Sterically hindered 1,3-diketones in the Michael reaction

The base catalyzed addition of sterically hindered 1,3-diketones to the activated multiple bond of ethyl acrylate and 4-methyl-4-methoxy-1-phenylpent-2-yne-1-one has been studied. The addition of methyl(2-propenyl)ketone is partially accompanied by intramolecular cyclization of the resulting adduct.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 1, pp. 147–149, January, 1996.     

Separation of Photoactive Conformers Based on Hindered Diarylethenes: Efficient Modulation in Photocyclization Quantum Yields

Endowing both solvent independency and excellent thermal bistability, the benzobis(thiadiazole)‐bridged diarylethene system provides an efficient approach to realize extremely high photocyclization quantum yields (Φ_o‐c, up to 90.6 %) by both separating completely pure anti‐parallel conformer and suppressing intramolecular charge transfer (ICT).     

Non-Planar Structures of Sterically Overcrowded Trialkylamines

Several amines with three bulky alkyl groups at the nitrogen atom, which exceed the steric crowding of triisopropylamine significantly, were synthesized, mainly by treating N-chlorodialkylamines with Grignard reagents. In six cases, namely tert-butyldiisopropylamine, 1-adamantyl-tert-butylisopropylamine, di-1-adamantylamines with an additional N-cyclohexyl or N-exo-2-norbonyl substituent, as well as 2,2,6,6-tetramethylpiperidine derivatives with N-cyclohexyl or N-neopentyl groups, appropriate single crystals were generated that enabled X-ray diffraction studies and analysis of the molecular structures. The four noncyclic amines adopt triskele-like conformations, and the sum of the three C−N−C angles is always in the range of 351.1° to 352.4°. Consequently, these amines proved to be structurally significantly flatter than trialkylamines without steric congestion, which is also signalized by the smaller heights of the NC₃ pyramids (0.241–0.259 Å). There is no clear correlation between the heights of these pyramids and the degree of the steric crowding in the new amines, presumably because steric repulsion is partly compensated by dispersion interaction. In the cases of the two heterocyclic amines, the steric stress is smaller, and the molecular structures include quite different conformations. Quantum chemical calculations led to precise gas-phase structures of the sterically overcrowded trialkylamines exhibiting heights of the NC₃ pyramids and preferred molecular conformers which are similar to those resulting from the X-ray studies.     

Unraveling Dual Aggregation‐Induced Emission Behavior in Steric‐Hindrance Photochromic System for Super Resolution Imaging

Unprecedented dual aggregation‐induced emission (AIE) behavior based on a steric‐hindrance photochromic system is presented, with incorporation one or two bulky aryl groups, resulting in different flexibleness. The dual AIE behavior of open and closed isomers can be explained by restriction of intramolecular rotation (RIR), restriction of intramolecular vibration (RIV), and intermolecular stacking. The large bulky benzothiophene causes restricted rotation, enhancing the emission of open form in solution and weak π–π molecular packing, thereby efficiently enhancing the luminescence performance in the solid state. With incorporation of two large bulky benzothiophene groups, BBTE possesses the most outstanding AIE activity, undergoing highly efficient and reversible off‐to‐on fluorescence in film upon alternating UV and visible light irradiation along with excellent fatigue resistance. The off‐to‐on fluorescent photoswitch is successfully established in super resolution imaging.     

Post‐Modification of the Ethene Bridge in the Rational Design of Photochromic Diarylethenes

Fine‐tuning of the molecular structure of organic bistable compounds to improve their photochromic performance or to introduce additional functions remains an important issue in the development of photoresponsive materials. Diarylethenes bearing heterocyclic moieties belong to the most intensively studied class of organic photochromes due to their excellent photochemical properties. A huge number of diarylethenes have been synthesized so far. Analysis of the literature data shows that there are very worthy examples of diarylethenes developed by the Irie and Feringa groups, which can be the common starting material for a number of diarylethenes functionalized in hetaryl moieties. We refer to these structures as photochromic diarylethene precursors. These diarylethenes have proved to be very useful in the construction of functional molecules with desired properties. On the other hand, in our groups, we have elaborated on diarylethene precursors with modifiable ethene bridges. In this review, we have collected examples of such structures and their chemical modifications, leading to the improvement or fine‐tuning of photochromic switching.     

