Voltammetric Behavior of Antileukemia Drug Glivec. Part I – Electrochemical Study of Glivec

The electrochemical behavior of the antileukemia drug glivec was investigated at a glassy carbon electrode (GCE). The oxidation is a complex, pH‐dependent, irreversible electrode process involving the transfer of 2 electrons and 2 protons and the formation of an electroactive product, P_glivec, which strongly adsorbs on the GCE surface and undergoes reversible oxidation. The adsorption of P_glivec at the GCE surface yields a compact monolayer that inhibits further oxidation of glivec. The electrochemical reduction is a simple pH dependent irreversible process involving the transfer of 2 electrons and 2 protons and occurs with the formation of a nonelectroactive product. The diffusion coefficient of glivec was calculated to be D_O=7.35×10^?6 cm² s^?1 in pH 4.5 0.1 M acetate buffer.     

Electrochemical Behavior of Thalidomide at a Glassy Carbon Electrode

Thalidomide is an oral drug marketed in the 1950s as a sedative and an anti‐emetic during pregnancy that was removed from the market when its teratogenic side effects appeared in new born children due to inadequate tests to assess the drug's safety. Recent studies evaluating the use of thalidomide in cancer and HIV diseases have sparked renewed interest. The electrochemical behavior of thalidomide on a glassy carbon electrode has been investigated using cyclic, differential and square‐wave voltammetry in aqueous media at different pHs. The oxidation mechanism of thalidomide is an irreversible, adsorption‐controlled process, pH dependent up to values close to the pK_a and occurs in two consecutive charge transfer reactions. A mechanism of oxidation of thalidomide involving one electron and one proton to produce a cation radical, which reacts with water and yields a final hydroxylated product is proposed. The reduction of thalidomide is also a pH dependent, irreversible process and occurs in a single step, with the same number of electrons and protons transferred. The reduction mechanism involves the protonation of the nitrogen that bridges the two cyclic groups, and the product of the protonation reaction causes irreversible dissociation. Both thalidomide and the non electroactive oxidation and reduction products are strongly adsorbed on the glassy carbon electrode surface.     

Electrochemical Behaviour of Isoflavones Genistein and Biochanin A at a Glassy Carbon Electrode

The electrochemical behaviour of genistein and biochanin A was studied at a glassy carbon electrode by cyclic, differential pulse and square wave voltammetry. Genistein undergoes three irreversible, pH dependent oxidation reactions with the transfer of one electron and one proton from each hydroxyl group. The formation of two electroactive products that undergo reversible redox reactions was observed. Biochanin A undergoes two irreversible, pH dependent reactions due to the oxidation of the two hydroxyl groups. The electrochemical behaviour of the chemical analogue daidzein was also investigated. The electroactive centres of genistein and biochanin A were identified and their oxidation mechanisms discussed.     

Anodic Behaviour of Flavonoids Orientin,Eriodictyol and Robinin at a Glassy Carbon Electrode

Orientin, eriodictyol and robinin are polyphenolic compounds, and their oxidation mechanism is pH‐dependent, in two steps, involving a different number of electrons and protons. Orientin and eriodictyol first oxidation occurs at a lower potential, corresponding to the reversible oxidation of the catechol group, and is followed by an irreversible oxidation on the ring‐A at more positive potential. Robenin oxidation is irreversible, with the formation of electroactive products, and occurs at ring‐A and ring‐B. The electrochemical characterization of their redox behaviour brought useful data about their chemical stability, antioxidant and pro‐oxidant activity, enabling a comprehensive understanding of their redox mechanism.     

Electrochemical Redox Behavior of Omeprazole Using a Glassy Carbon Electrode

The electrochemical redox behavior of omeprazole (OMZ), a gastric acid pump inhibitor, was investigated at a glassy carbon electrode using cyclic, differential pulse and square‐wave voltammetry over a wide pH range. The pH‐dependent oxidation occurs in two irreversible consecutive charge transfer reactions. Adsorption of the nonelectroactive product was also observed. The first oxidation involves removal of one electron, followed by deprotonation and leads to the formation of a hydroxylated species. The second oxidation process is related to the hydroxyl and amino groups in the benzimidazole moiety. The reduction is irreversible, also pH‐dependent, and occurs in a single step at the sulfoxide group in a diffusion‐controlled mechanism. The diffusion coefficient of omeprazole was calculated to be D_OMZ=2.31×10^?6 cm² s^?1.     

