Metal@COFs: Covalent Organic Frameworks as Templates for Pd Nanoparticles and Hydrogen Storage Properties of Pd@COF-102 Hybrid Material

Three-dimensional covalent organic frameworks (COFs) have been demonstrated as a new class of templates for nanoparticles. Photodecomposition of the [Pd(η(3) -C(3) H(5) )(η(5) -C(5) H(5) )]@COF-102 inclusion compound (synthesized by a gas-phase infiltration method) led to the formation of the Pd@COF-102 hybrid material. Advanced electron microscopy techniques (including high-angle annular dark-field scanning transmission electron microscopy and electron tomography) along with other conventional characterization techniques unambiguously showed that highly monodisperse Pd nanoparticles ((2.4±0.5)?nm) were evenly distributed inside the COF-102 framework. The Pd@COF-102 hybrid material is a rare example of a metal-nanoparticle-loaded porous crystalline material with a very narrow size distribution without any larger agglomerates even at high loadings (30?wt?%). Two samples with moderate Pd content (3.5 and 9.5?wt?%) were used to study the hydrogen storage properties of the metal-decorated COF surface. The uptakes at room temperature from these samples were higher than those of similar systems such as Pd@metal-organic frameworks (MOFs). The studies show that the H(2) capacities were enhanced by a factor of 2-3 through Pd impregnation on COF-102 at room temperature and 20?bar. This remarkable enhancement is not just due to Pd hydride formation and can be mainly ascribed to hydrogenation of residual organic compounds, such as bicyclopentadiene. The significantly higher reversible hydrogen storage capacity that comes from decomposed products of the employed organometallic Pd precursor suggests that this discovery may be relevant to the discussion of the spillover phenomenon in metal/MOFs and related systems.     

Rational Design of MOF/COF Hybrid Materials for Photocatalytic H2 Evolution in the Presence of Sacrificial Electron Donors

Crystalline and porous covalent organic frameworks (COFs) and metal‐organic frameworks (MOFs) materials have attracted enormous attention in the field of photocatalytic H₂ evolution due to their long‐range order structures, large surface areas, outstanding visible light absorbance, and tunable band gaps. In this work, we successfully integrated two‐dimensional (2D) COF with stable MOF. By covalently anchoring NH₂‐UiO‐66 onto the surface of TpPa‐1‐COF, a new type of MOF/COF hybrid materials with high surface area, porous framework, and high crystallinity was synthesized. The resulting hierarchical porous hybrid materials show efficient photocatalytic H₂ evolution under visible light irradiation. Especially, NH₂‐UiO‐66/TpPa‐1‐COF (4:6) exhibits the maximum photocatalytic H₂ evolution rate of 23.41 mmol g^?1 h^?1 (with the TOF of 402.36 h^?1), which is approximately 20 times higher than that of the parent TpPa‐1‐COF and the best performance photocatalyst for H₂ evolution among various MOF‐ and COF‐based photocatalysts.     

Copper–Organic Framework Fabricated with CuS Nanoparticles: Synthesis,Electrical Conductivity,and Electrocatalytic Activities for Oxygen Reduction Reaction

To apply electrically nonconductive metal–organic frameworks (MOFs) in an electrocatalytic oxygen reduction reaction (ORR), we have developed a new method for fabricating various amounts of CuS nanoparticles (nano‐CuS) in/on a 3D Cu–MOF, [Cu₃(BTC)₂⋅(H₂O)₃] (BTC=1,3,5‐benzenetricarboxylate). As the amount of nano‐CuS increases in the composite, the electrical conductivity increases exponentially by up to circa 10⁹‐fold, while porosity decreases, compared with that of the pristine Cu‐MOF. The composites, nano‐CuS(x wt %)@Cu‐BTC, exhibit significantly higher electrocatalytic ORR activities than Cu‐BTC or nano‐CuS in an alkaline solution. The onset potential, electron transfer number, and kinetic current density increase when the electrical conductivity of the material increases but decrease when the material has a poor porosity, which shows that the two factors should be finely tuned by the amount of nano‐CuS for ORR application. Of these materials, CuS(28 wt %)@Cu‐BTC exhibits the best activity, showing the onset potential of 0.91 V vs. RHE, quasi‐four‐electron transfer pathway, and a kinetic current density of 11.3 mA cm⁻² at 0.55 V vs. RHE.     

