Hybrid Organic–Inorganic Antiperovskites

Substitution of A‐site and/or X‐site ions of ABX₃‐type perovskites with organic groups can give rise to hybrid perovskites, many of which display intriguing properties beyond their parent compounds. However, this method cannot be extended effectively to hybrid antiperovskites. Now, the design of hybrid antiperovskites under the guidance of the concept of Goldschmidt's tolerance factor is presented. Spherical anions were chosen for the A and B sites and spherical organic cations for the X site, and seven hybrid antiperovskites were obtained, including (F₃(H₂O)_x)(AlF₆)(H₂dabco)₃, ((Co(CN)₆)(H₂O)₅)(MF₆)(H₂dabco)₃ (M=Al³⁺, Cr³⁺, or In³⁺), (Co(CN)₆)(MF₆)(H₂pip)₃ (M=Al³⁺ or Cr³⁺), and (SbI₆)(AlF₆)(H₂dabco)₃. These new structures reveal that all ions at A, B, and X sites of inorganic antiperovskites can be replaced by molecular ions to form hybrid antiperovskites. This work will lead to the synthesis of a large family of hybrid antiperovskites.     

Chitosan Bio‐Based Organic–Inorganic Hybrid Aerogel Microspheres

Recently, organic–inorganic hybrid materials have attracted tremendous attention thanks to their outstanding properties, their efficiency, versatility and their promising applications in a broad range of areas at the interface of chemistry and biology. This article deals with a new family of surface‐reactive organic–inorganic hybrid materials built from chitosan microspheres. The gelation of chitosan (a renewable amino carbohydrate obtained by deacetylation of chitin) by pH inversion affords highly dispersed fibrillar networks shaped as self‐standing microspheres. Nanocasting of sol–gel processable monomeric alkoxides inside these natural hydrocolloids and their subsequent CO₂ supercritical drying provide high‐surface‐area organic–inorganic hybrid materials. Examples including chitosan–SiO₂, chitosan–TiO₂, chitosan–redox‐clusters and chitosan–clay‐aerogel microspheres are described and discussed on the basis of their textural and structural properties, thermal and chemical stability and their performance in catalysis and adsorption.     

Hybrid Organic–Inorganic Thermoelectric Materials and Devices

Hybrid organic–inorganic materials have been considered as a new candidate in the field of thermoelectric materials since the last decade owing to their great potential to enhance the thermoelectric performance by utilizing the low thermal conductivity of organic materials and the high Seebeck coefficient, and high electrical conductivity of inorganic materials. Herein, we provide an overview of interfacial engineering in the synthesis of various organic–inorganic thermoelectric hybrid materials, along with the dimensional design for tuning their thermoelectric properties. Interfacial effects are examined in terms of nanostructures, physical properties, and chemical doping between the inorganic and organic components. Several key factors which dictate the thermoelectric efficiency and performance of various electronic devices are also discussed, such as the thermal conductivity, electric transportation, electronic band structures, and band convergence of the hybrid materials.     

Hybrid Organic–Inorganic Silica Gel Carriers with Controlled Drug‐Delivery Properties

Pure and modified silica materials were synthesised by a sol–gel process and used as carrier for the controlled release of ibuprofen, selected as model drug. A one‐step synthesis was optimised for the preparation of various silica–drug composites by using tetraethoxysilane and 3‐aminopropyltriethoxysilane as precursors at different molar ratios. The presence of aminopropyl groups on the silica surface influences the drug‐delivery rate leading to a high degree the desorption process controlled.     

Amphiphilic Organic–Inorganic Hybrid Zeotype Aluminosilicate like a Nanoporous Crystallized Langmuir–Blodgett Film

A new organic–inorganic hybrid zeotype compound with amphiphilic one‐dimensional nanopore and aluminosilicate composition was developed. The framework structure is composed of double aluminosilicate layers and 12‐ring nanopores; a hydrophilic layer pillared by Q² silicon atom species and a lipophilic layer pillared by phenylene groups are alternately stacked, and 12‐ring nanopores perpendicularly penetrate the layers. The framework topology looks similar to that of an AFI‐type zeolite but possesses a quasi‐multidimensional pore structure consisting of a 12‐ring channel and intersecting small pores equivalent to 8‐rings. The hybrid material with alternately laminated lipophilic and hydrophilic nanospaces can be assumed as a crystallized Langmuir–Blodgett film. It demonstrates microporous adsorption for both hydrophilic and lipophilic adsorptives, and its outer surface tightly adsorbs lysozyme whose molecular size is much larger than its micropore opening. Our results suggest the possibility of designing porous adsorbent with high amphipathicity.     

