Asymmetric Photochemical Synthesis of Chiral 5‐(R)‐(l)‐Menthyloxy‐4‐Cycloaminobutyrolactones

Through photocatalysed regiospecific and stereoselective additions of cycloamines to 5‐(R)‐(l)‐menthyloxy‐2 (5H)‐furanone (3), chiral 5‐(R)‐(l)‐menthyloxy‐4‐cycloaminobutyrolactones were synthesized. In the new asymmetric photoaddition of compound 3, the N‐methyl cyclic amines (4) gave novel chiral C? C photoadducts (5) in 24–50% isolated yields with d. e. ≥ 98%. However, the secondary cyclic amines (6) afforded optically active N? C photoadducts (7) in 34–58% isolated yields with d. e. ≥ 98% under the same condition. All the synthesized optically active compounds were identified on the basis of their analytical data and spectroscopic data, such as [α]₅₈₉²⁰, IR, ¹H NMR, ¹³C NMR, MS and elementary analysis. The photosynthesis of chiral butyrolactones and its mechanism were discussed in detail.     

Synthese und Kristallstruktur eines μ-Methylen-μ-hydrido-dialanats [R2Al(μ-CH2)(μ-H)AlR2]− (R = CH(SiMe3)2)

Synthesis and Crystal Structure of a μ-Methylene-μ-hydrido-dialanate [R₂Al(μ-CH₂)(μ-H)AlR₂]^? (R = CH(SiMe₃)₂) tert-Butyl lithium reacts with the recently synthesized methylene bridged dialuminium compound [(Me₃Si)₂CH]₂Al? CH₂? Al[CH(SiMe₃)₂]₂ 2 in the presence of TMEDA under β-elimination; the thereby formed hydride anion is bound in a chelating manner by both unsaturated aluminium atoms forming a 3c–2e–Al? H? Al bond. The crystal structure of the product shows two independent molecules differing only slightly in bond lengths and angles, but significantly in conformation. While one of the Al₂CH heterocycles deviates little from planarity with a rough C₂ symmetry for the whole anion, the other one is folded with an angle of 21.1° and the arrangement of the substituents is best described by C_s symmetry.     

Scope and Limitations of the Base‐Free Copper(I) Oxide Catalyzed N‐Heteroarylation of 1H‐(Benz)imidazoles with B‐Heteroarylboronic Acids or 2‐Heteroaryl‐4,4,5,5‐tetramethyl‐1,3,2‐dioxaborolanes

The known, very efficient base‐free copper(I) oxide catalyzed N‐arylation reaction performed in MeOH at room temperature for the synthesis of N‐substituted azoles and amines was extended to the heterocyclic series, i.e., we report herein the base‐free copper(I) oxide catalyzed N‐heteroarylation of 1H‐(benz)imidazole, by means of electron‐rich or electron‐deficient B‐heteroarylboronic acids or 2‐heteroaryl‐4,4,5,5‐tetramethyl‐1,3,2‐dioxaborolanes (Schemes 1 and 2). Under these conditions, N‐heteroarylated 1H‐(benz)imidazoles were obtained in good to excellent yields (Tables 1 and 2). This is the first time that 2‐heteroaryl‐4,4,5,5‐tetramethyl‐1,3,2‐dioxaborolanes were used in this type of reaction.     

Synthesis of Nickel(II) Azacorroles by Pd‐Catalyzed Amination of α,α′‐Dichlorodipyrrin NiII Complex and Their Properties

Synthesis of nickel(II) complexes of meso‐aryl‐substituted azacorroles was performed by Buchwald–Hartwig amination of a dipyrrin Ni^II complex with benzylamine through C? N and C? C coupling. The highly planar structure of Ni^II azacorroles was elucidated by X‐ray diffraction analysis. ¹H NMR analysis and nucleus independent chemical shift (NICS) calculation on Ni^II azacorrole revealed its distinct aromaticity with [17]triaza‐annulene 18π conjugation. In addition, acylation of azacorrole selectively afforded N‐ and C‐acylated azacorroles depending on the reaction conditions, showing the dual reactivity of azacorroles.     

Synthesis of methacrylic copolymers with nona‐1‐butoxy trititanosiloxane as side groups and its application as a thermosetting resin

Methacrylic copolymers with a hydroxyl group on one end of the main chain and nona‐1‐butoxytrititanosiloxane as side groups (called methacrylic hybrid copolymers) were synthesized for use as baked‐finish‐type coating resins. The chemical structures of the side groups in the methacrylic hybrid copolymers were confirmed with the ash weight of the copolymers after combustion, the elemental ratio analysis of Si and Ti in the ash determined by inductively coupled plasma emission spectrometry, and the characteristic absorption band determined by Fourier transform infrared spectrophotometry. The methacrylic hybrid copolymers were cured at temperatures less than 150 °C in the absence of a curing accelerator. The cured copolymers exhibited a high thermal stability. The curing temperature of the copolymers was determined by the change in the absorption peak strength (peak area) of the 1655 cm⁻¹ band in the IR difference spectrum. The thermal stability of the copolymers was evaluated as the thermal‐degradation temperature measured by thermogravimetric analysis. The methacrylic hybrid copolymers were then be used as effective curing resins. The mixture, consisting of thermoplastic methacrylic terpolymer with hydroxyl and carboxyl groups and the methacrylic hybrid copolymers, were cured at less than 150 °C in the absence of a curing accelerator and exhibited a higher thermal‐degradation temperature than the copolymers. © 2001 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 1090–1098, 2001     