Electrochemical Redox Behaviour of Temozolomide Using a Glassy Carbon Electrode

The electrochemical behaviour of temozolomide on a glassy carbon electrode has been investigated. The reduction of temozolomide is an irreversible process, pH dependent, and the mechanism involves the addition of one electron and one proton to C5 to form an anion radical, causing the irreversible breakdown of the tetrazinone ring. The oxidation mechanism of temozolomide is an irreversible, adsorption‐controlled process, pH dependent up to value close to the pK_a and occurs in two consecutive charge transfer reactions, with the formation of the hydroxylated product. The electroanalytical determination of TMZ led to a detection limit of 1.1 µM.     

Electrochemical Oxidation of Sulfasalazine at a Glassy Carbon Electrode

Sulfasalazine (SSZ) is a pharmaceutical compound used for the treatment of rheumatoid arthritis. The electrochemical oxidation of SSZ at a glassy carbon electrode was studied by cyclic, differential pulse and square wave voltammetry in a wide pH range. For electrolytes with pH<11.0, the oxidation is an irreversible, diffusion‐control, pH‐dependent process that involves the transfer of one electron and one proton from the hydroxyl group of the salicylic moiety. For pH>11.0 the oxidation is pH‐independent, and a pK_a≈11 was determined. The formation of a quinone‐like oxidation product that undergoes two electrons and two protons reversible redox reaction was observed. Also, UV‐vis spectra of SSZ were recorded as a function of supporting electrolytes pH. An electrochemical oxidation mechanism was proposed.     

Oxidation Mechanism of Fluorescein at Glassy Carbon Electrode

This study investigates redox properties of fluorescein (FLSC), a fluorescent tracer with many applications in several areas, markedly in biochemical research and health care diagnosis, on glassy carbon electrode (GCE) at a wide interval of pH by using voltammetric techniques. Three peaks were observed at different potentials. The investigation revealed that FLSC is irreversibly electroxidized under a diffusion‐controled and pH–dependent process. The oxidation process in acid and physiological media occurs in two consecutive steps with formation of a main electroactive oxidation product in acid medium. Both oxidation steps involve the transfer of one electron and one proton, corresponding to the oxidation of phenolic groups with formation of ortho‐quinone derivatives, which are reversibly reduced to form catechol derivatives, and/or polymeric products. One electron and one proton are removed from the phenolic group at the position C6’ at the first step and at position C3’ at the second step. The diffusion coefficient of FLSC was assessed in pH=7.0 phosphate buffer (9.77×10⁻⁵ cm² s⁻¹). A differential pulse voltammetric method for determination of FLSC in physiological medium was also proposed.     

Factor analysis of spectroelectrochemical reduction of FAD reveals the pKa of the reduced state and the reduction pathway

The free flavin adenine dinucleotide (FAD) cofactor is known to exhibit a pH‐dependent midpoint potential involving a simultaneous two‐electron transfer step (n = 2). Uv‐vis spectroelectrochemical reductions of FAD at constant pH, ranging from 5 to 9, were recorded and analyzed by factor analysis. Principal factor analysis was used to determine the number of species present at each pH. The results indicate that only two composite forms of FAD are present: the oxidized and the reduced forms. Window factor analysis was used to extract the concentration profiles of the controlling species. The oxidized form was found to be a single pH‐independent species, whereas the reduced form consists of two species. The pH‐dependent spectroscopic changes of reduced FAD were best modeled by a single proton transfer step involving two different ionization states with an apparent pK_a = 6.3. This value compares favorably with those obtained from NMR and from midpoint potential measurements. At pH 6, the reduction of FAD was found to be first order, whereas at pH 9 the reduction is zero order; these observations are explained in terms of the reaction pathway involving xanthine oxidase, its substrate, and the pH. Copyright © 2007 John Wiley & Sons, Ltd.     

Redox Mechanisms of Nodularin and Chemically Degraded Nodularin

The electrochemical behaviour of Nodularin (NOD), a hepatotoxic cyclic pentapeptide, was studied at a glassy carbon electrode. NOD electrochemical oxidation is an irreversible, pH‐independent process, involving the transfer of one electron. Upon incubation in different pH electrolytes, chemical degradation of NOD was electrochemically detected by the appearance of a new oxidation peak. The chemically degraded NOD (cdNOD), undergoes an irreversible, pH‐dependent oxidation, and its redox products are reversibly oxidised. The charge transfer properties of cdNOD as well as of its redox metabolites were investigated. Mechanisms for NOD oxidation, NOD chemical degradation and oxidation of cdNOD and its metabolites were proposed.     

