Discrete π‐Stacks from Self‐Assembled Perylenediimide Analogues

The formation of well‐defined finite‐sized aggregates represents an attractive goal in supramolecular chemistry. In particular, construction of discrete π‐stacked dye assemblies remains a challenge. Reported here is the design and synthesis of a novel type of discrete π‐stacked aggregate from two comparable perylenediimide (PDI) dyads ( PEP and PBP ). The criss‐cross PEP ‐ PBP dimers in solution and ( PBP ‐ PEP )‐( PEP ‐ PBP ) tetramers in the solid state are well elucidated using single‐crystal X‐ray diffraction, dynamic light scattering, and diffusion‐ordered NMR spectroscopy. Extensive π–π stacking between the PDI units of PEP and PBP as well as repulsive interactions of swallow‐tailed alkyl substituents are responsible for the selective formation of discrete dimer and tetramer stacks. Our results reveal a new approach to preparing discrete π stacks that are appealing for making assemblies with well‐defined optoelectronic properties.     

Phenylene Ethynylene‐Tethered Perylene Bisimide Folda‐Dimer and Folda‐Trimer: Investigations on Folding Features in Ground and Excited States

In this work, we have elucidated in detail the folding properties of two perylene bisimide (PBI) foldamers composed of two and three PBI units, respectively, attached to a phenylene ethynylene backbone. The folding behaviors of these new PBI folda‐dimer and trimer have been studied by solvent‐dependent UV/Vis absorption and 1D and 2D NMR spectroscopy, revealing facile folding of both systems in tetrahydrofuran (THF). In CHCl₃ the dimer exists in extended (unfolded) conformation, whereas partially folded conformations are observed in the trimer. Temperature‐dependent ¹H NMR spectroscopic studies in [D₈]THF revealed intramolecular dynamic processes for both PBI foldamers due to, on the one hand, hindered rotation around C?N imide bonds and, on the other hand, backbone flapping; the latter process being energetically more demanding as it was observed only at elevated temperature. The structural features of folded conformations of the dimer and trimer have been elucidated by different 2D‐NMR spectroscopy (e.g., ROESY and DOSY) in [D₈]THF. The energetics of folding processes for the PBI dimer and trimer have been assessed by calculations applying various methods, particularly the semiempirical PM6‐DH2 and the more sophisticated B97D approach, in which relevant dispersion corrections are included. These calculations corroborate the results of NMR spectroscopic studies. Folding features in the excited states of these PBI foldamers have been characterized by using time‐resolved fluorescence and transient absorption spectroscopy in THF and CHCl₃, exhibiting similar solvent‐dependent behavior as observed for the ground state. Interestingly, photoinduced electron transfer (PET) process from electron‐donating backbone to electron‐deficient PBI core for extended, but not for folded, conformations was observed, which can be explained by a fast relaxation of excited PBI stacks in the folded conformation into fluorescent excimer states.     

Photocontrol Over Self‐Assembled Nanostructures of π–π Stacked Dyes Supported by the Parallel Conformer of Diarylethene

Diarylethenes (DAEs) have rarely been used in the design of photoresponsive supramolecular assemblies with a well‐defined morphology transition owing to rather small structural changes upon photoisomerization. A supramolecular design based on the parallel conformation of DAEs enables the construction of photoresponsive dye assemblies that undergo remarkable nanomorphology transitions. The cooperative stacking of perylene bisimide (PBI) dyes was used to stabilize the parallel conformer of DAE through complementary hydrogen bonds. Atomic force microscopy, UV/Vis spectroscopy, and molecular modeling revealed that our DAE and PBI building blocks coassembled in nonpolar solvent to form well‐defined helical nanofibers featuring J‐type dimers of PBI dyes. Upon irradiating the coassembly solution with UV and visible light in turn, a reversible morphology change between nanofibers and nanoparticles was observed. This system involves the generation of a new self‐assembly pathway by means of photocontrol.     

