Hydrogen‐Bonding Induced Alternate Stacking of Donor (D) and Acceptor (A) Chromophores and their Supramolecular Switching to Segregated States

This paper reports comprehensive studies on the mixed assembly of bis‐(trialkoxybenzamide)‐functionalized dialkoxynaphthalene (DAN) donors and naphthalene‐diimide (NDI) acceptors due the cooperative effects of hydrogen bonding, charge‐transfer (CT) interactions, and solvophobic effects. A series of DAN as well as NDI building blocks have been examined (wherein the relative distance between the two amide groups in a particular chromophore is the variable structural parameter) to understand the structure‐dependent variation in mode of supramolecular assembly and morphology (organogel, reverse vesicle, etc.) of the self‐assembled material. Interestingly, it was observed that when the amide functionalities are introduced to enhance the self‐assembly propensity, the mode of co‐assembly among the DAN and NDI chromophores no longer remained trivial and was dictated by a relatively stronger hydrogen‐bonding interaction instead of a weak CT interaction. Consequently, in a highly non‐polar solvent like methylcyclohexane (MCH), although kinetically controlled CT‐gelation was initially noticed, within a few hours the system sacrificed the CT‐interaction and switched over to the more stable self‐sorted gel to maximize the gain in enthalpy from the hydrogen‐bonding interaction. In contrast, in a relatively less non‐polar solvent such as tetrachloroethylene (TCE), in which the strength of hydrogen bonding is inherently weak, the contribution of the CT interaction also had to be accounted for along with hydrogen bonding leading to a stable CT‐state in the gel or solution phase. The stability and morphology of the CT complex and rate of supramolecular switching (from CT to segregated state) were found to be greatly influenced by subtle structural variation of the building blocks, solvent polarity, and the DAN/NDI ratio. For example, in a given D–A pair, by introducing just one methylene unit in the spacer segment of either of the building blocks a complete change in the mode of co‐assembly (CT state or segregated state) and the morphology (1D fiber to 2D reverse vesicle) was observed. The role of solvent polarity, structural variation, and D/A ratio on the nature of co‐assembly, morphology, and the unprecedented supramolecular‐switching phenomenon have been studied by detail spectroscopic and microscopic experiments in a gel as well as in the solution state and are well supported by DFT calculations.     

Self‐Assembled Architectures with Segregated Donor and Acceptor Units of a Dyad Based on a Monopyrrolo‐Annulated TTF–PTM Radical

An electron donor–acceptor dyad based on a polychlorotriphenylmethyl (PTM) radical subunit linked to a tetrathiafulvalene (TTF) unit through a π‐conjugated N‐phenyl–pyrrole–vinylene bridge has been synthesized and characterized. The intramolecular electron transfer process and magnetic properties of the radical dyad have been evaluated by cyclic voltammetry, UV/Vis spectroscopy, vibrational spectroscopy, and ESR spectroscopy in solution and in the solid state. The self‐assembling abilities of the radical dyad and of its protonated non‐radical analogue have been investigated by X‐ray crystallographic analysis, which revealed that the radical dyad produced a supramolecular architecture with segregated donor and acceptor units in which the TTF subunits were arranged in 1D herringbone‐type stacks. Analysis of the X‐ray data at different temperatures suggests that the two inequivalent molecules that form the asymmetric unit of the crystal of the radical dyad evolve into an opposite degree of electronic delocalization as the temperature decreases.     

Alternating Donor–Acceptor Arrays from Hexa‐peri‐hexabenzocoronene and Benzothiadiazole: Synthesis,Optical Properties,and Self‐Assembly

Donor–acceptor (D–A) structures were obtained by alternating arrays of hexa‐peri‐hexabenzocoronene (HBC) and benzo[c][1,2,5]thiadiazole (BTZ). Optoelectronic investigations revealed a charge transfer due to strong push–pull interactions. 2 D wide‐angle X‐ray scattering (WAXS) data indicated an arrangement in liquid‐crystalline columnar assemblies, in which the π‐stacking distances and molecular orientation depend on the number of HBC units in the molecules.     

