Polarographic study of Tl+, Li+, Na+, K+, and Cs+ complexes with monensin anion in dipolar aprotic solvents

Summary The stability constants,K _sof monensin complexes with Li⁺, Na⁺, K⁺ and Cs⁺ ions were studied by a competitive polarographic method using the Tl⁺/Tl(Hg) redox couple as a sensitive electrochemical probe. TheK _svalues are strongly influenced by the solvents (acetonitrile, propionitrile, acetone, N,N-dimethylformamide, N-methyl pyrolidinone, N,N-dimethylacetamide, dimethylsulfoxide, N,N-diethylformamide and N,N-diethylacetamide were used in experiments) and vary inversely with the Gutmann donicity scale. Molecular mechanics computations revealed the probable structures of the complexes.

---

Polarographische Untersuchung von Tl⁺-, Li⁺-, Na⁺- und Cs⁺-Komplexen mit Monesin-Anion in dipolaren aprotischen Lösungsmitteln

Zusammenfassung Es wurden die StabilitätskonstantenK _svon Monesin-Komplexen mit Li⁺-, Ma⁺- und Cs⁺-Ionen mittels einer competitiven polarographischen Methode unter Verwendung der Tl⁺/Tl(Hg)-Redoxelektrode als sensitiver elektrochemischer Sonde bestimmt. DieK _s-Werte werden stark vom Lösungsmittel (Acetonitril, Propionitril, Aceton, N,N-Dimethylformamid, N-Methylpyrrolidinon, N,N-Dimethylacetamid, Dimethylsulfoxid, N,N-Diethylformamid und N,N-Diethylacetamid) beeinflußt, wobei sie invers zurGutmann schen Donizitätsskala variieren. Die wahrscheinliche Struktur der Komplexe wurde mittels molekularmechanischer Berechnungen ermittelt.

     

金属离子(Na~+、K~+、Ca~(2+)、Mg~(2+)、Zn~(2+))与鸟嘌呤异构体配合物的稳定性

在B3LYP/6-311++G**水平上用极化连续介质模型(PCM)系统研究了金属离子(M+/2+=Na+,K+,Ca2+,Mg2+,Zn2+)和十三种鸟嘌呤异构体形成的配合物GnxM+/2+(n为鸟嘌呤异构体的编号,x表示M+/2+与鸟嘌呤异构体的结合位点)在气(g)液(a)两相中的稳定性顺序.着重探讨了液相中配合物的稳定性差异,并且从溶质-溶剂效应、结合能、形变能及异构体的相对能量等几个方面分析了造成稳定顺序发生变化的原因.报道了溶液中这五种金属离子与鸟嘌呤异构体结合形成的六种基态配合物:aG1N2,N3Na+,aG1N2,N3K+,aG1O6,N7Ca2+,aG1N2,N3Mg2+(aG1O6,N7Mg2+),aG2N3,N9Zn2+.可以看出,除了在Zn2+配合物中鸟嘌呤异构体为G2外,构成其余四种金属离子配合物的鸟嘌呤异构体都是G1,但结合位点不同.同时对气相中各类配合物稳定性也进行了系统的排序,并报道了几种较稳定的配合物,如:gG3N1,O6K+,gG5N1,O6K+,gG3N1,O6Ca2+/Mg2+,gG4O6,N7Ca2+/Mg2+.     