Electrochemical Oxidation at a Glassy Carbon Electrode of the Anti‐Arrhythmia Drug Disopyramide

Abstract

A voltammetric study of the oxidation of disopyramide has been carried out using a glassy carbon electrode. The electrochemical oxidation of disopyramide was investigated by cyclic, differential pulse, and square wave voltammetry. The oxidation of disopyramide is an irreversible, diffusion‐controlled process. The diffusion coefficient of disopyramide was calculated in pH 7.0 phosphate buffer to be D _disopyramide=3.8×10^?6 cm² s^?1. The oxidation of disopyramide is also pH dependent and for electrolytes with pH between 4 and 7 occurs with the transfer of one electron and one proton. In alkaline electrolytes, two consecutive charge transfer reactions are observed: both oxidation reactions involve the transfer of two electrons but only the first also involves the transfer of two protons. Two procedures for the analytical determination of disopyramide in pH 7.0 phosphate buffer were developed and compared and a detection limit LOD=1.27 µM was obtained.     

Square‐Wave Voltammetry of Sodium Copper Chlorophyllin on Glassy‐Carbon and Paraffin‐Impregnated Graphite Electrode

Electrochemical oxidation of sodium copper chlorophyllin (CHL) has been investigated at a glassy‐carbon (GC) and paraffin‐impregnated graphite electrode (PIGE) using square‐wave voltammetry (SWV). Square‐wave voltammograms of other two chlorin‐type compounds, namely chlorin e₆ and chlorophyll a, have been studied as well. The measurements were performed in the pH range between 7 and 11. The square‐wave frequency was changed between 8 and 1000 Hz. The oxidation of studied chlorins is a complex, pH‐independent, reversible or quasireversible process, followed by the chemical transformation of the product. The product of the EC reaction of CHL is an electroactive π? π dimer, which strongly adsorbs on the electrode surface and undergoes further oxidation at more positive potential. The electrooxidation of the adsorbed dimer is a pH‐independent irreversible process with the formation of an electroinactive film. The voltammetric behaviour of chlorin e₆ on PIGE was qualitatively similar to that of CHL. The SW voltammograms of chlorin e₆ recorded on GCE and of chlorophyll a recorded on PIGE consisted of only one peak. The SW responses of studied compounds strongly depend on the stabilization of the reaction intermediate by adsorption to the electrode surface.     

Sorbic Acid and Its Degradation Products: Electrochemical Characterization

The electrochemical redox behavior of sorbic acid (SA), an important food preservative, was investigated at a glassy carbon electrode using cyclic, differential pulse, and squarewave voltammetry over a wide pH range. The oxidation of SA is an irreversible, diffusion-controlled, and pH-independent process that occurs with the transfer of only one electron and does not involve the formation of any electroactive oxidation product. Adsorption of SA at GCE electrodes was also observed. Following incubation in different pH electrolytes, the degradation of SA was electrochemically detected by the appearance of a new oxidation peak at lower potential value. The degradation products, formed homogenously in solution, undergo irreversible oxidation and lead to the formation of two oxidation products that strongly adsorb on the electrode surface and are reversibly oxidized. SA degradation was also confirmed using HPLC and UV-Vis spectrophotometry. A mechanism for oxidation of SA and its degradation products in aqueous solutions was proposed.     

Electrochemical Behavior of Some Thiotriazoles in Aqueous‐Alcoholic Media at GCE

An electrochemical study related to the electrooxidation of 4‐amino‐3‐thio‐5‐methyl‐1,2,4‐triazole (I), 4‐amino‐3‐thio‐5‐phenyl‐1,2,4‐triazole (II) and 3‐thio‐5‐phenyl‐1,2,4‐triazole (III), in 10% v/v methanol‐acetate buffer pH 4.6 has been performed. A variety of electrochemical techniques such as differential pulse voltammetry, cyclic voltammetry, double‐potential step chronoamperometry, rotating‐disk electrode voltammetry and coulometry, were employed to clarify that the mechanism of the electrode process follows the oxidation of thiol compounds. All the compounds exhibit similar redox behavior under the given conditions. They display one irreversible oxidation peak, which is diffusion controlled. From the plot of current function in cyclic voltammetry and the ratio of i_c/i_a less than one in double‐potential step chronoamperometry, it was established that these compounds undergo an one electron oxidation followed by a dimerization process involving the formation of disulfide derivative (EC mechanism). The pK_a values were obtained by the dependence of limiting current and potential with in the wide pH interval. The transfer coefficients, the diffusion coefficients and rate constant of coupled chemical reaction were also reported. The substituent effects were also investigated.     

