Reversible Photomodulation of Electronic Communication in a π‐Conjugated Photoswitch‐Fluorophore Molecular Dyad

The extent of electronic coupling between a boron dipyrromethene (BODIPY) fluorophore and a diarylethene (DAE) photoswitch has been modulated in a covalently linked molecular dyad by irradiation with either UV or visible light. In the open isomer, both moieties can be regarded as individual chromophores, while in the closed form the lowest electronic (S₀→S₁) transition of the dyad is slightly shifted, enabling photomodulation of its fluorescence. Transient spectroscopy confirms that the dyad behaves dramatically different in the two switching states: while in the open isomer it resembles an undisturbed BODIPY fluorophore, in the closed isomer no fluorescence occurs and instead a red‐shifted DAE behavior prevails.     

Photoswitched singlet energy transfer in a porphyrin-spiropyran dyad.

A photochromic nitrospiropyran moiety (Sp) has been covalently linked to a zinc (PZn) and to a free-base (P(H2)) porphyrin. In the resulting dyads (P(Zn)-Sp(c) and P(H2)-Sp(c)), the porphyrin first excited singlet states are unperturbed by the closed form of the attached spiropyran. Excitation of the spiropyran moiety of either dyad in the near-UV region results in ring opening to a merocyanine form (P-Sp(o)) that absorbs at 600 nm. The open form re-closes thermally in 2-methyltetrahydrofuran with a time constant of 20 s, or following irradiation into the 600 nm band. Excitation of the zinc porphyrin moiety in the merocyanine form of the dyad yields 1PZn-Sp(o). The lifetime of the zinc porphyrin excited state is reduced from its usual value of 1.8 ns to 130 ps by singlet-singlet energy transfer to the merocyanine moiety to give PZn-1Sp(o). The quantum yield of energy transfer is 0.93. Quenching is also observed in the free base dyad, where 1P(H2)-Sp(o) and P(H2)-1Sp(o) exchange singlet excitation energy. This photoswitchable quenching phenomenon provides light-activated control of the porphyrin excited states, and consequently control of any subsequent energy or electron-transfer processes that might be initiated by these excited states in more complex molecular photonic or optoelectronic devices.     

Aromaticity‐Controlled Thermal Stability of Photochromic Systems Based on a Six‐Membered Ring as Ethene Bridges: Photochemical and Kinetic Studies

Three photochromic compounds—2‐butyl‐5,6‐bis[5‐(4‐methoxyphenyl)‐2‐methylthiophen‐3‐yl]‐1 H‐benzo[de]isoquinoline‐1,3(2 H)‐dione (BTE‐NA), 4,5‐bis[5‐(4‐methoxyphenyl)‐2‐methylthiophen‐3‐yl]benzo[c][1,2,5]thiadiazole (BTA), and BTTA, which contain naphthalimide, benzothiadiazole, and benzobisthiadiazole as six‐membered ethene bridges with different aromaticities—were systematically studied in solution, sol–gel, and single‐crystal states. They exhibit typical photochromic performance with considerably high cyclization quantum yields. BTE‐NA, BTA, and BTTA form a typical donor–π–acceptor (D –π–A) system with significant intramolecular charge transfer (ICT) between HOMO and LUMO upon excitation, thus realizing the fluorescence modulation by both photochromism and solvatochromism. The three ethene bridges with different degrees of aromaticity can provide a systematic comparison of the thermal stability evolution for their corresponding closed forms (c‐BTE‐NA, c‐BTA, and c‐BTTA). c‐BTE‐NA shows first‐order decay in various solvents from cyclohexane to acetonitrile. c‐BTA only shows first‐order decay in polar solvents such as chloroform, whereas it is stable in nonpolar solvents like toluene. In contrast, the less aromatic property of BTTA gives rise to its unprecedented thermal stability in various solvents even at elevated temperatures in toluene (328 K). Moreover, the small energy barrier between the parallel and antiparallel conformers allows the full conversion from BTTA to c‐BTTA. In well‐ordered crystal states, all three compounds adopt a parallel conformation. Interestingly, BTTA forms a twin crystal of asymmetric nature with interactions between the electron‐rich oxygen atom of the methoxy group and the carbon atom of the electron‐deficient benzobisthiadiazole moiety. This work contributes to the understanding of aromaticity‐controlled thermal stability of photochromic systems based on a six‐membered ring as an ethene bridge, and a broadening of the novel building blocks for photochromic bisthienylethene systems.     

