Synthesis,Adsorptive, and Photocatalytic Properties of Carbon Nanotubes/TiO<Subscript>2</Subscript> Nanocomposite Photocatalysts

The carbon nanotubes/TiO₂ (CNTs/TiO₂) composite photocatalysts composed of TiO₂ nanoparticles and multiwalled carbon nanotubes (CNTs) were prepared by a facile hydrothermal method. The photocatalysts were characterized by a range of analytical techniques including X-ray powder diffraction, field emission scanning electron microscope, thermal gravimetric analysis and UV–Vis optical absorption spectra, etc. The amount of TiO₂ nanoparticles growing on CNTs could be tuned by adjusting the dosage of precursor in the reaction solution. Both the adsorptivity and photocatalytic activities of pure CNTs, pure TiO₂, and the CNTs/TiO₂ nanocomposites were tested by the removal of methylene blue from water in dark and under a simulated sunlight, respectively. By comparison, the improved photocatalytic activity of the CNTs/TiO₂ nanocomposite is mainly due to that the CNTs can disperse the active component of TiO₂ nanoparticles, provide a larger the specific surface area, as well as act as an electron sink to accelerate the separation of the photogenerated charges.     

Single-step solvothermal synthesis of mesoporous anatase TiO<Subscript>2</Subscript>-reduced graphene oxide nanocomposites for the abatement of organic pollutants

In the present work, we have fabricated a novel mesoporous TiO₂–rGO nanocomposite by a facile one-step solvothermal method using titanic sulfate as the TiO₂ source. The as-prepared composites were characterized by transmission electron microscopy, X-ray diffraction; UV–Vis diffuse reflectance spectra, X-ray photoelectron spectroscopy and photoluminence spectra. In situ nucleation and anchoring of TiO₂ nanoparticles onto a graphene sheet is favorable fpr forming an intimate interfacial contact, and the chemically bonded TiO₂–rGO nanocomposites commendably enhanced their photocatalytic activity in the photodegradation of rhodamine B and phenol. The high photocatalytic activity of the as-synthesized nanocomposites are primarily ascribed to the mesoporous structure, efficient charge transportation and separation with enhanced visible light absorption, which come from the appealing nanoarchitecture, for instance, ultra-dispersed and ultra-small TiO₂ nanocrystals along with intimate and absolute interfacial contact between the TiO₂ nanocrystals and the graphene sheet.     

Chemical synthesis of Ni/TiO<Subscript>2</Subscript> nanophotocatalyst for UV/visible light assisted degradation of organic dye in aqueous solution

The Ni/TiO₂ nanoparticles with different Ni dopant content were prepared by a modified sol–gel method. The structure and photoinduced charge properties of the as-prepared catalysts were determined using X-ray diffraction, transmission electron microscopy, UV–vis diffuse reflectance spectroscopy and surface photovoltage spectroscopy techniques, and the photocatalytic efficiency of these catalysts was tested using an organic dye. It was shown that Ni modification could greatly enhance the photocatalytic efficiency of these nanocomposite catalysts by taking the photodegradation of methyl orange as a model reaction. With appropriate ratio of Ni and TiO₂, Ni/TiO₂ nanocomposites showed the superior photocatalytic activity than the single TiO₂ nanoparticles. Surface photovoltage spectra demonstrated that Ni modification could effectively inhibit the recombination of the photoinduced electron and holes of TiO₂. This electron–hole pair separation conditions are responsible for the higher photocatalytic performance of Ni/TiO₂ nanocomposites in the visible region of electromagnetic spectrum.     