Supramolecular Crowding Can Avoid Oxygen Quenching of Photon Upconversion in Water

A common challenge in chemistry that deals with photoexcited states is to avoid oxygen quenching. This is crucial for hot research fields such as photon upconversion (UC), in which oxygen-sensitive triplet excited states play pivotal roles. However, methods to avoid oxygen quenching in aqueous media are far more limited despite eagerly anticipated catalytic and biological applications. This work introduces a simple strategy to achieve air-stable triplet–triplet annihilation (TTA)-based UC in water, namely, supramolecular crowding. Amphiphilic cationic acceptor molecules and anions with long alkyl chains co-assemble in water in which hydrophobic donor molecules are molecularly dispersed. Despite the common notion that oxygen molecules diffuse readily across hydrophobic domains in water, more than 80 % of the TTA-UC emission of the obtained hydrophobic co-assemblies is maintained in air-saturated water. This work demonstrates the new promising potential of supramolecular chemistry for photophysical and photochemical functions with oxygen-sensitive species.     

Achieving Enhanced Photochromic Properties of Diarylethene through Host-Guest Interaction in Aqueous Solution

Diarylethene (DTE) has been widely used in fluorescence probes, molecular logic gates, optical data-storage devices owing to the excellent photochromic property, while constructing high-performance photochromic DTE in aqueous media remains a big challenge. Herein we present several host-guest systems formed between cucurbit[n]uril (CB[n], n=7, 8, 10) and two water-soluble DTE derivatives 1 and 2 . It was found that host-guest interactions not only affect the photophysical properties of photochromic guests, but also make great differences on the photoreaction process. Different host-guest binding behaviors also lead to different effects on the photochromic properties of guests. In the presence of CB[n], both 1 and 2 showed enhanced emission and higher fluorescence quenching ratio at photostationary state. Besides, CB[10] ⋅1 exhibited faster response rate in cyclization reaction and better photofatigue resistance than free 1 in aqueous solution, while the supramolecular assembly of (CB[8])_n ⋅ ( 2 )_n showed slower response rate in both directions of the reversible photoreaction. Besides, the photofatigue resistance of 2 can be greatly improved through binding with CB[7]. Our results suggest that host-guest interactions could be an efficient way to improve photochromic properties of DTE in aqueous solution.     

Fatigue and photochromism S1 excited state reactivity of diarylethenes from QTAIM and the stress tensor

The realization of technologically relevant functional systems from idealized photochromic compounds remains elusive due to the double requirement that such switches must possess both highly efficient photo‐isomerization reactivity and extremely low fatigue over a large number of switching cycles. Nowadays, improvements of the switching properties in complex diarylethene structures are mainly attained on a “trial and error” basis through chemical substitutions aimed at tuning the chemical properties of the core of the diarylethene. Therefore, we present new guiding principles to analyze the first excited state reactivity of diarylethenes based on the quantum theory of atoms in molecules (QTAIM) including the stress tensor. This approach straightforwardly provides consistent theoretical justification to partner the already successful symmetric substitution patterns obtained from experiments. The guiding principles provided by QTAIM and stress tensor suggest more complex asymmetric patterns should be included for the systematic design of new technologically relevant functional compounds. The stress tensor trajectory T_σ(s) analysis is used to characterize the photochromism reaction as reusable and the fatigue reaction as irreversible and find candidate sites for alteration by future experiment.     

Photoswitching of an alcohol-sensitive photochromic diarylethene

The closed-ring isomer of diarylethene 1a, 1-(2-methyl-5-(4-N,N-diethylaminophenyl)thien-3-yl)-2-(2-methyl-5-phenylthien-3-yl)perfluorocyclopentene was found to cause the substitution reaction with primary alcohols at room temperature. The open-ring isomer 1a was stable in the alcohols. The product obtained in methanol was isolated by HPLC, and the structure was identified by ¹H NMR, mass spectrometry, and X-ray crystallographic analysis. It was revealed that two fluorine atoms were replaced with methoxy groups. The substitution reaction was also caused with ethylene glycol to form the five-membered ring. Both the products also showed photochromism, and had absorption maxima and photocycloreversion quantum yields different from those of 1a.     

Exploring the Conformational Space of Bridge‐Substituted Dithienylcyclopentenes

Stimuli responsive compounds and materials are of high interest in synthetic chemistry and materials science, with light being the most intriguing stimulus due to the possibility to remote control the physicochemical properties of a molecule or a material. There is a constant quest to design photoswitches with improved switching efficiency and especially diarylethene‐type switches promise photo cyclization quantum yields up to unity. However, only limited attention has been paid towards the influence of the solution conformation on the switching efficiency. Here, we describe a detailed NMR spectroscopic investigation on the conformational distribution of bridge‐substituted dithienylcyclopentenes in solution. We could discriminate between several photoactive and photoinactive as well as two diastereomorphous conformations and show that the trends observed in the switching efficiency match the conformer populations obtained from state of the art NMR parameters in solution.     