Efficient One‐step Synthesis and Properties of Photochromic Diarylethenes Having an Indene Bridging Unit

Two novel isomeric photochromic diarylethenes with an indene bridging unit have been prepared by a simple and efficient one‐step synthesis method. Their properties, including photochromic behavior, fluorescent properties and fatigue resistance, have been investigated. These two isomeric compounds showed photochromic back‐and‐forth reactions with ultraviolet and visible light both in solution and in PMMA film. Their ring‐open forms exhibited appreciable fluorescence, which was quenched by the ring‐closed forms. All results indicated that diarylethenes derivatives with indene‐aryl bridges exhibited rather high fatigue resistance and good thermally irreversible photochromic properties.     

Photochromic fulgides: Transformation of the non‐photochromic (Z)‐isomer of a fulgide into a highly photochromic (E)‐isomer via structural modification involving enhanced conjugation

The non‐photochromic fulgide (1‐Z) has been successfully converted into the highly photochromic ( 3‐Z ) analogue. A dicyanomethylene group was introduced at the 5‐position of 1‐Z in order to enhance the latter's conjugation properties that would facilitate the photochemical Z→E isomerization process. The irradiation of the product 3‐Z with a UV light at λ_max 350 nm formed a bluish green solution which absorbed at λ_max 620 nm, corresponding to the ring‐closed product 4. The latter was also formed from the reference dicyanomethylene product 3‐E synthesized from 1‐E. The irradiation of 4 at λ_max 532 nm produced the reversion to the original pale yellow color of 3‐E.     

“Click-switch” – one-step conversion of organic azides into photochromic diarylethenes for the generation of light-controlled systems

Diarylethenes (DAEs) are an established class of photochromic molecules, but their effective incorporation into pre-existing targets is synthetically difficult. Here we describe a new class of DAEs in which one of the aryl rings is a 1,2,3-triazole that is formed by “click” chemistry between an azide on the target and a matching alkyne–cyclopentene–thiophene component. This late-stage zero-length linking allows for tight integration of the DAE with the target, thereby increasing the chances for photomodulation of target functions. Nineteen different DAEs were synthesized and their properties investigated. All showed photochromism. Electron-withdrawing groups, and in particular −M-substituents at the triazole and/or thiophene moiety resulted in DAEs with high photo- and thermostability. Further, the chemical nature of the cyclopentene bridge had a strong influence on the behaviour upon UV light irradiation. Incorporation of perfluorinated cyclopentene led to compounds with high photo- and thermostability, but the reversible photochromic reaction was restricted to halogenated solvents. Compounds containing the perhydrogenated cyclopentene bridge, on the other hand, allowed the reversible photochromic reaction in a wide range of solvents, but had on average lower photo- and thermostabilities. The combination of the perhydrocyclopentene bridge and electron-withdrawing groups resulted in a DAE with improved photostability and no solvent restriction. Quantum chemical calculations helped to identify the photoproducts formed in halogenated as well as non-halogenated solvents. For two optimized DAE photoswitches, photostationary state composition and reaction quantum yields were determined. These data revealed efficient photochemical ring closure and opening. We envision applications of these new photochromic diarylethenes in photonics, nanotechnology, photobiology, photopharmacology and materials science.

New photochromic diarylethenes are reported in which one aryl ring is a 1,2,3-triazole that is formed by “click” chemistry between an azide on the target and a matching alkyne–cyclopentene–thiophene component.     

