Development of internal amplification controls for DNA profiling with the AmpFℓSTR(®) SGM Plus(®) kit

DNA extracted from forensic samples can be degraded and also contain co‐extracted contaminants that inhibit PCR. The effects of DNA degradation and PCR inhibition are often indistinguishable when examining a DNA profile. Two internal amplification controls (IACs) were developed to improve quality control of PCR using the AmpF?STR^® SGM Plus^® kit. The co‐amplification of these controls with DNA samples was used to monitor amplification efficiency and detect PCR inhibitors. IAC fragments of 90 and 410 bp (IAC₉₀ and IAC₄₁₀) were generated from the plasmid pBR322 using tailed primers and then amplified with ROX‐labelled primers. Co‐amplification of IAC₉₀ and IAC₄₁₀ was performed with varying amounts of template DNA, degraded DNA and DNA contaminated with humic acid, heme and indigo dye. Both IAC₉₀ and IAC₄₁₀ were successfully amplified with human DNA without significantly affecting the quality of the DNA profile, even with DNA amounts lower than 0.5 ng. In the presence of inhibitors, the IAC₉₀ signal was still present after all human DNA loci fail to amplify; in contrast, the IAC₄₁₀ signal was reduced or absent at low levels of inhibition. Amplification of the two IACs provided an internal PCR control and allowed partial profiles caused by inhibition to be distinguished from degraded DNA profiles.     

Differential pre‐amplification of STR loci for fragmented forensic DNA profiling

DNA profiling of short tandem repeats (STR) has been successfully used for the identification of individuals in forensic samples, accidents and natural disasters. However, STR profiling of DNA isolated from old crime scenes and damaged biological samples is difficult due to DNA degradation and fragmentation. Here, we show that pre‐amplification of STR loci using biotinylated primers for the STR loci is an efficient strategy to obtain STR profiling results from fragmented forensic samples. Analysis of STR loci with longer amplicon sizes is generally hampered, since these relatively long loci are vulnerable to DNA fragmentation. This problem was overcome by using reduced or increased primer concentrations for loci with shorter or longer amplicon sizes, respectively, in our pre‐amplification strategy. In addition, pre‐amplification of STR loci into two groups of short or long amplicon size increases the efficiency of STR profiling from highly fragmented forensic DNA samples. Therefore, differential pre‐amplification of STR loci is an effective way to obtain DNA profiling results from fragmented forensic samples.     

Interference by complex structures of target DNA with specific PCR amplification

It has been considered that target DNA is a forgiving component for PCR amplification. Herein we present evidence to demonstrate that secondary structure located at the end of a template may interfere with the specificity of amplification. Experiments indicate that nonspecific amplification results from a long stretch of stem and loop structures at the 3′ end of prochymosin cDNA. Based on the sequence of mRNA coding for prochymosin, it is argued that the sequence responsible for the formation of the complex structure described here is most likely generated during synthesis of the second cDNA strand.     

螺旋通道微流控PCR芯片连续自动扩增DNA片段的研究

研制了由内向外流动的螺旋通道微流控PCR玻璃芯片,减少了PCR反应液在微通道中流动时的分散和阻力;讨论了扩增循环数和进样速度对长片段基因扩增的影响,在26min内成功扩增了质量浓度仅为10ng/mL的6012bpλ-DNA;通过将小孔径石英毛细管作为顺序注射(SI)系统的连接管路,使其死体积降到0.30μL.实现了微升级样品的自动换样、连续PCR扩增和微通道洗涤等功能.样品间无交叉污染.每小时可扩增500bpλ-DNA试样7个.扩增产物片段大小和荧光强度的相对标准偏差分别为0.4%和6.7%.     

Synergistic effects of nano-ZnO/multi-walled carbon nanotubes/chitosan nanocomposite membrane for the sensitive detection of sequence-specific of PAT gene and PCR amplification of NOS gene

