Simultaneous Determination of Nickel and Cadmium by Adsorptive Stripping Voltammetry

A sensitive and fast method for the simultaneous determination of trace amounts of nickel and cadmium in real samples has been described using differential pulse adsorptive stripping voltammetry (DPASV) by adsorptive accumulation of the N,N′‐bis(salicylaldehydo)4‐carboxyphenylenediamine (BSCPDA)–complex on the hanging mercury drop electrode (HMDE). As supporting electrolyte 0.02 mol L^?1 ammonia buffers containing ligand has been used. Optimal analytical conditions were found to be: BSCPDA concentration of 42 μM, pH 9.6 and adsorption potential at ?50 mV versus Ag/AgCl. With an accumulation time of 20 s, the peaks current are proportional to the concentration of nickel and cadmium over the 1–180, and 0.5–200 ng mL^?1 with detection limits of 0.06 and 0.03 ng mL^?1 respectively. The sensitivity of method for determination of nickel and cadmium were obtained 0.54 and 0.98 nA mL ng^?1, respectively. The procedure was applied to simultaneous determination of nickel and cadmium in some real and synthetic artificial samples with satisfactory results.     

Modified Anodic Stripping Voltammetry Titration Technique for Estimating Complexation Capacity of Natural Waters

Abstract

An improved ASV-titration technique has been developed for estimating the complexation capacity of natural waters. In order to accomodate the slow kinetics of formation of certain complexes in water, an equilibration period of at least 24 hours is recommended. The use of copper as reference metal is recommended to obtain novel conservative estimates of complexation capacities. The method has been successfully applied to quantify complexation capacities of laboratory tap water and river waters.     

生物嘌呤碱的高效液相色谱分离和吸附伏安检测

本文叙述反相HPLC分离和吸附伏安法检测生物嘌呤碱的高灵敏分析法,给出了分离和测定的最佳条件,测定了Z0rbax ODS柱上的分离特性参数分辨率(R.)、分离因子(α).容量因子(k′)和吸附滞留焓(△H_R~°)。用该法分析尿样,标准加入50～100pmol生物嘌呤碱,回收率在89％～94％之间。     

Cathodic Adsorptive Stripping Voltammetry for Estimation of the Forest Area Pollution with Nickel and Cobalt

 Necessary conditions were established for simultaneous nickel and cobalt determination in environmental samples, such as oak wood and soil, based on cathodic adsorptive stripping voltammetry. Ni(II) and Co(II), complexed with dimethylglyoxime, were determined using a hanging mercury drop electrode. Optimum conditions were found to be: accumulation time 90 s, accumulation potential −0.80 V vs. SCE, supporting electrolyte 0.2 mol dm⁻³ ammonia-ammonium chloride buffer (pH = 9.4) + 0.05 mol dm⁻³ NaNO₂ and dimethylglyoxime 2 × 10⁻⁴ mol dm⁻³. A linear current-concentration relationship was observed up to 7.51×10 ⁻⁷ mol dm⁻³ for Ni(II) and 7.0 × 10⁻⁷ mol dm⁻³ for Co(II). Excess amounts of zinc(II) interfering with cobalt peaks were masked by complexation with EDTA. Wood and soils were mineralized by applying a microwave digestion system, using the mixtures H₂O₂ + HNO₃ or HNO₃ + HF, respectively. The developed procedure was tested by analysing international reference materials (BCR 62 Olive Leaves and GBW 08302 Tibet Soil). The developed procedure was used to determine pollution of oak stand with nickel and cobalt in different regions of Poland. Received August 10, 2000. Revision May 22, 2001.     

Determination of Rutin in Pharmaceutical Compounds and Tea Using Cathodic Adsorptive Stripping Voltammetry

A new sensitive electrochemical procedure is presented for the determination of Rutin based on the accumulation of Rutin onto the surface of hanging mercury drop electrode for 80 s. Then the preconcentrated Rutin‐complex was analyzed by cathodic stripping square‐wave voltammetry. The effect of various parameters such as pH, concentration of copper, accumulation potential, accumulation time and scan rate on the sensitivity were studied. The optimum conditions for determination of Rutin include pH 6.0, 6.0 ng mL^?1 copper(II) concentration, accumulation potential of ?0.30 V and scan rate of 0.40 V s^?1. Under the optimum conditions and for an accumulation time of 80 s, the measured peak current at about ?0.03 V is proportional to the concentration of Rutin over the range of 2.0–85.0 nM. The practical limit of detection is 0.5 nM. The relative standard deviations for six replicate analyses of 10 and 50 nM Rutin are 1.8% and 1.7%, respectively. The method was applied to the determination of Rutin in synthetic, tea, and pharmaceutical samples with satisfactory results. The diffusion coefficient, complex formation constant and number of electron transfer of Rutin–Cu(II) complex was also estimated.     