Enhancement of photocatalytic H<Subscript>2</Subscript> evolution over TiO<Subscript>2</Subscript> nano-sheet films by surface loading NiS nanoparticles

NiS/TiO₂ nano-sheet films (NiS/TiO₂ NSFs) photocatalysts were prepared by loading NiS nanoparticles as noble metal-free cocatalysts on the surface of TiO₂ films through a solvothermal method. The prepared samples were characterized by XRD, SEM, EDS, UV–Vis absorption spectra and XPS analysis. The photocatalytic H₂ evolution and photoluminescence spectroscopy (PL) experiments indicated that the NiS cocatalysts could efficiently promote the separation of photogenerated charge carriers in TiO₂ and consequently enhance the H₂ evolution activity. The hydrogen yield obtained from the optimal sample reached 4.31 μmol cm^–2 at 3.0 h and the corresponding energy efficiency was about 0.26%, which was 21 times higher than that of pure TiO₂ NSF. A possible photocatalytic mechanism of NiS cocatalyst on the improvement of the photocatalytic performance of TiO₂ NSF was also proposed.     

Effect of the method of production of TiO<Subscript>2</Subscript>/CdS nanohetero film structures on the effectiveness of photoinduced charge separation

The properties of TiO₂/CdS nanohetero structures produced by the chemical and photocatalytic deposition of CdS nanoparticles on the surface of nanocrystalline films of TiO₂ under the conditions of laser pulse photolysis were studied. It was shown that in the case of photocatalytically formed TiO₂/CdS nanocomposites the spatial separation of the photogenerated charges between the components of the hetero structure, leading to the formation of intermediates of the photochemical transformations (Ti^III centers in the TiO₂ nanoparticles and S^– radical-anions in the CdS nanoparticles), is an order of magnitude more effective.     

Hydrothermal synthesis of graphene-ZnTiO<Subscript>3</Subscript> nanocomposites with enhanced photocatalytic activities

Pure phase ZnTiO₃ was prepared through a sol–gel process, then graphene-ZnTiO₃ nanocomposites were synthesized by a hydrothermal method using the prepared ZnTiO₃ nanoparticles and graphene oxide as precursors. X-ray diffraction results revealed the production of pure cubic ZnTiO₃ at 600 °C. ZnTiO₃ was anchored on the graphene nanosheets, demonstrating a spherical morphology in transmission electron microscope images. The existence of chemical bond Ti–O–C in the nanocomposites was proved by Fourier-transforming infrared spectroscopy. UV–Vis diffusive reflection spectra indicated that the absorption edge of the nanocomposites shifted towards the visible region. The photocatalytic activity of the composites was tested through the photocatalytic degradation of methyl blue under simulated solar irradiation. The results showed that the photocatalytic activity of the nanocomposites was obviously increased in contrast to pure ZnTiO₃, which was strongly affected by the crystalline structure of ZnTiO₃ and the concentration of graphene. The enhanced photocatalytic activity was mainly attributed to the conglomeration inhibition of ZnTiO₃ nanoparticles, the electron transfer between ZnTiO₃ and graphene and the extended absorption range. Furthermore, other contaminants such as tetracycline, Rhodamine B and methyl orange were tested under the same conditions to investigate the photocatalytic performance of the photocatalysts. The reusability tests indicated that the prepared composites exhibited good stability.     

Synthesis and characterization of TiO<Subscript>2</Subscript>-montmorillonite nanocomposites and their photocatalytic activity

TiO₂ nanoparticles have been synthesized on the surface of exfoliated montmorillonite at a low temperature in benzyl alcohol medium. According to X-ray diffraction (XRD), N₂ adsorption-desorption isotherm and transmisson electron microscopy (TEM), it was found that the intercalation of TiO₂ nanoparticles destroyed the ordered structure of montmorillonite to some extent, and the crystallites of the nanocomposites are assembled to form a house-of-cards structure. The size of the nanoparticles in the interlamellar space is about 4 nm. The nanocomposites exhibited excellent photocatalytic activity in methylene blue degradation due to the synergetic effect of the adsorptive ability to organic compound of cetyl trimethylammonium bromide—montmorillonite and the catalytic ability of TiO₂ nanoparticles in it.     