Die Selektivität Kristalliner Cer(IV)-Phosphatsulfathydrate gegenüber Li+, Na+, K+, Rb+, Cs+ und NH in absolutem Methanol und absolutem Dimethylsulfoxid

Selectivity of Crystalline Ce^IV Phosphate Sulphate Hydrates for Li⁺, Na⁺, K⁺, Rb⁺, Cs⁺, and NH in Absolute Methanol and Absolute Dimethylsulphoxide The sequence of exchange capacities of Cerium(IV) phosphate sulphate hydrate (CePO₄)₂(HPO₄)_0.74(SO₄)_0.26 · 4,74 H₂O for alkalimetal ions and ammoniumions in absolute methanol at 25°C for the case of a small excess of the exchanger (in relation to the equivalent amount) is given by K⁺ > Rb⁺ ≥ NH₄⁺ > Cs⁺ > Na⁺ > Li⁺. Between the exchange capacity A of these cations and their ionic radii r (given by Ladd) exists the simple relation A = const./r. For Na⁺ the radius of the inner hydration shell must be considered. In absolute dimethyl-sulphoxide under the same conditions the sequence is K⁺ ≥ NH₄ > Rb⁺ > Na⁺ > Cs⁺ > Li⁺. For K⁺, NH₄, Rb⁺ and Cs⁺ the exchange capacity is given by A = const./r + const. · r⁴. The sequences of the alkali ions in both solvents are among the group of 13 sequences which are physicaly significant according to EISENMANNS 's theory. The results are compared with the observations made with water as solvent.     

Structure of (BEDT-TTF)-Based Organic Metals with Photochromic Nitroprusside Anion (BEDT-TTF)4M[FeNO(CN)5]2, where M = Na+, K+, NH+4, Tl+, Rb+, and Cs+

The crystal and molecular structures of a family of three-component radical cation salts bis(ethylenedithio)tetrathiafulvalene (BEDT-TTF), (BEDT-TTF)₄M[NP]₂, where M = Na⁺, K⁺, NH⁺ ₄, Tl⁺, Rb⁺, and Cs⁺and NP is the nitroprusside anion [FeNO(CN)₅]^2–, are studied by X-ray structure analysis. These salts are isostructural and behave as stable metals down to helium temperatures. Their structures are characterized by radical cation layers of the "-type alternating with layers of complex anions [M⁺(NP^2–)₂]^3–. The conducting radical cation system and photochromic nitroprusside anion in the crystals were shown to affect each other. On the one hand, this changes the geometric parameters of the nitroprusside anion as compared to those of the Na₂[NP] · 2H₂O crystals in the ground state and, on the other hand, makes the geometries of the two crystallographically independent BEDT-TTF molecules with a different number of shortened contacts with the anion different. Based on the data of crystallochemical analysis of the (BEDT-TTF)₄M[FeNO(CN)₅]₂structures, we suggest their possible routes of chemical modification with the purpose of changing their physical properties.     

Napthaquinone derived ionophores: interaction with biologically important metal ions (Li+, Na+, K+, Mg2+ and Ca2+)

The synthetic model systems based on the study of supramolecular compounds are proficient in mimicking the biological processes so as to get the insight of their processes. In this perspective, a series of naphthaquinone derived redox switchable ionophores namely D₁ (2,3,5,6,8,9,11,12-octahydronaphtho [2,3b] [1,4,7,10,13] pentaoxacyclo octadecine-14,19-dione) and D₂ (2,3,5,6,8,9-hexahydronaphtho[2,3-b] [1,4,7,10] tetraoxacyclododecine-11,16-dione) have been synthesized and interacted with Li⁺, Na⁺, K⁺, Ca²⁺, Mg²⁺ cations. The isolated solid state soft materials obtained after interaction were characterized by melting point, TLC, ¹H NMR spectroscopy and CHN estimation. The extraction, transport potential and stability constant determination of these ionophores towards cations helped in investigating their binding strength in solution. The selective extraction of Na⁺ and Li⁺ by D₁ and D₂ correspondingly proves them an efficient compound for the manufacturing of chemosensor. Whereas efficient transport of Mg²⁺ by both the ionophores especially by D₁ may assist in developing biomodels for understanding its transport through membrane in living system. The selectivity of these ionophores towards metal ions can be modulated by molecular tailoring.     