Microcystin-LR and chemically degraded microcystin-LR electrochemical oxidation

Microcystins (MCs) are cyclic hepatotoxic heptapeptides produced by certain strains of freshwater cyanobacteria toxic for humans and animals. The electrochemical behaviour of microcystin-LR (MC-LR) at a glassy carbon electrode (GCE) was investigated using cyclic voltammetry (CV), square wave voltammetry (SWV) and differential pulse voltammetry (DPV). The oxidation of MC-LR is a diffusion-controlled irreversible and pH-independent process that occurs with the transfer of only one electron and does not involve the formation of any electroactive oxidation product. Upon incubation in different pH electrolytes, homogeneous degradation of MC-LR in solution was electrochemically detected by the appearance of a new oxidation peak at a lower potential. The electrochemical behaviour of chemically degraded MC-LR is an irreversible, pH-dependent process, and involves the formation of two redox products that undergo reversible oxidation. The formation of degradation products of MC-LR was confirmed by HPLC with UV detection at room temperature. Experiments were also carried out in solutions containing constituent MC-LR amino acids, which enabled the understanding of the MC-LR electron transfer reaction and degradation. An oxidation mechanism for MC-LR is proposed.     

Electrochemical Detection of Guanine‐methylation Using Glassy Carbon Electrode

This work presents a study of the electrochemical oxidation of 7‐methylguanine (7‐mGua) in aqueous solution at glassy carbon electrode by cyclic voltammetry, differential pulse voltammetry, square wave voltammetry and electrochemical impedance spectrometry. The anodic behaviour of 7‐mGua was compared with the electro‐oxidation of guanine and 7‐methylguanosine. The results demonstrated that the methyl and ribose groups are not electroactive but strongly influence the oxidation mechanism of these species. The oxidation of 7‐mGua occurred in a single pH‐dependent step, with the withdrawal of two electrons and two protons of C8, to form 8‐oxo‐7‐methylguanine, while the electro‐oxidation of 7‐methylguanosine also occurred in a single pH‐dependent step, however, with the withdrawal of one electron and one proton of C8 to form a hydroxylated product, since its oxidation to 8‐oxo‐7‐methylguanosine is hindered by the presence of the pendant groups. In addition, the oxidation of 7‐mGua was investigated in the presence of DNA and DNA‐bases, leading to the conclusion that the formation of 7‐mGua, from an interaction of DNA with an alkylating agent, would cause an increase on the deoxyguanosine peak current of the DNA‐biosensor, with no interference of any free DNA bases, which demonstrated that DNA‐electrochemical biosensors find application on detecting DNA methylation, opening a new avenue for applications of DNA biosensors.     

Reactivity of 3‐Methylbenzenediazonium Ions with Gallic Acid. Kinetics and Mechanism of the Reaction

We investigated the kinetics and mechanism of the reaction between the 3‐methylbenzenediazonium ions (3MBD), and gallic acids (=3,4,5‐trihydroxybenzoic acid; GA) in aqueous buffer solution under acidic conditions by employing spectrometric, electrochemical, and chromatographic techniques and computational methods. To discern which of the three OH groups of GA is the first one undergoing deprotonation, the geometries of the resulting dianions were optimized by using B3LYP hybrid density‐functional theory (DFT) and a 6‐31G(++d,p) basis set, and the results suggest that the OH group at the 4‐position is the first one which is deprotonated. The variation of the observed rate constant, k_obs, with the acidity at a given [GA] follows an upward curve suggesting that the reaction takes place with the dianionic form of gallic acid, GA^2?, and rate enhancements of ca. 23000 fold are obtained on going from pH 3.5 up to pH 7.5. At relatively high acidities, the variation of k_obs with [GA] is linear with an intercept very close to the value for the thermal decomposition of 3MBD; however, a decrease in the acidity leads to saturation‐kinetics profiles with nonzero, pH‐dependent intercepts. The saturation‐kinetics patterns found suggest the formation of an intermediate in a rapid pre‐equilibrium step, but the nonzero, pH‐dependent intercepts cause the double reciprocal plots of 1/k_obs vs. 1/[GA] to curve. This prompts us to propose an alternative reaction mechanism comprising consecutive equilibrium processes involving the bimolecular, reversible formation of a highly unstable (Z)‐diazo ether which undergoes isomerization to the (E)‐isomer through a unimolecular step. The results obtained indicate the complexity of reactions of arenediazonium ions with nucleophilic arenes containing three or more OH groups.     