Charge separation by tetrahexahedron-SrTiO<Subscript>3</Subscript>/TiO<Subscript>2</Subscript> heterojunction as an efficient photocatalyst

Charge separation plays a key role in the conversion of solar energy into chemical energy for use in the redox reaction and as well as in the photocatalytic activity. In this study, SrTiO₃ particles with different morphologies including irregular, tetrahexahedron, and cube were synthesized by an in situ solvothermal method. The photocatalytic activity of the synthesized nanoparticles was investigated in the photocatalytic decomposition of methylene blue under UV light irradiation. Tetrahexahedron SrTiO₃ particles exhibited high decomposition activity (70 %), which is about two times higher than those of the irregular and cubic SrTiO₃ particles. The high decomposition activity of tetrahexahedron SrTiO₃ particles could be attributed to the improvement of charge separation achieved on different crystal facets. To reach a good charge separation, tetrahexahedron SrTiO₃/TiO₂ coupled nanoparticles were fabricated by impregnation method. Results showed that coupling tetrahexahedron SrTiO₃ with TiO₂ could produce efficient charge separation between tetrahexahedron SrTiO₃ and TiO₂ due to their matched band edges. In order to achieve better charge separation, the tetrahexahedron SrTiO₃/90 %TiO₂ sample was calcined at different temperatures in the 450–750 °C range. Tetrahexahedron SrTiO₃/90 %TiO₂ coupled nanoparticles calcined at 650 °C show high photocatalytic activity compared with other samples. The prepared samples were characterized by using various techniques such as X-ray diffraction, scanning electron microscopy, photoluminescence emission spectra, and UV–Vis diffuse reflectance spectroscopy.     

Preparation of ZnFe<Subscript>2</Subscript>O<Subscript>4</Subscript> nanoparticles by mechanical alloying and annealing for sensitizing C-modified TiO<Subscript>2</Subscript> and acquirement of efficient photocatalyst

ZnFe₂O₄ nanoparticles sensitized by C-modified TiO₂ hybrids (ZnFe₂O₄–TiO₂/C) were successfully prepared by a feasible method. The ZnFe₂O₄ nanoparticles were prepared by mechanical alloying and annealing. The residual organic compounds in the synthetic process of TiO₂ were selected as the carbon source. The as-prepared composites were characterized by X-ray diffraction, Raman spectroscopy, X-ray fluorescence, transmission electron microscopy, X-ray photoelectron spectroscopy, ultraviolet–visible light diffuse reflectance spectroscopy (UV–Vis) and N₂ adsorption–desorption analysis. The photocatalytic activity of the photocatalysts was measured by degradation of methyl orange under ultraviolet (UV) light and simulated solar irradiation, respectively. The results show that the carbon did not enter the TiO₂ lattice but adhered to the surface of TiO₂. The photocatalytic activity of the as-prepared C-modified TiO₂ (TiO₂/C) improved both under UV and simulated solar light irradiation, but the improvement was not dramatic. Introduction of ZnFe₂O₄ into the TiO₂/C could enhance the absorption spectrum range. The ZnFe₂O₄–TiO₂/C hybrids exhibited a higher photocatalytic activity both than that of the pure TiO₂ and TiO₂/C under either UV or simulated solar light irradiation. The complex synergistic effect plays an important role in improving the photocatalytic performance of ZnFe₂O₄–TiO₂/C composites. The optimum photocatalytic performance was obtained from the ZnFe₂O₄(0.8 wt%)–TiO₂/C sample.     

Photocatalytic effect of nano-TiO<Subscript>2</Subscript> loaded cement on dye decolorization and <Emphasis Type="Italic">Escherichia coli</Emphasis> inactivation under UV irradiation

In the present study, titanium dioxide (TiO₂) nano-particles were synthesized by sol–gel technique and then used to provide nano-TiO₂ loaded cement samples at 1, 5, and 10 wt% for investigation of Malachite green pigment decomposition and Escherichia coli inactivation under UV irradiation. Surveys conducted on the synthesized TiO₂ nano-particles showed a 100 % anatase phase with a mean particle size of 66.5 nm, surface area of 64.352 m² g^?1, and a porosity volume of 0.1278 cm³ g^?1. Cement samples containing this catalyst exhibited stronger photocatalytic properties as compared to the same amount of pure catalyst. Considering both photocatalytic performance and cost of catalyst, 5 wt% titanium dioxide was suggested to be added to cement. By addition of 1 wt% polycarboxylic copolymer as super-plasticizer to the cement paste, the photocatalytic sample activities were reinforced so that a similar performance could be obtained at 1 wt% catalyst as compared to 5 wt% catalyst without super-plasticizer.     

