Synthesis, Characterisation and Electrical Properties of Supramolecular DNA-Templated Polymer Nanowires of 2,5-(Bis-2-thienyl)-pyrrole

Supramolecular polymer nanowires have been prepared by using DNA-templating of 2,5-(bis-2-thienyl)-pyrrole (TPT) by oxidation with FeCl(3) in a mixed aqueous/organic solvent system. Despite the reduced capacity for strong hydrogen bonding in polyTPT compared to other systems, such as polypyrrole, the templating proceeds well. FTIR spectroscopic studies confirm that the resulting material is not a simple mixture and that the two types of polymer interact. This is indicated by shifts in bands associated with both the phosphodiester backbone and the nucleobases. XPS studies further confirm the presence of DNA and TPT, as well as dopant Cl(-) ions. Molecular dynamics simulations on a [{dA(24) :dT(24) }/{TPT}(4) ] model support these findings and indicate a non-coplanar conformation for oligoTPT over much of the trajectory. AFM studies show that the resulting nanowires typically lie in the 7-8?nm diameter range and exhibit a smooth, continuous, morphology. Studies on the electrical properties of the prepared nanowires by using a combination of scanned conductance microscopy, conductive AFM and variable temperature two-terminal I-V measurements show, that in contrast to similar DNA/polymer systems, the conductivity is markedly reduced compared to bulk material. The temperature dependence of the conductivity shows a simple Arrhenius behaviour consistent with the hopping models developed for redox polymers.     

Synthesis and electrical conductivity of some poly[4‐amino‐2,6‐pyrimidinodi‐thiocarbamate]–metal complexes

Poly[4‐amino‐2,6‐pyrimidinodithiocarbamate] was prepared from the reaction of 2‐mercapto‐4,6‐diaminopyrimidine with carbon disulfide, followed by condensation through the removal of H₂S gas. Five polymer–metal complexes of manganese, ferrous, ferric, zinc and mercury were then prepared. The polymer–metal complexes are investigated by elemental analyses, ultraviolet Fourier transform infrared and magnetic susceptibility. The DC electrical conductivity variation with the temperature in the region 298–498 K of the five polymer–metal complexes was determined. Doping with 5% ZnCl₂ increased the electrical conductivity of the polymer at all temperatures investigated. All the polymer–metal complexes showed an increase in conductivity with an increase in temperature, which is a typical semiconductor behavior. The proposed structure of the complexes is (MLX₂·mH₂O)_n. All the polymer–metal complexes are thermally stable, are insoluble in common organic solvents and have high melting points. Copyright © 1999 John Wiley & Sons, Ltd.     

Alternating π‐conjugated copolymer of dithiafulvene with 2,2′‐bipyridyl units

A π‐conjugated polymer containing a dithiafulvene unit and a bipyridyl unit was prepared by cycloaddition polymerization of aldothioketene derived from 5,5′‐diethynyl‐2,2′‐bipyridine. Ultraviolet–visible (UV–vis) absorption spectra showed that the π‐conjugation system of the polymer expanded more effectively than that of a benzene analogue of poly(dithiafulvene) obtained from 1,4‐diethynylbenzene. Cyclic voltammetry measurements indicated that the dithiafulvene–bipyridyl polymer was a weaker electron‐donor polymer than the benzene analogue. These results supported the idea that the incorporation of the electron‐accepting bipyridyl moiety into conjugated poly(dithiafulvene) induced an intramolecular charge‐transfer (CT) effect between the units. Treatment of the dithiafulvene–bipyridyl polymer with bis(2,2′‐bipyridyl)dichlororuthenium (II) [Ru(bpy)₂Cl₂] afforded a ruthenium–polymer complex. A cyclic voltammogram of the complex showed broad redox peaks, which indicated electronic interaction between the dithiafulvene and tris(bipyridyl) ruthenium complex. The dithiafulvene–bipyridyl polymer formed CT complexes with 7,7,8,8‐tetracycanoquinodimethane (TCNQ) in dimethyl sulfoxide. The UV–vis absorption indicated that the resulting CT complex contained anion radical of TCNQ and partially charge‐transferred TCNQ. The polymer showed an unusually high electrical conductivity of 3.1 × 10^?4 S/cm in its nondoped state due to the effective donor–acceptor interaction between the bipyridine unit and the dithiafulvene unit. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 4083–4090, 2001     