Copper–Organic Framework Fabricated with CuS Nanoparticles: Synthesis,Electrical Conductivity,and Electrocatalytic Activities for Oxygen Reduction Reaction

To apply electrically nonconductive metal–organic frameworks (MOFs) in an electrocatalytic oxygen reduction reaction (ORR), we have developed a new method for fabricating various amounts of CuS nanoparticles (nano‐CuS) in/on a 3D Cu–MOF, [Cu₃(BTC)₂?(H₂O)₃] (BTC=1,3,5‐benzenetricarboxylate). As the amount of nano‐CuS increases in the composite, the electrical conductivity increases exponentially by up to circa 10⁹‐fold, while porosity decreases, compared with that of the pristine Cu‐MOF. The composites, nano‐CuS(x wt %)@Cu‐BTC, exhibit significantly higher electrocatalytic ORR activities than Cu‐BTC or nano‐CuS in an alkaline solution. The onset potential, electron transfer number, and kinetic current density increase when the electrical conductivity of the material increases but decrease when the material has a poor porosity, which shows that the two factors should be finely tuned by the amount of nano‐CuS for ORR application. Of these materials, CuS(28 wt %)@Cu‐BTC exhibits the best activity, showing the onset potential of 0.91 V vs. RHE, quasi‐four‐electron transfer pathway, and a kinetic current density of 11.3 mA cm^?2 at 0.55 V vs. RHE.     

Lithium‐Functionalized Metal–Organic Frameworks that Show >10 wt % H2 Uptake at Ambient Temperature

We have used grand canonical Monte Carlo simulations with a first‐principles‐based force field to show that metal–organic frameworks (MOFs) with Li functional groups (i.e. C? Li bonds) allow for exceptional H₂ uptake at ambient temperature. For example, at 298 K and 100 bar, IRMOF‐1‐4Li shows a total H₂ uptake of 5.54 wt % and MOF‐200‐27Li exhibits a total H₂ uptake of 10.30 wt %, which are much higher than the corresponding values with pristine MOFs. Li‐functionalized MOF‐200 (MOF‐200‐27Li) shows 11.84 wt % H₂ binding at 243 K and 100 bar. These hydrogen‐storage capacities exceed the 2015 DOE target of 5.5 wt % H₂. Moreover, the incorporation of Li functional groups into MOFs provides more benefits, such as higher delivery amount, for H₂ uptake than previously reported Li‐doped MOFs.     

Bismuth(III) based Metal Organic Frameworks: Luminescence,Gas Adsorption,and Antibacterial Studies

Bi^III‐MOFs 1 – 4 were prepared via solvothermal method using four organic linkers; 2‐mercapto‐3‐methyl‐4‐thiazoleacetic acid (H₂MMTA), 2,6‐naphthalenedicarboxylic acid (2,6‐NDA), 4,6‐dihydroxy‐2‐mercaptopyrimidine (H₂DMP), and 4‐mercaptobenzoic acid (H₂MBA), respectively. The resulting MOFs were structurally/morphologically characterized by UV/Vis, AAS/ICP‐MS, Fourier transform infrared spectroscopy (FT‐IR), ¹H NMR, thermogravimetric analysis (TGA), scanning electron microscopy (SEM), and powder X‐ray diffraction technique. All these MOFs showed good luminescence properties exhibiting blue luminescence. N₂ gas adsorption isotherms of 1 – 4 confirmed the porosity of these frameworks. In order to evaluate the effect of metal ion upon chelation, the free organic linkers and respective MOFs were screened for their antibacterial potential against some pathogenic bacteria and appreciable activity was observed.     