核苷酸与β-环糊精及硼酸盐的络合作用在高效毛细管电泳分离核苷酸中的应用

核苷酸和β-环糊精(β-CD)及硼酸盐之间存在络合作用，可应用于核苷酸的高效毛细管电泳分离，在10mmol/L β-CD和20mmol/L硼酸盐存在时，实现了8种单磷酸核苷酸的分离测定；讨论了pH值、β-CD浓度、硼酸盐浓度及分离电压对分离和络合作用的影响。     

Simultaneous Determination of Nickel and Cobalt Using a Solid Bismuth Vibrating Electrode by Adsorptive Cathodic Stripping Voltammetry

A simple, fast, sensitive and greener voltammetric procedure for simultaneous analysis of nickel (Ni) and cobalt (Co) by square wave adsorptive cathodic stripping voltammetry (SW‐AdCSV) using a solid bismuth vibrating electrode is presented for the first time. The procedure enables to determine Ni together with Co, in ammonia buffer 0.1 M (pH 9.2) and in the presence of oxygen, and involves an adsorptive accumulation of metal‐dimethylglyoxime (Ni‐DMG and Co‐DMG) complexes on the electrode surface. For Ni and Co, the detection limits, obtained with 30 s of accumulation time, were 0.6 and 1.0 µg L^?1, respectively. The method was free of metals (Cd²⁺, Cr³⁺, Cr⁶⁺, Cu²⁺, Fe³⁺ and Pb²⁺ up to 50 µg L^?1, Al³⁺ and Mn²⁺ up to 500 µg L^?1; Zn²⁺ up to 300 µg L^?1) interferences up to the concentrations mentioned in brackets. The proposed method was validated for simultaneous determination of Ni and Co in a certified reference surface and river waters with good results.     

Use of Adsorptive Transfer Stripping Voltammetry for Analyzing Variations of Cytosine Methylation in DNA

The electrochemical behavior and thermal stability of double stranded oligonucleotides containing 5‐methyl‐cytosine and 7‐deaza‐guanosine as nucleotide analogues, as well as of Jurkat genomic DNAs methylated to different degree were studied by ACV and SWV and by thernal denaturation analysis. ACV and SWV combined with thermal denaturation analysis of the natural and modified oligonucleotides gave information regarding the presence of methylation and the concomitant conformational changes. ACV and SWV of Jurkat DNA mixtures methylated to different degrees revealed a decrease of the peak heights with increasing methylation, indicating an increase of structural rigidity, in agreement with the thermal denaturation data. These results verify the, possibly local, conformational changes introduced by DNA methylation. The results obtained in all cases were reproducible.     

Adsorptive Stripping Voltammetry of Some Triazine- and Nitro Group-Containing Pesticides

Abstract

The application of adsorptive stripping analysis in combination with differential pulse voltammetry for the determination of some triazine- and nitro group- containing pesticides like Dinobutone, DNOK, Ametryne and Prometryne is described. Conditions for determinations in the concentration range from approx. 0.1 to 50 ppb are given.     

Determination of Dimethoate in Olive Oil by Adsorptive Stripping Square‐Wave Voltammetry

A method for the determination of dimethoate in olive oil by adsorptive stripping square‐wave voltammetry has been developed on the base that this pesticide is hydrolyzed in basic media giving rise to an adsorptive‐reductive peak at ?0.780 V. Extraction of dimethoate from olive oil with ethanol‐water and posterior clean‐up with C18 cartridges is carried out. Response Surface Methodology has been used for the optimization of the extraction procedure. A matrix effect is observed in olive oil extract; therefore the standard addition method must be used. The detection limit is 19.00 ng g^?1 and recoveries for three levels of fortification are ranged from 79.9% to 104.5%.     