Folding‐Induced Modulation of Excited‐State Dynamics in an Oligophenylene–Ethynylene‐Tethered Spiral Perylene Bisimide Aggregate

The excited‐state photophysical behavior of a spiral perylene bisimide (PBI) folda‐octamer ( F8 ) tethered to an oligophenylene–ethynylene scaffold is comprehensively investigated. Solvent‐dependent UV/Vis and fluorescence studies reveal that the degree of folding in this foldamer is extremely sensitive to the solvent, thus giving rise to an extended conformation in CHCl₃ and a folded helical aggregate in methylcyclohexane (MCH). The exciton‐deactivation dynamics are largely governed by the supramolecular structure of F8 . Femtosecond transient absorption (TA) in the near‐infrared region indicates a photoinduced electron‐transfer process from the backbone to the PBI core in the extended conformation, whereas excitation power‐ and polarization‐dependent TA measurements combined with computational modeling showed that excitation energy transfer between the unit PBI chromophores is the major deactivation pathway in the folded counterpart.     

Two-step anti-cooperative self-assembly process into defined π-stacked dye oligomers: insights into aggregation-induced enhanced emission

Aggregation-induced emission enhancement (AIEE) phenomena received great popularity during the last decade but in most cases insights into the packing structure – fluorescence properties remained scarce. Here, an almost non-fluorescent merocyanine dye was equipped with large solubilizing substituents, which allowed the investigation of it''s aggregation behaviour in unpolar solvents over a large concentration range (10⁻² to 10⁻⁷ M). In depth analysis of the self-assembly process by concentration-dependent UV/Vis spectroscopy at different temperatures revealed a two-step anti-cooperative aggregation mechanism. In the first step a co-facially stacked dimer is formed driven by dipole–dipole interactions. In a second step these dimers self-assemble to give an oligomer stack consisting of about ten dyes. Concentration- and temperature-dependent UV/Vis spectroscopy provided insight into the thermodynamic parameters and allowed to identify conditions where either the monomer, the dimer or the decamer prevails. The centrosymmetric dimer structure could be proven by 2D NMR spectroscopy. For the larger decamer atomic force microscopy (AFM), diffusion ordered spectroscopy (DOSY) and vapour pressure osmometric (VPO) measurements consistently indicated that it is of small and defined size. Fluorescence, circular dichroism (CD) and circularly polarized luminescence (CPL) spectroscopy provided insights into the photofunctional properties of the dye aggregates. Starting from an essentially non-fluorescent monomer (Φ_Fl = 0.23%) a strong AIEE effect with excimer-type fluorescence (large Stokes shift, increased fluorescence lifetime) is observed upon formation of the dimer (Φ_Fl = 2.3%) and decamer (Φ_Fl = 4.5%) stack. This increase in fluorescence is accompanied for both aggregates by an aggregation-induced CPL enhancement with a strong increase of the g_lum from ∼0.001 for the dimer up to ∼0.011 for the higher aggregate. Analysis of the radiative and non-radiative decay rates corroborates the interpretation that the AIEE effect originates from a pronounced decrease of the non-radiative rate due to π–π-stacking induced rigidification that outmatches the effect of the reduced radiative rate that originates from the H-type exciton coupling in the co-facially stacked dyes.

The self-assembly of a dipolar merocyanine into preferred dimers and small-sized chiral aggregates leads to enhanced emission due to a reduced non-radiative rate as well as amplified circular polarized luminescence.     