白杨素在汞电极上的电化学行为及其消除超氧阴离子自由基能力研究

The electrochemical behavior of chrysin in pH 2.0-9.0 Britton-Robinson （B-R） buffer solutions was studied by the means of linear sweep voltammetry and cyclic voltammetry at a static mercury drop electrode. In different pH range of B-R buffer solutions, chrysin could cause four reduction waves. In pH 2.0-5.8 B-R buffer solutions, wave P1 yielded by chrysin is a one-electron reduction wave, and wave P1 caused by further reduction of the products of wave P1 in pH〈3.0 B-R buffer solution is also a one-electron reduction wave. But in 3.0〈pH〈5.8 B-R buffer solution wave P1 was overlapped by the hydrogen wave. Between pH 5.8 and 9.0, chrysin could yield two reduction waves P2 and P3- The former is an irreversible adsorptive wave of ionized chrysin involving one electron and the latter is also an irreversible adsorptive wave of reduction intermediate radical of chrysin involving one electron and one proton. And a linear relationship between ip3 and the concentration of chrysin can be established from 1.0×10^-6 to 4.0×10^-5 mol·L^-1 （r=0.9924） with the detection limit of 5×10^-7 mol·L^-1. In addition, the antioxidant ability of chrysin was investigated by linear sweep voltammetry （LSV）. The determination result of IC50 of chrysin showed that chrysin is a good antioxidant.     

Effect on Charge Transfer and Charge Recombination by Insertion of a Naphthalene‐Based Bridge in Molecular Dyads Based on Borondipyrromethene (Bodipy)

The photophysical properties of two related dyads based on a N,N‐dimethylaniline donor coupled to a fully‐alkylated boron dipyrromethene (Bodipy) acceptor are described. In one dyad, BD1 , the donor unit is attached directly to the Bodipy group, whereas in the second dyad, BD2 , a naphthalene spacer separates the two units. Cyclic voltammograms recorded for the two dyads in deoxygenated MeCN containing a background electrolyte are consistent with the reversible one‐electron oxidation of the N,N‐dimethylaniline group and the reversible one‐electron reduction of the Bodipy nucleus. There is a reasonable driving force (ΔG_CT) for photoinduced charge transfer from the N,N‐dimethylaniline to the Bodipy segment in MeCN. The charge‐transfer state is formed for BD1 extremely fast (1.5 ps), but decays over 140 ps to partially restore the ground state. On the other hand, the charge‐transfer state for BD2 is formed more slowly, but it decays extremely rapidly. Charge recombination for both dyads leads to a partial triplet formation on the Bodipy group. The naphthalene spacer group is extremely efficient at promoting back electron transfer.     

Carbonylation of nitrobenzene in methanol with palladium bidentate phosphane complexes: an unexpectedly complex network of catalytic reactions, centred around a Pd-imido intermediate

The reactivity of palladium complexes of bidentate diaryl phosphane ligands (P₂) was studied in the reaction of nitrobenzene with CO in methanol. Careful analysis of the reaction mixtures revealed that, besides the frequently reported reduction products of nitrobenzene [methyl phenyl carbamate (MPC), N,N′‐diphenylurea (DPU), aniline, azobenzene (Azo) and azoxybenzene (Azoxy)], large quantities of oxidation products of methanol were co‐produced (dimethyl carbonate (DMC), dimethyl oxalate (DMO), methyl formate (MF), H₂O, and CO). From these observations, it is concluded that several catalytic processes operate simultaneously, and are coupled via common catalytic intermediates. Starting from a P₂Pd⁰ compound formed in situ, oxidation to a palladium imido compound P₂Pd^II?NPh, can be achieved by de‐oxygenation of nitrobenzene 1) with two molecules of CO, 2) with two molecules of CO and the acidic protons of two methanol molecules, or 3) with all four hydrogen atoms of one methanol molecule. Reduction of P₂Pd^II?NPh to P₂Pd⁰ makes the overall process catalytic, while at the same time forming Azo(xy), MPC, DPU and aniline. It is proposed that the Pd–imido species is the central key intermediate that can link together all reduction products of nitrobenzene and all oxidation products of methanol in one unified mechanistic scheme. The relative occurrence of the various catalytic processes is shown to be dependent on the characteristics of the catalysts, as imposed by the ligand structure.