Construction and Application of Flow Enzymatic Biosensor Based of Silver Solid Amalgam Electrode for Determination of Sarcosine

In this paper, the flow amperometric enzymatic biosensor based on polished silver solid amalgam electrode for determination of sarcosine in model sample under flow injection analysis conditions is presented. The biosensor works on principle of electrochemical detection of oxygen decrease during enzymatic reaction which is directly proportional to the concentration of sarcosine in sample. The whole preparation process takes about 3 h. The RSD of repeatability of 10 consecutive measurements is 1.6 % (c_sarcosine=1.0×10^?4 mol dm^?3). Under optimal conditions the calibration dependence was linear in the range 7.5×10^?6–5.0×10^?4 mol dm^?3 and limit of detection was 2.0×10^?6 mol dm^?3.     

One‐Step Synthesis of β‐Cyclodextrin Functionalized Graphene/Ag Nanocomposite and Its Application in Sensitive Determination of 4‐Nitrophenol

β‐Cyclodextrin functionalized graphene/Ag nanocomposite (β‐CD/GN/Ag) was prepared via a one‐step microwave treatment of a mixture of graphene oxide and AgNO₃. β‐CD/GN/Ag was employed as an enhanced element for the sensitive determination of 4‐nitrophenol. A wide linear response to 4‐nitrophenol in the concentration ranges of 1.0×10^?8–1.0×10^?7 mol/L, and 1.0×10^?7–1.5×10^?3 mol/L was achieved, with a low detection limit of 8.9×10^?10 mol/L (S/N=3). The mechanism and the heterogeneous electron transfer kinetics of the 4‐nitrophenol reduction were discussed according to the rotating disk electrode experiments. Furthermore, the sensing platform has been applied to the determination of 4‐nitrophenol in real samples.     

IONIC STRENGTH EFFECTS ON THE GROUND STATE COMPLEXATION and TRIPLET STATE ELECTRON TRANSFER REACTION BETWEEN ROSE BENGAL and METHYL VIOLOGEN

Abstract— The equilibrium constants, K_c, for complexation between methyl viologen dication (MV²+) and Rose Bengal, or Eosin Y, decrease with increasing ionic strength. At zero ionic strength K_c is 6500 (± 500) mol^?1 dm³ for Rose Bengal and 3200 (± 200) mol^?1 dm³ for Eosin Y, and these values decrease to 1500 (± 100) and 680 (± 40) mol^?1 dm³, respectively, at an ionic strength of 0.1 mol dm^?3. K_c is independent of pH between 4.5 and 10. ΔH is -25 (± 1) kJ mol^?1 for complexation with either dye, whereas ΔS is -15 (± 3) J K^?1 mol^?1 for Rose Bengal, and - 23 (± 3) J K^?1 mol^?1 for Eosin Y. The complexation constant for Rose Bengal and the neutral viologen, 4,4'-bipyridinium-N, N'-di(propylsulphonate), (4,4'-BPS), is 420 (± 35) mol^?1 dm³, and independent of ionic strength. No complexation could be observed for either Rose Bengal or Eosin with another neutral viologen, 2,2'-bipyridinium-N,N'-di(propylsulphonate), (2,2'-BPS). MV²+ quenches the triplet state of Rose Bengal with a rate constant of 7 × 10⁹ mol^?1 dm³ s^?1, and this rate constant decreases slightly as ionic strength increases. The cage escape yield following quenching, Φ_cc is very low (Φ_cc= 0.02 (± 0.005), and independent of ionic strength. 4,4'-BPS quenches the triplet state of Rose Bengal with a rate constant of 2.2 (± 0.1) × 10⁹ mol^?1 dm³ s^?1, and gives a cage escape yield of 0.033 (± 0.006). 2,2'-BPS quenches the Rose Bengal triplet with a rate constant of 6 (± 1) × 10⁸ mol^?1 dm³ s^?1 and gives a cage escape yield of 0.07 (± 0.01). Conductivity measurements indicate that MV²+(Cl^?)₂ is completely dissociated at concentrations below 2 × 10^?2 mol dm^?3.     

