Cobalt‐Catalyzed Oxidative C−H/C−H Cross‐Coupling between Two Heteroarenes

The first example of cobalt‐catalyzed oxidative C?H/C?H cross‐coupling between two heteroarenes is reported, which exhibits a broad substrate scope and a high tolerance level for sensitive functional groups. When the amount of Co(OAc)₂?4 H₂O is reduced from 6.0 to 0.5 mol %, an excellent yield is still obtained at an elevated temperature with a prolonged reaction time. The method can be extended to the reaction between an arene and a heteroarene. It is worth noting that the Ag₂CO₃ oxidant is renewable. Preliminary mechanistic studies by radical trapping experiments, hydrogen/deuterium exchange experiments, kinetic isotope effect, electron paramagnetic resonance (EPR), and high resolution mass spectrometry (HRMS) suggest that a single electron transfer (SET) pathway is operative, which is distinctly different from the dual C?H bond activation pathway that the well‐described oxidative C?H/C?H cross‐coupling reactions between two heteroarenes typically undergo.     

Isomerization of Olefins Triggered by Rhodium‐Catalyzed CH Bond Activation: Control of Endocyclic β‐Hydrogen Elimination

Five‐membered metallacycles are typically reluctant to undergo endocyclic β‐hydrogen elimination. The rhodium‐catalyzed isomerization of 4‐pentenals into 3‐pentenals occurs through this elementary step and cleavage of two C? H bonds, as supported by deuterium‐labeling studies. The reaction proceeds without decarbonylation, leads to trans olefins exclusively, and tolerates other olefins normally prone to isomerization. Endocyclic β‐hydrogen elimination can also be controlled in an enantiodivergent reaction on a racemic mixture.     

trans‐Carbocarbonation of Internal Alkynes through a Formal anti‐Carbopalladation/C−H Activation Cascade

An intramolecular Pd‐catalyzed cascade reaction is presented that consists of a formal anti‐carbopalladation of a C?C triple bond followed by C?H activation. As a result, oligocyclic ring systems with an embedded tetrasubstituted double bond are formed. The key to success in affording the trans geometry of the emerging double bond are alkyne units with residues that must not undergo β‐hydride elimination (e.g., t‐butyl or silyl groups). Silyl groups proved to be a perfect handle to further convert the tetrasubstituted alkenes. The evaluation of kinetic data with a deuterium‐labeled compound and X‐ray analyses of trapped intermediates provided additional insight into the catalytic cycle.     

Ruthenium‐Catalyzed Monoalkenylation of Aromatic Ketones by Cleavage of Carbon–Heteroatom Bonds with Unconventional Chemoselectivity

Ruthenium‐catalyzed selective monoalkenylation of ortho C? O or C? N bonds of aromatic ketones was achieved. The reaction allowed the direct comparison of the relative reactivities of the cleavage of different carbon‐heteroatom bonds, thus suggesting an unconventional chemoselectivity, where smaller, more‐electron‐donating groups are more easily cleaved. Selective monofunctionalization of C? O bonds in the presence of ortho C? H bonds was also achieved.     

Surface oxidation process of a diamond‐like carbon film analyzed by difference X‐ray photoelectron spectroscopy

Difference X‐ray photoelectron spectroscopy (D‐XPS) revealed the surface oxidation process of a diamond‐like carbon (DLC) film. Evaluation of surface functional groups on DLC solely by the C 1s spectrum is difficult because the spectrum is broad and has a secondary asymmetric lineshape. D‐XPS clarified the subtle but critical changes at the DLC surface caused by wet oxidation. The hydroxyl (C―OH) group was dominant at the oxidized surface. Further oxidized carbonyl (C?O) and carboxyl (including carboxylate) (COO) groups were also obtained; however, the oxidation of C?O to COO was suppressed to some extent because the reaction required C―C bond cleavage. Wet oxidation cleaved the aliphatic hydrogenated and non‐hydrogenated sp² carbon bonds (C―H sp² and C―C sp²) to create a pair of C―OH and hydrogenated sp³ carbon (C―H sp³) bonds. The reaction yield for C―H sp² was superior at the surface, suggesting that the DLC film was hydrogen rich at the surface. Oxidation of aromatic sp² rings or polycyclic aromatic hydrocarbons such as nanographite to phenols did not occur because of their resonance stabilization with electron delocalization. Non‐hydrogenated sp³ carbon (C―C sp³) bonds were not affected by oxidation, suggesting that these bonds are chemically inert. Copyright © 2014 John Wiley & Sons, Ltd.     