Flower-like Au/Ag/TiO<Subscript>2</Subscript> nanocomposites with enhanced photocatalytic efficiency under visible light irradiation

Uniform flower-like TiO₂ coated Au nanostars and core-shell Au@Ag nanostars with different amounts of Ag coating were prepared through a facile method by hydrolysis of TiF₄ under an acidic environment. The photocatalytic capability of these flower-like nanocomposites under visible light irradiation was found to be enhanced by up to 4.7-fold compared to commercial P25 TiO₂ nanoparticles. The enhanced photocatalytic activity was ascribed to improved light absorption and hot electron injection from the photo-excited Au@Ag core to the TiO₂ shell.     

Photocatalytic degradation of organic compounds in aqueous systems by Fe and Ho codoped TiO<Subscript>2</Subscript>

Undoped, single-doped, and codoped TiO₂ nanoparticles were prepared by the sol-gel method and characterized with X-ray diffraction (XRD), the Brunauer-Emmett-Teller (BET)-specific surface area (S_BET), UV-Vis absorption spectra (UV-Vis), and X-ray photoelectron spectroscopy (XPS). Their photocatalytic activity was evaluated by methyl orange (MO) degradation in an aqueous suspension under UV or simulated solar light illumination. XRD showed that all samples calcined at 600°C preserved the anatase structure, and doping inhibited the increase of crystallite size. The BET result revealed that doping improved the surface area of TiO₂. UV-Vis indicated that Fe³⁺-doping broadened the absorption profile of TiO₂. XPS demonstrated that doping was advantageous to absorb more surface hydroxyl groups or chemisorbed water molecules. Photocatalytic degradation showed that the photocatalytic activity of TiO₂ codoped with Fe³⁺ and Ho³⁺ ions was markedly improved. This was ascribed to the fact that there was a cooperative action in the two doped elements. Fe³⁺-doping broadens the absorption profile, improves photo utilization of TiO₂, and then generates more electronhole pairs. Ho³⁺-doping restrains the increase in grain size and retards the recombination of photo-generated electrons and holes.     

Elaboration of nano titania-magnetic reduced graphene oxide for degradation of tartrazine dye in aqueous solution

In this paper, magnetic nanocomposites are synthesized by loading reduced graphene oxide (RG) with two components of nanoparticles consisting of titanium dioxide (TiO₂) and magnetite (Fe₃O₄) with varying amounts. The structural and magnetic features of the prepared composite photocatalysts were investigated by powder X-ray diffraction (XRD), Fourier transform infrared spectra (FT-IR), transmission electron microscopy (TEM), UV–vis diffuse reflectance spectra (UV–vis/DRS), Raman and vibrating sample magnetometer (VSM). The resulting TiO₂/magnetite reduced graphene oxide (MRGT) composite demonstrated intrinsic visible light photocatalytic activity, on degradation of tartrazine (TZ) dye from a synthetic aqueous solution. Specifically, it exhibits higher photocatalytic activity than magnetite reduced graphene oxide (MRG) and TiO₂ nanoparticles. The photocatalytic degradation of TZ dye when using MRG and TiO₂ for 3 h under visible light was 35% and 10% respectively, whereas for MRGT it was more than 95%. The higher photocatalytic efficiency of MRGT is due to the existence of reduced graphene oxide and magnetite which enhances the photocatalytic efficiency of the composite in visible light towards the degradation of harmful soluble azo dye (tartrazine).     