Fullerene‐β‐Cyclodextrin Conjugate Based Electrochemical Sensing Device for Ultrasensitive Detection of p‐Nitrophenol

The article describes the use of a fullerene (C₆₀)‐β‐cyclodextrin conjugate, synthesized via 1,3‐dipolar cycloaddition, for the ultrasensitive electrochemical detection of p‐nitrophenol. This conjugate was successfully immobilized on the surface of a glassy carbon electrode and the developed device showed high activity towards p‐nitrophenol due to the synergetic effect of C₆₀, the latter becoming highly conductive upon reduction. The determination of p‐nitrophenol was performed by using square wave voltammetry over a concentration range from 2.8×10^?9 mol L^?1 to 4.2×10^?7 mol L^?1 and the detection limit was calculated to be 1.2×10^?9 mol L^?1.     

Effect of Toxic Metal Ions on Photosensitized Singlet Oxygen Generation for Photodegradation of Polyaromatic Hydrocarbon Derivatives and Inactivation of Escherichia coli

Here, we report an experimental study of the effect of toxic metal ions on photosensitized singlet oxygen generation for photodegradation of PAH derivatives, Anthracene‐9,10‐dipropionic acid disodium salt (ADPA) and 1,5‐dihydroxynapthalene (DHN) and photoinactivation of Escherichia coli bacteria by using cationic meso‐tetra(N‐methyl‐4‐pyridyl)porphine tetrachloride (TMPyP) as a singlet oxygen photosensitizer. Three s‐block metals ions, such as Na⁺, K⁺ and Ca²⁺ and five toxic metals such as Cd²⁺, Cu²⁺, Hg²⁺, Zn²⁺ and Pb²⁺ were studied. The s‐block metal ions showed no change in the rate of photodegradation of ADPA or DHN by TMPyP, whereas a dramatic change in the photodegradation of ADPA and DHN was observed in the presence of toxic metals. The maximum photodegradation rate constants of ADPA and DHN were observed for Cd²⁺ ions [(3.91 ± 0.20) × 10^?3 s^?1 and (7.18 ± 0.35) × 10^?4 s^?1, respectively]. Strikingly, the photodegradation of ADPA and DHN was almost completely inhibited in the presence of Hg²⁺ ions and Cu²⁺ ions. A complete inhibition of growth of E. coli was observed upon visible light irradiation of E. coli solutions with TMPyP and toxic metal ions particularly, Cd²⁺, Hg²⁺, Zn²⁺ and Pb²⁺ ions, except for Cu²⁺ ions where a significantly slow inhibition of E. coli's growth was observed.     

Silver(I)‐Selective PVC Membrane Potentiometric Sensor Based on a Recently Synthesized Calix[4]arene

A new PVC membrane potentiometric sensor for Ag(I) ion based on a recently synthesized calix[4]arene compound of 5,11,17,23‐tetra‐tert‐butyl‐25,27‐dihydroxy‐calix[4]arene‐thiacrown‐4 is developed. The electrode exhibits a Nernstian response for Ag(I) ions over a wide concentration range (1.0×10^?2?1.0×10^?6 M) with a slope of 53.8±1.6 mV per decade. It has a relatively fast response time (5–10 s) and can be used for at least 2 months without any considerable divergence in potentials. The proposed electrode shows high selectivity towards Ag⁺ ions over Pb²⁺, Cd²⁺, Co²⁺, Zn²⁺, Cu²⁺, Ni²⁺, Sr²⁺, Mg²⁺, Ca²⁺, Li⁺, K⁺, Na⁺, NH₄⁺ ions and can be used in a pH range of 2–6. Only interference of Hg²⁺ is found. It is successfully used as an indicator electrode in potentiometric titration of a mixture of chloride, bromide and iodide ions.     

