of the hole are obtained.     

Heat and mass transfer in stagnation-point flow towards a stretching surface in the presence of buoyancy force and thermal radiation

In this paper an analysis has been made to study heat and mass transfer in two-dimensional stagnation-point flow of an incompressible viscous fluid over a stretching vertical sheet in the presence of buoyancy force and thermal radiation. The similarity solution is used to transform the problem under consideration into a boundary value problem of nonlinear coupled ordinary differential equations containing Prandtl number, Schmidt number and Sherwood number which are solved numerically with appropriate boundary conditions for various values of the dimensionless parameters. Comparison of the present numerical results are found to be in excellent with the earlier published results under limiting cases. The effects of various physical parameters on the boundary layer velocity, temperature and concentration profiles are discussed in detail for both the cases of assisting and opposing flows. The computed values of the skin friction coefficient, local Nusselt number and Sherwood number are discussed for various values of physical parameters. The tabulated results show that the effect of radiation is to increase skin friction coefficient, local Nusselt number and Sherwood number.     

Non-linear analysis of functionally graded circular plates under asymmetric transverse loading

Based on the first-order shear deformation plate theory with von Karman non-linearity, the non-linear axisymmetric and asymmetric behavior of functionally graded circular plates under transverse mechanical loading are investigated. Introducing a stress function and a potential function, the governing equations are uncoupled to form equations describing the interior and edge-zone problems of FG plates. This uncoupling is then used to conveniently present an analytical solution for the non-linear asymmetric deformation of an FG circular plate. A perturbation technique, in conjunction with Fourier series method to model the problem asymmetries, is used to obtain the solution for various clamped and simply supported boundary conditions. The material properties are graded through the plate thickness according to a power-law distribution of the volume fraction of the constituents. The results are verified by comparison with the existing results in the literature. The effects of non-linearity, material properties, boundary conditions, and boundary-layer phenomena on various response quantities in a solid circular plate are studied and discussed. It is found that linear analysis is inadequate for analysis of simply supported FG plates which are immovable in radial direction even in the small deflection range. Furthermore, the responses of FG materials under a positive load and a negative load of identical magnitude are not the same. It is observed that the boundary-layer width is approximately equal to the plate thickness with the boundary-layer effect in clamped FG plates being stronger than that in simply supported plates.     

Unsteady shrinking sheet with mass transfer in a rotating fluid

In this paper, the problem of unsteady flow induced by a shrinking sheet with mass transfer in a rotating fluid is studied. The transformed boundary layer equations are solved numerically by an implicit finite‐difference scheme known as the Keller‐box method. The influence of rotation, unsteadiness and mass suction parameters on the reduced skin friction coefficients f″(0) and g′(0), as well as the lateral velocity and velocity profiles are presented and discussed in detail. Copyright © 2010 John Wiley & Sons, Ltd.     

Exact solutions of incompressible Couette flow with porous walls for slightly rarefied gases

In this work, the transient incompressible Couette flow and steady-state temperature profiles between two porous parallel plates for slightly rarefied gases are solved exactly. The first-order approximation of slip velocity at the boundaries is used in the formulation. The solution is also applicable for Couette flow in micro-channels under certain circumstances. The influences of mass transfer and a nondimensional slip parameter on slip velocities are discussed. It is also found that the transient slip velocities at the walls are greatly different from the steady-state velocity slips. The influences of velocity slip and temperature slip parameters on the temperature distribution and heat transfer at the walls are analyzed and discussed. It is shown that the slip parameters can greatly change the temperature profiles and heat transfer characteristics at the walls.     

Some discussions on finite deformation of continuous media

Three problems are discussed in this paper:1.The physical significance of the characteristic tensorθ~ii of finitedeformation is discussed as a complement to the literature.2.The four characterietic tensors of finite deformation,introduced inthe.literature,ard analyzed and discussed more thoroughly.3.The representation of the general finite deformation through simple.loading process is not always possible,the condition for its realization beingthat the given finite deformation satisfies the equations of compatibility.It is pointed out in this paper that for the finite deformation set forth byL.I.Sedov in an illustrative example in[9],the equations of compatibilitycannot be satisfied even for k=1,henceforth for whatever value of k,thefinite deformation set forth by Sedov can not be represented through simpleloading process.     

MHD stagnation-point flow and heat transfer towards stretching sheet with induced magnetic field

The problem of the steady magnetohydrodynamic (MHD) stagnation-point flow of an incompressible viscous fluid over a stretching sheet is studied. The effect of an induced magnetic field is taken into account. The nonlinear partial differential equations are transformed into ordinary differential equations via the similarity transformation. The transformed boundary layer equations are solved numerically using the shooting method. Numerical results are obtained for various magnetic parameters and Prandtl numbers. The effects of the induced magnetic field on the skin friction coefficient, the local Nusselt number, the velocity, and the temperature profiles are presented graphically and discussed in detail.     

Time-dependent three-dimensional flow and mass transfer of elastico-viscous fluid over unsteady stretching sheet

This article studies the three-dimensional boundary layer flow of an elasticoviscous luid over a stretching surface. Velocity of the stretching sheet is assumed to be ime-dependent. Effect of mass transfer with higher order chemical reaction is further onsidered. Computations are made by the homptopy analysis method (HAM). Convergence f the obtained series solutions is explicitly analyzed. Variations of embedding arameters on the velocity and concentration are graphically discussed. Numerical computations f surface mass transfer are reported. Comparison of the present results with he numerical solutions is also given.     

Time-dependent three-dimensional flow and mass transfer of elastico-viscous fluid over unsteady stretching sheet

This article studies the three-dimensional boundary layer flow of an elasticoviscous fluid over a stretching surface. Velocity of the stretching sheet is assumed to be time-dependent. Effect of mass transfer with higher order chemical reaction is further considered. Computations are made by the homptopy analysis method (HAM). Convergence of the obtained series solutions is explicitly analyzed. Variations of embedding parameters on the velocity and concentration are graphically discussed. Numerical computations of surface mass transfer are reported. Comparison of the present results with the numerical solutions is also given.     

Flow of a micropolar fluid due to a porous stretching sheet and heat transfer

The present work investigates the micropolar fluid flow due to a permeable stretching sheet and the resulting heat transfer. Unlike the existing numerical works on the flow phenomenon in the literature, the prime interest here is to analytically work out shape of the solutions and identify whether they are unique. Indeed, unique solutions are detected and presented in the exact formulas for the associated boundary layer equations. Temperature field influenced by the microrotation is also mathematically resolved in the cases of constant wall temperature, constant heat flux and Newtonian heating. To discover the salient physical features of many mechanisms acting on the considered problem, it is adequate to have the analytical velocity and temperature fields and also closed-form skin friction/couple stress/heat transfer coefficients, all as given in the current paper. For instance, the practically significant rate of heat transfer is represented by a single formula valid for all three temperature cases.     

层状弹性半空间轴对称动力问题的奇异解

本文利用Laplace-Hankel联合变换及传播矩阵技术导出了任意层数的层状弹性半空间轴对称动力问题时域奇异解的一般解析表达式,并给出了奇异解数值化实施的计算方法。文末的实例计算表明了本文给出解答的正确性以及数值化实施的可靠性,从而为进一步用边界元法直接解决由于层状介质而引起的非匀质动力问题开拓了一条潜在的途径。