Catalytic Properties of TiO<Subscript>2</Subscript>/Fe<Subscript>3</Subscript>O<Subscript>4</Subscript> Nanoparticles in Plasma Chemical Treatment

We proposed here a new process coupling dielectric barrier discharge (DBD) plasma with magnetic photocatalytic material nanoparticles for improving yield in DBD degradation of methyl orange (MO). TiO₂ doped Fe₃O₄ (TiO₂/Fe₃O₄) was prepared by the sol-gel method and used as a new type of magnetic photocatalyst in DBD system. It was found that the introduction of TiO₂/Fe₃O₄ in DBD system could effectively make use of the energy generated in DBD process and improve hydroxyl radical contributed by the main surface Fenton reaction, photocatalytic reaction and catalytic decomposition of dissolved ozone. Most part of MO (88%) was degraded during 30 min at peak voltage of 13 kV and TiO₂/Fe₃O₄ load of 100 mg/L, with a rate constant of 0.0731 min^?1 and a degradation yield of 7.23 g/(kW h). The coupled system showed higher degradation efficiency for MO removal.     

TiO<Subscript>2</Subscript>/SiO<Subscript>2</Subscript> hybrid nanomaterials: synthesis and variable UV-blocking properties

Silica and core–shell structured titania/silica (TiO₂/SiO₂) nanoparticles with particles size ranging from tens to hundreds of nanometers were prepared and deposited onto cotton fabric substrates by sol–gel process. The morphologies of the nanoparticles were characterized by field-emission scanning electron microscope (FE-SEM). The photocatalytic decomposition properties as well as UV-blocking properties of the fabrics treated with SiO₂ and TiO₂/SiO₂ nanoparticles were investigated.     

Synthesis,characterisation and photocatalytic activity of Ag<Superscript>+</Superscript>- and Sn<Superscript>2+</Superscript>-substituted KSbTeO<Subscript>6</Subscript>

Ag⁺- and Sn²⁺-substituted KSbTeO₆ were prepared by a facile ion-exchange method at ambient temperature. All the samples were characterised by scanning electron microscopy, energy-dispersive spectra, thermogravimetric analysis, powder X-ray diffraction, Raman spectra and UV-VIS diffuse reflectance spectra. Both Sn²⁺- and Ag⁺-substituted KSbTeO₆ were crystallised in a cubic lattice with the \(Fd\bar 3m\) space group. The band-gap energy of all the samples was deduced from their UV-VIS diffuse reflectance spectral profiles. The visible light-induced photocatalytic oxidation of the methylene blue (MB) dye was examined in the presence of all the as-prepared materials. The Ag⁺- and Sn²⁺-substituted KSbTeO₆ exhibited a higher photocatalytic activity than the parent KSbTeO₆ in degradation of the MB dye under visible light irradiation.     

Influence of NH<Subscript>3</Subscript>-treating temperature on visible light photocatalytic activity of N-doped P<Subscript>25</Subscript>-TiO<Subscript>2</Subscript>

The influence of NH₃-treating temperature on the visible light photocatalytic activity of N-doped P₂₅-TiO₂ as well as the relationship between the surface composition structure of TiO₂ and its visible light photocatalytic activity were investigated. The results showed that N-doped P₂₅-TiO₂ treated at 600°C had the highest activity. The structure of P₂₅-TiO₂ was converted from anatase to rutile at 700°C. Moreover, no N-doping was detected at the surface of P₂₅-TiO₂. There was no simply linear relationship between the visible light photocatalytic activity and the concentration of doped nitrogen, and visible light absorption. The visible light photocatalytic activity of N-doped P₂₅-TiO₂ was mainly influenced by the synergistic action of the following factors: (i) the formation of the single-electron-trapped oxygen vacancies (denoted as V_o^·); (ii) the doped nitrogen on the surface of TiO₂; (iii) the anatase TiO₂ structure.     

Direct Synthesis of Hexagonal NaGdF4 Nanocrystals from a Single‐Source Precursor: Upconverting NaGdF4:Yb3+,Tm3+ and Its Composites with TiO2 for Near‐IR‐Driven Photocatalysis

A novel single‐source precursor NaGd(TFA)₄(diglyme) (TFA=trifluoroacetate) was synthesized, characterized thoroughly, and used to obtain the hexagonal phase of NaGdF₄ nanoparticles as an efficient matrix for lanthanide‐doped upconverting nanocrystals (NCs) that convert near‐infrared radiation into shorter‐wavelength UV/visible light. These NCs were then used to prepare well‐characterized TiO₂@NaGdF₄:Yb³⁺,Tm³⁺ nanocomposites to extend the absorption range of the TiO₂ photocatalyst from the UV to the IR region. While the visible/near IR part of the photoluminescent spectra remains almost unaffected by the presence of TiO₂, the UV part is strongly quenched due to the absorption of TiO₂ above its gap at approximately 380 nm by energy transfer or FRET. Preliminary results on the photocatalytic activity of the above obtained nanocomposites are presented.     

