1,2‐Bis(trifluoromethyl)ethene‐1,2‐dicarbonitrile: Enol Ethers and Ketene Acetals as Cycloaddition Partners

(E)‐ and (Z)‐1,2‐bis(trifluoromethyl)ethene‐1,2‐dicarbonitrile ((E)‐ and (Z)‐BTE, resp., =(E)‐ and (Z)‐2,3‐bis(trifluoromethyl)but‐2‐enedinitrile) were used as a stereochemical probe in studying (2+2) cycloadditions of acceptor with donor alkenes. The additions to methyl (E)‐ and (Z)‐propenyl ether gave rise to the eight conceivable cyclobutanes 8 , although in different ratios in reactions of (E)‐ and (Z)‐BTE. The ¹⁹F‐NMR data served the structural assignment and the quantitative analysis. The mechanistic discussion is based on rotations and ring closures of the assumed 1,4‐zwitterionic intermediates. Dimethylketene dimethyl acetal, methylketene dimethyl acetal, and ketene diethyl acetal show an increasing rate in their reactions with BTE as well as in the equilibration of the cycloadducts.     

1,2‐Bis(trifluoromethyl)ethene‐1,2‐dicarbonitrile: (2+2) Cycloadditions with Vinyl Ethers

The title compound (short version: BTE) occurs in (E)‐ and (Z)‐isomers (both with b.p. of ca. 100°) which equilibrate with nucleophilic catalysts. Both undergo (2+2) cycloadditions with methyl vinyl ether at 25°. Three stereogenic centers in the cyclobutanes led to four rac‐diastereoisomers, which were obtained in pure and crystalline state. The structures were elucidated by ¹⁹F‐NMR spectroscopy and confirmed by two X‐ray analyses. The cycloadditions were not stereospecific: e.g., (E)‐BTE furnished 73% trans‐adducts (with respect to the CF₃ groups) and 27% cis‐adducts. The loss of stereochemical integrity occurs in the intermediate gauche‐zwitterions which can cyclize or rotate, but not dissociate. Under extreme conditions (2M LiClO₄ in Et₂O, 70°, 3 months), the thermodynamic equilibrium of the four cyclobutanes was achieved. Considerations of Coulombic attraction and conformational strain in the zwitterionic intermediates allow us to rationalize the observed proportions of diastereoisomeric cyclobutanes. Ethyl vinyl ether and butyl vinyl ether furnished cyclobutanes in similar diastereoisomer ratios.     

Reactions of Methyl Diazoacetate with (E)‐ and (Z)‐1,2‐Bis(trifluoromethyl)ethene‐1,2‐dicarbonitrile: Novel and Unanticipated Pathways

The cycloadditions of methyl diazoacetate to 2,3‐bis(trifluoromethyl)fumaronitrile ((E)‐ BTE ) and 2,3‐bis(trifluoromethyl)maleonitrile ((Z)‐ BTE ) furnish the 4,5‐dihydro‐1H‐pyrazoles 13 . The retention of dipolarophile configuration proceeds for (E)‐ BTE with > 99.93% and for (Z)‐ BTE with > 99.8% (CDCl₃, 25°), suggesting concertedness. Base catalysis (1,4‐diazabicyclo[2.2.2]octane (DABCO), proton sponge) converts the cycloadducts, trans‐ 13 and cis‐ 13 , to a 94 : 6 equilibrium mixture (CDCl₃, r.t.); the first step is N‐deprotonation, since reaction with methyl fluorosulfonate affords the 4,5‐dihydro‐1‐methyl‐1H‐pyrazoles. Competing with the cis/trans isomerization of 13 is the formation of a bis(dehydrofluoro) dimer (two diastereoisomers), the structure of which was elucidated by IR, ¹⁹F‐NMR, and ¹³C‐NMR spectroscopy. The reaction slows when DABCO is bound by HF, but F^? as base keeps the conversion to 22 going and binds HF. The diazo group in 22 suggests a common intermediate for cis/trans isomerization of 13 and conversion to 22 : reversible ring opening of N‐deprotonated 13 provides 18 , a derivative of methyl diazoacetate with a carbanionic substituent. Mechanistic comparison with the reaction of diazomethane and dimethyl 2,3‐dicyanofumarate, a related tetra‐acceptor‐ethylene, brings to light unanticipated divergencies.     