Theoretical study of the interaction of nonactin with Na+, K+, and NH

In an attempt to account for the preferential binding to nonactin of K⁺ relative to Na⁺, theoretical computations are performed using the intermolecular interaction energies of the ionophore with the two cations. Both K⁺ and Na⁺ liganding conformations are considered, and an evaluation is made of the intramolecular energy expenditure caused by the reduction of the size of the cavity. The energy balance for the complexation of the two cations computed by taking into account the cation–ionophore interactions, the interactions between the liganding groups, as well as the desolvation enthalpies of the cations in methanol, favors K⁺ over Na⁺ by 4 to 5 kcal/mol, in fair agreement with the difference in the measured enthalpies of binding. The binding of NH to nonactin is also investigated.     

Bingel–Hirsch Addition of Diethyl Bromomalonate to Ion-Encapsulated Fullerenes M@C60 (M=Ø, Li+, Na+, K+, Mg2+, Ca2+, and Cl−)

In the last 30 years, fullerene-based materials have become popular building blocks for devices with a broad range of applications. Among fullerene derivatives, endohedral metallofullerenes (EMFs, M@C_x) have been widely studied owing to their unique properties and reactivity. For real applications, fullerenes and EMFs must be exohedrally functionalized. It has been shown that encapsulated metal cations facilitate the Diels–Alder reaction in fullerenes. Herein, the Bingel–Hirsch (BH) addition of ethyl bromomalonate over a series of ion-encapsulated M@C₆₀ (M=Ø, Li⁺, Na⁺, K⁺, Mg²⁺, Ca²⁺, and Cl⁻; Ø@C₆₀ stands for C₆₀ without any endohedral metal) is quantum mechanically explored to analyze the effect of these ions on the BH addition. The results show that the incarcerated ion has a very important effect on the kinetics and thermodynamics of this reaction. Among the systems studied, K⁺@C₆₀ is the one that leads to the fastest BH reaction, whereas the slowest reaction is given by Cl⁻@C₆₀.     

Theoretical study of interaction of 2,6-dithiopurine with Li+, Na+, K+, Be2+, Mg2+, and Ca2+ metal cations

The geometries of the complexes of Li⁺, Na⁺, K⁺, Be²⁺, Mg²⁺, and Ca²⁺ metal cations with different possible 2,6-dithiopurine anions (DTP) were studied. The complexes were optimized at the B3LYP level and the 6-311++G(d, p) basis set. The interactions of the metal cations at different nucleophilic sites of various possible 2,6-dithiopurine anions were considered. It was revealed that metal cations would interact with 2,6-dithiopurine anions in a bicoordinate manner. In the gas phase, the most preferred position for the interaction of Li⁺, Na⁺, and K⁺ cations is between the N₃ and S₂ sites, while all divalent cations Be²⁺, Mg²⁺, and Ca²⁺ prefer binding between the N₇ and S₆ sites of the corresponding 2,6-dithiopurine. The influence of aqueous solvent on the relative stability of different complexes has been examined using the Tomasi’s polarized continuum model. The basis set superposition error (BSSE) corrected interaction energy was also computed for complexes. The AIM theory has been applied to analyze the properties of the bond critical points (electron densities and their Laplacians) involved in the coordination between 2,6-dithiopurine anions and the metal cations. It was revealed that aqueous solution would have significant effect on the relative stability of complexes obtained by the interaction of 2,6-dithiopurine anions with Mg²⁺ and Ca²⁺ cations. The effect of metal cations on different NH and CS stretching vibrational modes of 2,6-dithiopurine has also been discussed.     