2,5‐Difluorenyl‐Substituted Siloles for the Fabrication of High‐Performance Yellow Organic Light‐Emitting Diodes

2,3,4,5‐Tetraarylsiloles are a class of important luminogenic materials with efficient solid‐state emission and excellent electron‐transport capacity. However, those exhibiting outstanding electroluminescence properties are still rare. In this work, bulky 9,9‐dimethylfluorenyl, 9,9‐diphenylfluorenyl, and 9,9′‐spirobifluorenyl substituents were introduced into the 2,5‐positions of silole rings. The resulting 2,5‐difluorenyl‐substituted siloles are thermally stable and have low‐lying LUMO energy levels. Crystallographic analysis revealed that intramolecular π–π interactions are prone to form between 9,9′‐spirobifluorene units and phenyl rings at the 3,4‐positions of the silole ring. In the solution state, these new siloles show weak blue and green emission bands, arising from the fluorenyl groups and silole rings with a certain extension of π conjugation, respectively. With increasing substituent volume, intramolecular rotation is decreased, and thus the emissions of the present siloles gradually improved and they showed higher fluorescence quantum yields (Φ_F=2.5–5.4 %) than 2,3,4,5‐tetraphenylsiloles. They are highly emissive in solid films, with dominant green to yellow emissions and good solid‐state Φ_F values (75–88 %). Efficient organic light‐emitting diodes were fabricated by adopting them as host emitters and gave high luminance, current efficiency, and power efficiency of up to 44 100 cd m^?2, 18.3 cd A^?1, and 15.7 lm W^?1, respectively. Notably, a maximum external quantum efficiency of 5.5 % was achieved in an optimized device.     

Mechanistic Insights into the Triplet Sensitized Photochromism of Diarylethenes

Operating photoswitchable molecules repetitively and reliably is crucial for most of their applications, in particular in (opto)electronic devices, and related to reversibility and fatigue resistance, which both critically depend on the photoisomerization mechanism defined by the substitution pattern. Two diarylethene photoswitches bearing biacetyl triplet sensitizers either at the periphery or at the core were investigated using both stationary as well as transient UV/Vis absorption spectroscopy ranging from the femtosecond to the microsecond time scale. The diarylethene with two biacetyl moieties at the periphery is switching predominantly from the triplet excited state, giving rise to an enhanced fatigue resistance. In contrast, the diarylethene bearing one diketone at the photoreactive inner carbon atom cyclizes from the singlet excited state and shows significantly higher quantum yields for both cyclization and cycloreversion.     

Structure dependent packing behavior of phthalocyanine on the surface of graphite

The surface‐assembly behavior of phthalocyanine is of great importance because of the molecule's important application as an organic semiconductor in electronics and in solar cells. In this work, the surface‐assembly behavior on graphite of four metal phthalocyanines bearing different substituents was investigated by scanning tunneling microscopy. Owing to the difference in the substituents, the packing symmetries of these phthalocyanines are apparently different. The results point out that the packing mode of phthalocyanine is not only influenced by molecular symmetry but also by steric hindrance. Copyright © 2006 John Wiley & Sons, Ltd.     

Photon‐Quantitative 6π‐Electrocyclization of a Diarylbenzo[b]thiophene in Polar Medium

The high reactivity of 6π‐electrocyclization in polar solvents has remained one of the important challenges for diarylethenes because of the emergence of a twisted intramolecular charge transfer (TICT) state at the excited state in such polar media, which usually quenches the photocyclization reaction. Herein we report on the preparation and highly efficient photocyclization of 2,3‐diarylbenzo[b]thiophenes with nonsymmetric side‐aryl units in a polar solvent. While the dithiazolylbenzo[b]thiophene showed a suppressed quantum yield of 6π‐electrocyclization of 54 % in methanol, the replacement of a thiazole unit with a thiophene ring led to a photon‐quantitative 6π‐cyclization reaction. The nonsymmetrical modification into the side‐aryl units was considered to enhance the CH/π interactions between side‐aryl units to support a photoreactive conformation in methanol. The stabilization of the photochromic reactive conformation is expected to suppress the formation of the TICT state at the excited state, leading to highly efficient photoreactivity.     

Two‐Photon Photochromism of a Diarylethene Enhanced by Förster Resonance Energy Transfer from Two‐Photon Absorbing Fluorenes

Resonance energy transfer from two-photon absorbing fluorene derivatives to the photochromic compound 3,4-bis-(2,4,5-trimethyl-thiophen-3-yl)furan-2,5-dione (PC 1) is investigated in hexane under one- and two-photon excitation. The quenching of the steady-state fluorescence of donor molecules in the presence of the diarylethene acceptor is used to study the nature of resonance energy transfer. The F?rster distances and critical acceptor concentrations are determined for nonbound donor-acceptor pairs in homogeneous molecular ensembles. Quite significantly, up to a two-fold enhancement in the velocity of the photochromic transformation of 1, in the presence of two-photon absorbing fluorene derivatives, is demonstrated.