Amide Synthesis from Alcohols and Amines Catalyzed by Ruthenium N‐Heterocyclic Carbene Complexes

The direct synthesis of amides from alcohols and amines is described with the simultaneous liberation of dihydrogen. The reaction does not require any stoichiometric additives or hydrogen acceptors and is catalyzed by ruthenium N‐heterocyclic carbene complexes. Three different catalyst systems are presented that all employ 1,3‐diisopropylimidazol‐2‐ylidene (IiPr) as the carbene ligand. In addition, potassium tert‐butoxide and a tricycloalkylphosphine are required for the amidation to proceed. In the first system, the active catalyst is generated in situ from [RuCl₂(cod)] (cod=1,5‐cyclooctadiene), 1,3‐diisopropylimidazolium chloride, tricyclopentylphosphonium tetrafluoroborate, and base. The second system uses the complex [RuCl₂(IiPr)(p‐cymene)] together with tricyclohexylphosphine and base, whereas the third system employs the Hoveyda–Grubbs 1st‐generation metathesis catalyst together with 1,3‐diisopropylimidazolium chloride and base. A range of different primary alcohols and amines have been coupled in the presence of the three catalyst systems to afford the corresponding amides in moderate to excellent yields. The best results are obtained with sterically unhindered alcohols and amines. The three catalyst systems do not show any significant differences in reactivity, which indicates that the same catalytically active species is operating. The reaction is believed to proceed by initial dehydrogenation of the primary alcohol to the aldehyde that stays coordinated to ruthenium and is not released into the reaction mixture. Addition of the amine forms the hemiaminal that undergoes dehydrogenation to the amide. A catalytic cycle is proposed with the {(IiPr)Ru^II} species as the catalytically active components.     

Oxidation and β‐Alkylation of Alcohols Catalysed by Iridium(I) Complexes with Functionalised N‐Heterocyclic Carbene Ligands

The borrowing hydrogen methodology allows for the use of alcohols as alkylating agents for C?C bond forming processes offering significant environmental benefits over traditional approaches. Iridium(I)‐cyclooctadiene complexes having a NHC ligand with a O‐ or N‐functionalised wingtip efficiently catalysed the oxidation and β‐alkylation of secondary alcohols with primary alcohols in the presence of a base. The cationic complex [Ir(NCCH₃)(cod)(MeIm(2‐ methoxybenzyl))][BF₄] (cod=1,5‐cyclooctadiene, MeIm=1‐methylimidazolyl) having a rigid O‐functionalised wingtip, shows the best catalyst performance in the dehydrogenation of benzyl alcohol in acetone, with an initial turnover frequency (TOF₀) of 1283 h^?1, and also in the β‐alkylation of 2‐propanol with butan‐1‐ol, which gives a conversion of 94 % in 10 h with a selectivity of 99 % for heptan‐2‐ol. We have investigated the full reaction mechanism including the dehydrogenation, the cross‐aldol condensation and the hydrogenation step by DFT calculations. Interestingly, these studies revealed the participation of the iridium catalyst in the key step leading to the formation of the new C?C bond that involves the reaction of an O‐bound enolate generated in the basic medium with the electrophilic aldehyde.     

A Cooperative N‐Heterocyclic Carbene/Chiral Phosphate Catalysis System for Allenolate Annulations

The highly enantioselective NHC‐catalyzed [3+2] annulation reaction with α,β‐alkynals and α‐ketoesters has been developed. A new mode of cooperative catalysis involving the combination of a chiral Brønsted acid and a C₁‐symmetric biaryl saturated‐imidazolium precatalyst was required to generate the desired γ‐crotonolactones in high yields and levels of enantioselectivity.     

Selective Iridium‐Catalyzed Alkylation of (Hetero)Aromatic Amines and Diamines with Alcohols under Mild Reaction Conditions

Selective amine alkylation : A P,N‐ligand‐stabilized iridium complex has been used as an efficient catalyst for the alkylation of (hetero)aromatic amines with alcohols at mild reaction temperatures and catalyst loadings as low as 0.1 mol % Ir (see scheme). The excellent selectivity of the catalyst for monoalkylation of the amine function has also been exploited for the N,N′‐dialkylation of diamines in both symmetric and nonsymmetric fashions.

     

Boron‐Catalyzed N‐Alkylation of Amines using Carboxylic Acids

A boron‐based catalyst was found to catalyze the straightforward alkylation of amines with readily available carboxylic acids in the presence of silane as the reducing agent. Various types of primary and secondary amines can be smoothly alkylated with good selectivity and good functional‐group compatibility. This metal‐free amine alkylation was successfully applied to the synthesis of three commercial medicinal compounds, Butenafine, Cinacalcet. and Piribedil, in a one‐pot manner without using any metal catalysts.     