Voltammetric Determination of Selected Aminoquinolines Using Carbon Paste Electrode

Optimum conditions have been found for voltammetric determination of mutagenic 5‐aminoquinoline, 6‐aminoquinoline and 3‐aminoquinoline by differential pulse voltammetry and adsorptive stripping differential pulse voltammetry on carbon paste electrode. The lowest limits of determination were found for adsorptive stripping differential pulse voltammetry in 0.1 mol dm^?3 H₃PO₄ (5×10^?7 mol dm^?3 , 1×10^?7 mol dm^?3, and 1×10^?7 mol dm^?3 for 5‐aminoquinoline, 6‐aminoquinoline and 3‐aminoquinoline, respectively). The possibility to determine mixtures of 8‐aminoquinoline with 3‐aminoquinoline or 5‐aminoquinoline or 6‐aminoquinoline, and mixtures of 5‐aminoquinoline with 3‐aminoquinoline or 6‐aminoquinoline by differential pulse voltammetry was verified. Binary mixtures of 8‐aminoquinoline with 3‐aminoquinoline or 6‐aminoquinoline, and of 3‐aminoquinoline with 5‐aminoquinoline could be successfully analyzed.     

The determination of trace levels of aluminium by differential pulse polarography

The direct determination of aluminium in aqueous solutions by differential pulse polarography is described. If the pH is carefully controlled to 4.00 ± 0.01, there is a linear relationship between the peak height of the polarographic wave and the aluminium concentration up to 2.5 × 10^-5 mol dm^-3. The coefficient of variation is about 4% at the 10^-5 mol dm^-3 level. With increasing aluminium concentrations, the relationship ceases to be linear, and above 9 × 10^-5 mol dm^-3, the peak splits, probably because of hydrolysis and polymerisation. Na⁺, NH₄⁺, Mg²⁺ and Ca²⁺ interfere at levels 100 times greater than that of the aluminium whereas Fe²⁺, Fe³⁺, Cu²⁺, Zn²⁺, Ni²⁺, NO₃^-, ClO₄^-, Cl^- and SO₄^2- do not interfere.     

Kinetics and mechanism of promoted hydrolysis of 4‐nitrophenyl acetate by zinc(II)‐tripod: Different roles of mononuclear and trinuclear species

Coordination studies on Zn(II) complexes of 1,3,5‐tri(2,5‐diazahexyl)benzene (L) show that by comparison with the non‐deprotonation of complex ZnL in a 1:1 system, the three‐dimensional complexiaton decreases the pK_a of the Zn‐bound water molecule, that is, pK_a = 7.47 for trinulclear complex Zn₃L in a 3:1 metal–ligand ratio. These two types of zinc(II) complexes have been examined as catalysts for the hydrolysis of 4‐nitrophenyl acetate (NA) in 10% (v/v) CH₃CN at 298 K, I = 0.10 mol dm^?3 KNO₃ at pH range 6.5–8.2 and 8.5–10, respectively. Kinetic studies show that the second‐order rate constants of NA‐hydrolysis catalyzed by complexes ZnL, Zn₃L, and Zn₃LH_?1 are 0.021, 0.0082, and 0.342 mol^?1 dm³ s^?1, respectively. In all the cases, the pH‐dependent observed first‐order rate constant, k_obs, shows sigmoidal pH–rate profile. The 1:1 complex ZnL–H₂O undergoes NA hydrolysis by direct rate‐determining hydrolysis to produce 4‐nitrophenol(ate) (NP^?) and ZnL(OOCCH₃); while in the 3:1 system the oxygen atom of acetic group forms a H‐bond with the Zn(II)‐bound water of the second branch of tripod indicating that the polynuclear centers are associated and bi‐functional. © 2003 Wiley Periodicals, Inc. Int J Chem Kinet 36: 41–48 2004     

Binding of Copper(II) to Pectins by Electrochemical Methods

The interaction between Cu(II) and pectin extracted from citrus fruit was studied in KNO₃ 0.10 mol dm^?3 at 25 °C and pH 5.5, using ion selective electrode potentiometry and voltammetry, namely differential pulse polarography and square‐wave voltammetry. Although many independent variables may affect Cu(II)‐polymer interactions such as charge density, polymer concentration and copper to polymer concentration ratio, a good fitting was observed for the model with ML and ML₂ complex species, when M:L total concentration (mol dm^?3) ratio varies from 0.2 to 2.7 and the ligand concentration is in the range (0.2 to 1) g dm^?3, i.e., (0.4 to 2)×10^?3 mol COO^? dm^?3. The complex parameters found in these conditions were log β_CuL=3.5±0.1 and log β_CuL2= 8.0±0.2. For lower total ligand and total metal ion concentrations, used in voltammetry, the interaction Cu(II)‐pectin is affected by a cooperative mode (increase of metal ion‐ligand affinity) when the total metal ion concentration increases and by an anti‐cooperative mode when the total ligand concentration increases, possibly due to different conformations of the polymer.     