Effect of ring annelation on cations [M = H+, Li+, Na+, K+, Be2+, Mg2+, and Ca2+]…benzene interaction: A density functional theory investigation

Density functional theory calculation was carried out on cation‐π complexes formed by cations [M = H⁺, Li⁺, Na⁺, K⁺, Be²⁺, Mg²⁺, and Ca²⁺] and π systems of annelated benzene. The cation‐π bonding energy of Be²⁺ or Mg²⁺ with annelated benzene is very strong in comparison with the common cation‐π intermolecular interaction, and the bonding energies follow the order Be²⁺ > Mg²⁺ > Ca²⁺ > Li⁺ > Na⁺ > K⁺. Similarly, the interaction energies follow the trend 1‐M < 2‐M < 3‐M for all the metal cations considered. These outcomes may be due to the weak interactions of the metal cations with C? H and the interactions of metal cations with π in addition to the nature of a metal cation. We have also investigated on all the possible substituted sites, and find that the metal ion tends to interact with all ring atoms while proton prefers to bind covalently to one of the ring carbons. The binding of metal cations with annelated benzenes has striking effect on nuclear magnetic resonance chemical shifts using the gauge independent atomic orbital method. © 2008 Wiley Periodicals, Inc. Int J Quantum Chem, 2009     

Transport of Ca2+, Sr2+, Ba2+, Na+, K+ and Cs+ through hollow fiber supported liquid membrane

The transport of metal ions (Ca²⁺, Sr²⁺, Ba²⁺, Na⁺, K⁺, Cs⁺) through hollow fiber supported dichlorobenzene liquid membrane has been studied. The transport of cations using 8-crown-6 ether as a carrier and picrate as co-counter ion as well as a pertraction device and capillary isotachophoresis (ITP) measurement of the cation concentration is described.     

Design and synthesis of a novel bis-crown ether carrier molecule mimic of (Na+,K+)-ATPase

A new bis-crown ether carrier molecule 3b with an ammonium tall was synthesized to mimic some of the properties of (Na⁺,K⁺)-ATPase activity. At low pH, the ammonium salt shows stabilization by intramolecular hydrogen bonding with the 18-crown-6 portion of the molecule and the compound has some selectivity for the transport of Na⁺ over K⁺ ions. As the pH is increased, the Na⁺ and K⁺ ion-binding ability changes and in the free amino form, the host molecule carries both Na⁺ and K⁺ ions at comparable rates.     

Theoretical study on the interaction of glutathione with group IA (Li+, Na+, K+), IIA (Be2+, Mg2+, Ca2+), and IIIA (Al3+) metal cations

The structures and energies of complexes obtained upon interaction between glutathione (GSH) and alkali (Li⁺, Na⁺, K⁺), or alkaline earth metal (Be²⁺, Mg²⁺, Ca²⁺), or group IIIA (Al³⁺) cations were studied using quantum chemical density functional theory. The characteristics of the interactions between GSH and the metal cations at different nucleophilic sites of GSH were examined selecting systematically, both mono- and multi-coordinating were taken into account. The results indicated that the heteroatom of GSH, the radius and charge of metal ion, and the coordination number of the metal cation with the ligand played important roles in determining the stability of these complexes. Moreover, the intramolecular hydrogen migration in GSH could be promoted by the metal cations during coordination reaction. Furthermore, the Al³⁺ cation might catalyze the decarboxylation reaction and stimulate the formation of covalent bond between S atom and adjacent O atom of GSH.     

A combined experimental and density functional theory study on the complexation ability of 15-crown-5 with Li+, Na+, K+, and NH4 + cations

The complexation processes among Li⁺, Na⁺, K⁺, and NH₄ ⁺ cations with the macrocyclic ligand, 15-crown-5 (15C5) have been studied in acetonitrile–methanol binary mixtures at different temperatures using conductometric method. The stability constants of the resulting 1:1 complexes were calculated from the computer fitting of the molar conductance–mole ratio data at various temperatures. The values of thermodynamic parameters ( $ \Updelta H_{\text{c}}^{^\circ } $ and $ \Updelta S_{\text{c}}^{^\circ } $ ) for the formation of the complexes were obtained from temperature dependence of the stability constants of complexes using van’t Hoff plots. In addition, a theoretical study has been carried out using density functional theory to obtain the stability of the complexes and the geometrical structure of the 15C5 and its complexes with Li⁺, Na⁺, K⁺ and NH₄ ⁺ cations in the gas phase. We compared the experimental data with those obtained by quantum chemistry calculations to investigate the effect of the solvent on complexation process.     