Dicationic Tellurium Analogues of the Classic N‐Heterocyclic Carbene

The synthesis and comprehensive characterization of the first dicationic tellurium analogues of N‐heterocyclic carbenes (NHCs) has been reported, in both the +2 and +4 oxidation states. For the +2 oxidation state, a base‐stabilized form of TeCl₂ is used as the starting material. The dications are isolated by means of halide metathesis and the solid‐state structures confirm the previously calculated diimine bonding arrangement. For Te^IV, a diamine is used in a high‐yielding dehydrohalogen coupling reaction from TeCl₄. The dicationic NHC analogue is isolated in a base‐stabilized form through halide abstraction and subsequent coordination by pyridine.     

Catalytic Nucleophilic Fluorination of Secondary and Tertiary Propargylic Electrophiles with a Copper–N‐Heterocyclic Carbene Complex

A catalytic method for the nucleophilic fluorination of propargylic electrophiles is described. Our protocol involves the use of a Cu(NHC) complex as the catalyst and is suitable for the preparation of secondary and tertiary propargylic fluorides without the formation of isomeric fluoroallenes. Preliminary mechanistic investigations suggest that fluorination proceeds via copper acetylides and that cationic species are involved.     

An Iridium(I) N‐Heterocyclic Carbene Complex Catalyzes Asymmetric Intramolecular Allylic Amination Reactions

A chiral iridium(I) N‐heterocyclic carbene complex was reported for the first time as the catalyst in the highly enantioselective intramolecular allylic amination reaction. The current method provides facile access to biologically important enantioenriched indolopiperazinones and piperazinones in good yields (74–91 %) and excellent enantioselectivities (92–99 % ee). Preliminary mechanistic investigations reveal that the C?H activation occurs at the position ortho to the N‐aryl group of the ligand.     

Highly Efficient Ruthenium‐Catalyzed N‐Formylation of Amines with H2 and CO2

A highly efficient catalyst system based on ruthenium‐pincer‐type complexes has been discovered for N‐formylation of various amines with CO₂ and H₂, thus affording the corresponding formamides with excellent productivity (turnover numbers of up to 1 940 000 in a single batch) and selectivity. Using a simple catalyst recycling protocol, the catalyst was reused for 12 runs in N,N‐dimethylformamide production without significant loss of activity, thus demonstrating the potential for practical utilization of this cost‐effective process. A one‐pot two‐step procedure for hydrogenation of CO₂ to methanol via the intermediacy of formamide formation has also been developed.     

A Facile Route to Backbone‐Tethered N‐Heterocyclic Carbene (NHC) Ligands via NHC to aNHC Rearrangement in NHC Silicon Halide Adducts

The reaction of 1,3‐diisopropylimidazolin‐2‐ylidene (iPr₂Im) with diphenyldichlorosilane (Ph₂SiCl₂) leads to the adduct (iPr₂Im)SiCl₂Ph₂ 1 . Prolonged heating of isolated 1 at 66 °C in THF affords the backbone‐tethered bis(imidazolium) salt [(^aHiPr₂Im)₂SiPh₂]²⁺ 2 Cl^? 2 (“^a” denotes “abnormal” coordination of the NHC), which can be synthesized in high yields in one step starting from two equivalents of iPr₂Im and Ph₂SiCl₂. Imidazolium salt 2 can be deprotonated in THF at room temperature using sodium hydride as a base and catalytic amounts of sodium tert‐butoxide to give the stable N‐heterocyclic dicarbene (^aiPr₂Im)₂SiPh₂ 3 , in which two NHCs are backbone‐tethered with a SiPh₂ group. This easy‐to‐synthesize dicarbene 3 can be used as a novel ligand type in transition metal chemistry for the preparation of dinuclear NHC complexes, as exemplified by the synthesis of the homodinuclear copper(I) complex [{^a(ClCu?iPr₂Im)}₂SiPh₂] 4 .     

Radical trans‐Hydroboration of Alkynes with N‐Heterocyclic Carbene Boranes

Hydroboration of internal alkynes with N‐heterocyclic carbene boranes (NHC‐boranes) occurs to provide stable NHC (E)‐alkenylboranes upon thermolysis in the presence of di‐tert‐butyl peroxide. The E isomer results from an unusual trans‐hydroboration, and the E/Z selectivity is typically high (90:10 or greater). Evidence suggests that this hydroboration occurs by a radical‐chain reaction involving addition of an NHC‐boryl radical to an alkyne to give a β‐NHC‐borylalkenyl radical. Ensuing hydrogen abstraction from the starting NHC‐borane provides the product and returns the starting NHC‐boryl radical. Experiments suggest that the observed trans‐selectivity results from kinetic control in the hydrogen‐transfer reaction.     