Exciton‐Vibrational Couplings in Homo‐ and Heterodimer Stacks of Perylene Bisimide Dyes within Cyclophanes: Studies on Absorption Properties and Theoretical Analysis

The optical properties of a series of three cyclophanes comprising either identical or different perylene bisimide (PBI) chromophores were studied by UV/Vis absorption spectroscopy and their distinctive spectral features were analyzed. All the investigated cyclophanes show significantly different absorption features with respect to the corresponding constituent PBI monomers indicating strong coupling interactions between the PBI units within the cyclophanes. DFT calculations suggest a π‐stacked arrangement of the PBI units at close van der Waals distance in the cyclophanes with rotational displacement. Simulations of the absorption spectra based on time‐dependent quantum mechanics properly reproduced the experimental spectra, revealing exciton‐vibrational coupling between the chromophores both in homo‐ and heterodimer stacks. The PBI cyclophane comprising two different PBI chromophores represents the first example of a PBI heterodimer stack for which the exciton coupling has been investigated. The quantum dynamics analysis reveals that exciton coupling in heteroaggregates is indeed of similar strength as for homoaggregates.     

Host–Guest Interactions of Phosphorescent Molecular Tweezers Based on an Alkynylplatinum(II) Terpyridine System with Polyaromatic Hydrocarbons

Host–guest interactions of a molecular tweezer complex 1 with various planar organic molecules including polyaromatic hydrocarbons (PAHs) were investigated by 1D and 2D ¹H NMR spectroscopy, UV/Vis absorption and emission titration studies. 2D and DOSY NMR spectroscopies support the sandwiched binding mode based on 1:1 host–guest interactions. The binding constants (K_S) of complex 1 for various PAHs were determined by NMR titration studies and the values were found to span up to an order of 10⁴ M ^?1 for coronene to no observable interaction for benzene, indicating that the π‐surface area is important for such host–guest interactions. The substituent effect on the host–guest interaction based on the guest series of 9‐substituted anthracenes was also studied. In general, a stronger interaction was observed for the anthracene guest with electron‐donating groups, although steric and π‐conjugation factors cannot be completely excluded. The photophysical responses of complex 1 upon addition of various PAHs were measured by UV/Vis and emission titration studies. The UV/Vis absorption spectra were found to show a drop in absorbance of the metal‐to‐ligand charge‐transfer (MLCT) and ligand‐to‐ligand charge‐transfer (LLCT) admixture band upon addition of various guest molecules to 1 , whereas the emission behavior was found to change differently depending on the guest molecules, showing emission enhancement and/or quenching. It was found that emission quenching occurred either via energy transfer or electron transfer pathway or both, while emission enhancement was caused by the increase in rigidity of complex 1 as a result of host–guest interaction.     

Photoresponsive Formation of an Intermolecular Minimal G‐Quadruplex Motif

The ability of three different bifunctional azobenzene linkers to enable the photoreversible formation of a defined intermolecular two‐tetrad G‐quadruplex upon UV/Vis irradiation was investigated. Circular dichroism and NMR spectroscopic data showed the formation of G‐quadruplexes with K⁺ ions at room temperature in all three cases with the corresponding azobenzene linker in an E conformation. However, only the para–para‐substituted azobenzene derivative enables photoswitching between a nonpolymorphic, stacked, tetramolecular G‐quadruplex and an unstructured state after E–Z isomerization.     

Pentadecyl phenol- and cardanol-functionalized fluorescent, room-temperature liquid-crystalline perylene bisimides: effect of pendant chain unsaturation on self-assembly

A new perylene bisimide (PBI) building block based on pentadecyl phenol (PDP) or cardanol was developed, which upon esterification with 3,4,5-tridodecyloxy gallate resulted in highly emissive, room-temperature liquid-crystalline (LC) molecules. The self assembly in solution was studied in detail by NMR spectroscopy, UV/Vis absorption, and fluorescence spectroscopy. In solution both PDP- and cardanol-based PBI exhibited similar behavior. They were molecularly dissolved in chloroform (CHCl(3)) but formed rotationally displaced H-type aggregates that emitted at 640 nm in methylcyclohexane (MCH). Surface morphology in dropcast films were characterized using microscopic techniques such as SEM, TEM, and atomic force microscopy (AFM). The liquid-crystalline properties were studied using differential scanning calorimetry (DSC), polarized light microscopy (PLM), and variable-temperature X-ray (small-angle X-ray scattering (SAXS) and wide-angle X-ray diffraction (WXRD)) studies. Variable-temperature X-ray studies in the LC phase indicated strong π-π stacking interaction present in the PDP-based PBI derivative, whereas the stacking was absent in the LC phase of the cardanol-based PBI. The latter formed self-organized structures of extremely short length due to the presence of cis double bonds in the C15 alkyl side chain, whereas the saturated alkyl side chain in PDP could pack efficiently, thereby resulting in nanofibers that were several micrometers in length.     