Naked eye detection of cadmium using inorganic–organic hybrid mesoporous material

A novel and low-cost optical sensor for the naked eye detection of Cd²⁺in aqueous media based on mesoporous silica containing 4-(2-pyridylazo)resorcinol (PAR) as a probe molecule anchored by N-trimethoxysilylpropyl-N,N,N-trimethylammonium chloride (TMAC) was prepared. The effects of various factors such as pH, solvent volume, temperature, reaction time, amount of the material, and the presence of various ions were studied in order to optimize operating conditions. The detection was based on the color change of PAR from orange-yellow to purple as a result of complexation with Cd²⁺. The intensity of the Cd-PAR complex varies linearly with the Cd²⁺concentration, from zero to 1.78×10⁻⁷ mol dm⁻³. The detection and quantification limits for the method when determining Cd²⁺ were 1.75×10⁻⁸ and 5.77×10⁻⁸ mol dm⁻³, respectively, with a correlation coefficient of 0.99. Good chemical stability of the material was observed for a period of five months. The developed sensor was applied to the analysis of various industrial effluents and tap water samples. Electronic supplementary material Supplementary material is available for this article at     

Syntheses and Crystal Structures of Two Cadmium Methanetetrabenzoates Featured by Open Framework and Infinite Layers

Colorless single crystals of Cd₂[μ₈‐MTB] · 3H₂O · DMF ( 1 ) were prepared in DMF/H₂O solution [ 1 : space group C2/c (no. 15) with a = 1821.30(6), b = 2175.08(6), c = 1269.87(4) pm, β = 129.684(1)°]. The connection between the methane‐p‐benzoate tetraanions (MTB^4–) and the Cd²⁺ cations leads to a three‐dimensional framework with channels extending along [1 10] and [110] with openings of 670 pm × 360 pm. The channel‐like voids accommodate water molecules and N,N‐dimethylformamide (DMF) molecules not bound to Cd²⁺. Colorless single crystals of [Cd₄(2,2′‐bipy)₄(μ₇‐MTB)₂] · 7DMF ( 2 ) were prepared in DMF in the presence of 2,2′‐bipyridine [ 2 : space group P1 (no. 2) with a = 1224.84(4), b = 1418.85(5), c = 2033.49(4) pm, α = 85.831(2)°, β = 88.351(2)°, γ = 68.261(1)°]. The coordination of MTB^4– to Cd²⁺ results in infinite layers parallel to (001). The layers, not connected by any hydrogen bonds, contain small openings of about 320 pm × 340 pm.     

A Coated Graphite Thorium‐Ion Selective Potentiometric Sensor Based on a Calix[4]arene Bearing Phosphoryl Groups

5,11,17,23‐Tetra‐tert‐butyl‐25,26,27,28‐tetrakis(diphenylphosphinoylmethoxy)calix[4]arene ( 1 )has been used for the preparation of a graphite coated thorium ion‐selective electrode (Th⁴⁺‐ISE). The plasticized PVC membrane containing 30% PVC, 58% ortho‐nitrophenyloctylether (NPOE), 4% sodium tetraphenylborate (NaTPB) and 8% ionophore was directly coated on a graphite rod. This sensor gave good Nernstian responses with a slope of 15.5 ± 0.1 mV/decade over a concentration range of 1 × 10^?5 ?1 × 10^?3 M of thorium ions with a limit of detection of 7.9 × 10^?6 M. The dynamic response time of the electrode to achieve a steady potential was found to be about 15 seconds. The potential of the prepared sensor was independent of the pH variation in the range 2.3–4.0. The selectivity relative to several mono‐, di‐ and tri‐valent metal ions, i.e. Li⁺, Na⁺, K⁺, Ag⁺, NH₄⁺, Sr²⁺, Mn²⁺, Fe²⁺, Co²⁺, Ni²⁺, Cu²⁺, Zn²⁺, Cd²⁺, La³⁺, Sm³⁺, Dy³⁺, Er³⁺ and Y³⁺ was examined. This electrode can be used for 6 months without any considerable divergences in the potential response. The sensor was successfully used as an indicator electrode for the potentiometric titration of a thorium solution using a standard solution of EDTA.     