N−H‐Type Excited‐State Proton Transfer in Compounds Possessing a Seven‐Membered‐Ring Intramolecular Hydrogen Bond

A series of compounds containing 5‐(2‐aminobenzylidene)‐2,3‐dimethyl‐3,5‐dihydro‐4H‐imidazol‐4‐one ( o ‐ABDI ) as the core chromophore with a seven‐membered‐ring N?H‐type intramolecular hydrogen bond have been synthesized and characterized. The acidity of the N?H proton and thus the hydrogen‐bond strength can be fine‐tuned by replacing one of the amino hydrogen atoms by a substituent R, the acidity increasing with increasing electron‐withdrawing strength of R, that is, in the order H<COCH₃<COPh<Tosyl<COCF₃. The tosyl and trifluoroacetyl derivatives undergo ultrafast, irreversible excited‐state intramolecular proton transfer (ESIPT) that results in proton‐transfer emission solely in the red region. Reversible ESIPT, and hence dual emission, involving the normal and proton‐transfer tautomers was resolved for the acetyl‐ and benzyl‐substituted counterparts. For o ‐ABDI , which has the weakest acidity, ESIPT is prohibited due to its highly endergonic reaction. The results clearly demonstrate the harnessing of ESIPT by modifying the proton acidity and hydrogen‐bonding strength in a seven‐membered‐ring intramolecular hydrogen‐bonding system. For all the compounds studied, the emission quantum yields are weak (ca. 10^?3) in dichloromethane, but strong in the solid form, ranging from 3.2 to 47.4 %.     

Photocontrolled Intramolecular Charge/Energy Transfer and Fluorescence Switching of Tetraphenylethene‐Dithienylethene‐Perylenemonoimide Triad with Donor–Bridge–Acceptor Structure

Photochromic 1,2‐dithienylethene (DTE) derivatives with a high thermal stability and fatigue resistance are appealing for optical switching of fluorescence. Here, we introduce a donor–photochromic bridge–acceptor tetraphenylethene‐dithienylethene‐perylenemonoimide (TPE‐DTE‐PMI) triad, in which TPE acts as the electron donor, PMI as the electron acceptor, and DTE as the photochromic bridge. In this system, the localized and intramolecular charge transfer emission of TPE‐DTE‐PMI with various Stokes shifts have been observed due to the photoinduced intramolecular charge transfer in different solvents. Upon UV irradiation, the fluorescence quenching resulting from photochromic fluorescence resonance energy transfer in TPE‐DTE‐PMI has been demonstrated in solution and in solid films. The fluorescence on/off switching ratio in polymethylacrylate film exceeds 100, a value much higher than in polymethylmethacrylate film, thus indicating that the fluorescence switching is dependent on matrices.     

Photoinduced energy and electron-transfer processes in porphyrin-perylene bisimide symmetric triads

The photophysics of two symmetric triads, (ZnP)2PBI and (H2P)2PBI, made of two zinc or free-base porphyrins covalently attached to a central perylene bisimide unit has been investigated in dichloromethane and in toluene. The solvent has been shown to affect not only quantitatively but also qualitatively the photophysical behavior. A variety of intercomponent processes (singlet energy transfer, triplet energy transfer, photoinduced charge separation, and recombination) have been time-resolved using a combination of emission spectroscopy and femtosecond and nanosecond time-resolved absorption techniques yielding a very detailed picture of the photophysics of these systems. The singlet excited state of the lowest energy chromophore (perylene bisimide in the case of (ZnP)2PBI, porphyrin in the case of (H2P)2PBI) is always quantitatively populated, besides by direct light absorption, by ultrafast singlet energy transfer (few picosecond time constant) from the higher energy chromophore. In dichloromethane, the lowest excited singlet state is efficiently quenched by electron transfer leading to a charge-separated state where the porphyrin is oxidized and the perylene bisimide is reduced. The systems then go back to the ground state by charge recombination. The four charge separation and recombination processes observed for (ZnP)2PBI and (H2P)2PBI in dichloromethane take place in the sub-nanosecond time scale. They obey standard free-energy correlations with charge separation lying in the normal regime and charge recombination in the Marcus inverted region. In less polar solvents, such as toluene, the energy of the charge-separated states is substantially lifted leading to sharp changes in photophysical mechanism. With (ZnP)2PBI, the electron-transfer quenching is still fast, but charge recombination takes place now in the nanosecond time scale and to triplet state products rather than to the ground state. Triplet-triplet energy transfer from the porphyrin to the perylene bisimide is also involved in the subsequent deactivation of the triplet manifold to the ground state. With (H2P)2PBI, on the other hand, the driving force for charge separation is too small for electron-transfer quenching, and the deactivation of the porphyrin excited singlet takes place via intersystem crossing to the triplet followed by triplet energy transfer to the perylene bisimide and final decay to the ground state.     