Characterization of a novel water-soluble 3,4,9,10-perylenetetracarboxylic diimide in solution and in self-assembled zirconium phosphonate thin films

The properties of N,N'-bis(2-phosphonoethyl)-3,4,9,10-perylenetetracarboxylic diimide (PPDI), a water-soluble perylene dye, have been studied in solution and in thin films. Absorption spectra showed that PPDI exists in the monomeric form in water/ethanol (1:1) and water/dimethyl sulfoxide (DMSO) (3:7) mixtures, but forms dimers in water and higher aggregates in ethanol. The PPDI monomer is highly fluorescent, in contrast to the dimers and aggregates, which are nonfluorescent. The monomer/dimer equilibrium was conveniently followed in a water/ethanol (7:3) mixture by varying the dye concentration. An equilibrium constant of K = 1.25 x 10(5) M(-1) was estimated for the dimerization process in this solvent mixture. The addition of cetyl trimethylammonium bromide (CTAB), a cationic surfactant, to aqueous solutions of PPDI resulted in the dissociation of the dimers, showing that the dye was incorporated into the micellar phase. Self-assembled thin films of PPDI were grown on both silica gel particles and flat surfaces, using zirconium phosphonate chemistry. The growth of multilayered films on flat surfaces was monitored by ellipsometry (silicon substrates) and UV/Vis spectroscopy (quartz slides), and was linear with the number of deposition cycles. No fluorescence was detected from the PPDI films, and the absorption spectra of the films were quite similar to the spectrum of the compound in ethanol, indicating that the dye molecules were stacked in the films. Mixed monolayers containing PPDI and N,N'-bis(2-phosphonoethyl)-1,4,5,8-naphthalenediimide (PNDI) on quartz were also prepared. Monolayers obtained by codeposition from solutions containing both PPDI and PNDI were richer in PPDI, even when the solution contained a large excess of the naphthalene derivative, showing that pi-stacking of PPDI is an important driving force in the formation of the films.     

Optical,Electrochemical, and Magnetic Properties of Pyrrole‐ and Thiophene‐Bridged 5,15‐Diazaporphyrin Dimers

The first examples of pyrrole‐ and thiophene‐bridged 5,15‐diazaporphyrin (DAP) dimers are prepared through Stille coupling reactions of nickel(II) and copper(II) complexes of 3‐bromo‐10,20‐dimesityl‐5,15‐diazaporphyrin (mesityl=2,4,6‐trimethylphenyl) with the respective 2,5‐bis(tributylstannyl)heteroles. The effects of the heterole spacers and meso nitrogen atoms on the optical, electrochemical, and magnetic properties of the DAP dimers are investigated by UV/Vis absorption spectroscopy, density functional theory calculations, magnetic circular dichroism spectroscopy, cyclic voltammetry, and EPR spectroscopy. The heterole spacers are found to have a significant impact on the electronic transitions over the entire π‐system. In particular, the pyrrole‐bridged DAP dimers exhibit high light‐harvesting potential in the low‐energy visible/near‐infrared region owing to the intrinsic charge‐transfer character of the lowest excitation.     