阳极溶出伏安法测定镍的椭圆法研究

阳极溶出伏安法测定镍的椭圆法研究①朱伟杨雨如黄宗卿＊（重庆大学应用化学系重庆４０００４４）电极表面准单分子层上发生的物理或化学变化能使入射的椭圆偏振光的光学参量发生明显的变化，理论分析和实验测定均表明椭圆法可灵敏地提供电极表面０．１ｎｍ厚度层内发生变...     

Fostering and Understanding Iron Detection at the Ultratrace Level by Adsorptive Stripping Voltammetry with Catalytic Enhancement

Iron detection at the ultratrace level in seawater is at the forefront in chemical oceanography research and analytical methodologies for its determination are actively sought. Voltammetric methods and specifically cathodic stripping voltammetry (CSV) with catalytic enhancement, are particularly fit for this purpose as they avoid any separation and pretreatment step, showing high sensitivity and robustness towards the saline matrix. Here we introduce a simplification in the instrumentation for iron detection by CSV using 2,3‐dihydroxynaphthalene (DHN) as the ligand, atmospheric oxygen as the catalytic enhancer and a small 0.5 mL cell. The simplification involves the use of a standard, non‐specialized voltammetric cup as a holder for the small cell and the introduction of a simple silver wire as a pseudoreference electrode. The latter reduces the risk of sample contamination and is perfectly suited for employment with the small, 0.5 mL volume cell. Extensive optimization was performed in both ultrapure and seawater: a square wave frequency of 10 Hz was adopted, whereas the ligand concentration did not significantly influence the limit of detection (around 10 and 40 pM for ultrapure and seawater, respectively). The latter difference in signal to noise ratio was explained by the kinetics of iron complex reduction. The method was successfully validated by the analysis of a seawater sample with consensus value.     

Highly Sensitive and Selective Measurement of Bismuth in Seawater and Drug with 1,2‐Phenylenedioxydiacetic Acid by Cathodic Adsorptive Stripping Voltammetry

A new method is presented for determination of bismuth based on cathodic adsorptive stripping of complex bismuth with 1,2‐phenylenedioxydiacetic acid (PDA) at a hanging mercury drop electrode (HMDE). The effect of various parameters such as pH, concentration of ligand, accumulation potential and accumulation time on the selectivity and sensitivity were studied. The optimum conditions for determination of bismuth include nitric acid concentration 0.01 M, 8.0×10^?4 M PDA and accumulation time 120 s, accumulation potential of ?200 mV. The limits of detection are 0.25 and 0.05 nM, and responses are linear 1–1000 and 0.1–400 nM at t_acc of 60 and 120 s, respectively. Many common anions and cations do not interfere in the determination of bismuth. The method was applied to the determination of bismuth in some real samples such as sea – and spring water and drug.     

Trace Determination of Chromium by Square‐Wave Adsorptive Stripping Voltammetry on Bismuth Film Electrodes

This works reports the use of adsorptive stripping voltammetry (AdSV) for the trace determination of chromium on a rotating‐disk bismuth‐film electrode (BFE). During the reductive accumulation step, all the chromium species in the sample were reduced to Cr(III) which was complexed with cupferron and the complex was accumulated by adsorption on the surface of a preplated BFE. The stripping step was carried out by using a square‐wave (SW) potential‐time voltammetric signal. Electrochemical cleaning of the bismuth film was employed, enabling the same bismuth film to be used for a series of measurements in the presence of dissolved oxygen. The experimental variables as well as potential interferences were investigated and the figures of merit of the method were established. Using the selected conditions, the 3σ limit of detection for chromium was 100 ng L^?1 (for 120 s of preconcentration) and the relative standard deviation was 3.6% at the 2 μg L^?1 level (n=8). Finally, the method was applied to the determination of chromium in real samples with satisfactory results.     