Reactions of Sterically Hindered ‘Thiocarbonyl Ylides' with 1,2‐Bis(trifluoromethyl)ethene‐1,2‐dicarbonitrile: Isolation of a Cyclic Seven‐Membered Ketene Imine

When ‘thiocarbonyl ylide' 1A (=(2,2,4,4‐tetramethyl‐3‐oxocyclobutylidenesulfonio)methanide) is generated from the dihydrothiadiazole 5A by N₂ extrusion at 40° in the presence of 2,3‐bis(trifluoromethyl)fumaronitrile ((E)‐ 10 ), a cyclic seven‐membered ketene imine 11 and trans‐thiolane 12 are formed (81 : 19). The reaction of 1A with (Z)‐ 10 furnishes 11, 12 , and cis‐thiolane 25 in the ratio of 82 : 12 : 6. The strained ketene imine 11 is crystalline and storable as a consequence of the stabilizing ‘perfluoroalkyl effect'. The ketene imine group is stereogenic; 11 has a transoid structure with respect to the CF₃ groups, and there is no evidence for the cisoid diastereoisomer. Ketene imine 11 adds H₂O, MeOH, and PhNH₂. In solution at 60°, 11 undergoes an irreversible ring contraction, furnishing the thiolanes 12 / 25 98 : 2. The rate constant of this first‐order rearrangement increases 850‐fold, as the solvent polarity rises from cyclohexane to CD₃CN, in accordance with a zwitterionic intermediate. It is the same intermediate that is initially formed from 1A and 10 , and its intramolecular N‐ and C‐alkylation give rise to 11 and 12 + 25 , respectively. In contrast to 1A , thiocarbonyl ylide 27 , which harbors the sterically less‐demanding adamantylidene group, reacts with (E)‐ 10 to give trans‐thiolane 29 , but no ketene imine. The precursor 26 catalyzes the (Z)/(E) isomerization of 10 ((E)/(Z) ca. 95 : 5 at equilibrium), thus obviating conclusions on steric course and mechanism of this cycloaddition.     

Gold‐Catalyzed 1,2‐/1,2‐Bis‐acetoxy Migration of 1,4‐Bis‐propargyl Acetates: A Mechanistic Study

The late transition metal catalyzed rearrangement of propargyl acetates offers an interesting platform for the development of synthetically useful transformations. We have recently shown that gold complexes can catalyze a highly selective tandem 1,2‐/1,2‐bis‐acetoxy migration in 1,4‐bis‐propargyl acetates to form 2,3‐bis‐acetoxy‐1,3‐dienes. In this way, (1Z,3Z)‐ or (1Z,3E)‐ and (1E,3Z)‐1,3‐dienes could be obtained in a stereocontrolled manner depending on the electronic and steric features of the ancillary ligand bound to gold and the substituents at the propargylic positions. In this work, we report an experimental study on the scope of this transformation, plus a detailed theoretical examination of the reaction mechanism, which has revealed the key features responsible for the reaction stereoselectivity. Synthetic applications towards the one‐pot synthesis of quinoxaline heterocycles and tandem Diels–Alder processes have also been devised.     