Copper‐Catalyzed Site‐Selective Intramolecular Amidation of Unactivated C(sp3)H Bonds

The intramolecular dehydrogenative amidation of aliphatic amides, directed by a bidentate ligand, was developed using a copper‐catalyzed sp³ C? H bond functionalization process. The reaction favors predominantly the C? H bonds of β‐methyl groups over the unactivated methylene C? H bonds. Moreover, a preference for activating sp³ C? H bonds of β‐methyl groups, via a five‐membered ring intermediate, over the aromatic sp² C? H bonds was also observed in the cyclometalation step. Additionally, sp³ C? H bonds of unactivated secondary sp³ C? H bonds could be functionalized by favoring the ring carbon atoms over the linear carbon atoms.     

Quinolone Analogs 16: A Facile D–H Exchange for 3‐H Proton of 2‐Substituted 4‐Quinolones in Acidic Media

The 4‐quinolones having the urea or carbamate moiety at the 2‐position showed the facile deuterium–hydrogen (D–H) exchange of the 3‐H proton in deuteriotrifluoroacetic acid‐deuteriodimethyl sulfoxide (3:1) at 60°C, whereas the 4‐quinolones possessing the carboxylate or carbohydrazide group at the 2‐position and 2‐substituted 4‐methoxyquinolines represented no D –H exchange of the 3‐H proton under the same condition. The aforementioned D–H exchange was found to require both the tautomerization of the 4‐quinolone into 4‐hydroxyquinoline in strongly acidic media and the nitrogen functional group at the 2‐position.     

Evidence for site‐specific intra‐ionic hydrogen/deuterium exchange in the low‐energy collision‐induced dissociation product ion spectra of protonated small molecules generated by electrospray ionisation

The experimental investigation of site‐specific intra‐ionic hydrogen/deuterium (H/D) exchange in the low‐energy collision‐induced dissociation (CID) product ion spectra of protonated small molecules generated by electrospray ionisation (ESI) is presented. The observation of intra‐ionic H/D exchange in such ions under low‐energy CID conditions has hitherto been rarely reported. The data suggest that the intra‐ionic H/D exchange takes place in a site‐specific manner between the ionising deuteron, localised at either a tertiary amine or a tertiary amine‐N‐oxide, and a γ‐hydrogen relative to the nitrogen atom. Nuclear magnetic resonance (NMR) spectroscopy measurements showed that no H/D exchange takes place in solution, indicating that the reaction occurs in the gas phase. The compounds analysed in this study suggested that electron‐withdrawing groups bonded to the carbon atom bearing the γ‐hydrogen can preclude exchange. The effect of the electron‐withdrawing group appears dependent upon its electronegativity, with lower χ value groups still allowing exchange to take place. However, the limited dataset available in this study prevented robust conclusions being drawn regarding the effect of the electron‐withdrawing group. The observation of site‐specific intra‐ionic H/D exchange has application in the area of structural elucidation, where it could be used to introduce an isotopic label into the carbon skeleton of a molecule containing specific structural features. This could increase the throughput, and minimise the cost, of such studies due to the obviation of the need to produce a deuterium‐labelled analogue by synthetic means. Copyright © 2010 John Wiley & Sons, Ltd.     

4,8‐Di­methoxy‐1‐naphthalene­methanol

The title compound, C₁₃H₁₄O₃, crystallized in the centrosymmetric space group C2/c with one mol­ecule as the asymmetric unit. Each hydroxyl O atom is involved in hydrogen bonds with two other hydroxyl O atoms. The resulting chains of interactions propagate along [001]. In these interactions, the hydroxyl H atoms are disordered and the O?O distances are 2.648 (2) and 2.698 (2) Å. Two leading intermolecular C—H?O interactions have H?O distances of 2.80 and 2.84 Å and C—H?O angles of 136 and 144°; these interactions form chain and ring patterns. Taken together with the hydrogen bonds, they result in a three‐dimensional network.     