Homochiral [2.2]Paracyclophane Self‐Assembly Promoted by Transannular Hydrogen Bonding

[2.2]paracyclophane (pCp), unlike many π‐building blocks, has been virtually unexplored in supramolecular constructs. Reported here is the synthesis and characterization of the first pCp derivatives capable of programmed self‐assembly into extended cofacial π‐stacks in solution and the solid state. The design employs transannular (intramolecular) hydrogen bonds (H‐bonds), hitherto unstudied in pCps, between pseudo‐ortho‐positioned amides of a pCp‐4,7,12,15‐tetracarboxamide (pCpTA) to preorganize the molecules for intermolecular H‐bonding with π‐stacked neighbors. X‐ray crystallography confirms the formation of homochiral, one‐dimensional pCpTA stacks helically laced with two H‐bond strands. The chiral sense is dictated by the planar chirality (R_p or S_p) of the pCpTA monomers. A combination of NMR, IR, and UV/Vis studies confirms the formation of the first supramolecular pCp polymers in solution.     

Dimeric Calixarenes: A New Family of Major‐Groove Binders

A new class of potent DNA binding agents is presented. Dimeric calix[4]arenes with cationic groups at their upper rims and flexible alkyl bridges can be synthesized from triply acyl‐protected calix[4]arene tetramines in relatively short synthetic sequences (3–5 steps). The compounds attach themselves to double‐stranded nucleic acids in a noncovalent fashion, with micro‐ to nanomolar affinities. Guanidinium headgroups with their extended hydrogen‐bonding “fingers” are more powerful than ammonium groups, and the benzylamine series is superior to the anilinium series (see below). The new ligands easily distinguish between RNA and various DNA types, and produce characteristic changes in UV/Vis, fluorescence, CD, as well as NMR spectra. Especially extended oligonucleotides of more than 100 base pairs are bound with affinities increasing from RNA (10 μM K_d)<AT‐rich (1 μM )<GC‐rich DNA double strands (100–10 nM ). Ethidium bromide displacement studies confirm this order. CE₅₀ values are remarkably low (1–4 μM ), and are more than 300 times lower than that of spermine, which is a typical backbone binder. Stoichiometries are rather high (one calixarene dimer per two BP), suggesting a potential aggregation of bound ligands inside the major groove. Most UV/Vis melting curves display an inverted shape, and start from drastically enhanced absorption intensities for the DNA complexes. DAPI displacement studies prove that up to one equivalent of calixarene dimer can be accommodated in the dye‐loaded DNA. RNA complexation by calixarene dimers is accompanied by a drastic CD spectral transition from the typical A‐form to a perfect B‐signature, providing further experimental evidence for major‐groove binding. The orientation of the ligands can be deduced from NMR titrations and is reproduced in Monte‐Carlo simulations on 1:1 complexes in water.     

Dissymmetrical U‐Shaped π‐Stacked Supramolecular Assemblies by Using a Dinuclear CuI Clip with Organophosphorus Ligands and Monotopic Fully π‐Conjugated Ligands

Reactions between the U‐shaped binuclear Cu^I complex A that bears short metal–metal distances and the cyano‐capped monotopic π‐conjugated ligands 1 – 5 that carry gradually bulkier polyaromatic terminal fragments lead to the formation of π‐stacked supramolecular assemblies 6 – 10 , respectively, in yields of 50–80 %. These derivatives have been characterized by multinuclear NMR spectroscopic analysis and X‐ray diffraction studies. Their solid‐state structures show the selective formation of U‐shaped supramolecular assemblies in which two monotopic π‐conjugated systems present large ( 6 , 7 , and 9 ) or medium ( 8 and 10 ) intramolecular π overlap, thus revealing π–π interactions. These assemblies self‐organize into head‐to‐tail π‐stacked dimers that in turn self‐assemble to afford infinite columnar π stacks. The nature, extent, and complexity of the intermolecular contacts within the head‐to‐tail π‐stacked dimer depend on the nature of the terminal polyaromatic fragment carried by the cyano‐capped monotopic ligand, but it does not alter the result of the self‐assembling process. These results demonstrate that the dinuclear molecular clip A that bears short metal–metal distances allows selective supramolecular assembly processes driven by the formation of intra‐ and intermolecular short π–π interactions in the resulting self‐assembled structures; thus, demonstrating that their shape is not only dictated by the symmetry of the building blocks. This approach opens perspectives toward the formation of extended π‐stacked columns based on dissymmetrical and functional π‐conjugated systems.     