Reactions of Di(tert‐butyl)diazomethane with Acceptor‐Substituted Ethylenes

Di(tert‐butyl)diazomethane ( 4 ) is a nucleophilic 1,3‐dipole with strong steric hindrance at one terminus. In its reaction with 2,3‐bis(trifluoromethyl)fumaronitrile ((E)‐ BTE ), a highly electrophilic tetra‐acceptor‐substituted ethene, an imino‐substituted cyclopentene 9 is formed as a 1 : 2 product. The open‐chain zwitterion 10 , assumed as intermediate, adds the second molecule of (E)‐ BTE . The ¹⁹F‐ and ¹³C‐NMR spectra allow the structural assignment of two diastereoisomers, 9A and 9B . The zwitterion 10 can also be intercepted by dimethyl 2,3‐dicyanofumarate ( 11 ) and furnishes diastereoisomeric cyclopentenes 12A and 12B ; an X‐ray‐analysis of 12B confirms the ‘mixed’ 1 : 1 : 1 product. Competing is an (E)‐ BTE ‐catalyzed decomposition of 4 to give 2,3,4,4‐tetramethylpent‐1‐ene ( 7 )+N₂; the reaction of (E)‐ BTE with a trace of water appears to be responsible for the chain initiation. The H₂SO₄‐catalyzed decomposition of diazoalkane 4 , indeed, produced the alkene 7 in high yield. The attack on the hindered diazoalkane 4 by 11 is slower than that by (E)‐ BTE ; the zwitterionic intermediate 21 undergoes cyclization and furnishes the tetrasubstituted furan 22 . In fumaronitrile, electrophilicity and steric demand are diminished, and a 1,3‐cycloaddition produces the 4,5‐dihydro‐1H‐pyrazole derivative 25 . The reaction of 4 with dimethyl acetylenedicarboxylate leads to pyrazole 29 +isobutene.     

1,2‐(Bis)trifluoromethylation of Alkynes: A One‐Step Reaction to Install an Underutilized Functional Group

Modifying the electronic properties of olefins is the quintessential approach to tuning alkene reactivity. In this context, the exploration of trifluoromethyl groups as divergent electronic modifiers has not been considered. In this work, we describe a copper‐mediated 1,2‐(bis)trifluoromethylation of acetylenes to create E‐hexafluorobutenes (E‐HFBs) under blue light in a single step. The reaction proceeds with high yield and E/Z selectivity. Since the alkyne captures two trifluoromethyl groups from each molecule of bpyCu(CF₃)₃, mechanistic studies were conducted to illuminate the role of the reactants. Interestingly, E‐HFBs exhibit remarkable stability to standard olefin functionalization reactions in spite of the pendant trifluoromethyl groups. This finding has significant implications for medicine, agroscience, and materials.     

Gold(I)‐Catalyzed Furan‐yne Cyclizations Involving 1,2‐Rearrangement: Efficient Synthesis of Functionalized 1‐Naphthols and Its Application to the Synthesis of Wailupemycin G

Gold‐catalyzed cascade cyclization/1,2‐rearrangement of 1‐(2‐furanyl)phenyl propargyl alcohols has been developed, which provides a rapid and efficient access to multisubstituted 1‐naphthols bearing an enal or enone moiety with high stereoselectivity. The (Z)‐ or (E)‐stereochemistry can be easily controlled by choosing protected‐ or non‐protected substrates. The utility of the methodology has been illustrated in the first total synthesis of wailupemycin G.     

Recyclable 1,2‐bis[3,5‐bis(trifluoromethyl)phenyl]diselane‐catalyzed oxidation of cyclohexene with H2O2: a practical access to trans‐1,2‐cyclohexanediol

1,2‐Bis[3,5‐bis(trifluoromethyl)phenyl]diselane‐catalyzed oxidation of cyclohexene by hydrogen peroxide affords a quick, clean and practical access to the important compound trans‐1,2‐cyclohexanediol under mild conditions. The highly atom‐economic properties, clean procedures, high reaction concentration, short reaction time, mild conditions and eco‐friendly, recyclable and low loading catalysts facilitate this methodology for possible future practical industrial production. Copyright © 2014 John Wiley & Sons, Ltd.     

Cycloaddition Reactions of 7‐Benzylidenecycloocta‐1,3,5‐triene with Ethenetetracarbonitrile and 4‐Phenyl‐3H‐1,2,4‐triazole‐3,5(4H)‐dione