3,6‐Bis­(4‐hydroxy­benzyl)­piperazine‐2,5‐dione

In the title compound, C₁₈H₁₆N₂O₄, the piperidine ring adopts a chair conformation, lying on an inversion centre. The 4‐hydroxy­benzyl groups are in quasi‐axial positions. A two‐dimensional network is formed through N—H?O and O—H?O intermolecular hydrogen bonds and C—H?O interactions.     

Nickel‐Catalyzed Site‐Selective Amidation of Unactivated C(sp3)H Bonds

Intramolecular dehydrogenative cyclization of aliphatic amides was achieved on unactivated sp³ carbon atoms by a nickel‐catalyzed C?H bond functionalization process with the assistance of a bidentate directing group. The reaction favors the C?H bonds of β‐methyl groups over the γ‐methyl or β‐methylene groups. Additionally, a predominant preference for the β‐methyl C?H bonds over the aromatic sp² C?H bonds was observed. Moreover, this process also allows for the effective functionalization of benzylic secondary sp³ C?H bonds.     

Redox‐Neutral Coupling between Two C(sp3)−H Bonds Enabled by 1,4‐Palladium Shift for the Synthesis of Fused Heterocycles

The intramolecular coupling of two C(sp³)?H bonds to forge a C(sp³)?C(sp³) bond is enabled by 1,4‐Pd shift from a trisubstituted aryl bromide. Contrary to most C(sp³)?C(sp³) cross‐dehydrogenative couplings, this reaction operates under redox‐neutral conditions, with the C?Br bond acting as an internal oxidant. Furthermore, it allows the coupling between two moderately acidic primary or secondary C?H bonds, which are adjacent to an oxygen or nitrogen atom on one side, and benzylic or adjacent to a carbonyl group on the other side. A variety of valuable fused heterocycles were obtained from easily accessible ortho‐bromophenol and aniline precursors. The second C?H bond cleavage was successfully replaced with carbonyl insertion to generate other types of C(sp³)‐C(sp³) bonds.     

Directing‐Group‐mediated C−H‐Alkynylations

C?C triple bonds are amongst the most versatile functional groups in synthetic chemistry. Complementary to the Sonogashira coupling the direct metal‐catalyzed alkynylation of C?H bonds has emerged as a highly promising approach in recent years. To guarantee a high regioselectivity suitable directing groups (DGs) are necessary to guide the transition metal (TM) into the right place. In this Focus Review we present the current developments in DG‐mediated C(sp²)?H and C(sp³)?H modifications with terminal alkynes under oxidative conditions and with electrophilic alkynylation reagents. We will discuss further modifications of the alkyne, in particular subsequent cyclizations to carbo‐ and heterocycles and modifications of the DG in the presence of the alkyne.     

Asymmetric Organocatalytic Direct C(sp2)H/C(sp3)H Oxidative Cross‐Coupling by Chiral Iodine Reagents

An asymmetric organocatalytic direct C? H/C? H oxidative coupling reaction of N¹,N³‐diphenylmalonamides has been well established by using chiral organoiodine compounds as catalysts, wherein four C? H bonds were stereoselectively functionalized to give structurally diverse spirooxindoles with high levels of enantioselectivity. More importantly, the findings indicated that chiral hypervalent organoiodine reagents can serve as alternative catalysts for the creation of enantioselective functionalization of inactive C? H bonds.     

Regio‐ and Stereoselective Thianthrenation of Olefins To Access Versatile Alkenyl Electrophiles

Herein, we report a regioselective alkenyl electrophile synthesis from unactivated olefins that is based on a direct and regioselective C?H thianthrenation reaction. The selectivity is proposed to arise from an unusual inverse‐electron‐demand hetero‐Diels–Alder reaction. The alkenyl sulfonium salts can serve as electrophiles in palladium‐ and ruthenium‐catalyzed cross‐coupling reactions to make alkenyl C?C, C?Cl, C?Br, and C?SCF₃ bonds with stereoretention.     