P‐Type Photochromism of New Helical Naphthopyrans: Synthesis and Photochemical,Photophysical and Theoretical Study

Two novel helical naphthopyrans have been synthesised. The helical scaffold has the interesting effect of increasing the thermal stability of the transoid‐trans (TT) open isomer formed upon UV irradiation of the closed form (CF), which transforms these naphthopyrans from thermal to photochemical photochromes. The photochromic performance is excellent in both polar and apolar solvents and the conversion percentage from the CF to the TT form can be as high as 92.8 %. We propose a new method to determine the quantum yields of the photochemical processes that lead to transoid‐cis (TC) and TT isomers, and their molar absorption coefficients. The thermal stability of the TT and TC isomers has been studied in different solvents. The quantum yields of fluorescence before and after irradiation, along with the decay lifetimes, have also been measured. TD‐DFT calculations have been performed to determine the relative thermodynamic stability of the species involved in the photochromic mechanism and to rationalise their spectral properties.     

Time‐Dependent Emission Enhancement of the Ethynylpyrene‐o‐Carborane Dyad and Its Application as a Luminescent Color Sensor for Evaluating Water Contents in Organic Solvents

The time‐dependent emission enhancement (TDEE) phenomena of the 1‐(o‐carboran‐1‐yl)ethynylpyrene dyad were reported. It was found that the emission intensity from the dyad increased in tetrahydrofuran (THF), acetone and dichloromethane with increasing incubation time. From the mechanistic studies, it was suggested that agglomeration of the dyad gradually proceeded in these media, followed by expression of excimer luminescence. Additionally, it was shown that the rates of TDEE of the dyad were sensitively accelerated in the presence of a trace amount of water. Based on this fact, a detection system for water contents in acetone was constructed. Before and after incubation for 96 h at room temperature, time courses of changes in optical properties were monitored. Finally, water contents in acetone can be estimated by the degrees of TDEE and emission color changes in the range from 0.1 wt % to 2.0 wt % and from 2.0 wt % to 20 wt %, respectively.     

Photocontrol Over Self‐Assembled Nanostructures of π–π Stacked Dyes Supported by the Parallel Conformer of Diarylethene

Diarylethenes (DAEs) have rarely been used in the design of photoresponsive supramolecular assemblies with a well‐defined morphology transition owing to rather small structural changes upon photoisomerization. A supramolecular design based on the parallel conformation of DAEs enables the construction of photoresponsive dye assemblies that undergo remarkable nanomorphology transitions. The cooperative stacking of perylene bisimide (PBI) dyes was used to stabilize the parallel conformer of DAE through complementary hydrogen bonds. Atomic force microscopy, UV/Vis spectroscopy, and molecular modeling revealed that our DAE and PBI building blocks coassembled in nonpolar solvent to form well‐defined helical nanofibers featuring J‐type dimers of PBI dyes. Upon irradiating the coassembly solution with UV and visible light in turn, a reversible morphology change between nanofibers and nanoparticles was observed. This system involves the generation of a new self‐assembly pathway by means of photocontrol.     

Creating Coordination‐Based Cavities in a Multiresponsive Supramolecular Gel

Creating cavities in varying levels, from molecular containers to macroscopic materials of porosity, have long been motivated for biomimetic or practical applications. Herein, we report an assembly approach to multiresponsive supramolecular gels by integrating photochromic metal–organic cages as predefined building units into the supramolecular gel skeleton, providing a new approach to create cavities in gels. Formation of discrete O‐Pd₂L₄ cages is driven by coordination between Pd²⁺ and a photochromic dithienylethene bispyridine ligand (O‐PyFDTE). In the presence of suitable solvents (DMSO or MeCN/DMSO), the O‐Pd₂L₄ cage molecules aggregate to form nanoparticles, which are further interconnected through supramolecular interactions to form a three‐dimensional (3D) gel matrix to trap a large amount of solvent molecules. Light‐induced phase and structural transformations readily occur owing to the reversible photochromic open‐ring/closed‐ring isomeric conversion of the cage units upon UV/visible light radiation. Furthermore, such Pd₂L₄ cage‐based gels show multiple reversible gel–solution transitions when thermal‐, photo‐, or mechanical stimuli are applied. Such supramolecular gels consisting of porous molecules may be developed as a new type of porous materials with different features from porous solids.     