Sensing of Double‐Stranded DNA/RNA Secondary Structures by Water Soluble Homochiral Perylene Bisimide Dyes

A broad series of homochiral perylene bisimide (PBI) dyes were synthesized that are appended with amino acids and cationic side chains at the imide positions. Self‐assembly behavior of these ionic PBIs has been studied in aqueous media by UV/Vis spectroscopy, revealing formation of excitonically coupled H‐type aggregates. The interactions of these ionic PBIs with different ds‐DNA and ds‐RNA have been explored by thermal denaturation, fluorimetric titration and circular dichroism (CD) experiments. These PBIs strongly stabilized ds‐DNA/RNA against thermal denaturation as revealed by high melting temperatures of the formed PBI/polynucleotide complexes. Fluorimetric titrations showed that these PBIs bind to ds‐DNA/RNA with high binding constants depending on the number of the positive charges in the side chains. Thus, spermine‐containing PBIs with six positive charges each showed higher binding constants (logK_s=9.2–9.8) than their dioxa analogues (logK_s=6.5–7.9) having two positive charges each. Induced circular dichroism (ICD) of PBI assemblies created within DNA/RNA grooves was observed. These ICD profiles are strongly dependent on the steric demand of the chiral substituents of the amino acid units and the secondary structure of the DNA or RNA. The observed ICD effects can be explained by non‐covalent binding of excitonically coupled PBI dimer aggregates into the minor groove of DNA and major groove of RNA which is further supported by molecular modeling studies.     

Chiral Perylene Diimides: Building Blocks for Ionic Self‐Assembly

A chiral perylene diimide building block has been prepared based on an amine derivative of the amino acid L ‐phenylalanine. Detailed studies were carried out into the self‐assembly behaviour of the material in solution and the solid state using UV/Vis, circular dichroism (CD) and fluorescence spectroscopy. For the charged building block BTPPP, the molecular chirality of the side chains is translated into the chiral supramolecular structure in the form of right‐handed helical aggregates in aqueous solution. Temperature‐dependent UV/Vis studies of BTPPP in aqueous solution showed that the self‐assembly behaviour of this dye can be well described by an isodesmic model in which aggregation occurs to generate short stacks in a reversible manner. Wide‐angle X‐ray diffraction studies (WXRD) revealed that this material self‐organises into aggregates with π–π stacking distances typical for π‐conjugated materials. TEM investigations revealed the formation of self‐assembled structures of low order and with no expression of chirality evident. Differential scanning calorimetry (DSC) and polarised optical microscopy (POM) were used to investigate the mesophase properties. Optical textures representative of columnar liquid–crystalline phases were observed for solvent‐annealed samples of BTPPP. The high solubility, tunable self‐assembly and chiral ordering of these materials demonstrate their potential as new molecular building blocks for use in the construction of chiro‐optical structures and devices.     

Backbone‐Directed Self‐Assembly of Interlocked Molecular Cyclic Metalla[3]Catenanes

The efficient backbone‐directed self‐assembly of cyclic metalla[3]catenanes by the combination of tetrachloroperylenediimide (TCPDI)‐based dinuclear rhodium(III) clips and 4,4′‐diazopyridine or 4,4′‐dipyridylethylene ligands is realized in a single‐step strategy. The topology and coordination geometry of the cyclic metalla[3]catenanes are characterized by NMR spectroscopy, ESI‐TOF‐MS spectrometry, UV/Vis‐NIR spectroscopy, and X‐ray diffraction studies. The most remarkable feature of the formed cyclic metalla[3]catenane is that it contains π‐aggregates (ca. 2.6 nm) incorporating six TCPDIs. Further studies revealed that cyclic metalla[3]catenanes can be converted reversibly to their corresponding sodium adducts and precursor building blocks, respectively. This strategy opens the possibility of generating unique supramolecular structures from discrete functional π‐aggregates with precise arrangements.     

