NH4+ Deprotonation at Interfaces Induced Reversible H3O+/NH4+ Co-insertion/Extraction

Ion insertions always involve electrode-electrolyte interface process, desolvation for instance, which determines the electrochemical kinetics. However, it′s still a challenge to achieve fast ion insertion and investigate ion transformation at interface. Herein, the interface deprotonation of NH₄⁺ and the introduced dissociation of H₂O molecules to provide sufficient H₃O⁺ to insert into materials′ structure for fast energy storages are revealed. Lewis acidic ion-NH₄⁺ can, on one hand provide H₃O⁺ itself via deprotonation, and on the other hand hydrolyze with H₂O molecules to produce H₃O⁺. In situ attenuated total reflection-Fourier transform infrared ray method probed the interface accumulation and deprotonation of NH₄⁺, and density functional theory calculations manifested that NH₄⁺ tend to thermodynamically adsorb on the surface of monoclinic VO₂, and deprotonate to provide H₃O⁺. In addition, the inserted NH₄⁺ has a positive effect for stabilizing the VO₂(B) structure. Therefore, high specific capacity (>300 mAh g⁻¹) and fast ionic insertion/extraction (<20 s) can be realized in VO₂(B) anode. This interface derivation proposes a new path for designing proton ion insertion/extraction in mild electrolyte.     

Über die Darstellung der Pnikogenoniumsalze AsH4+SbF6−, AsH4+AsF6−, SbH4+SbF6−

On the Preparation of Pnikogenonium Salts AsH₄⁺SbF₆^?, AsH₄⁺AsF₆^?, SbH₄⁺SbF₆^? The preparation of the pnikogenonium salts AsH₄⁺SbF₆^?, AsH₄⁺AsF₆^? and SbH₄⁺SbF₆^? by protonation from the hydrides AsH₃, SbH₃ in superacidic systems HF/SbF₅ and HF/AsF₅, resp. is reported. The salts are characterized by vibrational and mass spectra. A general valence force field is calculated. The following onium ions are know as hexafluoroantimonate:      

Ge4+、Sn4+掺杂尖晶石LiMn2O4的合成与电化学表征

使用Ge⁴⁺、Sn⁴⁺作为掺杂离子, 通过高温固相法制备四价阳离子掺杂改性的尖晶石LiMn₂O₄材料. X射线衍射(XRD)和扫描电子显微镜(SEM)分析表明, Ge⁴⁺离子取代尖晶石中Mn⁴⁺离子形成了LiMn_2-xGe_xO₄ (x=0.02,0.04, 0.06)固溶体; 而Sn⁴⁺离子则以SnO₂的形式存在于尖晶石LiMn₂O₄的颗粒表面. Ge⁴⁺离子掺入到尖晶石LiMn₂O₄材料中, 抑制了锂离子在尖晶石中的有序化排列, 提高了尖晶石LiMn₂O₄的结构稳定性; 而在尖晶石颗粒表面的SnO₂可以减少电解液中酸的含量, 抑制酸对LiMn₂O₄活性材料的侵蚀. 恒电流充放电测试表明, 两种离子改性后材料的容量保持率均有较大幅度的提升, 有利于促进尖晶石型LiMn₂O₄锂离子电池正极材料的商业化生产.     

Behavior of Co4+ ion in K2NiF4-type (Ca1+xSm1−x)CoO4

Orthorhombic K₂NiF₄-type (Ca_1+xSm_1−x)CoO₄ (0.00 ≤ x ≤0.15) with space group Bmab has been synthesized by the polymerized complex route. The cell parameters (a and b) decrease, while the cell parameter (c) increases with increasing Co⁴⁺ ion content. The global instability index (GII) indicates that the crystal stability of (Ca_1+xSm_1−x)CoO₄ is not influenced by the Co⁴⁺ ion content. (Ca_1+xSm_1−x)CoO₄ is a p-type semiconductor and exhibits hopping conductivity in the small-polaron model at low temperatures. The magnetic measurement indicates that (Ca_1+xSm_1−x)CoO₄ shows paramagnetic behavior above 5 K, and that the spin state of both the Co³⁺ and Co⁴⁺ ions is low. The Co⁴⁺ ion acts as an acceptor, and the electron transfer becomes active through the Co³⁺–O–Co⁴⁺ path as the Co⁴⁺ ions increase.     