Simultaneous Determination of Na+, K+, Ca2+, Mg2+ and Cl− in Unstimulated and Stimulated Human Saliva Using All Solid State Multisensor Platform

Human saliva is one of the body fluids which collection method is relatively simple and non‐invasive. The article is dedicated to assess concentration (activity) of Na⁺, K⁺, Ca²⁺, Mg²⁺ and Cl⁻ in fresh, unstimulated or stimulated human saliva samples using single solid contact ion‐selective electrodes with conventional reference electrode and self‐made multisensor platform (MP) equipped with ion‐selective membranes for Na⁺, K⁺, Ca²⁺, Mg²⁺ and Cl⁻ and reference electrode made in solid state technology, based on dispersed KCl in the polymer. Both kind of electrodes, single ISE and miniaturized electrodes in multisensor platform (ISE‐MP) were made of glassy carbon. The electrode surfaces have been modified by conductive polymer (PEDOT) layer deposition; with the exception of Cl⁻ electrode, in which conducting polymer was not applied. Potentiometric measurements were used to compare the changes of the ionic composition in various samples of saliva.     

Transport of Na+, K+ ions in a bubbling pseudo-emulsion liquid membrane system with p-tert-butylcalixarenes as carriers

The liquid membrane transport of Na⁺ ions by p-tert-butylcalix[6]arene and that of K⁺ ions by p-tert-butylcalix[8]arene were investigated by means of a bubbling pseudo-emulsion liquid membrane system. This system represents a proton-coupled transport with a flow of protons in the opposite direction. The driving force for the transport is the pH gradient between the source and receiving phases. When the pH difference between the two phases is sufficient, the carriers calix[6]arene(or calix[8]arene) can successfully transport Na⁺ (or K⁺) ions from the source phase with a lower Na⁺ (or K⁺) concentration into the receiving phase with a higher Na⁺ (or K⁺) concentration, like a Na⁺ (or K⁺) ion pump.     

Flavonoid inhibitors of Na+,K+-ATPase

Summary A comparative investigation of the inhibiting influence on transport Na⁺,K⁺-ATPase of four flavone aglycones and eight of their glycosides has been performed on the microsomal fraction of the cells of the cerebral cortex.It has been shown that in concentrations of 1·10^–4 to 5·10^–6 M M myricetin, quercetin, luteolin, and myricetin 3-glucoside possess an appreciable inhibiting effect. For kaempferol and its glycosides, as for the glycosides of quercetin and luteolin, the inhibiting effect is extremely feeble.Institute of Biochemistry, Academy of Sciences of the Uzbek SSR, Tashkent. V. I. Lenin Tashkent State University. Translated from Khimiya Prirodnykh Soedinenii, No. 1, pp. 44–46, January–February, 1977.     

Computational study of the interaction of metal ions (Na+, K+, Mg2+, Ca2+, and Al3+) with Quercetin and its antioxidant properties

In recent years, the chelation between quercetin and transition metals has attracted much attention because the complexes formed have higher antioxidant and medicinal activities. However, the theoretical investigation of the mechanisms of flavonoid functioning along with the structures of quercetin–metal complexes is still not sufficiently studied. In this research work, quercetin–complexes with Na⁺, K⁺, Mg²⁺, Ca²⁺, and Al³⁺ are studied theoretically by using density functional theory (DFT) method in order to investigate the stability, reactivity, nature of interaction, and the application of the quercetin-metal complexes as potential antioxidants. From the Highest Occupied Molecular Orbital (HOMO) and Lowest Unoccupied Molecular Orbital (LUMO) results, the K-quercetin salt was observed to be more stable as compared to the other metals while Ca seemed to be the most reactive with the least values in the neutral form of the metal - quercetin interaction. The results of the antioxidant activity in the neutral state present Ca and Mg to have the higher values of ionization potential (IP) indicating that the antioxidant activity of Ca/Mg complexes with quercetin are less pronounced, while K-complex with the least value indicating the higher the electron donating reactivity. In comparison, it is worth to note that Mg-Q and Ca-Q in the deprotonated state of quercetin showcase lower IP, higher ability of H-atom transfer and electron transfer reactivity, therefore, better antioxidant candidates of the quercetin complexes than their other counterparts.     