The remarkable synergistic effects of the zinc oxide (ZnO) nanoparticles and multi-walled carbon nanotubes (MWNTs) were developed for the ssDNA probe immobilization and fabrication of the electrochemical DNA biosensor. The ZnO/MWNTs/chitosan nanocomposite membrane-modified glassy carbon electrode (ZnO/MWNTs/CHIT/GCE) was fabricated and the ssDNA probes were immobilized on the modified electrode surface. The preparation method is quite simple and inexpensive. The hybridization events were monitored by differential pulse voltammetry (DPV) using methylene blue (MB) as an indicator. As compared with previous MWNTs-based DNA biosensors, this composite matrix combined the attractive biocompatibility of ZnO nanoparticles with the excellent electron-transfer ability of MWNTs and fine membrane-forming ability of CHIT increased the DNA attachment quantity and complementary DNA detection sensitivity. The approach described here can effectively discriminate complementary DNA sequence, noncomplementary sequence, single-base mismatched sequence and double-base mismatched sequence related to phosphinothricin acetyltransferase (PAT) gene in transgenic corn. Under optimal conditions, the dynamic detection range of the sensor to PAT gene complementary target sequence was from 1.0 × 10⁻¹¹ to 1.0 × 10⁻⁶ mol/L with the detection limit of 2.8 × 10⁻¹² mol/L. The polymerase chain reaction (PCR) amplification of nopaline synthase (NOS) gene from the real sample of one kind of transgenic soybeans was also satisfactorily detected with this electrochemical DNA biosensor, suggesting that the ZnO/MWNTs/CHIT nanocomposite hold great promises for sensitive electrochemical biosensor applications.     

Developmental validation of the Yfiler Platinum PCR Amplification Kit for forensic genetic caseworks and databases

Y chromosome kits are successfully applied in cases where human biological material exists. With the development of genotyping ability, more Y chromosomal markers are needed for finer identification of male individuals and lineages. In this study, a developmental validation of a newly emerged Y chromosome kit that combines two different kinds of markers: 38 Y-STRs and 3 Y-indels are conducted. The results show that this kit has high sensitivity when there is a small amount of DNA (125 pg), more than one male (minor:major = 1:7), or a mixture of males and females (male:female = 125pg:1875pg), inhibited substances (800 μM hematin and more than 1600 ng/μL humic acid). The kit exhibits high precision level with a standard deviation of allele size no more than 0.14 nt. Locus DYS481 shows the largest stutter rate, with three stutters per true allele. Population samples are well identified (MP of 0.001106), and mutations can be observed in father–son pairs (46 mutations in 70 pairs, 10 in locus DYS627). Out of all the population samples, 13.2% belong to haplogroup M117-O2a2b1a1, with their ethnic group being Han Chinese. The results show that this kit can improve the performance of identifying male individuals, obtaining more unique haplotypes (increasing from 894 to 918 of 1000 male samples) and higher discrimination capacity (increasing from 0.942 to 0.955) in this study compared to previous widely used Yfiler Plus kit. Besides, it gives information about their paternal lineages in forensic genetic casework and genealogical database construction.     

Identification of deletion and duplication genotypes of the PMP22 gene using PCR-RFLP, competitive multiplex PCR, and multiplex ligation-dependent probe amplification: a comparison

We evaluated the efficacy of PCR-RFLP, competitive multiplex PCR, and a commercially available system of multiplex ligation-dependent probe amplification (MLPA) for the determination of deletion and duplication genotypes of the PMP22 gene. We compared the methods for efficiency, sensitivity, and specificity. We determined the gene dosage of the PMP22 gene via PCR-RFLP, competitive multiplex PCR, and MLPA. To demonstrate the sensitivity and accuracy of these three methods, a total of 185 samples from 42 patients with hereditary neuropathy with liability to pressure palsies (HNPP), 57 patients with Charcot-Marie-Tooth disease type 1A (CMT1A), and 86 unaffected individuals, were analyzed. Molecular diagnosis by PCR-RFLP was performed on all 185 samples; 24 HNPP deletions and 33 CMT1A duplications were identified. In contrast, 25 HNPP deletions and 38 CMT1A duplications were identified correctly using competitive multiplex PCR and MLPA. Six samples were incorrectly identified by PCR-RFLP (one HNPP deletion and five CMT1A duplications). Competitive multiplex PCR and MLPA demonstrated reliability and relative speed compared to PCR-RFLP; they were superior to PCR-RFLP for gene dosage quantification. Multiplex PCR and MLPA should be the methods of choice for detection of deletion and duplication genotypes in molecular genetic diagnoses.     

Validation of the Microreader 28A ID System: A 6-dye multiplex amplification assay for forensic application

The Microreader 28A ID System is a new 28-plex genotyping system with 6-dye multiplex amplification, which allows the simultaneous amplification of all 20 Combined DNA Index System (CODIS) core loci (CSF1PO, D3S1358, D5S818, D7S820, D8S1179, D13S317, D16S539, D18S51, D21S11, FGA, TH01, TPOX, vWA, D1S1656, D2S441, D2S1338, D10S1248, D12S391, D19S433, D22S1045), plus five extended STRs loci (D6S1043, Penta D, Penta E, DYS391, SE33), 2 Y-Indels (Rs2032678, Rs771783753), and the amelogenin loci. This system can be used for forensic analyses, such as personal identification, kinship testing, scientific research, database applications, and other aspects of human genetic identification. The validation of the Microreader 28A ID System followed the “Validation Guidelines for DNA Analysis Methods (2016)” described by the Scientific Working Group on DNA Analysis Methods and the regulations published by the China Ministry of Public Security. Our tests included PCR-based studies, sensitivity study, precision and accuracy evaluation, stutter percentage and heterozygous peak height ratio, inhibitor tests, species specificity, and population studies. The validation results suggest that the Microreader 28A ID system is a robust and reliable amplification kit for personal identification, kinship testing, and forensic database applications.     