Structure and stability of SiH+4

Ab initio calculations at the 4-31G level are carried out on the species SiH_n (n = 0 to 4) and the corresponding ions. SiH⁺₄ is found to distort from T_d to D_2d. C_2v, and C_3v, with the latter structure being the lowest in energy by 11 kcal/mole. Consistent with experimental mass spectroscopy, SiH⁺₄ is found to be much less stable to dissociation than CH⁺₄.     

Darstellung und Kristallstruktur von PI4+ AlI4−

Preparation and Crystal Structure of PI₄⁺AlI₄^? PI₄⁺AlI₄^? was prepared and its crystal structure determined by single crystal X-ray data (orthorhombic, Pna2₁, a = 1109.4, b = 1048.5, c = 1529.3 pm, V = 1778.8 · 10⁶ pm³, Z = 4). The nearly tetrahedral cations and anions (mean P? I and Al? I distances: 239.6 and 251.8 pm respectively) are connected to a three-dimensional structure by weak iodine-iodine bonds (338.6–345.1 pm).     

Controlled synthesis and characterization of LaPO4, LaPO4:Ce3+ and LaPO4:Ce3+, Tb3+ by EDTA assisted hydrothermal method

LaPO₄, LaPO₄:Ce³⁺ and LaPO₄:Ce³⁺, Tb³⁺ particles with different morphologies and sizes have been successfully synthesized via a simple EDTA assisted hydrothermal method. The effects of the doping components, pH value, and the chelating reagent on the phases, structures and morphologies were well investigated by means of X-ray powder diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), scanning electron microscopy (SEM), and transmission electron microscopy (TEM). Photoluminescent (PL) spectra and kinetic decays were used to characterize the fluorescent properties of the samples. The results reveal that all the samples are of high purity and assigned to the single-crystalline monoclinic structure of LaPO₄ phase. The aspects ratio of the nanostructures synthesized in acid synthetic condition is larger than those obtained in alkaline solution. Additionally, the Ce³⁺ or/and Tb³⁺ doped LaPO₄ particles show less smoother surface compared with pure LaPO₄. Furthermore, the tendency for anisotropic growth under hydrothermal conditions can be simply enhanced by selecting the chelating ligands (EDTA). The possible growth mechanism of the LaPO₄:Ln³⁺ (Ln = Ce³⁺, Tb³⁺) nanostructures has been proposed as well. Upon ultraviolet excitation, LaPO₄:Ce³⁺ and LaPO₄:Ce³⁺, Tb³⁺ phosphors show the characteristic 5d–4f emissions of Ce³⁺ and ⁵D₄–⁷F_j (j = 6–3) emission lines of Tb³⁺, respectively.     

Structure and stability of the tetrahydridoselenonium dication,SeH4 2+

Ab initio molecular orbital theory with triple-zeta-valence plus polarization basis sets and with electron correlation incorporated at the fourth-order Møller-Plesset level has been used to study the tetrahydridoonium dications, OH₄ ²⁺, SH₄ ²⁺, and SeH₄ ²⁺. The tetrahydridoselenonium dication SeH₄ ²⁺ is predicted to have a tetrahedral (T _d )structure, similar to OH₄ ²⁺ and SH₄ ²⁺, with short bonds to hydrogen (1.483 Å). Although deprotonation of SeH₄ ²⁺ is thermodynamically favored Cby 104 kJ mol^–1), such a reaction is inhibited by a large barrier (240kJmol^–1]. Thus, SeH₄ ²⁺ lies in a deep potential well and as an isolated species should have a long lifetime in the gas phase. The estimated heat of formation, H° _f , for SeH₄ ²⁺ is very high (2483 kJ mol^–1], as is the case for OH₄ ²⁺ and SH₄ ²⁺. Of the group IV onium dications (OH₄ ²⁺, SH₄ ²⁺, and SeH₄ ²⁺), SeH₄ ²⁺ displays the greatest kinetic and thermodynamic stability toward proton loss. Substantial solvent stabilization is required in order to generate SeH₄ ²⁺ in solution.     

Synthese und Kristallstruktur von Ba25Cu142+Cu43+Zn4O49

Synthesis and Crystal Structure of Ba₂₅Cu₁₄²⁺Cu₄³⁺Zn₄O₄₉ Single crystals of Ba₂₅Cu₁₄²⁺Cu₄³⁺Zn₄O₄₉ were prepared with solid state and flux reactions. X-ray investigations show tetragonal symmetry, space group D⁷_4th–P4/nmm, a = 18.2146, c = 9.3230 Å, Z = 2. The hitherto unknown structure type shows copper in square pyramids and planar polygones, connected to six member rings or Cu₅O₂₀ groups. Slightly bent Cu₅O₁₂ groups produced by edge connection of five CuO₄ polygones are connected with ZnO₄ tetrahedra forming Cu₅Zn₄O₂₀ units. The complicated structure is shown step by step.     