Two‐dimensional π‐conjugated metal‐organic framework with high electrical conductivity for electrochemical sensing

A two‐dimensional π‐conjugated metal‐organic framework (MOF) with long‐range delocalized electrons has been prepared and applied as modified electrode material without further post‐modification. The MOF (Cu₃(HHTP)₂) is composed of Cu(II) centers and a redox‐active linker (2,3,6,7,10,11‐hexahydroxytriphenylene, HHTP). Compared to most MOFs, Cu₃(HHTP)₂ displays higher electrical conductivity and charge storage capacity owing to the collective effect of metal ions and aromatic ligands with π–π conjugation. In order to confirm the superior properties of this material, the electrochemical detection of dopamine (DA) was conducted and the satisfactory results were obtained. The currents increase linearly with the concentration of DA in the range 5.0 × 10^?8 to 2.0 × 10^?4 M with a detection limit of 5.1 nM. Furthermore, Cu₃(HHTP)₂ presents high selectivity and applicability in serum samples for electrochemical DA sensing. Overall, this material has excellent potential as a promising platform for establishing an MOF‐based electrochemical sensor.     

Synthesis and application as polymer electrolyte of hyperbranched polyether made by cationic ring‐opening polymerization of 3‐{2‐[2‐(2‐hydroxyethoxy)ethoxy]ethoxymethyl}‐3′‐methyl‐oxetane

A novel cyclic ether monomer 3‐{2‐[2‐(2‐hydroxyethoxy)ethoxy]ethoxy‐methyl}‐3′‐methyloxetane (HEMO) was prepared from the reaction of 3‐hydroxymethyl‐3′‐methyloxetane tosylate with triethylene glycol. The corresponding hyperbranched polyether (PHEMO) was synthesized using BF₃·Et₂O as initiator through cationic ring‐opening polymerization. The evidence from ¹H and ¹³C NMR analyses revealed that the hyperbranched structure is constructed by the competition between two chain propagation mechanisms, i.e. active chain end and activated monomer mechanism. The terminal structure of PHEMO with a cyclic fragment was definitely detected by MALDI‐TOF measurement. A DSC test implied that the resulting polyether has excellent segment motion performance potentially beneficial for the ion transport of polymer electrolytes. Moreover, a TGA assay showed that this hyperbranched polymer possesses high thermostability as compared to its liquid counterpart. The ion conductivity was measured to reach 5.6 × 10^?5 S/cm at room temperature and 6.3 × 10^?4 S/cm at 80 °C after doped with LiTFSI at a ratio of Li:O = 0.05, presenting the promise to meet the practical requirement of lithium ion batteries for polymer electrolytes. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3650–3665, 2006     

Nanowires Formed by the Co‐Assembly of a Negatively Charged Low‐Molecular Weight Gelator and a Zwitterionic Polythiophene

Conjugated organic nanowires have been prepared by co‐assembling a carboxylate containing low‐molecular weight gelator (LMWG) and an amino acid substituted polythiophene derivative (PTT). Upon introducing the zwitterionic polyelectrolyte PTT to a basic molecular solution of the organogelator, the negative charges on the LMWG are compensated by the positive charges of the PTT. As a result, nanowires form through co‐assembly. These nanowires are visualized by both transmission electron microscopy (TEM) and atomic force microscopy (AFM). Depending on the concentration and ratio of the components these nanowires can be micrometers long. These measurements further suggest that the aggregates adopt a helical conformation. The morphology of these nanowires are studied with fluorescent confocal laser scanning microscopy (CLSM). The interactions between LMWG and PTT are characterized by steady‐state and time‐resolved fluorescence spectroscopy studies. The steady‐state spectra indicate that the backbone of the PTT adopts a more planar and more aggregated conformation when interacting with LMWG. The time‐ resolved fluorescence decay studies confirm this interpretation.     

Preparation of syndiotactic poly(4‐tert‐butyldimethyl‐silyloxystyrene) and poly(4‐hydroxystyrene)

Syndiospecific silyloxy‐functionalized polystyrene with high molecular weight was prepared using a (pentamethylcyclopentadienyl)titanatrane/MMAO catalyst system. The resulting polymer is soluble in polar organic solvents such as THF and shows good thermal stability. In addition, the compound Ni(acac)₂ was used as a catalyst in preparing authentic atactic polymer of 4‐tert‐butyldimethylsilyloxystyrene under the same conditions. The chemical transformation of syndiospecific poly(4‐tert‐butyldimethylsilyloxystyrene) also gave a new polar polymer, namely syndiotactic poly(4‐hydroxystyrene) which is unattainable by traditional synthetic methods.     