A PCP Pincer Ligand for Coordination Polymers with Versatile Chemical Reactivity: Selective Activation of CO2 Gas over CO Gas in the Solid State

A tetra(carboxylated) PCP pincer ligand has been synthesized as a building block for porous coordination polymers (PCPs). The air‐ and moisture‐stable PCP metalloligands are rigid tetratopic linkers that are geometrically akin to ligands used in the synthesis of robust metal–organic frameworks (MOFs). Here, the design principle is demonstrated by cyclometalation with Pd^IICl and subsequent use of the metalloligand to prepare a crystalline 3D MOF by direct reaction with Co^II ions and structural resolution by single crystal X‐ray diffraction. The Pd?Cl groups inside the pores are accessible to post‐synthetic modifications that facilitate chemical reactions previously unobserved in MOFs: a Pd?CH₃ activated material undergoes rapid insertion of CO₂ gas to give Pd?OC(O)CH₃ at 1 atm and 298 K. However, since the material is highly selective for the adsorption of CO₂ over CO, a Pd?N₃ modified version resists CO insertion under the same conditions.     

Semiconductor/Covalent‐Organic‐Framework Z‐Scheme Heterojunctions for Artificial Photosynthesis

A strategy to covalently connect crystalline covalent organic frameworks (COFs) with semiconductors to create stable organic–inorganic Z‐scheme heterojunctions for artificial photosynthesis is presented. A series of COF–semiconductor Z‐scheme photocatalysts combining water‐oxidation semiconductors (TiO₂, Bi₂WO₆, and α‐Fe₂O₃) with CO₂ reduction COFs (COF‐316/318) was synthesized and exhibited high photocatalytic CO₂‐to‐CO conversion efficiencies (up to 69.67 μmol g^?1 h^?1), with H₂O as the electron donor in the gas–solid CO₂ reduction, without additional photosensitizers and sacrificial agents. This is the first report of covalently bonded COF/inorganic‐semiconductor systems utilizing the Z‐scheme applied for artificial photosynthesis. Experiments and calculations confirmed efficient semiconductor‐to‐COF electron transfer by covalent coupling, resulting in electron accumulation in the cyano/pyridine moieties of the COF for CO₂ reduction and holes in the semiconductor for H₂O oxidation, thus mimicking natural photosynthesis.     

Framework Cationization by Preemptive Coordination of Open Metal Sites for Anion‐Exchange Encapsulation of Nucleotides and Coenzymes

Cationic frameworks can selectively trap anions through ion exchange, and have applications in ion chromatography and drug delivery. However, cationic frameworks are much rarer than anionic or neutral ones. Herein, we propose a concept, preemptive coordination (PC), for targeting positively charged metal–organic frameworks (P‐MOFs). PC refers to proactive blocking of metal coordination sites to preclude their occupation by neutralizing ligands such as OH^?. We use 20 MOFs to show that this PC concept is an effective approach for developing P‐MOFs whose high stability, porosity, and anion‐exchange capability allow immobilization of anionic nucleotides and coenzymes, in addition to charge‐ and size‐selective capture or separation of organic dyes. The CO₂ and C₂H₂ uptake capacity of 117.9 cm³ g^?1 and 148.5 cm³ g^?1, respectively, at 273 K and 1 atm, is exceptionally high among cationic framework materials.     

Fast and Selective Semihydrogenation of Alkynes by Palladium Nanoparticles Sandwiched in Metal–Organic Frameworks

The semihydrogenation of alkynes into alkenes rather than alkanes is of great importance in the chemical industry. Unfortunately, state‐of‐the‐art heterogeneous catalysts hardly achieve high turnover frequencies (TOFs) simultaneously with almost full conversion, excellent selectivity, and good stability. Here, we used metal–organic frameworks (MOFs) containing Zr metal nodes (“UiO”) with tunable wettability and electron‐withdrawing ability as activity accelerators for the semihydrogenation of alkynes catalyzed by sandwiched palladium nanoparticles (Pd NPs). Impressively, the porous hydrophobic UiO support not only leads to an enrichment of phenylacetylene around the Pd NPs but also renders the Pd surfaces more electron‐deficient, which leads to a remarkable catalysis performance, including an exceptionally high TOF of 13835 h^?1, 100 % phenylacetylene conversion 93.1 % selectivity towards styrene, and no activity decay after successive catalytic cycles. The strategy of using molecularly tailored supports is universal for boosting the selective semihydrogenation of various terminal and internal alkynes.     