New analysis of the 2ν4, ν4+ν6, 2ν6, ν3+ν4, ν3+ν6, ν1, ν5, ν2+ν4, 2ν3, ν2+ν6 and ν2+ν3 bands of formaldehyde H212C16O: Line positions and intensities in the 3.5 μm spectral region

This work is mainly motivated by the atmospheric importance of formaldehyde. The 3.5 μm region is indeed commonly used for the infrared detection of this molecule in the troposphere and the line parameters which are presently available in the atmospheric databases for H₂CO are of rather poor quality in this spectral range. Using New Fourier transform spectra recorded in LPMA and in GSMA it has been possible to perform an extensive study of the 2ν₄, ν₄+ν₆, 2ν₆, ν₃+ν₄, ν₃+ν₆, ν₁, ν₅, ν₂+ν_4, 2ν₃, ν₂+ν₆ and ν₂+ν₃ bands of formaldehyde. Combining these data with previous frequency and intensity measurements for the ν₃+ν_4, ν₃+ν₆, ν₁, ν_5, ν₂+ν_4, 2ν₃ and ν₂+ν₆ bands [L.R. Brown R.H. Toth and A.S. Pine J. Mol. Spectosc. 406–428 and references therein] and an adequate theoretical model, it proved possible to reproduce rather satisfactorily the experimental data and to generate a list of line positions and intensities for the 3.5 μm region. The Hamiltonian model accounts for the various Coriolis-type resonances and anharmonic resonances which perturb the energy levels of the 4², 4¹6¹, 6², 3¹4¹, 3¹6¹, 1¹, 5¹, 2¹4¹, 3², 2¹6¹, and 2¹3¹ vibrational states. This is also the case for the line intensity calculations, which allow one to reproduce satisfactorily the line-by-line intensity measurements as well as the integrated intensities available in the literature.     

Arrhenius parameters for the reactions CH3. + C4H10 → CH4 + C4H9. and C2H5. + C4H10 → C2H6 + C4H9.

Study of n-butane pyrolysis at high temperature in a flow system allows measurement of the sum of the rate constants of the initiation reactions and of the Arrhenius parameters of the reactions Established data for k₁/k₂ allow estimation of k₁ for 951°K and this, with recent thermochemical data, yields the result log k_?1 (l.mole s^?1) = 8.5, in remarkable agreement with a recent measurement [20] but over si×ty times smaller than conventional assumption. The product k₃k₄ (l.²mole^?2s^?2) is found to be associated with the Arrhenius parameters log (A₃A₄) = 21.90 ± 0.6 and (E₃ + E₄) = 38.3 ± 2.7 kcal/mole. These values are much higher than would be e×pected on the basis of low temperature estimates. Independent evaluation gives log A₄ = 10.5 ± 0.4 (l.mole^?1s^?1) and E₄ = 20.1 ± 1.7 kcal/mole, hence log A₃ = 11.4 ± 0.8 (l.mole^?1s^?1) and E₃ = 18.2 ± 3.2 kcal/mole. These values are shown to be entirely consistent with a wide range of results from pyrolytic studies, and it is argued that they further confirm the view that Arrhenius plots for alkyl radical–alkane metathetical reactions are strongly curved, in part due to tunneling and, appreciably, to other as yet unidentified effects. Since there is published evidence that metathetical reactions involving hydrogen atoms show even greater curvature, it is suggested that this may be a characteristic of many metathetical reactions.     

Production of C2H4Cl+ by dissociative photoionization of weak molecular complexes in C2H4+HCl mixtures

The photoionization efficiency (PIE) spectrum from 600 to 1200 Å for the production of the ion C₂H₄Cl⁺ by dissociative photoionization of the products of room-temperature jet expansions of a 1:4 mixture of C₂H₄ and HCl was measured at several nozzle pressures. The results were resolved into the PIE yield curve for the heterodimer process C₂H₄·HCl+hv→C₂H₄Cl⁺+H+e. This reaction is necessarily characterized by a large change in geometry between neutral complex and ionic product. The observed spectrum exhibits an unusual and conspicuous peak at 15.2 eV that is characterized by a sharp cutoff to the high energy side. This feature points to the onset of strongly nonstatistical channels for the production of C₂H₄Cl⁺ at this energy such that product formation proceeds through very few states. The observed onset of C₂H₄Cl⁺ at 11.92±0.24 eV is 17±6 kcal mol^?1 above the true threshold. An important conclusion is that at all energies above the onset the yield of dissociative ionization of the heterodimer to the cation C₂H₄Cl⁺ is determined by dynamical factors.     