Synthesis,Photochromism, and Thermal Stability of Two New Diarylethenes Based On Spirobifluorene

Two novel spirobifluorene‐diarylethenes compounds with furan ( 9a ) and thiophen ( 8a ) as heterocyclic aryl groups were successfully synthesized, and their structures were fully characterized with FTIR, NMR, mass spectra (MS), and elemental analysis. Their photochromic properties were examined. The results indicated that they showed good photochromic behaviors in hexane and acetonitrile. The fluorescence emission was quenched along with the photochromism from open ring to closed ring. Large fluorescence emission blue‐shift was clearly observed in polar solvents. Furthermore, the thermal stability of 8a and 9a was greatly improved by introducing spirobifluorene group into the molecules. The 5% loss weight temperature of 9a was 59°C higher than that of 10a without spirobifluorene.     

Photoswitchable and Water‐Soluble Fluorescent Nano‐Aggregates Based on a Diarylethene–Dansyl Dyad and Liposome

In this work, a unique approach is developed to generate photoswitchable and water‐soluble fluorescent nano‐aggregates. Initially, a new light‐controlled diarylethene–dansyl dyad DAE 1 is formed by linking two dansyl fluorophores covalently to a symmetrical dithienylethene backbone, whose photophysical properties can be reversibly switched by optical stimuli. Subsequently, the water insolubility of the molecular switch 1 is overcome by incorporating it into the bilayer of liposome DPPC (1,2‐dihexadecanoyl‐sn ‐glycero‐3‐phosphocholine) in water. This strategy creates stable fluorescent nano‐aggregates OF‐1@DPPC (≈25 nm diameter) that are soluble in an aqueous medium. The nano‐aggregates OF‐1@DPPC retain and even improve the photoswitchable fluorescence properties of DAE 1 . More importantly, OF‐1@DPPC exhibits a remarkable photostability and fatigue resistance after 5 cycles of irradiation with UV and visible light, which is crucial for its practical application.     

Photomobile Polymer Materials: Photoresponsive Behavior of Cross‐Linked Liquid‐Crystalline Polymers with Mesomorphic Diarylethenes

Cross‐linked liquid‐crystalline (LC) polymers with a mesomorphic diarylethene were prepared to demonstrate a versatile strategy for cross‐linked photochromic LC polymers as photomobile materials. Upon exposure to UV light to cause photocyclization of the diarylethene chromophore, the cross‐linked polymer films bend toward an actinic light source. By irradiation with visible light to cause a closed‐ring to open‐ring isomerization, the bent films revert to the initial flat state. Without visible‐light irradiation, the bent films remain bent even at 120 °C, indicating high thermal stability of the cross‐linked diarylethene LC polymers.     

Ring transformations of heterocyclic compounds. XXIII. The UV irradiation product of photochromic 2,4,6‐triaryl‐1‐(spiro[2H‐l‐benzopyran‐2,2′‐indoline]‐6‐yl)pyridinium salts ‐ A phenolate betaine or a pyridinium substituted merocyanine dye?

The synthesis of the novel 2,4,6‐triaryl‐1‐(spiro[2H‐1‐benzopyran‐2,2′‐indoline]‐6‐yl)pyridiniumper‐chlorates 4 by reaction of 5 ‐nitrosalicylaldehydes 6 with 1,3,3‐trimethyl‐2‐methyleneindoline ( 7 ) to 6‐nitro‐spiro[2H‐1‐benzopyran‐2,2′‐indolines] 1 , their stannous chloride reduction to the 6‐amino derivatives 8 , followed by a 2,6‐[C₅+N] ring transformation with 2,4,6‐triarylpyrylium perchlorates 9 , is reported. UV irradiation experiments in twenty solvents of different polarity prove their photochromic properties and show that the photochemically generated negative solvatochromic dyes 5 , formed by ring opening of the benzopyran moiety of 4 , are rather merocyanine than pyridinium phenolate betaine dyes.     