An AAA–DDD Triply Hydrogen‐Bonded Complex Easily Accessible for Supramolecular Polymers

For a complementary hydrogen‐bonded complex, when every hydrogen‐bond acceptor is on one side and every hydrogen‐bond donor is on the other, all secondary interactions are attractive and the complex is highly stable. AAA–DDD (A=acceptor, D=donor) is considered to be the most stable among triply hydrogen‐bonded sequences. The easily synthesized and further derivatized AAA–DDD system is very desirable for hydrogen‐bonded functional materials. In this case, AAA and DDD, starting from 4‐methoxybenzaldehyde, were synthesized with the Hantzsch pyridine synthesis and Friedländer annulation reaction. The association constant determined by fluorescence titration in chloroform at room temperature is 2.09×10⁷ M ^?1. The AAA and DDD components are not coplanar, but form a V shape in the solid state. Supramolecular polymers based on AAA–DDD triply hydrogen bonded have also been developed. This work may make AAA–DDD triply hydrogen‐bonded sequences easily accessible for stimuli‐responsive materials.     

A Charge‐Transfer‐Induced Self‐Healing Supramolecular Hydrogel

In this study, a dual‐component charge‐transfer (CT)‐induced supramolecular hydrogel was fabricated using pyrene‐tailored pyridinium (PYP) and 2,4,7‐trinitrofluorenone (TNF) as the electron donor and acceptor, respectively. Its thermal stability and mechanical property have been modulated effectively by altering the concentration or molar ratio of PYP and TNF. Moreover, this CT hydrogel exhibited a distinct injectable self‐healing property that could be utilized to create desired patterns on substrates. Such property holds potential for this CT hydrogel in fields like three‐dimensional printing and surface coating.     

Revealing the Charge‐Transfer Interactions in Self‐Assembled Organic Cocrystals: Two‐Dimensional Photonic Applications

A new crystal of a charge‐transfer (CT) complex was prepared through supramolecular assembly and it has unique two‐dimensional (2D) morphology. The CT nature of the ground and excited states of this new Bpe‐TCNB cocrystal (BTC) were confirmed by electron spin resonance measurements, spectroscopic studies, and theoretical calculations, thus providing a comprehensive understanding of the CT interactions in organic donor–acceptor systems. And the lowest CT₁ excitons are responsible for the efficient photoluminescence (Φ_PL=19 %), which can actively propagate in individual 2D BTCs without anisotropy, thus implying that the optical waveguide property of the crystal is not related to the molecular stacking structure. This unique 2D CT cocrystal exhibits potential for use in functional photonic devices in the next‐generation optoelectronic communications.     

Self‐Assembly of Amphiphilic Nanocrystals

Amphiphilic hybrid materials are formed from polymer‐coated semiconductor nanoparticles that simulate a surfactant‐like response (see picture). The strength and density of the surface coating are the key assembling forces driving a transition from single particles to cylindrical or vesicular superstructures.

     

Supramolecular Hierarchy among Halogen‐Bond Donors

Through a combination of structural chemistry, vibrational spectroscopy, and theory, we have systematically examined the relative structure‐directing importance of a series of ditopic halogen‐bond (XB) donors. The molecular electrostatic potential surfaces of six XB donors were evaluated, which allowed for a charge‐based ranking. Each molecule was then co‐crystallized with 21 XB acceptors and the results have made it possible to map out the supramolecular landscape describing the competition between I/Br–ethynyl donors, perfluorinated I/Br donors, and I/Br–phenyl based donors. The results offer practical guidelines for synthetic crystal engineering driven by robust and directional halogen bonds.     

Reversible Scrolling of Two‐Dimensional Sheets from the Self‐Assembly of Laterally Grafted Amphiphilic Rods

Deep‐water scrolls: It is demonstrated that amphiphilic rods containing lateral flexible chains self‐assemble into two‐dimensional sheets in aqueous solution (see picture). Remarkably, the sheets roll up reversibly into tubular scrolls upon heating, as confirmed by cryo‐transmission electron microscopy and fluorescence microscopy.