RhI‐Catalyzed Regio‐ and Stereospecific Carbonylation of 1‐(1‐Alkynyl)cyclopropyl Ketones: A Modular Entry to Highly Substituted 5,6‐Dihydrocyclopenta[c]furan‐4‐ones

Efficient route : A novel Rh^I‐catalyzed regio‐ and stereospecific carbonylation reaction of (1‐alkynyl)cyclopropyl ketones by selective activation of a carbon? carbon σ bond of the cyclopropane ring was demonstrated (see scheme). This method provides a general, efficient, stereoselective route to synthesise 1,3,5‐trisubstituted and 1,3,5,6‐tetrasubstituted 5,6‐dihydrocyclopenta[c]furan‐4‐one with convertible functional groups.

     

Highly Concise and Stereoselective Total Synthesis of (5R,7S)‐Kurzilactone

A highly concise and stereoselective total synthesis of (5R,7S)‐kurzilactone ( 1 ) was performed by a convergent approach by means of a Jacobsen's hydrolytic kinetic resolution, a Horner? Wadsworth? Emmons reaction for the construction of the α,β‐unsaturated δ‐lactone ring system, and a highly diastereoselective Mukaiyama aldol reaction for the introduction of the formal anti‐1,3‐diol unit (Schemes 2 and 3).     

Stereoselective Synthesis of (−)‐(1R,1′R,5′R,7′R)‐1‐Hydroxy‐exo‐brevicomin and (+)‐exo‐Brevicomin from 3,4,6‐Tri‐O‐acetyl‐D‐glucal

Stereoselective syntheses of (?)‐(1R,1′R,5′R,7′R)‐1‐hydroxy‐exo‐brevicomin ( 1 ) and (+)‐exo‐brevicomin ( 2 ) were accomplished from 3,4,6‐tri‐O‐acetyl‐D ‐glucal ( 5 ; Schemes 2 and 3). Chemoselective reduction, Grignard reaction, Barton? McCombie deoxygenation, and ketalization were used as key steps.     

Synthesis,Characterization and Crystal Structure of Chlorodibenzyltin（Ⅳ） Complex with Dithiomorpholinocarba—mate Ligand

Chlorodibenzyltin (IV) complex with dithiomorpholinocarbamate ligand was synthesized by the reaction of dibenzyltin dichloride with dithiomorpholinocarbamate in 1:1 stoichiometry. The complex was characterized by elementary analysis, UV, BR and ¹H NMR spectra. The crystal structure was determined by X‐ray single crystal diffraction study. The crystallographic data are as follows: triclinic, space group P1 , a = 0.8723 (2) ran, b = 1.099 (2) nm, c = 1.1036 (3) nm, α = 86.498 (4)°, β = 89.697 (5)°, γ = 82.807 (5)°, Z = 2, V = 1.0479 (4) nm³, D_c= 1.580 g/cm^?3, μ = 1.553 mm^?1, F (000) = 500, R₁ = 0.0442, wR₂ = 0.0974. The crystal consists of discrete molecules containing five‐coordinate tin atoms in a distorted tigonal bipyramidal configuration. The molecules are packed in the unit cell in one‐dimensional chain structure through a weak interaction between the chlorine atom and sulfur atom, the sulfur atom and one of the sulfurs of an adjacent molecule.     

The Jubilee of Methyl Jasmonate and Hedione®

An internal historical point of view is presented on the discovery and development of both methyl jasmonate and its saturated analogue Hedione^®. A discussion of the synthetic approaches performed during the last decade, and structure? activity relationships of analogous structures are also presented.     

A One‐Pot Organometallic Route from a 4‐Alkenylpyridine to a 4,4‐Spiro‐Linked Ethyl 1,4‐Dihydropyridine‐1‐carboxylate

In a one‐pot process without isolation of intermediates, (but‐3‐en‐1‐yl)pyridine ( 13 ) is treated sequentially with dicyclohexylborane, trimethylaluminium, and ethyl carbonochloridate yielding ethyl 1,4‐dihydro‐4,4‐(tetramethylene)pyridine‐1‐carboxylate (=ethyl 8‐azaspiro[4.5]deca‐6,9‐diene‐8‐carboxylate; 2 ) in 46% yield based on starting alkenylpyridine 13 (Scheme 5).