Composites of poly(ε‐caprolactone) and Mo6S3I6 Nanowires

Composites of poly(ε‐caprolactone) (PCL) and molybdenum sulfur iodine (MoSI) nanowires were prepared using twin‐screw extrusion. Extensive microscopic examination of the composites revealed the nanowires were well dispersed in the PCL matrix, although bundles of Mo₆S₃I₆ ropes were evident at higher loadings. Secondary electron imaging (SEI) showed the nanowires had formed an extensive network throughout the PCL matrix, resulting in increased electrical conductivity of PCL, by eight orders of magnitude, and an electrical percolation threshold of 6.5 × 10^?3 vol%. Thermal analysis (DSC), WAXD, and hot stage polarized optical microscopy (HSPOM) experiments revealed Mo₆S₃I₆ addition altered PCL crystallization kinetics, nucleation density, and crystalline content. A greater number of smaller spherulites were formed via heterogeneous nucleation. The onset of thermal decomposition (TGA) of PCL decreased by 70°C, a consequence of the thermal degradation of Mo₆S₃I₆ to MoO₃, which in turn accelerates the formation of volatile gases during the first stage of PCL decomposition. Copyright © 2010 John Wiley & Sons, Ltd.     

The preparation of 3,6‐bis(3‐hexylthien‐2‐yl)‐s‐tetrazine and its conjugated polymers

We demonstrated, for the first time, that 3,6‐bis(3‐hexylthien‐2‐yl)‐s‐tetrazine (TTz) with hexyl group at the 3‐position of thiophene rings can be prepared using a modified sulfur‐assisted Pinner synthesis. Although the hexyl group creates large steric hindrance to the tetrazine ring formation reaction, and the reaction under a traditional condition only produces trace amount of the target product, the yield of this reaction under a modified reaction condition using anhydrous hydrazine at 68 °C can reach 65%. Two new copolymers of the resulting TTz and hexyl‐ or 2‐ethylhexyl‐substituted cyclepentadithiophene have been prepared. The polymers show a broader light absorption in film than in solution attributing to the large distribution of effective conjugation length of polymer chain due to the existence of both cis‐ and trans‐orientations of the 3‐hexylthiophene units in the planar polymer chain in solid state. Although the polymers show a narrow band gap and a deep HOMO level, which are desirable for generating an efficient light absorption and a larger open circuit voltage (V_oc) of the resulting solar cell devices, the device performance is not as good as expected. It is attributed to the random distribution of the cis‐ and trans‐conformations along the polymer chain. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011.     

Synthesis of Morphology Processable α‐AlPO4 Nanoparticles,Nanowires, and Multi‐strand Nano‐ropes

In this paper we present aluminum phosphate nanocrystals, prepared by a hydrothermal reaction, using amphiphilic triblock copolymer F127 [(EO)₁₀₆(PO)₇₀(EO)₁₀₆] as a morphology‐directing template. By verifying the pH from 10 to 12, the morphology progression of AlPO₄ nanocrystals from nanoparticles to nanoparticle‐aggregated nanowires, and finally to multi‐strand nano‐ropes, was successfully demonstrated. The most influential factors in the morphology process were the initial pH level, the participation of surfactant‐template F127, and the change in pH during the reaction. We proposed a pH‐dependent model to illustrate both the growth of AlPO₄ nanocrystals inside F127 amphiphilic domains and the chemical driving force that aggregated the nanoparticles into chain‐shaped nanowires. The incorporation of water molecules as H‐bonding linkers, to combine single nanowires into multi‐strand nano‐ropes, is also discussed in this model. Powder X‐ray diffraction (XRD) patterns of the nanoparticle‐aggregated nanowires and multi‐strand nano‐ropes were consistent with a mixed phase of berlinite and cristobalite structures, corresponding to the low‐temperature form (a‐form), while the AlPO₄ nanoparticles showed a pure berlinite phase only.     