ESI activity of Br−, BF4−, ClO4− and BPh4− anions in the presence of Li+ and NBu4+ counter‐ions

To improve our understanding of the electrospray ionization (ESI) process, we have subjected equimolar mixtures of salts A⁺X⁻ (A⁺ = Li⁺, NBu₄⁺; X⁻ = Br⁻, ClO₄⁻, BF₄⁻, BPh₄⁻) in different solvents (CH₃CN, tetrahydrofuran, CH₃OH, H₂O) to negative‐ion mode ESI and analyzed the relative ESI activity of the different anionic model analytes. The ESI activity of the large and hydrophobic BPh₄⁻ ion greatly exceeds that of the smaller and more hydrophilic anions Br⁻, ClO₄⁻ and BF₄⁻, which we ascribe to its higher surface activity. Moreover, the ESI activity of the anions is modulated by the action of the counter‐ions and their different tendency toward ion pairing. The tendency toward ion pairing can be reduced by the addition of the chelating ligands 12‐crown‐4 and 2.2.1 cryptand and is, although to a smaller degree, further influenced by the variation of the solvent. Complementary electrical conductivity measurements afford additional information on the interactions of the ionic constituents of the sample solutions. Copyright © 2017 John Wiley & Sons, Ltd.     

A new solvent system for the separation of Th4+, UO 2 2+ and Zr4+ in the presence of common anions by thin-layer chromatography

Summary A TLC method has been developed for separating Th⁴⁺, UO₂ ²⁺ and Zr⁴⁺ in the presence of some common anions using a dimethylamine/acetone/formic acid mobile phase. Capacity factors, separation factors and resolution for the separation of Th⁴⁺ from UO₂ ²⁺ have been evaluated. The effect of the pH of the sample on R_F values of Th⁴⁺, UO₂ ²⁺, Ni²⁺ and Cu²⁺ has also been examined.     

Cyanide Complexes Based on {Mo6I8}4+ and {W6I8}4+ Cluster Cores

Compounds based on new cyanide cluster anions [{Mo₆I₈}(CN)₆]^2–, trans-[{Mo₆I₈}(CN)₄(MeO)₂]^2– and trans-[{W₆I₈}(CN)₂(MeO)₄]²⁻ were synthesized using mechanochemical or solvothermal synthesis. The crystal and electronic structures as well as spectroscopic properties of the anions were investigated. It was found that the new compounds exhibit red luminescence upon excitation by UV light in the solid state and solutions, as other cluster complexes based on {Mo₆I₈}⁴⁺ and {W₆I₈}⁴⁺ cores do. The compounds can be recrystallized from aqueous methanol solutions; besides this, it was shown using NMR and UV-Vis spectroscopy that anions did not undergo hydrolysis in the solutions for a long time. These facts indicate that hydrolytic stabilization of {Mo₆I₈} and {W₆I₈} cluster cores can be achieved by coordination of cyanide ligands.     

Mn4+-, Tb3+,4+-, and Er3+-activated red phosphors in the MgAl2Si2O8 system

Mn⁴⁺ doped and Tb^3+,4+, Er³⁺ co-doped MgAl₂Si₂O₈-based phosphors were prepared by conventional solid-state synthesis at 1,300 °C. They were characterized by thermogravimetry, differential thermal analysis, X-ray powder diffraction, photoluminescence, and scanning electron microscopy. The luminescence mechanism of the phosphors, which showed broad red emission bands in the range of 600–715 nm and had different maximum intensities when activated by UV illumination, was discussed. Such a red emission can be attributed to the intrinsic ²E → ⁴A₂ transitions of Mn⁴⁺.     

Free energy calculations involving NH4+ in water

The analysis of the hydration of NH₄⁺ and the estimation of relative or absolute free energies of hydration by means of Monte Carlo computer simulations using different 1-6-12 potential functions is reported. Two electrostatic representations of NH₄⁺ (used respectively by W.L. Jorgensen and P.A. Kollman) in conjunction with two common water models (TIP3P and TIP4P) are considered. A change in relative hydration free energies of 1.7 kcal/mol is found when the NH₄⁺ models are mutated into each other in either TIP3P or TIP4P. The NH₄⁺ → Na⁺ mutation in both solvent models leads to similar but overestimated relative hydration energies of about ?28.7 kcal/mol. Similarly, the NH₄⁺ annihilation significantly overestimates the absolute free energy of hydration.     