Study of the Efficiency of UV and Visible‐Light Photocatalytic Oxidation of Methanol on Mesoporous RuO2–TiO2 Nanocomposites

Mesoporous RuO₂–TiO₂ nanocomposites at different RuO₂ concentrations (0–10 wt %) are prepared through a simple one‐step sol–gel reaction of tetrabutyl orthotitanate with ruthenium(III) acetylacetonate in the presence of an F127 triblock copolymer as structure‐directing agent. The thus‐formed RuO₂–TiO₂ network gels are calcined at 450 °C for 4 h leading to mesoporous RuO₂–TiO₂ nanocomposites. The photocatalytic CH₃OH oxidation to HCHO is chosen as the test reaction to examine the photocatalytic activity of the mesoporous RuO₂–TiO₂ nanocomposites under UV and visible light. The photooxidation of CH₃OH is substantially affected by the loading amount and the degree of dispersion of RuO₂ particles onto the TiO₂, which indicates the exclusive effect of the RuO₂ nanoparticles on this photocatalytic reaction under visible light. The measured photonic efficiency ξ=0.53 % of 0.5 wt % RuO₂–TiO₂ nanocomposite for CH₃OH oxidation is maximal and the further increase of RuO₂ loading up to 10 wt % gradually decreases this value. The cause of the visible‐light photocatalytic behavior is the incorporation of small amounts of Ru⁴⁺ into the anatase lattice. On the other hand, under UV light, undoped TiO₂ shows a very good photonic efficiency, which is more than three times that for commercial photocatalyst, P‐25 (Evonik–Degussa); however, addition of RuO₂ suppresses the photonic efficiency of TiO₂. The proposed reaction mechanism based on the observed behavior of RuO₂–TiO₂ photocatalysts under UV and visible light is explored.     

Two Organic–Inorganic Hybrid 3D {P5W30}‐Based Heteropolyoxotungstates with Transition‐Metal/Ln–Carboxylate–Ln Connectors

Two unique organic–inorganic hybrid polyoxometalates constructed from Preyssler‐type [Na(H₂O)P₅W₃₀O₁₁₀]^14? ({P₅W₃₀}) subunits and TM/Ln–carboxylate–Ln connectors (TM=transition metal, Ln=lanthanide), KNa₇[{Sm₆Mn(μ‐H₂O)₂(OCH₂COO)₇(H₂O)₁₈}{Na(H₂O)P₅W₃₀O₁₁₀}] ? 22 H₂O ( 1 ) and K₄[{Sm₄Cu₂(gly)₂(ox)(H₂O)₂₄}{NaP₅W₃₀O₁₁₀}]Cl₂ ? 25 H₂O ( 2 ; gly=glycine, ox=oxalate) have been hydrothermally synthesized and characterized by elemental analyses, IR spectra, UV/Vis‐NIR spectra, thermogravimetric analyses, power X‐ray diffraction, and single‐crystal X‐ray diffraction. Compound 1 displays one interesting 3D framework built by three types of subunits, {P₅W₃₀}, [Sm₂Mn(μ‐H₂O)₂(OCH₂COO)₂(H₂O)₅]⁴⁺, and [Sm₄(OCH₂COO)₅ (H₂O)₁₃]²⁺, whereas 2 also manifests the other intriguing 3D architecture created by three types of subunits, {P₅W₃₀}, [SmCu(gly)(H₂O)₈]⁴⁺, and [Sm₂(ox)(H₂O)₈]⁴⁺. To our knowledge, 1 and 2 are the first 3D frameworks that contain {P₅W₃₀} units and TM/Ln–carboxylate–Ln connectors. The fluorescent properties of 1 and 2 have been investigated.