A facile “graft from” method to prepare molecular‐level dispersed graphene–polymer composites

Graphene–polymer composites of positive‐charged poly(dimethyl aminoethyl acrylate), negative‐charged poly(acrylic acid), and neutral polystyrene were prepared by “graft from” methodology using reversible addition fragmentation chain transfer (RAFT) polymerization via a pyrene functional RAFT agent (PFRA) modified graphene precursor. Fluorescence spectroscopy and attenuated total reflection infrared (ATR‐IR) evidenced that the PFRA was attached on the graphene basal planes by π–π stacking interactions, which is strong enough to anti‐dissociation in the polymerization mixture up to 80°C. Atomic force microscopy (AFM) revealed that the thickness of a graphene–polymer sheet was about 4.0 nm. Graphene composites of different polymers with the same polymerization degree exhibited similar conductivity; however, when the polymer chain was designed as random copolymer the conductivity was significantly decreased. It was also observed that the longer the grafted polymer chains the lower the conductivity. ATR‐IR spectroscopy and thermogravimetric analysis were also performed to characterize the as‐prepared composites. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Gelation of a Highly Fluorescent Urea‐Containing Triarylmelamine Derivative: 2,4,6‐Tris(p‐N′‐Octadecylureido‐Anilino)Triazine in Organic Solvents

A new gelator of urea‐containing triazine derivatives was synthesized and tested in order to explore the gelation potential in different organic solvents. This compound has been found to form organogels with a variety of organic solvents such as decalin and other solvents. The resulting thermo‐reversible gel was characterized by using the dropping ball method and a number of other instruments. The melting temperature of the gel increased with the gel concentration. The intermolecular hydrogen bonding of gelation was demonstrated through an FT‐IR spectrometer. UV‐Vis and fluorescence analysis showed that the gel displayed various optical effects in different organic solvents. The blue fluorescence of the gel in decalin and the quenched effect of gel in CHCl³ were displayed, respectively. Morphological features in decalin and CHCl₃ were studied by applying atomic force microscopy (AFM), and the morphological features demonstrated that there were different aggregations in different solvents. In conductivity electrolyte experiments, the organogel electrolytes indicated high conductivity (σ) comparable to the corresponding NaClO₄/THF solution. The conductivity of gel electrolytes was increased with electrolyte salt.     

Graft‐crosslinked Copolymers Based on Poly(arylene ether ketone)‐gc‐sulfonated Poly(arylene ether sulfone) for PEMFC Applications

Novel poly(arylene ether ketone) polymers with fluorophenyl pendants and phenoxide‐terminated wholly sulfonated poly(arylene ether sulfone) oligomers are prepared via Ni(0)‐catalyzed and nucleophilic polymerization, respectively, and subsequently used as starting materials to obtain graft‐crosslinked membranes as polymer electrolyte membranes. The phenoxide‐terminated sulfonated moieties are introduced as hydrophilic parts as well as crosslinking units. The chemical structure and morphology of the obtained membranes are confirmed by ¹H NMR and tapping‐mode AFM. The properties required for fuel cell applications, including water uptake and dimensional change, as well as proton conductivity, are investigated. AFM results show a clear nanoscale phase‐separation microstructure of the obtained membranes. The membranes show good dimensional stability and reasonably high proton conductivities under 30–90% relative humidity. The anisotropic proton conductivity ratios (σ_⟂/||) of the membranes in water are in the range 0.65–0.92, and increase with an increase in hydrophilic block length. The results indicate that the graft‐crosslinked membranes are promising candidates for applications as polymer electrolyte membranes.

     

MnO@Carbon Core–Shell Nanowires as Stable High‐Performance Anodes for Lithium‐Ion Batteries

A facile method is presented for the large‐scale preparation of rationally designed mesocrystalline MnO@carbon core–shell nanowires with a jointed appearance. The nanostructures have a unique arrangement of internally encapsulated highly oriented and interconnected MnO nanorods and graphitized carbon layers forming an external coating. Based on a comparison and analysis of the crystal structures of MnOOH, Mn₂O₃, and MnO@C, we propose a sequential topotactic transformation of the corresponding precursors to the products. Very interestingly, the individual mesoporous single‐crystalline MnO nanorods are strongly interconnected and maintain the same crystallographic orientation, which is a typical feature of mesocrystals. When tested for their applicability to Li‐ion batteries (LIB), the MnO@carbon core–shell nanowires showed excellent capacity retention, superior cycling performance, and high rate capability. Specifically, the MnO@carbon core–shell nanostructures could deliver reversible capacities as high as 801 mA h g^?1 at a high current density of 500 mA g^?1, with excellent electrochemical stability after testing over 200 cycles, indicating their potential application in LIBs. The remarkable electrochemical performance can mainly be attributed to the highly uniform carbon layer around the MnO nanowires, which is not only effective in buffering the structural strain and volume variations of anodes during repeated electrochemical reactions, but also greatly enhances the conductivity of the electrode material. Our results confirm the feasibility of using these rationally designed composite materials for practical applications. The present strategy is simple but very effective, and appears to be sufficiently versatile to be extended to other high‐capacity electrode materials with large volume variations and low electrical conductivities.     