[MoFe3S4]3+ and [MoFe3S4]2+ cubane clusters containing a pentamethylcyclopentadienyl molybdenum moiety

A series of organometallic molybdenum/iron/sulfur clusters of the general formula [Cp¹MoFe₃S₄L_n]^m (Cp¹ = η⁵-C₅Me₅; L = S^tBu, SPh, Cl, I, n = 3, m = 1−; L_n = I₂(P^tBu₃), m = 0; L = 2,6-diisopropylphenylisocyanide (ArNC), n = 7, m = 1+) have been synthesized. A cubane cluster (PPh₄)[Cp¹MoFe₃S₄(S^tBu)₃] (2) was isolated from a self-assembly reaction of Cp¹Mo(S^tBu)₃ (1), FeCl₃, LiS^tBu, and S₈ followed by cation exchange with PPh₄Br in CH₃CN, while an analogous cluster (PPh₄)[Cp¹MoFe₃S₄(SPh)₃] (3) was obtained from the Cp¹MoCl₄/FeCl₃/LiSPh/PPh₄Br reaction system or from a ligand substitution reaction of 2 with PhSH. Treatment of 2 with benzoyl chloride gave rise to (PPh₄)[Cp¹MoFe₃S₄Cl₃] (4), which was in turn converted to (PPh₄)[Cp¹MoFe₃S₄I₃] (5) by the reaction with NaI. A neutral cubane cluster Cp¹MoFe₃S₄I₂(P^tBu₃) (6) was generated upon treating 5 with P^tBu₃. Although reduction of 4 by cobaltocene under the presence of ArNC resulted in a disproportionation of the cubane core to give Fe₄S₄(ArNC)₉Cl (7), a similar reduction reaction of 5 produced [Cp¹MoFe₃S₄(ArNC)₇]I (8), where the MoFe₃S₄ core was retained. The crystal structures of 4–6, and 8 were determined by the X-ray analysis.     

Suppression of charge imbalance via Li+-Mn4+ co-incorporated Sr2YSbO6 red phosphors for warm w-LEDs

Mn⁴⁺-activated double perovskite phosphors with composition diversity have presented excellent luminescent performances. However, the charge imbalance between Mn⁴⁺ and matrix cations would increase non-radiative recombination and reduce the structural stability. Here, novel high-efficiency stable Li⁺/Mn⁴⁺ co-incorporated Sr₂YSbO₆ red phosphors are successfully synthesized via a solid-state reaction method for warm w-LEDs, where the Li⁺ ions have the effect of charge balance for Sr₂YSbO₆:Mn⁴⁺ and reduce the non-radiative energy transfer among Mn⁴⁺ ions. It is demonstrated that the substitution of Li⁺–Mn⁴⁺ pairs for Sb⁵⁺ can enhance the bonding with low-shifted diffraction peaks and high emission intensity, and prolong the decay lifetime, compared with those of Mn⁴⁺ single-doped ones. Impressively, the thermal stability is enhanced to 89.72% from 84.61% at the original value of 303 K. Finally, a w-LED device based on the optimal phosphor Sr₂YSbO₆:0.01Mn⁴⁺/0.01Li⁺ red component exhibits a correlated color temperature of 4487 K and color rendering index of 80.2. Therefore, the incorporated Li⁺ ions serve as both charge compensator and co-activator in Mn⁴⁺-activated double perovskite phosphors with the aim of high luminescent performance and thermal stability.     

Electrospinning preparation and properties of NaGdF4:Eu3+ nanowires

Eu³⁺ doped NaGdF₄ (NaGdF₄:Eu³⁺) nanocrystals in hexagonal crystal phase were prepared by a polyol method, and the size and morphology controllable NaGdF₄:Eu³⁺/PVP nano-composite fibers were obtained through the electrospinning technique, and then the NaGdF₄:Eu³⁺ nanowires were obtained by followed annealing. By changing the ratio of PVP to NaGdF₄ as well as the calcination temperature, the optimal conditions for synthesizing the NaGdF₄ nanowires were obtained, and the structural properties of the synthesized sample were characterized by powder X-ray diffraction (XRD) patterns and field emission scanning electron micrographs (SEM) images. The luminescent properties of the NaGdF₄:Eu³⁺ nanocrystals and nanowires were also studied in this paper. We observed that the luminescent intensity of NaGdF₄:Eu³⁺ nanowires was greatly increased compared to the annealed NaGdF₄:Eu³⁺ nanocrystals at the same temperature.