Stable N‐Heterocyclic Carbene Adducts of Arylchlorosilylenes and Their Germanium Homologues

The first N‐heterocyclic carbene adducts of arylchlorosilylenes are reported and compared with the homologous germanium compounds. The arylsilicon(II) chlorides SiArCl(Im‐Me₄) [Ar=C₆H₃‐2,6‐Mes₂ (Mes=C₆H₂‐2,4,6‐Me₃), C₆H₃‐2,6‐Trip₂ (Trip=C₆H₂‐2,4,6‐iPr₃)] were obtained selectively on dehydrochlorination of the arylchlorosilanes SiArHCl₂ with 1,3,4,5‐tetramethylimidazol‐2‐ylidene (Im‐Me₄). The analogous arylgermanium(II) chlorides GeArCl(Im‐Me₄) were prepared by metathetical exchange of GeCl₂(Im‐Me₄) with LiC₆H₃‐2,6‐Mes₂ or addition of Im‐Me₄ to GeCl(C₆H₃‐2,6‐Trip₂). All compounds were fully characterized. Density functional calculations on ECl(C₆H₃‐2,6‐Trip₂)(Im‐Me₄), where E=Si, Ge, at different levels of theory show very good agreement between calculated and experimental bonding parameters, and NBO analyses reveal similar electronic structures of the two aryltetrel(II) chlorides. The low gas‐phase Gibbs free energy of bond dissociation of SiCl(C₆H₃‐2,6‐Trip₂)(Im‐Me₄) (Δ${G{{{\circ}\hfill \atop {\rm calcd}\hfill}}}$ =28.1 kJ mol^?1) suggests that the carbene adducts SiArCl(Im‐Me₄) may be valuable transfer reagents of the arylsilicon(II) chlorides SiArCl.     

Protic N‐Heterocyclic Carbene Versus Pyrazole: Rigorous Comparison of Proton‐ and Electron‐Donating Abilities in a Pincer‐Type Framework

Evaluation of the acidity of proton‐responsive ligands such as protic N‐heterocyclic carbenes (NHCs) bearing an NH‐wingtip provides a key to understanding the metal–ligand cooperation in enzymatic and artificial catalysis. Here, we design a CNN pincer‐type ruthenium complex 2 bearing protic NHC and isoelectronic pyrazole units in a symmetrical skeleton, to compare their acidities and electron‐donating abilities. The synthesis is achieved by direct C?H metalation of 2‐(imidazol‐1‐yl)‐6‐(pyrazol‐3‐yl)pyridine with [RuCl₂(PPh₃)₃]. ¹⁵N‐Labeling experiments confirm that deprotonation of 2 occurs first at the pyrazole side, indicating clearly that the protic pyrazole is more acidic than the NHC group. The electrochemical measurements as well as derivatization to carbonyl complexes demonstrate that the protic NHC is more electron‐donating than pyrazole in both protonated and deprotonated forms.     

New Iridium Catalysts for the Selective Alkylation of Amines by Alcohols under Mild Conditions and for the Synthesis of Quinolines by Acceptor‐less Dehydrogenative Condensation

A novel family of iridium catalysts stabilised by P,N‐ligands have been introduced. The ligands are based on imidazo[1,5‐b]pyridazin‐7‐amines and can be synthesised with a broad variety of substitution patterns. The catalysts were synthesised quantitatively from the protonated ligands and a commercially available iridium precursor. The catalysts mediate the alkylation of amines by alcohols under mild conditions (70 °C). In addition, the synthesis of quinolines from secondary or primary alcohols and amino alcohols is reported. This sustainable synthesis proceeds through the liberation of two equivalents of water and two equivalents of dihydrogen. The investigations indicate that catalysts suitable for hydrogen autotransfer or borrowing hydrogen chemistry might also be suitable for acceptor‐less dehydrogenative condensation reactions.     

Color‐Tunable Electrogenerated Chemiluminescence of Ruthenium N‐Heterocyclic Carbene Complexes

Ru(II) complexes 1 – 3 bearing various N‐heterocyclic carbene (NHC) ligands were synthesized, and their photophysical, electrochemical, and electrogenerated chemiluminescence (ECL) properties were discussed to evaluate a potential of their use as multicolor ECL labels. Interestingly, they exhibited ECL emission ranging from greenish‐yellow to red both in nonaqueous and mixed aqueous solutions, which might show the potential of the Ru(II) complexes as multicolor ECL labels.