Graphene Nanoribbons from Tetraphenylethene‐Based Polymeric Precursor: Chemical Synthesis and Application in Thin‐Film Field‐Effect Transistor

Graphene nanoribbons (GNRs) with a non‐zero bandgap are regarded as a promising candidate for the fabrication of electronic devices. In this study, large‐scale solution synthesis of narrow GNRs was firstly achieved by the intramolecular cyclodehydrogenation of kinked tetraphenylethene (TPE) polymer precursors prepared by A₂B₂‐type Suzuki‐Miyaura polymerization. After the cyclization reaction, the nanoribbons have a better conjugation than the twisted polymer precursor, resulting in obvious red shift in UV/vis absorption and photoluminescence (PL) spectra. The efficient formation of conjugated nanoribbons was also investigated by Raman, FTIR spectroscopy, and microscopic studies. Furthermore, such structurally well‐defined GNRs have been successfully developed for top‐gated field‐effect transistor (FET) by directly solution processing. The AFM images show that the prepared‐GNRs thin films form crystalline fibrillar intercalating networks, which can effectively facilitate the charge transport. These FET devices with ion‐gel gate dielectrics exhibit low‐voltage operation (<5 V) with excellent mobility up to 0.41 cm²·V^?1·s^?1 and an on‐off ratio of 3×10⁴, thus opening up new opportunities for flexible GNRs‐based electronic devices.     

Synthesis of a soluble conjugated cumulene polymer: poly(biphenyl‐4,4′‐diyl‐1,4‐bis(4‐dodecyloxyphenyl)‐buta‐1,2,3‐triene‐1,4‐diyl)

A conjugated polymer with a butatriene segment in the main chain, poly(biphenyl‐4,4′‐diyl‐1,4‐bis(4‐dodecyloxyphenyl)buta‐1,2,3‐triene‐1,4‐diyl), was synthesized from 1,4‐bis(4‐bromophenyl)‐1,4‐bis(4‐dodecyloxyphenyl)buta‐1,2,3‐triene by dehalogenative polycondensation using Ni(cod)₂. The polymer was well soluble in usual organic solvents such as CHCl₃ and THF. Structural analyses and characterizations were carried out by IR, NMR, UV‐Vis, PL, and Raman spectroscopy, as well as electrical conductivity. It is suggested that π‐conjugation is extended to some degree through biphenylylene and butatrienylene linkages.     

Ultrathin Ca‐PO4‐CO3 Solid‐Solution Nanowires: A Controllable Synthesis and Full‐Color Emission by Rare‐Earth Doping

It was found that calcium carbonate (CaCO₃) and hydroxyapatite (Ca₁₀(OH)₂(PO₄)₆), which are two crucial constituents of the most abundant minerals in nature and very important bioinorganic components in the tissues of mineralizing organisms, can form solid solutions in a wide range of PO₄^3?/CO₃^2? (P/C) ratios at low temperature when prepared as ultrathin nanowire structures. This is due to the special reactivity of ultrasmall nanocrystals, which can effectively lower the synthetic temperature and promote the formation of solid solutions. The as‐prepared ultrathin nanowires with suitable P/C ratios presented strong blue luminescence due to the existence of abundant defects strengthened by CO₃^2?. If used as the matrix, the as‐prepared ultrathin nanowires demonstrated bright green or red luminescent properties when doped with Tb³⁺ or Eu³⁺ ions, and simultaneously retained their original morphologies. These three kinds of fluorescent nanowires could reproduce a full range of luminescence colors based on additive color mixtures of the three primary colors (red, green, and blue). In addition, under the same reaction system, ultrafine rare‐earth‐doped (Ce³⁺, Tb³⁺, Eu³⁺) nanowires (about 1 nm in diameter) were synthesized by using a one‐step hydrothermal process, which further pushed the size of the Ca‐PO₄‐CO₃ nanobuilding blocks to one unit cell region. These ultrafine nanowires displayed excellent film‐forming properties and the ability to absorb UV radiation.     