Chitosan/Ce(IV) redox polymerization‐based amplification for detection of DNA point mutation

Polymerization‐based signal amplification, a technique developed for use in rapid diagnostic tests, hinges on the ability to localize initiators as a function of interfacial binding events. We report here a new DNA detection method in which polymer growth in redox‐polymerization is used as a means to amplify detection signals. The introduction of biotin‐labeled chitosan (biotin‐CS) with highly dense amino groups into the polymerization amplification as macromolecular reducing agent, beneficially simplifies amplification operation, as well as, provides a large amount of initiation points to improve the sensitivity of detection. DNA hybridization, SA and biotin binding reactions led to the attachment of CS on a solid surface where specific DNA sequences were located. With the addition of the mixture containing monomer AM, crosslinker PEGDA and oxidant CAN onto the CS location, the growth of polymer films was triggered to render the corresponding spots readily distinguishable to the naked eye. Direct visualization of 0.21 fmol target DNA molecules of interest was demonstrated. Non‐small cell lung cancer p53 sequence was further selected as a proof‐of‐principle to detect DNA point mutation. The proposed method exhibited an efficient amplification performance for molecule detection, and paved a new way for visual diagnosis of biomolecules. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 1929–1937     

Investigator® Argus X‐12 study on the population of Czech Republic: Comparison of linked and unlinked X‐STRs for kinship analysis

DNA samples of 523 unrelated anonymized individuals (307 males and 216 females) born and living in the Czech Republic were genotyped using Investigator® Argus X‐12 system in the following loci localized in four linkage groups: DXS10148, DXS10135, DXS8378, DXS7132, DXS10079, DXS10074, DXS10103, HPRTB, DXS10101, DXS10146, DXS10134, DXS742. Haplotype frequencies were calculated for each LG (Linkage Group). The frequency of most common haplotype was 0.016, 0.036, 0.042, and 0.023 for LG1, LG2, LG3, and LG4, respectively. The combined power of discrimination was more than 0.999999999 both for female and male samples. The mean exclusion chance was 0.99999999 (trios) and 0.999999 (duos). Informativity and suitability of Investigator® Argus X‐12 for kinship determination was assessed by computing in several female–female duos using LR (Likelihood Ratio) determination for autosomal STR (PowerPlex ESI‐17), linked (Investigator® Argus X‐12 system), and unlinked (X‐STR Decaplex) X‐STR kits. Investigator® Argus X‐12 proved to be very useful for sibship determination, since its LR values were relatively similar to LR for autosomal STR kit. This work presents the first population data for Investigator® Argus X‐12 system in the Czech Republic.     

Precision and accuracy in fluorescent short tandem repeat DNA typing: assessment of benefits imparted by the use of allelic ladders with the AmpF/STR Profiler Plus kit

Base-calling precision of short tandem repeat (STR) allelic bands on dynamic slab-gel electrophoresis systems was evaluated. Data was collected from over 6000 population database allele peaks generated from 468 population database samples amplified with the AmpF/STR Profiler Plus (PP) kit and electrophoresed on ABD 377 DNA sequencers. Precision was measured by way of standard deviations and was shown to be essentially the same, whether using fixed or floating bin genotyping. However, the allelic ladders have proven more sensitive to electrophoretic variations than database samples, which have caused some floating bins of D18S51 to shift on occasion. This observation prompted the investigation of polyacrylamide gel formulations in order to stabilize allelic ladder migration. The results demonstrate that, although alleles comprised in allelic ladders and questioned samples run on the same gel should migrate in an identical manner, this premise needs to be verified for any given electrophoresis platform and gel formulation. We show that the compilation of base-calling data is a very informative and useful tool for assessing the performance stability of dynamic gel electrophoresis systems, stability on which depends genotyping result quality.     