     

Interaction of Aromatic Derivatives with Single‐Walled Carbon Nanotubes

Fluorescence of semiconducting single‐walled carbon nanotubes (SWNTs) normally exhibits diameter‐dependent oxidative quenching behaviour. This behaviour can be changed substantially to become an almost diameter‐independent quenching phenomenon in the presence of electron‐withdrawing nitroaromatic compounds, including o‐nitrotoluene, 2,4‐dinitrotoluene, and nitrobenzene. This change is observed for SWNTs suspended either in sodium dodecyl sulfate or in Nafion upon titration with hydrogen peroxide. Benzene, toluene, phenol, and nitromethane do not show such change. These findings suggest the possibility of forming an electron donor–acceptor complex between SWNTs and nitroaromatic compounds, resulting in leveling the redox potential of different SWNT species. The observation appears to provide a new method for modifying the electrochemical potentials of SWNTs through donor–acceptor complex formation.     

Charge‐Transfer‐Assisted Supramolecular 1 D Nanofibers through a Cholesteric Structure‐Directing Agent: Self‐Assembly Design for Supramolecular Optoelectronic Materials

Self‐assembly of pyrene butyric acid (PBA) and 2,4,7‐trinitro‐9H‐fluoren‐9‐one (TNF) directed by a pyridine‐linked cholesterol unit resulted in the formation of a conducting material (1.9472×10^?4 S Cm^?1) due to the formation of 1 D nanofibers. X‐ray diffraction, IR, and atomic force microscopic (AFM) techniques were used to establish the mechanism of the self‐assembly of the multicomponent gels. Results indicate efficient charge transfer in the 1 D nanofibers, assisted by hydrogen bonding.     

Wide‐Range Light‐Harvesting Donor–Acceptor Assemblies through Specific Intergelator Interactions via Self‐Assembly

We have synthesized two new low‐molecular‐mass organogelators based on tri‐p‐phenylene vinylene derivatives, one of which could be designated as the donor whereas the other one is an acceptor. These were prepared specifically to show the intergelator interactions at the molecular level by using donor–acceptor self‐assembly to achieve appropriate control over their macroscopic properties. Intermolecular hydrogen‐bonding, π‐stacking, and van der Waals interactions operate for both the individual components and the mixtures, leading to the formation of gels in the chosen organic solvents. Evidence for intergelator interactions was acquired from various spectroscopic, microscopic, thermal, and mechanical investigations. Due to the photochromic nature of these molecules, interesting photophysical properties, such as solvatochromism and J‐type aggregation, were clearly observed. An efficient energy transfer was exhibited by the mixture of donor–acceptor assemblies. An array of four chromophores was built up by inclusion of two known dyes (anthracene and rhodamine 6G) for the energy‐transfer studies. Interestingly, an energy‐transfer cascade was observed in the assembly of four chromophores in a particular order (anthracene‐donor‐acceptor‐rhodamine 6G), and if one of the components was removed from the assembly the energy transfer process was discontinued. This allowed the build up of a light‐harvesting process with a wide range. Excitation at one end produces an emission at the other end of the assembly.     

Self‐Assembly of Pyridinium‐Functionalized Anthracenes: Molecular‐Skeleton‐Directed Formation of Microsheets and Microtubes

Two amphiphilic regioisomers, 9‐AP (1‐[11‐(9‐anthracenylmethoxy)‐11‐oxoundecyl]pyridinium bromide), and 2‐AP (1‐[11‐(2‐anthracenyl methoxy)‐11‐oxoundecyl]pyridinium bromide), were synthesized and their assembly behaviors were studied. Due to the anisotropic features of the anthracene structure, different substituted positions on the anthracene ring lead 9‐AP and 2‐AP to adapt “shaver” and “spatula”‐like molecular shapes, respectively, which consequently dictate the structure of their final assemblies. While “shaver”‐shaped 9‐AP assembled into microsheets, driven by π–π interactions, “spatula”‐shaped 2‐AP assembled into microtubular structures, promoted primarily by charge‐transfer interactions.