Conformations of cationized linear oligosaccharides revealed by FTMS combined with in‐ESI H/D exchange

Previously (Kostyukevich et al. Anal Chem 2014, 86, 2595), we have reported that oligosaccharides anions are produced in the electrospray in two different conformations, which differ by the rate of gas phase hydrogen/deuterium (H/D) exchange reaction. In the present paper, we apply the in‐electrospray ionization (ESI) source H/D exchange approach for the investigation of the oligosaccharides cations formed by attaching of metal ions (Na, K) to the molecule. It was observed that the formation of different conformers can be manipulated by varying the temperature of the desolvating capillary of the ESI interphase. Separation of the conformers was performed using gas phase H/D approach. Because the conformers have different rates of the H/D exchange reaction, the deuterium distribution spectrum becomes bimodal. It was found that the conformation corresponding to the slow H/D exchange rate dominates in the spectrum when the capillary temperature is low (~200 °C), and the conformation corresponding to the fast H/D exchange rate dominates at high (~400 °C) temperatures. In the intermediate temperature region, two conformers are present simultaneously. It was also observed that large oligosaccharide requires higher temperature for the formation of another conformer. It was found that the presence of the conformers considerably depends on the solvent used for ESI and the pH. We have compared these results with the previously performed in‐ESI source H/D exchange experiments with peptides and proteins. Copyright © 2015 John Wiley & Sons, Ltd.     

Hydrogen–Deuterium Exchange Reactions of Aromatic Compounds and Heterocycles by NaBD4‐Activated Rhodium,Platinum and Palladium Catalysts

Conventional thermal and microwave conditions were compared for hydrogen–deuterium (H/D) exchange reactions of aminobenzoic acids catalysed by NaBD₄‐activated Pd/C or RhCl₃ with D₂O as the deuterium source. We also investigated different NaBD₄‐activated metal catalysts (including Pd/C, RhCl₃ and Pt/C) under microwave conditions for an efficient H/D exchange of aromatic and heterocyclic compounds. Even higher deuterium incorporations were obtained for Pd/C and Pt/C catalyst mixtures due to the previously observed synergistic effect. Finally, we have applied these optimised conditions for one‐step syntheses of the MS standards of several pharmaceutically active compounds.     

Highly Stereoselective Cobalt(III)‐Catalyzed Three‐Component C−H Bond Addition Cascade

A highly stereoselective three‐component C(sp²)?H bond addition across alkene and polarized π‐bonds is reported for which Co^III catalysis was shown to be much more effective than Rh^III. The reaction proceeds at ambient temperature with both aryl and alkyl enones employed as efficient coupling partners. Moreover, the reaction exhibits extremely broad scope with respect to the aldehyde input; electron rich and poor aromatic, alkenyl, and branched and unbranched alkyl aldehydes all couple in good yield and with high diastereoselectivity. Multiple directing groups participate in this transformation, including pyrazole, pyridine, and imine functional groups. Both aromatic and alkenyl C(sp²)?H bonds undergo the three‐component addition cascade, and the alkenyl addition product can readily be converted into diastereomerically pure five‐membered lactones. Additionally, the first asymmetric reactions with Co^III‐catalyzed C?H functionalization are demonstrated with three‐component C?H bond addition cascades employing N‐tert‐butanesulfinyl imines. These examples represent the first transition metal catalyzed C?H bond additions to N‐tert‐butanesulfinyl imines, which are versatile and extensively used intermediates for the asymmetric synthesis of amines.     

(+)‐Gibberellin C: hydrogen‐bonding pattern of the monohydrate of a non‐racemic pentacyclic diterpenoid

In the monohydrate of the title compound, (+)‐2β,4aα‐di­hydroxy‐1,7‐di­methyl‐8‐oxo‐4bβ,7α‐gibbane‐1α,10β‐di­carb­ox­yl­ic acid‐1,4a‐lactone, C₁₉H₂₄O₆·H₂O, intermolecular hydrogen bonding progresses helically along b from carboxyl to ketone [O?O = 2.694 (5) Å]. The carboxyl and lactone carbonyl groups in translationally related mol­ecules within a helix both accept hydrogen bonds from the same water of hydration. The oxy­gen of this water in turn accepts a hydrogen bond from the hydroxyl group of a third screw‐related mol­ecule in an adjacent counterdirectionally oriented helix, yielding a complex three‐dimensional hydrogen‐bonding array. Intermolecular O?H—C close contacts were found to the carboxyl and lactone carbonyls, the hydroxyl, and the water.