Enhancement of the Curie temperature by isomerization of diarylethene (DAE) for an organic-inorganic hybrid system: Co4(OH)7(DAE)0.5.3H2O

Intercalation of an organic photochromic molecule into layered magnetic systems may provide multifunctional properties such as photomagnetism. To build up a photosensitive multifunctional magnet, an organic-inorganic hybrid system coupled with a photochromic diarylethene anion, 2,2'-dimethyl-3,3'-(perfluorocyclopentene-1,2-diyl)bis(benzo[b]thiophene-6-sulfonate) (DAE), and cobalt LDHs (layered double hydroxides), Co4(OH)7(DAE)0.5.3H2O, was synthesized by the anion exchange reaction between Co2(OH)3(CH3COO).H2O and DAE. In the dark and under UV-irradiated (313 nm) conditions, Co4(OH)7(DAE)0.5.3H2O with open and closed forms of DAE were obtained, respectively. The magnetic susceptibility measurements elucidated ferromagnetic intra- and interlayer interactions and Curie temperatures of TC = 9 and 20 K for cobalt LDHs with the open and closed forms of DAE, respectively. The enhancement of the Curie temperature from 9 to 20 K by substitution of the open form of DAE with the closed form of DAE as an intercalated molecule is attributed to the delocalization of the pi-electrons in the closed form of DAE, which enhances the interlayer magnetic interaction. The enhancement of the interlayer magnetic interaction induced by the delocalization of pi-electrons in intercalated molecules is strongly supported by the fact that the Curie temperature (26.0 K) of cobalt LDHs with (E,E)-2,4-hexadienedioate having a conjugated pi-electron system is enormously higher than that (7.0 K) of the cobalt LDHs with hexanedioate. By UV irradiation at 313 nm, Co4(OH)7(DAE)0.5.3H2O shows the photoisomerization of DAE from the open form to the closed one in the solid state, which leads to the enhancement of Curie temperature.     

Optical switching,photophysical, and electrochemical behaviors of pendant triazole‐linked indolylfulgimide polymer

Triazole‐linked 2‐indolylfulgimide polymer has been synthesized and its photochromic switching behavior has been characterized by NMR, IR, GPC, TGA, DSC, and UV–Vis spectroscopy. The synthesized photochromic polymer showed absorption peak maxima at 386 and 510 nm wherein the absorption at 510 nm was attributed to charge transfer from triazole ring nitrogen to carbonyl carbon of fulgimide unit. Fluorescence lifetime studies on exciting at 550 nm reveals triexponential behavior with fluorescence decay around 0.1, 1 and 4.2 ns, which correspond to open (E), closed (C) form of fulgimide and triazole ring, respectively. Whereas exciting at 470 nm evidences biexponential fit with fluorescence decay around 0.1 and 2.2 ns, which corresponds to the closed (C) form and triazole ring, respectively. Fluorescence decay of triazole ring was found to be influenced by the excitation wavelength. The cyclic voltammogram of open form of polymer depicts irreversible reductive wave at ?1.4 V. On illumination with 360‐nm light, the reduction wave of polymer was shifted toward less cathodic wave at ?0.9 V; this leads to formation of the closed form of fulgimide unit. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Two‐Photon Excitation of a Plasmonic Nanoswitch Monitored by Single‐Molecule Fluorescence Microscopy

Visible‐light excitation of the surface plasmon band of silver nanoplates can effectively localize and concentrate the incident electromagnetic field enhancing the photochemical performance of organic molecules. Herein, the first single‐molecule study of the plasmon‐assisted isomerization of a photochrome‐fluorophore dyad, designed to switch between a nonfluorescent and a fluorescent state in response to the photochromic transformation, is reported. The photochemistry of the switchable assembly, consisting of a photochromic benzooxazine chemically conjugated to a coumarin moiety, is examined in real time with total internal reflection fluorescence microscopy in the presence of silver nanoplates excited with a 633 nm laser. The metallic nanostructures significantly enhance the visible light‐induced performance of the photoconversion, which normally requires ultraviolet excitation. The resulting ring‐open isomer is strongly fluorescent and can also be excited at 633 nm. These stochastic emission events are used to monitor photochromic activation and show quadratic dependence on incident power. The utilization of a single laser wavelength for both photochromic activation and excitation effectively mimics a pseudo two‐colours system.