Macrocyclic Donor–Acceptor Dyads Composed of a Perylene Bisimide Dye Surrounded by Oligothiophene Bridges

Two macrocyclic architectures comprising oligothiophene strands that connect the imide positions of a perylene bisimide (PBI) dye have been synthesized via a platinum-mediated cross-coupling strategy. The crystal structure of the double bridged PBI reveals all syn-arranged thiophene units that completely enclose the planar PBI chromophore via a 12-membered macrocycle. The target structures were characterized by steady-state UV/Vis absorption, fluorescence and transient absorption spectroscopy, as well as cyclic and differential pulse voltammetry. Both donor–acceptor dyads show ultrafast Förster Resonance Energy Transfer and photoinduced electron transfer, thereby leading to extremely low fluorescence quantum yields even in the lowest polarity cyclohexane solvent.     

Effect of Solvent and Protonation/Deprotonation on Electrochemistry,Spectroelectrochemistry and Electron‐Transfer Mechanisms of N‐Confused Tetraarylporphyrins in Nonaqueous Media

A series of N‐confused free‐base meso‐substituted tetraarylporphyrins was investigated by electrochemistry and spectroelectrochemistry in nonaqueous media containing 0.1 M tetra‐n‐butylammonium perchlorate (TBAP) and added acid or base. The investigated compounds are represented as (XPh)₄NcpH₂, in which “Ncp” is the N‐confused porphyrin macrocycle and X is a OCH₃, CH₃, H, or Cl substituent on the para position of each meso‐phenyl ring of the macrocycle. Two distinct types of UV/Vis spectra are initially observed depending upon solvent, one corresponding to an inner‐2H form and the other to an inner‐3H form of the porphyrin. Both forms have an inverted pyrrole with a carbon inside the cavity and a nitrogen on the periphery of the π‐system. Each porphyrin undergoes multiple irreversible reductions and oxidations. The first one‐electron addition and first one‐electron abstraction are located on the porphyrin π‐ring system to give π‐anion and π‐cation radicals with a potential separation of 1.52 to 1.65 V between the two processes, but both electrogenerated products are unstable and undergo a rapid chemical reaction to give new electroactive species, which were characterized in the present study. The effect of the solvent and protonation/deprotonation reactions on the UV/Vis spectra, redox potentials and reduction/oxidation mechanisms is discussed with comparisons made to data and mechanisms for the structurally related free‐base corroles and porphyrins.     

Synthesis,Crystal Structure,Spectral and Thermodynamic Properties of One Benzoindole Pentamethine Cyanine Dye

One benzoindole pentamethine cyanine dye was synthesized and characterized by ¹H NMR, IR, MS and UV‐Vis spectra. The UV‐Vis absorption and fluorescence spectra of the dye in chloroform, dimethyl sulfoxide, acetone, ethanol and methanol were investigated, and the λ_max of the dye was in the region 682.0–689.0 nm with large molar extinction coefficients (? > 10⁵ M^?1cm^?1) in different solvents. The structure of the dye was also characterized and analyzed by X‐ray diffraction. Crystallographic data revealed that the dye belonged to orthorhombic, with space group P2₁2₁2₁, a = 10.059(2) Å, b = 15.098(4) Å, c = 24.989(6) Å, V = 3794.8(15) ų, Z = 4. The C‐H···F intermolecular hydrogen bonds were displayed in the molecular system, which were effective in the molecular packing. The aggregation behavior and thermodynamic properties of the dye in aqueous methanol solution were also studied by means of UV‐Vis spectroscopy methods. The results indicated that the dye existed monomer‐dimer equilibrium in aqueous methanol solutions. The fundamental properties of the dye, such as the dimeric association constant K_D, the dimeric free energy ΔG_D, the dimeric entropy ΔS_D, and the dimeric enthalpy ΔH_D were determined. The ΔH_D of the dye was –46.0 kJ mol^?1.