An (E)/(Z) mixture (3 : 2) of 7‐benzylidenecycloocta‐1,3,5‐triene ( 5 ) is obtained when 1‐benzylcycloocta‐1,3,5,7‐tetraene ( 7 ), prepared by an improved procedure, is treated with t‐BuOK in THF. Alternatively, a ca. 9 : 1 mixture (E)/(Z)‐ 5 can be prepared in a Wittig reaction involving benzaldehyde and cycloocta‐2,4,6‐trien‐1‐ylidenetriphenylphoshorane ( 9 ). Treatment of (E)/(Z)‐ 5 88 : 12 with ethenetetracarbonitrile (TCNE) gave a complex mixture of products, from which seven mono‐adducts and two bis‐adducts were isolated (Sect. 2.2.1). Of the mono‐adducts, four are π4+π2 adducts: two ((E)‐ and (Z)‐isomers) are derived from valence tautomers of the two isomers of (E)/(Z)‐ 5 , while it is tentatively suggested that the other two (again (E)‐ and (Z)‐isomers) are formed from the intermediacy of a pentadienyl zwitterion (Sect. 2.3). The remaining three mono‐adducts, two of which are epimers, are π8+π2 adducts. It is suggested that they are derived from the intermediacy of homotropylium zwitterions (Sect. 2.3). For the two bis‐adducts, it is postulated that they are derived from an initial π2+π2 cycloaddition involving the homotropylium zwitterions followed by π4+π2 cycloaddition to the valence tautomer of each of the π2+π2 cycloadducts. With 4‐phenyl‐3H‐1,2,4‐triazole‐3,5(4H)‐dione ( 6 ), (E)/(Z)‐ 5 91 : 9 yielded two π4+π2 cycloadducts ((E)‐ and (Z)‐isomers) as well as two epimeric π8+π2 cycloadducts (Sect. 2.2.2). The intermediacy of pentadienyl (tentative suggestion) and homotropylium zwitterions accounts for the formation of the products (Sect. 2.3).     

Synthesis of New C2‐Symmetric Chiral Bisamides from (1S,2S)‐Cyclohexane‐1,2‐dicarboxylic Acid

A series of new C₂‐symmetric (1S,2S)‐cyclohexane‐1,2‐dicarboxamides was synthesized from (1S,2S)‐cyclohexane‐1,2‐dicarbonyl dichloride and N‐benzyl‐substituted aromatic amines, which were prepared from 2‐aminopyridine, 2‐chloroaniline, and 2‐aminophenol via imine formation with benzaldehyde and subsequent reduction with NaBH₄. (1S,2S)‐N,N′‐Dibenzyl‐N,N′‐bis[2‐(benzyloxy)phenyl]cyclohexane‐1,2‐dicarboxamide was converted to (1S,2S)‐N,N′‐dibenzyl‐N,N′‐bis(2‐hydroxyphenyl)cyclohexane‐1,2‐dicarboxamide via hydrogenolysis in the presence of Pd(OH)₂ on active carbon powder.     

Insertion Reactions of 1,2‐Disubstituted Olefins with an α‐Diimine Palladium(II) Complex

The migratory insertions of cis or trans olefins CH(X)?CH(Me) (X = Ph, Br, or Et) into the metal–acyl bond of the complex [Pd(Me)(CO)(ⁱPr₂dab)]⁺ [B{3,5‐(CF₃)₂C₆H₃}₄]^? ( 1 ) (ⁱPr₂dab = 1,4‐diisopropyl‐1,4‐diazabuta‐1,3‐diene = N,N′‐(ethane‐1,2‐diylidene)bis[1‐methylethanamine]) are described (Scheme 1). The resulting five‐membered palladacycles were characterized by NMR spectroscopy and X‐ray analysis. Experimental data reveal some important aspects concerning the regio‐ and stereochemistry of the insertion process. In particular, the presence of a Ph or Br substituent at the alkene leads to the formation of highly regiospecific products. Moreover, in all cases, the geometry of the substituents in the formed palladacycle was the same as in the starting olefin, as a consequence of a cis addition of the Pd–acyl fragment to the C?C bond. Reaction with CO and MeOH of the five‐membered complex derived from trans‐β‐methylstyrene (= [(1E)‐prop‐1‐enyl]benzene) insertion, yielded the 2,3‐substituted γ‐keto ester 9 with an (2RS,3SR)‐configuration (Scheme 3).     