The Nitrogen‐Assisted Triphenylphosphine Displacement of 3‐Hydroxypyridine and 3‐Aminopyridine Ligands in Palladium(II) Complexes: Crystal Structures of [Pd(PPh3)Br]2{μ,η2‐C5H3N(OH)}2 and [Pd(PPh3)Br]2{μ,η2‐C5H3N(NH2)}2

Treatment of Pd(PPh₃₎₄ with 2‐bromo‐3‐hydroxypyridine [C₅H₃N(OH)Br] and 3‐amino‐2‐bromopyridine [C₅H₃N(NH₂)Br] in dichloromethane at ambient temperature cause the oxidative addition reaction to produce the palladium complex [Pd(PPh₃₎₂{η¹‐C₅H₃N(OH)}(Br)], 2 and [Pd(PPh₃₎₂{η¹‐C₅H₃N(NH₂)}(Br)], 3 , by substituting two triphenylphosphine ligands, respectively. In dichloromethane solution of complexes 2 and 3 at ambient temperature for 3 days, it undergo displacement of the triphenylphosphine ligand to form the dipalladium complexes [Pd(PPh₃)Br]₂{μ,η²‐C₅H₃N(OH)}₂, 4 and [Pd(PPh₃)Br]₂{μ,η²‐C₅H₃N(NH₂)}₂, 5 , in which the two 3‐hydroxypyridine and 3‐aminopyridine ligands coordinated through carbon to one metal center and bridging the other metal through nitrogen atom, respectively. Complexes 4 and 5 are characterized by X‐ray diffraction analyses.     

Nonlinear Optical Switching in Regioregular Porphyrin Covalent Organic Frameworks

Covalent organic frameworks (COFs) have garnered immense scientific interest among porous materials because of their structural tunability and diverse properties. However, the response of such materials toward laser‐induced nonlinear optical (NLO) applications is hardly understood and demands prompt attention. Three novel regioregular porphyrin (Por)‐based porous COFs—Por‐COF‐HH and its dual metalated congeners Por‐COF‐ZnCu and Por‐COF‐ZnNi—have been prepared and present excellent NLO properties. Notably, intensity‐dependent NLO switching behavior was observed for these Por‐COFs, which is highly desirable for optical switching and optical limiting devices. Moreover, the efficient π‐conjugation and charge‐transfer transition in ZnCu‐Por‐COF enabled a high nonlinear absorption coefficient (β=4470 cm/GW) and figure of merit (FOM=σ₁/σ_o, 3565) value compared to other state‐of‐the‐art materials, including molecular porphyrins (β≈100–400 cm/GW), metal–organic frameworks (MOFs; β≈0.3–0.5 cm/GW), and graphene (β=900 cm/GW).     

A Methylthio‐Functionalized‐MOF Photocatalyst with High Performance for Visible‐Light‐Driven H2 Evolution

Recently, the emergence of photoactive metal–organic frameworks (MOFs) has given great prospects for their applications as photocatalytic materials in visible‐light‐driven hydrogen evolution. Herein, a highly photoactive visible‐light‐driven material for H₂ evolution was prepared by introducing methylthio terephthalate into a MOF lattice via solvent‐assisted ligand‐exchange method. Accordingly, a first methylthio‐functionalized porous MOF decorated with Pt co‐catalyst for efficient photocatalytic H₂ evolution was achieved, which exhibited a high quantum yield (8.90 %) at 420 nm by use sacrificial triethanolamine. This hybrid material exhibited perfect H₂ production rate as high as 3814.0 μmol g^?1 h^?1, which even is one order of magnitude higher than that of the state‐of‐the‐art Pt/MOF photocatalyst derived from aminoterephthalate.     