Combination of 768-well microplate array diagonal gel electrophoresis with duplex PCR of X and Y chromosome markers for quality control of epidemiological DNA banks

Large DNA banks for human epidemiological studies have become an increasingly important research tool. The power of genotype-phenotype studies is dependent both on the quality of phenotyping and of genotyping and of correct linking of phenotypes to genotypes. Samples must be tracked through numerous steps between subject or patient and post-genotypic data. Only one phenotype, sex, has a perfect and binary correlation with genotype. In mixed sex studies, it may be advantageous for purposes of quality control to keep sexes mixed during the steps from acquisition to DNA bank, in order to be able to check later for sample swaps. We have designed a duplex PCR combining an amplicon from MAOA marking the X chromosome and an amplicon from DDX3Y marking the Y chromosome. We combined this with a simple economical palmtop sized 768-well microplate compatible electrophoresis system developed in-house for examination of duplex PCR products. We applied this quality control test in the validation of two DNA banks.     

Coupling of an indicator-free electrochemical DNA biosensor with polymerase chain reaction for the detection of DNA sequences related to the apolipoprotein E

This paper describes a disposable indicator-free electrochemical DNA biosensor applied to the detection of apolipoprotein E (apoE) sequences in PCR samples. In the indicator-free assays, the duplex formation was detected by measuring the electrochemical signal of the guanine base of nucleic acids. The biosensor format involved the immobilisation of an inosine-modified (guanine-free) probe onto a screen-printed electrode (SPE) transducer and the detection of the duplex formation in connection with the square-wave voltammetric measurement of the oxidation peak of the guanine of the target sequence.The indicator-free scheme has been characterised using 23-mer oligonucleotides as model: parameters affecting the hybridisation assay such as probe immobilisation conditions, hybridisation time, use of hybridisation accelerators were examined and optimised.The analysis of PCR samples (244 bp DNA fragments, obtained by amplification of DNA extracted from human blood) required a further optimisation of the experimental procedure. In particular, a lower steric hyndrance of the probe modified surface was essential to allow an efficient hybridisation of the target DNA fragment. Negative controls have been performed using the PCR blank and amplicons unrelated to the immobilised probe. A 10 min hybridisation time allowed a full characterisation of each sample.     

Biosensor for Hepatitis B Virus DNA PCR Product and Electrochemical Study of the Interaction of Di(2,2′‐bipyridine)osmium(III) with DNA

The strategy for electrochemical detection of HBV DNA PCR product (181 bps) was designed by covalently immobilizing single‐stranded HBV DNA on preoxidized glassy carbon electrode surface. The immobilization of single stranded DNA was verified by AC impedance spectra. The following hybridization reaction on surface was evidenced by electrochemical methods using [Os(bpy)₂Cl₂]⁺ as an electroactive indicator. The interactions of [Os(bpy)₂Cl₂]⁺ with calf thymus single and double stranded DNA immobilized on preoxidized glassy carbon electrodes were studied. [Os(bpy)₂Cl₂]⁺ could bind preferentially to the duplex DNA by intercalating to base pairs. The intrinsic binding constant of [Os(bpy)₂Cl₂]⁺ with calf thymus DNA was calculated to be 1.21×10⁴ M^?1. Using [Os(bpy)₂Cl₂]⁺ as an electrochemical hybridization indicator, the HBV DNA sensor has been used to detect qualitatively target HBV DNA in solution with high sensitivity and selectivity.     

An effective sequence characterized amplified region‐PCR method derived from restriction site‐amplified polymorphism for the identification of female Schistosoma japonicum of zoonotic significance

In the present study, restriction site‐amplified polymorphism (RSAP) markers were used to examine the genetic variability of Schistosoma japonicum isolates from different endemic provinces in mainland China. Of the 45 pairs of primers screened, 10 RSAP markers showed a clear banding pattern with good resolution; however, only six exhibited a polymorphism among different isolates. Among six RSAP markers, one pair of primers (R8+R10) was able to differentiate male and female parasites, and amplified one constant specific band for female S. japonicum isolates. The specific band was recovered, re‐amplified and sequenced, and a sequence of 162 bp was obtained. Based on this sequence, a pair of specific primers was designed and used to develop sequence characterized amplified region (SCAR)‐PCR assay for identification and differentiation of female S. japonicum isolates. The SCAR‐PCR assay allowed the specific identification of female S. japonicum, with no amplicons being amplified from male S. japonicum, Fasciola hepatica, Clonorchis sinensis, S. mansoni (male and female parasite). DNA sequencing confirmed the identity of the amplified products. The minimum amount of DNA detectable using SCAR‐PCR assay was 0.3 ng for female S. japonicum. The SCAR‐PCR was able to differentiate effectively the male and female S. japonicum worms collected from 12 geographical origins in eight endemic provinces, the gender of which was known based on the morphological and biological features. These results showed that SCAR‐PCR provides an effective tool for the sex differentiation studies of S. japonicum, identification of female S. japonicum, diagnosis and epidemiological survey of S. japonicum infections in animals and human.     