A New Silver(I) Potentiometric Sensor Based on a Calix[4]arene Substituted at the Narrow Rim by Amide/Phosphoryl Groups

A coated‐wire type silver ion‐selective electrode has been constructed using a modified p‐tert‐butyl‐calix[4]arene by amide‐phosphoryl groups, named 5, 11, 17, 23‐tetra‐tert‐butyl‐25, 27‐bis(diethylcarbamoylmethoxy)‐26,28‐bis(diphenylphosphinoylmethoxy)calix[4]arene (Calix), as neutral carrier. A plasticized PVC membrane containing 30% PVC, 60% ortho‐nitrophenyloctylether (NPOE), 2% sodium tetraphenylborate (NaTPB) and 8% “Calix” was coated on a graphite rod. The prepared electrode exhibited a linear Nernstian response over the range 1 × 10^?6 to 1 × 10^?2 M with a slope 58.4 (±0.2) mV per decade change and a detection limit of 6.3 × 10^?7 M. The working pH range of the sensor is 4‐6.7. It is found that the dynamic response time of the electrode to achieve a steady potential was very fast (～11 s). The selectivity of the sensor relative to NH₄⁺, Li⁺, Na⁺, K⁺, Ca²⁺, Sr²⁺, Ba²⁺, Mn²⁺, Pb²⁺, Co²⁺, Ni²⁺, Cu²⁺, Zn²⁺, Cd²⁺, Fe³⁺, La³⁺, Sm³⁺ and Th⁴⁺ was examined. The prepared electrode exhibits adequate stability with good reproducibility (57.6 ± 0.5 mV per decade change for 10 weeks). It was successfully used as an indicator electrode in potentiometric titration of silver ions with standard solution of EDTA. The sensor was also used for silver ion measurements in various synthetic samples.     

Electrochemical Behavior and Determination of L‐Tyrosine at Single‐walled Carbon Nanotubes Modified Glassy Carbon Electrode

Based on single‐walled carbon nanotubes (SWCNTs) modified glassy carbon electrode (GCE/SWCNTs), a novel method was presented for the determination of L ‐tyrosine. The GCE/SWCNTs exhibited remarkable catalytic and enhanced effects on the oxidation of L ‐tyrosine. In 0.10 mol/L citric acid‐sodium citrate buffer solution, the oxidation potential of L ‐tyrosine shifted negatively from +1.23 V at bare GCE to +0.76 V at GCE/SWCNTs. Under the optimized experimental conditions, the linear range of the modified electrode to the concentration of L ‐tyrosine was 5.0×10^?6–2.0×10^?5 mol/L (R₁=0.9952) and 2.7×10^?5–2.6×10^?4 mol/L (R₂=0.9998) with a detection limit of 9.3×10^?8 mol/L. The kinetic parameters such as α (charge transfer coefficient) and D (diffusion coefficient) were evaluated to be 0.66, 9.82×10^?5 cm² s^?1, respectively. And the electrochemical mechanism of L ‐tyrosine was also discussed.     

Prussian Blue‐Modified Titanate Nanotubes: A Novel Nanostructured Catalyst for Electrochemical Reduction of Hydrogen Peroxide

Prussian blue (PB) modified titanate nanotubes (PB‐TiNT) have been synthesized by the reaction of Fe²⁺‐modified TiNT with hexacyanoferrate(III) ions. The rate constant for heterogeneous catalytic reaction between PB‐TiNT and H₂O₂ was found to be k=2×10⁴ dm³ mol^?1 s^?1, which is an order of magnitude higher than the values of k reported for conventionally prepared, electrochemically deposited PB films. On the PB‐TiNT modified electrode with subnanomolar surface concentration of PB (Γ(PB)=2.8×10^?11 mol/cm²), a stable, reproducible and linear response towards H₂O₂ was obtained in the concentration range 0.02–4 mM, with the sensitivity of 0.10 AM^?1 cm^?2 at ?150 mV.     