A New Monomer for π‐Conjugated Polymers — Synthesis and Characterization of Bis((Z)‐5‐phenyl‐2‐phenylmethylidene‐1, 3‐dithiole‐4‐yl)monosulfane

Bis((Z)‐5‐phenyl‐2‐phenylmethylidene‐1, 3‐dithiole‐4‐yl)monosulfane ( 6 ), a molecule consisting of two diphenyldithiafulvene units connected by a sulfur bridge, was synthesized by the selective lithiation of (Z)‐4‐phenyl‐2‐phenylmethylidene‐1, 3‐dithiole ( 7a ) at the endocyclic double bond and by subsequent reaction of the lithiated intermediate with bis(phenylsulfonyl)sulfane. Since this reaction sequence proceeded with retention of configuration, of three possible isomers (E, E, Z, E, and Z, Z) only the Z, Z form was obtained. On the basis of the X‐ray structure analysis and the NMR‐spectroscopic characterization of 6 supplemented by the NMR parameters of (E)‐ and (Z)‐4‐phenyl‐2‐phenylmethylidene‐1, 3‐dithiole, it was demonstrated that two characteristic ⁵J coupling constants of the proton at the exocyclic double bond indicate the configuration (Z or E) of disubstituted dithiafuvene derivatives.     

Nickel‐Catalyzed Synthesis of N‐Aryl‐1,2‐dihydropyridines by [2+2+2] Cycloaddition of Imines with Alkynes through T‐Shaped 14‐Electron Aza‐Nickelacycle Key Intermediates

Despite there being a straightforward approach for the synthesis of 1,2‐dihydropyridines, the transition‐metal‐catalyzed [2+2+2] cycloaddition reaction of imines with alkynes has been achieved only with imines containing an N‐sulfonyl or ‐pyridyl group. Considering the importance of 1,2‐dihydropyridines as useful intermediates in the preparation of a wide range of valuable organic molecules, it would be very worthwhile to provide novel strategies to expand the scope of imines. Herein we report a successful expansion of the scope of imines in nickel‐catalyzed [2+2+2] cycloaddition reactions with alkynes. In the presence of a nickel(0)/PCy₃ catalyst, a reaction with N‐benzylidene‐P,P‐diphenylphosphinic amide was developed. Moreover, an application of N‐aryl imines to the reaction was also achieved by adopting N‐heterocyclic carbene ligands. The isolation of an (η²‐N‐aryl imine)nickel(0) complex containing a 14‐electron nickel(0) center and a T‐shaped 14‐electron five‐membered aza‐nickelacycle is shown. These would be considered as key intermediates of the reaction. The structure of these complexes was unambiguously determined by NMR spectroscopy and X‐ray analyses.     

An Efficient One‐Pot Four‐Component Synthesis of Functionalized Imidazo[1,2‐a]pyridines

An efficient one‐pot four‐component protocol for the synthesis of imidazo[1,2‐a]pyridines was developed by condensing ethane‐1,2‐diamine ( 2 ), 1,1‐bis(methylthio)‐2‐nitroethene ( 1 ), aldehydes 3 , and activated methylene compounds in EtOH under reflux conditions (Tables 1–3). The features of this procedure are operational simplicity, good yields of products, in situ preparation of heterocyclic ketene aminals (HKA), and catalyst‐free conditions.     

Synthesis and antiproliferative activity of (Z + E)‐1‐[4‐(2‐(cyclopentadienyltricarbonylmanganese)‐2‐oxo‐ethoxy)phenyl]‐1,2‐di(p‐hydroxyphenyl)‐but‐1‐ene against breast cancer cells

This paper describes the synthesis of (Z + E)‐1‐[4‐(2‐(cyclopentadienyltricarbonylmanganese)‐2‐oxo‐ethoxy)phenyl]‐1,2‐di(p‐hydroxyphenyl)‐but‐1‐ene. Two synthetic pathways were explored. The best pathway consisted of the alkylation of 1,2‐bis‐[4‐(tert‐butyl‐dimethylsilyloxy)phenyl]‐1‐(4‐hydroxyphenyl)but‐1‐ene with BrCH₂COOEt. The ester obtained was transformed into the Weinreb amide by reaction with HN(OMe)Me–HCl. The reaction of lithium manganese tricarbonylcyclopentadienide with the Weinreb amide produced 1‐[4‐(2‐(cyclopentadienyltricarbonylmanganese)‐2‐oxo‐ethoxy)phenyl]‐1,2‐di(p‐tert‐butyldimethylsiloxyphenyl)‐but‐1‐ene. The deprotection of phenolic functions of the latter compound led to the formation of the final compound. The Z and E isomers could be separated but the isomerization of these isomers from one to another is an easy process. The Z + E compound 2 was tested against the hormone‐dependent MCF‐7 and hormone‐independent MDA‐MB‐231 breast cancer cell lines. The IC₅₀ values of compound 2 were 4.80 ± 2.00 µm and 4.79 ± 0.70 µm for MCF‐7 cells and MDA‐MB‐231 cells, respectively, which was three times better than the ferrocenyl analogue. Copyright © 2012 John Wiley & Sons, Ltd.     