Development of a Novel Electrochemical Biosensor for Detection and Discrimination of DNA Sequence and Single Base Mutation in dsDNA Samples Based on PNA‐dsDNA Hybridization – a new Platform Technology

In spite of the extensive attention paid on the development of various DNA detection strategies, very few studies have been reported regarding direct detection of DNA sequence and mutation in dsDNA. Here, we describe the feasibility of detection and discrimination of target DNA sequences and single base mutations (SBM) directly in double‐stranded oligonucleotides and PCR products without the need for denaturation of the target dsDNA samples. This goal was achieved by employing a peptide nucleic acid (PNA) chain, self‐assembled on the gold electrode as a probe, which binds to dsDNA and forms PNA‐dsDNA hybrid.     

Identification of novel microsatellite markers <1 Mb from the HBB gene and development of a single‐tube pentadecaplex PCR panel of highly polymorphic markers for preimplantation genetic diagnosis of beta‐thalassemia

Beta (β)‐thalassemia is one of the most common monogenic diseases worldwide. Affected pregnancies can be avoided through preimplantation genetic diagnosis (PGD), which commonly involves customized assays to detect the different combinations of β‐globin (HBB) gene mutations present in couples, in conjunction with linkage analysis of flanking microsatellite markers. Currently, the limited number of reported closely linked markers hampers their utility in indirect linkage‐based PGD for this disorder. To increase the available markers closely flanking the HBB gene, an in silico search was performed to identify all markers within 1 Mb flanking the HBB gene. Fifteen markers with potentially high polymorphism information content (PIC) and heterozygosity values were selected and optimized into a single‐tube pentadecaplex PCR panel. Allele frequencies and polymorphism and heterozygosity indices of each marker were assessed in five populations. A total of 238 alleles were observed from the 15 markers. PIC was >0.7 for all markers, with expected heterozygosity and observed heterozygosity values ranging from 0.74 to 0.90 and 0.72 to 0.88, respectively. Greater than 99% of individuals were heterozygous for at least seven markers, with at least two heterozygous markers on either side of the HBB gene. The pentadecaplex marker assay also performed reliably on single cells either directly or after whole genome amplification, thus validating its use in standalone linkage‐based β‐thalassemia PGD or in conjunction with HBB mutation detection.     

Nanomaterial‐based Sensors for the Study of DNA Interaction with Drugs

The interaction of drugs with DNA has been searched thoroughly giving rise to an endless number of findings of undoubted importance, such as a prompt alert to harmful substances, ability to explain most of the biological mechanisms, or provision of important clues in targeted development of novel chemotherapeutics. The existence of some drugs that induce oxidative damage is an increasing point of concern as they can cause cellular death, aging, and are closely related to the development of many diseases. Because of a direct correlation between the response, strength/ nature of the interaction and the pharmaceutical action of DNA‐targeted drugs, the electrochemical analysis is based on the signals of DNA before and after the interaction with the DNA‐targeted drug. Nowadays, nanoscale materials are used extensively for offering fascinating characteristics that can be used in designing new strategies for drug‐DNA interaction detection. This work presents a review of nanomaterials (NMs) for the study of drug‐nucleic acid interaction. We summarize types of drug‐DNA interactions, electroanalytical techniques for evidencing these interactions and quantification of drug and/or DNA monitoring.     

The Development of Pharmacophore Models for the Search of New Natural Inhibitors of SARS-CoV-2 Spike RBD–ACE2 Binding Interface

To date, some succeeding variants of SARS-CoV-2 have become more contagious. This virus is known to enter human cells by binding the receptor-binding domain (RBD) of spike protein with the angiotensin-converting enzyme 2 (ACE2), the latter being a membrane protein that regulates the renin–angiotensin system. Since the host cell receptor plays a critical role in viral entry, inhibition of the RBD–ACE2 complex is a promising strategy for preventing COVID-19 infection. In the present communication, we propose and utilize an approach based on the generation of a complex of pharmacophore models and subsequent Induced Fit Docking (IFD) to identify potential inhibitors of the main binding sites of the Omicron SARS-CoV-2 RBD(S1)–ACE2 complex (PDB ID: 7T9L) among a number of natural products of various types and origins. Several natural compounds have been found to provide a high affinity for the receptor of interest. It is expected that the present results will stimulate further research aimed at the development of specialized drugs against this virus.