Tripyridine‐Derivative‐Derived Semiconducting Iodo‐Argentate/Cuprate Hybrids with Excellent Visible‐Light‐Induced Photocatalytic Performance

Through regulating the pH values, a series of iodo‐argentate/cuprate hybrids, [Me₃(4‐TPT)]₄[Ag₆I₁₈] ( 1 , Me₃(4‐TPT)=N,N′,N′′‐trimethyl‐2,4,6‐tris(4‐pyridyl)‐1,3,5‐triazine), [Me₃(4‐TPT)][M₅I₈] (M=Ag/ 2 , Cu/ 2 a ), [Me₃(3‐TPT)][M₅I₈] (Me₃(3‐TPT)=N,N′,N′′‐trimethyl‐2,4,6‐tris(3‐pyridyl)‐1,3,5‐triazine, M=Ag/ 3 , Cu/ 4 ), which exhibit adjustable structural variations with different dimensional structures, have been obtained under solvothermal conditions. They are directed by two types of in situ N‐alkylation TPT‐derivatives (Me₃(4‐TPT) for 1 / 2 / 2 a and Me₃(3‐TPT) for 3 / 4 ) and represent the isolated units ( 1 ), 1D polymeric chain ( 4 ), 2D layered structures ( 2 / 2 a , 3 ) based on diverse metal iodide clusters. These compounds possess reducing band gaps as compared with the bulk β‐AgI and CuI and belong to potential semiconductor materials. Iodocuprates feature highly efficient photocatalytic activity in the sunlight‐induced degradation of organic dyes. The detailed study on the possible photocatalytic mechanism, including radical trapping tests and theoretical calculations, reveals that the N‐alkylation TPT moieties contribute to the narrow semiconducting behavior and effectively inhibit the recombination of photogenerated electron‐hole pairs, which result in an excellent visible‐light‐induced photocatalytic performance.     

Oligonucleotide Analogues with a Nucleobase‐Including Backbone,Part 5, 2′‐Deoxy‐8‐(hydroxymethyl)adenosine‐ and 2′‐Deoxy‐6‐(hydroxymethyl)uridine‐Derived Phosphoramidites: Synthesis and Incorporation into 14‐Mer DNA Strands

The pairing propensity of new DNA analogues with a phosphinato group between O−C(3′) and a newly introduced OCH₂ group at C(8) and C(6) of 2′‐deoxyadenosine and 2′‐deoxyuridine, respectively, was evaluated by force‐field calculations and Maruzen model studies. These studies suggest that these analogues may form autonomous pairing systems, and that the incorporation of single modified units into DNA 14mers is compatible with duplex formation. To evaluate the incorporation, we prepared the required phosphoramidites 3 and 4 from 2′‐deoxyadenosine and 2′‐deoxyuridine, respectively. The phosphoramidite 5 was similarly prepared to estimate the influence of a CH₂OH group at C(8) on the duplex stability. The modified 14‐mers 6 – 9 were prepared by solid‐phase synthesis. Pairing studies show a decrease of the melting temperature by 2.5° for the duplex 13 ⋅ 9 , and of 6 – 8° for the duplexes 10 ⋅ 6 , 11 ⋅ 6 , 13 ⋅ 7 , and 14 ⋅ 8 , as compared to the unmodified duplexes.     

Regio‐ and stereoselective cyclopolymerization of 1,2 : 4,5‐dianhydro‐3‐O‐methyl‐xylitol leading to a novel polycarbohydrate of (2→5)‐1,4‐anhydro‐3‐O‐methyl‐pentitol

(2→5)‐1,4‐Anhydro‐3‐O‐methyl‐pentitol, which is a novel carbohydrate polymer without an anomeric linkage, was synthesized by cationic cyclopolymerization of 1,2 : 4,5‐dianhydro‐3‐O‐methyl‐xylitol. When BF₃·OEt₂ was used as the initiator, soluble polymers were obtained in 28 to 50% yield. These polymers have number‐average molecular weights of 1 150 to 2 340 corresponding to an average degree of polymerization of 8.8 to 18.0. It was confirmed by ¹³C NMR that the resulting polymer mainly consists of 1,4‐anhydro‐3‐O‐methyl‐D L ‐arabinitol units.