Selective Determination of Zn2+ Ion in Various Environmental,Biological and Medicinal Plant Samples Using a Novel Coated Graphite Electrode

Novel Zn²⁺ ion‐selective PVC based coated graphite electrodes were fabricated using the ionophores N‐((1H‐indol‐3‐yl)methylene)thiazol‐2‐amine (I₁), N‐((1H‐indol‐3‐yl)methyl)‐thiazol‐2‐amine (I₂) and 1‐((1H‐indol‐3‐yl)methylene)urea (I₃). Their potentiometric performance was examined in dependence of the addition of plasticizers and anion excluders and compared. It is found that the coated graphite electrode with the composition I₁:KTpClPB:o‐NPOE:PVC=9 : 1.5 : 51 : 38.5 is the best with respect to the wide working concentration range (4.2×10^?8–1.0×10^?1 mol L^?1), low detection limit (1.6×10^?8 mol L^?1) and wide pH range of 3.0–8.0. The proposed electrode was successfully applied to quantify Zn²⁺ in various environmental, biological and medicinal plant samples and used as indicator electrode.     

A Lead‐Selective Membrane Electrode Based Upon a Phosphorylated Hexahomotrioxacalix[3]Arene

Solvent extraction of a mixture of Pb^II, Mn^II, Fe^III, Co^II, Ni^II and Cd^II in aqueous perchlorate medium by a phosphorylated hexahomotrioxacalix[3]arene (calix‐3) in dichloromethane shows a significant selectivity towards lead ions. The ligand can also be incorporated into a membrane to provide a new lead ion‐selective electrode (Pb^II‐ISE). A plasticized PVC membrane containing 30% PVC, 53.5% ortho‐nitrophenyloctylether (NPOE), 4.5% sodium tetraphenylborate (NaTPB) and 12% ionophore was directly coated on a graphite rod. This sensor gave a good Nernstian response of 29.7 ± 0.7 mV decade^?1 over a concentration range of 1 × 10^?8 – 1 × 10^?4 M of lead ions, independent of pH in the range 3‐7, with a detection limit of 0.4 × 10^?8 M. The dynamic response time of the electrode to achieve a steady potential was very fast and found to be less than 7 s. The selectivity relative to Ag⁺, NH₄⁺, Li⁺, Na⁺, K⁺, Ca²⁺, Sr²⁺, Ba²⁺, Mn²⁺, Fe²⁺, Co²⁺, Ni²⁺, Cu²⁺, Zn²⁺, Cd²⁺, Fe³⁺, La³⁺, Sm³⁺, Dy³⁺, Er³⁺, Y³⁺ and Th⁴⁺ was examined. The electrode exhibits adequate stability with good reproducibility (with a slope of 29.6 ± 1.5 mV for 8 weeks). The characteristics of the sensor are compared with those of a tetraphosphorylated calix[4]arene (calix‐4) based Pb^II‐ISE, reported recently. The electrode was successfully used as an indicator electrode for a potentiometric titration of a lead solution using a standard solution of EDTA. The applicability of the sensor for lead ion measurements in various synthetic samples was also investigated.     

Kinetic model of induced codeposition of Ni-Mo alloys

The kinetic model of induced codeposition of nickel-molybdenum alloys from ammoniun citrate solution was studied on rotating disk electrodes to predict the behavior of the electrode-position. The molybdate (MoO42-) could be firstly electro-chemically reduced to MoO2, and subsequently undergoes a chemical reduction with atomic hydrogen previously adsorbed on the inducing metal nickel to form molybdenum in alloys. The kinetic equations were derived, and the kinetic parameters were obtained from a comparison of experimental results and the kinetic equations. The electrochemical rate constants for discharge of nickel, molybdenum and water could been expressed as k1(E) = 1. 23 × 109 CNi exp( - 0.198FE/RT) mol/(dm2·s), k2(E) =3.28× 10-10 CMoexp( - 0. 208FE/ RT) mol/(dm2·s) and k3(E) = 1.27 × 10-6exp( - 0.062FE/ RT) mol/(dm2 · s), where CNi and CMo are the concentrations of the nickel ion and molybdate, respectively, and E is the applied potential vs. saturated calomel electrode (SCE). The codeposition p