Nanosized Functional MOFs Loading Ag/AgBr with Throughout‐Visible‐Light Absorption for High‐Efficiency Photocatalysis

Porous metal‐organic frameworks (MOFs) loading metal nanoparticles to form a composite photocatalyst demonstrated unique advantages. Modification of the electron donating group on the aromatic linkers of MOFs could increase the absorption range of light, thereby increasing the photocatalytic activity. In this study, we prepared a composite photocatalyst using a stable NH₂‐functionalized MOF (UiO‐66‐NH₂) to load semiconductor Ag/AgBr nanoparticles, and the resultant composites have intense optical absorption throughout visible light range. The greatly enhanced optical absorption and the unique hetero‐junction between Ag/AgBr and UiO‐66‐NH₂ render efficient separation and utilization of photogenerated electron‐hole pairs. Therefore, Ag/AgBr@UiO‐66‐NH₂ showed much more excellent photocatalytic activity, compared with unmodified UiO‐66 loading Ag/AgBr (Ag/AgBr@UiO‐66) and reported AgX@MOF catalysts. Moreover, the composite photocatalysts showed excellent stability during cycling experiment.     

Intrinsic White‐Light‐Emitting Metal–Organic Frameworks with Structurally Deformable Secondary Building Units

The secondary building units in metal–organic frameworks (MOFs) are commonly well‐defined metal–oxo clusters or chains with very limited structural strain. Herein, the structurally deformable haloplumbate units that are often observed in organolead halide perovskites have been successfully incorporated into MOFs. The resultant materials are a rare class of isoreticular MOFs exhibiting large Stokes‐shifted broadband white‐light emission, which is probably induced by self‐trapped excitons from electron–phonon coupling in the deformable, zigzag [Pb₂X₃]⁺ (X=Cl, Br, or I) chains. In contrast, MOFs with highly symmetric, robust haloplumbate chains only exhibit narrow UV–blue photoemission. The designed MOF‐based intrinsic white‐light photoemitters have a number of advantages over hybrid inorganic–organic perovskites in terms of stability and tunability, including moisture resistance, facile functionalization of photoactive moieties onto the organic linkers, introduction of luminescent guests.     

Metal–Organic Framework (MOF) Compounds: Photocatalysts for Redox Reactions and Solar Fuel Production

Metal–organic frameworks (MOFs) are crystalline porous materials formed from bi‐ or multipodal organic linkers and transition‐metal nodes. Some MOFs have high structural stability, combined with large flexibility in design and post‐synthetic modification. MOFs can be photoresponsive through light absorption by the organic linker or the metal oxide nodes. Photoexcitation of the light absorbing units in MOFs often generates a ligand‐to‐metal charge‐separation state that can result in photocatalytic activity. In this Review we discuss the advantages and uniqueness that MOFs offer in photocatalysis. We present the best practices to determine photocatalytic activity in MOFs and for the deposition of co‐catalysts. In particular we give examples showing the photocatalytic activity of MOFs in H₂ evolution, CO₂ reduction, photooxygenation, and photoreduction.     

A lithium‐organic framework as a fluorescent sensor for detecting aluminum (III) ion

Due to the low coordination number and the relatively weak coordination ability, it is a great challenge to introduce Li⁺ into the construction of metal–organic frameworks (MOFs). Here, one Li‐based metal–organic framework (Li‐MOF), [Li₄L(DMF)₂]_n ( HNU‐31 ), is constructed by the assembly of LiNO₃ and 5‐(bis(4‐carboxybenzyl)amino)isophthalic acid (H₄L) ligand, which possesses a 3D framework, and can be serve as a luminescent sensor for detecting Al³⁺ ion with the detection limit of 4 × 10^?6 M.     