Organic–Inorganic Hybrid Zinc Phosphate with 28‐Ring Channels

An organic–inorganic hybrid zinc phosphate with 28‐ring channels was synthesized by use of an organic ligand instead of organic amine template under a hydro(solvo)thermal condition. This crystalline zinc phosphate contains large channels constructed from 28 zinc and phosphate tetrahedral units. The walls of the channels consist of two types of zincophosphate chains, in which the Zn atoms are coordinated by 2,4,5‐tri(4‐pyridyl)‐imidazole ligands as pendent groups. This compound exhibits yellow emission and interesting properties of removing cobalt, cadmium, and mercury cations from aqueous solution. A new two‐dimensional organic–inorganic hybrid zincophosphate was also obtained by changing the solvent mixture ratios in the synthesis.     

(CH3NH3)2PdCl4: A Compound with Two‐Dimensional Organic–Inorganic Layered Perovskite Structure

The synthesis of previously unknown perovskite (CH₃NH₃)₂PdCl₄ is reported. Despite using an organic cation with the smallest possible alkyl group, a 2D organic–inorganic layered Pd‐based perovskites was still formed. This demonstrates that Pd‐based 2D perovskites can be obtained even if the size of the organic cation is below the size limit predicted by the Goldschmidt tolerance‐factor formula. The (CH₃NH₃)₂PdCl₄ phase has a bulk resistivity of 1.4 Ω cm, a direct optical gap of 2.22 eV, and an absorption coefficient on the order of 10⁴ cm^?1. XRD measurements suggest that the compound is moderately stable in air, an important advantage over several existing organic–inorganic perovskites that are prone to phase degradation problems when exposed to the atmosphere. Given the recent interest in organic–inorganic perovskites, the synthesis of this new Pd‐based organic–inorganic perovskite may be helpful in the preparation and understanding of other organic–inorganic perovskites.     

Controllable Self‐Assembly of Organic–Inorganic Amphiphiles Containing Dawson Polyoxometalate Clusters

An organic–inorganic molecular hybrid containing the Dawson polyoxometalate, ((C₄H₉)₄N)₅H‐ [P₂V₃W₁₅O₅₉(OCH₂)₃CNHCOC₁₅H₃₁], was synthesized and its surfactant‐like amphiphilic properties, represented by the formation of bilayer vesicles, were studied in polar solvents. The vesicle size decreases with both decreasing hybrid concentration and with increasing polarity of the solvent, independently. The self‐assembly behavior of this hybrid can be controlled by introducing different counterions into the acetonitrile solutions. The addition of ZnCl₂ and NaI can cause a gradual decrease and increase of vesicular sizes, respectively. Tetraalkylammonium bromide is found to disassemble the vesicle assemblies. Moreover, the original counterions of the hybrid can be replaced with protons, resulting in pH‐dependent formation of vesicles in aqueous solutions. The hybrid surfactant can further form micro‐needle structures in aqueous solutions upon addition of Ca²⁺ ions.     

Two Organic–Inorganic Hybrid 3D {P5W30}‐Based Heteropolyoxotungstates with Transition‐Metal/Ln–Carboxylate–Ln Connectors

Two unique organic–inorganic hybrid polyoxometalates constructed from Preyssler‐type [Na(H₂O)P₅W₃₀O₁₁₀]^14? ({P₅W₃₀}) subunits and TM/Ln–carboxylate–Ln connectors (TM=transition metal, Ln=lanthanide), KNa₇[{Sm₆Mn(μ‐H₂O)₂(OCH₂COO)₇(H₂O)₁₈}{Na(H₂O)P₅W₃₀O₁₁₀}] ? 22 H₂O ( 1 ) and K₄[{Sm₄Cu₂(gly)₂(ox)(H₂O)₂₄}{NaP₅W₃₀O₁₁₀}]Cl₂ ? 25 H₂O ( 2 ; gly=glycine, ox=oxalate) have been hydrothermally synthesized and characterized by elemental analyses, IR spectra, UV/Vis‐NIR spectra, thermogravimetric analyses, power X‐ray diffraction, and single‐crystal X‐ray diffraction. Compound 1 displays one interesting 3D framework built by three types of subunits, {P₅W₃₀}, [Sm₂Mn(μ‐H₂O)₂(OCH₂COO)₂(H₂O)₅]⁴⁺, and [Sm₄(OCH₂COO)₅ (H₂O)₁₃]²⁺, whereas 2 also manifests the other intriguing 3D architecture created by three types of subunits, {P₅W₃₀}, [SmCu(gly)(H₂O)₈]⁴⁺, and [Sm₂(ox)(H₂O)₈]⁴⁺. To our knowledge, 1 and 2 are the first 3D frameworks that contain {P₅W₃₀} units and TM/Ln–carboxylate–Ln connectors. The fluorescent properties of 1 and 2 have been investigated.     