Palladium‐Catalyzed Annulation of 1,2‐Diborylalkenes and ‐Arenes with 1‐Bromo‐2‐[(Z)‐2‐bromoethenyl]arenes: A Modular Approach to Multisubstituted Naphthalenes and Fused Phenanthrenes

(Z)‐1,2‐Diaryl‐1,2‐bis(pinacolatoboryl)ethenes underwent double‐cross‐coupling reactions with 1‐bromo‐2‐[(Z)‐2‐bromoethenyl]arenes in the presence of [Pd(PPh₃)₄] as a catalyst and 3 M aqueous Cs₂CO₃ as a base in THF at 80 °C. The double‐coupling reaction gave multisubstituted naphthalenes in good to high yields. Annulation of 1,2‐bis(pinacolatoboryl)arenes with bromo(bromoethenyl)arenes in the presence of a catalyst system that consisted of [Pd₂(dba)₃] (dba=dibenzylideneacetone) and 2‐dicyclohexylphosphino‐2′,6′‐dimethoxybiphenyl (SPhos) under the same conditions produced fused phenanthrenes in good to high yields. The first annulation coupling occurred regiospecifically at the bromoethenyl moiety. This procedure is applicable to the facile synthesis of polysubstituted anthracenes, benzothiophenes, and dibenzoanthracenes through a double annulation pathway by using the corresponding dibromobis[(Z)‐2‐bromoethenyl]benzenes as diboryl coupling partners.     

Highly Stereoselective Synthesis of 1,2‐Diorganothio‐1‐alkenes via Hydrothiolation of Alkynyl Sulfides Catalyzed by Cesium Hydroxide

In the presence of catalytic amount of cesium hydroxide, the hydrothiolation of alkynyl sulfides occurred at room temperature in DMF under nitrogen atmosphere to afford exclusive (Z)‐1,2‐diorganothio‐1‐alkene in excellent yields. It could provide a new and expedient way for the preparation of symmetrical and unsymmetrical (Z)‐1,2‐diorganolthio1‐1‐alkenes.     

One‐Pot Synthesis of Novel Pyrrolo[1,2‐a]quinoxaline‐4(5H)‐ones Using Benzene‐1,2‐diamine,Acetylenedicarboxylates, and β‐Nitrostyrene Derivatives

The reaction between a variety of o‐phenylenediamines (=benzene‐1,2‐diamines), dialkyl acetylenedicarboxylates, and derivatives of nitrostyrene (=(E)‐(2‐nitroethenyl)benzene) in the presence of sulfamic acid (SA; H₃NSO₃) as catalyst led to the corresponding pyrrolo[1,2‐a]quinoxaline‐4(5H)‐one derivatives in high yields.     

1,2‐Oxazine N‐Oxides as Catalyst Resting States in Michael Additions of Aldehydes to Nitro Olefins Organocatalyzed by α,α‐Diphenylprolinol Trimethylsilyl Ether

By combining enamines, derived from aldehydes and diphenylprolinol trimethylsilyl ether (the Hayashi catalyst), with nitroethenes ((D₆)benzene, 4‐Å molecular sieves, room temperature) intermediates of the corresponding catalytic Michael‐addition cycles were formed and characterized (IR, NMR, X‐ray analysis; Schemes 3–6 and Fig. 1–3). Besides cyclobutanes 2 , 1,2‐oxazine N‐oxide derivatives 3 – 6 and 8 have been identified for the first time, some of which are very stable compounds. It may not be a lack of reactivity (between the intermediate enamines and nitro olefins) that leads to failure of the catalytic reactions (Schemes 3–5) but the high stability of catalyst resting states. The central role zwitterions play in these processes is discussed (Schemes 1 and 2).