铋膜电极方波吸附溶出伏安法测定纺织品中痕量钴和镍

本文建立了在铋膜修饰电极上采用方波吸附溶出伏安法同时测定纺织品中痕量Co2+和Ni2+的方法.以NH3-NH4Cl作为缓冲液,在丁二酮肟浓度为10 μmol/L的体系中,Co2和Ni2+的还原峰电位分别为-1.13 V和-1.03 V.当缓冲溶液pH为9.2,富集电位为-0.7V,富集时间为200 s时,C02 +和Ni2+在0.5～50 μg/L范围呈现良好的线性关系,相关系数R2＞0.99,其检出限分别为0.79 μg/L和0.96 μg/L,其它金属离子的干扰较小.采用标准加入法测定纺织品中Co>和Ni2+,回收率在94.88％～104.14％之间.     

Voltammetry and EQCM Investigation of Glutathione Monolayer and Its Complexation with Cu2+

The glutathione (GSH) self‐assembled monolayer and its compexlation with Cu²⁺ were studied by using voltammetry and EQCM. It was found that the monolayer could rearrange during the redox process of Cu²⁺/Cu⁺. The protonating, or not, of the carboxyl terminates of the adsorpted GSH molecules influence the compexlation interaction significantly for they are the key binding sites. The GSH monolayer had the capacity to accumulate Cu²⁺ and the monolayer modified gold electrode was employed to detect the low levels of Cu²⁺ with a limit of 1.0×10^?10 mol L^?1.     

Sensitive Detection of Capsaicin by Adsorptive Stripping Voltammetry at a Boron‐Doped Diamond Electrode in the Presence of Sodium Dodecylsulfate

In the present paper, a sensitive electroanalytical methodology for the determination of capsaicin using adsorptive stripping voltammetry (AdSV) at a boron‐doped diamond (BDD) electrode is presented. The voltammetric results indicate that in the presence of sodium dodecylsulfate (SDS) the BDD electrode remarkably enhances the oxidation of capsaicin which leads to an improvement of the peak current with a shift of the peak potential to less negative values. A linear working range of 0.05 to 6.0 µg mL^?1 (0.16–20 µM) with a detection limit of 0.012 µg mL^?1 (0.034 µM) has been obtained using BDD electrode by AdSV.     

胆绿素的溶出伏安法研究及胆红素的间接测定

本对胆绿素的吸附溶出分析法进行了研究，发现胆绿素在Ｎａ２ＨＰＯ４－Ｎａ３ＰＯ４（０．１ｍｏｌ／Ｌ，ｐＨ１１．５）缓冲溶液中可在－０．８３Ｖ（ｖｓ，ＳＣＥ）左右产生灵敏的吸附溶出峰，该峰可检测出低至５×１０＾－９ｍｏｌ／Ｌ胆绿素。在通常条件下，通过０．５ｍｉｎ预富集后溶出，可使峰高提高约一个数量级。应用此法间接测定了小牛血清中的胆红素含量。     

Lead Film Electrode Prepared with the Use of a Reversibly Deposited Mediator Metal in Adsorptive Stripping Voltammetry of Nickel

The paper presents the first report on application of a “hybrid” lead film electrode for the adsorptive stripping voltammetric determination of Ni(II) in the presence of nioxime as a complexing agent. The strategy to create a “hybrid” electrode is based on the combination of ex situ and in situ plating methods and the use of a reversibly deposited mediator metal (Zn) for the lead film formation. The surface morphology of a new sensor was characterized by atomic force microscopy. The detection limit for Ni(II) obtained at 120 s of accumulation time was 3.9×10^?11 mol L^?1. The proposed method was validated for the determination of nickel in water certified reference materials with good results.     

Ultrasensitive Simultaneous Quantification of Nanomolar Level of Cd and Zn by Cathodic Adsorptive Stripping Voltammetry in Some Real Samples

A novel, simple and sensitive adsorptive stripping voltammetry method was developed for simultaneous determination of Cd and Zn using N‐Nitrozo‐N‐phenylhydroxylamine (Cupferron) as a selective complexing agent. Cadmium and zinc metals gave peaks that were distinctly separated by 450–1200 mV, allowing their determination over a wide range of concentrations. The influence of pH and the nature of supporting electrolytes, concentration of ligand, preconcentration time and applied potential were investigated. The detection limits were 0.058 ng/mL for Zn and 0.092 ng/mL for Cd, and the RSD at a concentration level of 50 ppb, were 1.8–2.1 % for both zinc and cadmium, respectively. The method was applied to the determination of cadmium and zinc in blood, drug, food and water samples with the satisfactory results.