High H2 uptake in Li-, Na-, K-metalated covalent organic frameworks and metal organic frameworks at 298 K

The Yaghi laboratory has developed porous covalent organic frameworks (COFs), COF102, COF103, and COF202, and metal-organic frameworks (MOFs), MOF177, MOF180, MOF200, MOF205, and MOF210, with ultrahigh porosity and outstanding H(2) storage properties at 77 K. Using grand canonical Monte Carlo (GCMC) simulations with our recently developed first principles based force field (FF) from accurate quantum mechanics (QM), we calculated the molecular hydrogen (H(2)) uptake at 298 K for these systems, including the uptake for Li-, Na-, and K-metalated systems. We report the total, delivery and excess amount in gravimetric and volumetric units for all these compounds. For the gravimetric delivery amount from 1 to 100 bar, we find that eleven of these compounds reach the 2010 DOE target of 4.5 wt % at 298 K. The best of these compounds are MOF200-Li (6.34) and MOF200-Na (5.94), both reaching the 2015 DOE target of 5.5 wt % at 298 K. Among the undoped systems, we find that MOF200 gives a delivery amount as high as 3.24 wt % while MOF210 gives 2.90 wt % both from 1 to 100 bar and 298 K. However, none of these compounds reach the volumetric 2010 DOE target of 28 g H(2)/L. The best volumetric performance is for COF102-Na (24.9), COF102-Li (23.8), COF103-Na (22.8), and COF103-Li (21.7), all using delivery g H(2)/L units for 1-100 bar. These are the highest volumetric molecular hydrogen uptakes for a porous material under these thermodynamic conditions. Thus, one can obtain outstanding H(2) uptakes with Li, Na, and K doping of simple frameworks constructed from simple, cheap organic linkers. We present suggestions for strategies for synthesis of alkali metal-doped MOFs or COFs.     

Hot π‐Electron Tunneling of Metal–Insulator–COF Nanostructures for Efficient Hydrogen Production

A metal–insulator–semiconductor (MIS) photosystem based on covalent organic framework (COF) semiconductors was designed for robust and efficient hydrogen evolution under visible‐light irradiation. A maximal H₂ evolution rate of 8.42 mmol h^?1 g^?1 and a turnover frequency of 789.5 h^?1 were achieved by using a MIS photosystem prepared by electrostatic self‐assembly of polyvinylpyrrolidone (PVP) insulator‐capped Pt nanoparticles (NPs) with the hydrophilic imine‐linked TP‐COFs having =C=O?H?N= hydrogen‐bonding groups. The hot π‐electrons in the photoexcited n‐type TP‐COF semiconductors can be efficiently extracted and tunneled to Pt NPs across an ultrathin PVP insulating layer to reduce protons to H₂. Compared to the Schottky‐type counterparts, the COF‐based MIS photosystems give a 32‐fold‐enhanced carrier efficiency, attributed to the combined enhancement of photoexcitation rate, charge separation, and oxidation rate of holes accumulated in the valence band of the TP‐COF semiconductor.     

Organization and Energy Transfer of Fused Aromatic Hydrocarbon Guests within Anion‐Confining Nanochannel MOFs

The self‐assembly of Zn^II ions with 1,3,5‐tris(isonicotinoyloxyethyl)cyanurate produces new topological (4²?12⁴)₃(4³)₄ 2D metal–organic frameworks (MOFs) with anion‐confining cages. The eclipsed assembly of each 2D MOF by π–π stacking of cyanurate moieties (3.352(5) Å) forms 3D MOFs consisting of nanochannels (10.5 Å). Two of the three anions are confined in each peanut‐type cage, resulting in hydrophobicity of the nanochannels. The hydrophobic nanochannel effectively adsorbs a wide range of fused aromatic hydrocarbons (FAHs) as monomers or dimers, rendering it potentially highly useful as an energy‐transfer material.