Organic–Inorganic Hybrid Saponites Obtained by Intercalation of Titano‐Silsesquioxane

The synthesis and characterization of two bifunctional composite materials based on synthetic saponite clays is here presented. These materials were prepared by intercalation of a Ti‐containing aminopropylisobutyl polyhedral oligomeric silsesquioxane (Ti‐NH₂POSS) in synthetic saponite samples containing interlayer sodium (Na‐SAP) or protons (H‐SAP). Hybrid organic–inorganic materials, Ti‐NHM‐1 and Ti‐NHM‐2, were obtained upon ion exchange. Structural, spectroscopic, and thermal properties of both hybrid materials were investigated in detail along with their catalytic activity in cyclohexene oxidation.     

Cooperative and FRET‐Assisted Brightness Enhancement in Oligo(phenylene ethynylene): Quantum Dot Organic–Inorganic Nanohybrids

Herein, we combine the ideas of concerted emission from fluorophore ensembles and its further amplification through FRET in an organic–inorganic hybrid approach. Spherical and highly fluorescent organic nanoparticles (FONPs, Φ_f=0.38), prepared by the self‐assembly of oligo(phenylene ethynylene) (OPE) molecules, were selected as a potential donor material. This organic core was then decorated with a shell of fluorescent CdSe/ZnS core–shell quantum dots (QDs; <d>?5.5 nm, Φ_f=0.27) with the aid of a bifunctional ligand, mercaptopropionic acid. Its high extinction coefficient (?≈4.1×10⁵ m ^?1 cm^?1) and good spectral match with the emission of the FONPs (J(λ)≈4.08×10¹⁶ m ^?1 cm^?1 nm⁴) made them a better acceptor candidate to constitute an efficient FRET pair (Φ_FRET=0.8). As a result, the QD fluorescence intensity was enhanced by more than twofold. The fundamental calculations carried out indicated an improvement in all the FRET parameters as the number of QDs around the FONPs was increased. This, together with the localization of multiple QDs in a nanometric dimension (volume≈1.8×10⁶ nm³), gave highly bright reddish luminescent hybrid particles as visualized under a fluorescence microscope.     

An Organic–Inorganic Hybrid Cathode Based on S–Se Dynamic Covalent Bonds

A diphenyl trisulfide–selenium nanowire (DPTS‐Se) organic–inorganic hybrid cathode material is presented for rechargeable lithium batteries. During discharge, three voltage plateaus associated with three lithiation processes are observed. During recharge, the combination of the radicals formed upon delithiation leads to several new phenyl sulfoselenide compounds which are confirmed by HPLC‐QTof‐MS. The hybrid cathode exhibits superior cycling stability over pristine Se or DPTS as cathode alone. The first discharge shows a capacity of 96.5 % of the theoretical specific capacity and the cell retains 69.2 % of the initial capacity over 250 cycles. The hybrid cathode also shows a high Coulombic efficiency of over 99 % after 250 cycles. This study demonstrates that the combination of organic polysulfide and selenium can not only improve the utilization of active materials but also enhance the cycling performance.     

An Unusual Phase Transition Driven by Vibrational Entropy Changes in a Hybrid Organic–Inorganic Perovskite

The driving forces for the phase transitions of ABX₃ hybrid organic–inorganic perovskites have been limited to the octahedral tilting, order–disorder, and displacement. Now, a complex structural phase transition has been explored in a HOIP, [CH₃NH₃][Mn(N₃)₃], based on structural characterizations and ab initio lattice dynamics calculations. This unusual first‐order phase transition between two ordered phases at about 265 K is primarily driven by changes in the collective atomic vibrations of the whole lattice, along with concurrent molecular displacements and an unusual octahedral tilting. A significant entropy difference (4.35 J K^?1 mol^?1) is observed between the low‐ and high‐temperature structures induced by such atomic vibrations, which plays a main role in driving the transition. This finding offers an alternative pathway for designing new ferroic phase transitions and related physical properties in HOIPs and other hybrid crystals.     

Multisite Organic–Inorganic Hybrid Catalysts for the Direct Sustainable Synthesis of GABAergic Drugs

Multisite organic–inorganic hybrid catalysts have been prepared and applied in a new general, practical, and sustainable synthetic procedure toward industrially relevant GABA derivatives. The domino sequence is composed of seven chemical transformations which are performed in two one‐pot reactions. The method produces both enantiomeric forms of the product in high enantiopurity as well as the racemate in good yields after a single column purification step. This protocol highlights major process intensification, catalyst recyclability, and low waste generation.