An Ab Initio MO Study on Orbital Interaction and Charge Distribution in Alkali Metal Aqueous Solution: Li+, Na+, and K+

The analysis of the orbital interaction between an alkali metal ion and the surrounding solvent molecules is performed for aqueous solutions of Li⁺, Na⁺, and K⁺, by means of the ab initio MO method with the aid of the quantum mechanical (QM)/molecular mechanics (MM) method. A total of 171 water molecules are included for each system. The effect of Li⁺ orbitals reaches as far as 6 Å 7 Å for Na⁺; and 9 Å for K⁺. This effect is caused by the orbital interactions between the valence orbitals of an alkali metal ion and of the surrounding water molecules. The electrostatic interaction and the orbital interaction must not be neglected. The difference in the effect between the alkali metal ions originates from the difference in the valence orbital extensions of the alkali metal ions.     

Comparative Study of Alkali-Cation-Based (Li+, Na+, K+) Electrolytes in Acetonitrile and Alkylcarbonates

The development of a suitable functional electrolyte is urgently required for fast-charging and high-voltage alkali-ion (Li, Na, K) batteries as well as next-generation hybrids supercapacitors. Many recent works focused on an optimal selection of electrolytes for alkali-ion based systems and their electrochemical performance but the understanding of the fundamental aspect that explains their different behaviour is rare. Herein, we report a comparative study of transport properties for LiPF₆, NaPF₆, KPF₆ in acetonitrile (AN) and a binary mixture of ethylene carbonate (EC), dimethyl carbonate (DMC): (EC/DMC : 1/1, weigh) through conductivities, densities and viscosities measurements in wide temperature domain. By application of the Stokes-Einstein, Nernst-Einstein, and Jones Dole equations, the effective ionic solvated radius of cation (r_eff), the ionic dissociation coefficient (α_D) and structuring Jones Dole's parameters (A, B) for salt are calculated and discussed according to solvent or cation nature as a function of temperature. From the results, we demonstrate that better mobility of potassium can be explained by the nature of the ion-ion and ion-solvent interactions due to its polarizability. In the same time, the predominance of triple ions in the case of K⁺, is a disadvantage at high concentration.     

Molecular structure and bonding character of mono and divalent metal cations (Li+, Na+, K+, Be2+, Mg2+, and Ca2+) with substituted benzene derivatives: AIM,NBO, and NMR analyses

Cation–π complexes between several cations (Li⁺, Na⁺, K⁺, Be²⁺, Mg²⁺, and Ca²⁺) and different π-systems such as para-substituted (F, Cl, OH, SH, CH₃, and NH₂) benzene derivatives have been investigated by UB3LYP method using 6-311++G** basis set in the gas phase and the water solution. The ions have shown cation–π interaction with the aromatic motifs. Vibrational frequencies and physical properties such as dipole moment, chemical potential, and chemical hardness of these compounds have been systematically explored. The natural bond orbital analysis and the Bader’s quantum theory of atoms in molecules are also used to elucidate the interaction characteristics of the investigated complexes. The aromaticity is measured using several well-established indices of aromaticity such as NICS, HOMA, PDI, FLU, and FLUπ. The MEP is given the visual representation of the chemically active sites and comparative reactivity of atoms. Furthermore, the effects of interactions on NMR data have been used to more investigation of the studied compounds.