Nitroxy/Azido‐Functionalized Triazoles as Potential Energetic Plasticizers

The synthesis of a series of nitroxy‐ and azido‐functionalized compounds, based on 4‐amino‐3,5‐di(hydroxymethyl)‐1,2,4‐triazole, for possible use as an energetic plasticizers is described. All compounds were fully characterized. Two of them were further confirmed by X‐ray single crystal diffraction. Energetic performance was calculated by using EXPLO5 v6.01 based on calculated heats of formation (Gaussian 03) and experimentally determined densities at 25 °C. The results show that the nitration product 1‐nitro‐3,5‐di(nitroxymethyl)‐1,2,4‐triazole, containing a nitro group and two nitroxy groups, exhibits good detonation properties (D=8574 m s^?1, P=32.7 GPa). In addition, its low melting point makes it very attractive as an energetic plasticizer in solid propellants.     

Nitrogen‐Rich Energetic Monoanionic Salts of 3,4‐Bis(1 H‐5‐tetrazolyl)furoxan

3,4‐Bis(1H‐5‐tetrazolyl)furoxan (H₂BTF, 2 ) and its monoanionic salts that contain nitrogen‐rich cations were readily synthesized and fully characterized by multinuclear NMR (¹H, ¹³C) and IR spectroscopy, differential scanning calorimetry (DSC), and elemental analyses. Hydrazinium ( 3 ) and 4‐amino‐1,2,4‐triazolium ( 7 ) salts crystallized in the monoclinic space group P2(1)/n and have calculated densities of 1.820 and 1.764 g cm^?3, respectively. The densities of the energetic salts range between 1.63 and 1.79 g cm^?3, as measured by a gas pycnometer. Detonation pressures and detonation velocities were calculated to be 23.1–32.5 GPa and 7740–8790 m s^?1, respectively.     

Synthesis of novel isoindolone‐based medium‐sized macromolecules and triazole containing heterocyclic compounds

A series of novel isoindolone‐based macromolecules of medium‐sized heterocyclic rings, such as 7,8‐dihydro‐6H‐benzo[4,5][1,6,3]dioxazonino[2,3‐a]isoindol‐14(9aH)‐one derivatives ( 5a‐l ), were synthesized and its frame work incorporating with a triazole moiety on phenol, ie, 2‐(4‐((1‐(2‐methoxyphenyl)‐1H‐1,2,3‐triazol‐4‐yl)methoxy)phenyl)isoindoline‐1,3‐dione ( 9a‐f ) and also a triazole moiety on carboxylic acid, ie, (1‐(2‐methoxyphenyl)‐1H‐1,2,3‐triazol‐4‐yl)methyl 4‐(1,3‐dioxoisoindolin‐2‐yl)benzoate derivatives ( 13a‐e ) with various substitutions on aryl ring system have synthesized. All the synthesized compounds were characterized and confirmed with IR, ¹H NMR_, ¹³C NMR, and ESI mass spectral analysis.     

5‐(1,2,3‐Triazol‐1‐yl)tetrazole Derivatives of an Azidotetrazole via Click Chemistry

N? C bonded (non‐bridged) 5‐(1,2,3‐triazol‐1‐yl)tetrazoles were synthesized by the Cu^I‐catalyzed 1,3‐dipolar azide–alkyne cycloaddition click reaction using 5‐azido‐N‐(propan‐2‐ylidene)‐1H‐tetrazole ( 1 ). For example, the click reaction of 1 in the presence of CuSO₄?5 H₂O and Na ascorbate at 65–70 °C for 48 h in CH₃CN/H₂O co‐solvent was found to be limited to only terminal alkynes that have electron‐withdrawing groups, CF₃C?CH ( 2 a ) and SF₅C?CH ( 2 b ), giving rise to isopropylidene‐[5‐(4‐trifluoromethyl‐1,2,3‐triazol‐1‐yl)tetrazol‐1‐yl]amine ( 3 a ) and isopropylidene‐[5‐(4‐pentafluorosulfanyl‐1,2,3‐triazol‐1‐yl)tetrazol‐1‐yl]amine ( 3 b ) in 47 % and 66 % yields, respectively. When carried out under conditions using CuI and 2,6‐lutidine as catalysts at 0 °C for 13 h in CHCl₃, the click reaction was versatile toward alkynes even those having electron‐donating groups. Properties of new products were determined and compared with those of 1 . Heats of formation, detonation pressures, detonation velocities and impact sensitivities are reported for these new 5‐(1,2,3‐triazol‐1‐yl)tetrazoles.     

Triazole‐Substituted Nitroarene Derivatives: Synthesis,Characterization, and Energetic Studies

A series of dense and energetic polynitroaryl‐1,2,4‐triazoles were synthesized through the nitration of aryl‐1,2,4‐triazoles. The Cu‐catalyzed/base‐mediated coupling reactions of haloarenes with 1,2,4‐triazoles delivered N‐aryl‐1,2,4‐triazoles. These new nitro‐rich‐aryltriazoles were characterized by analytical and spectroscopic methods. The solid‐state structures of most of these compounds were established by X‐ray diffraction analysis. Their thermal properties were determined by differential scanning calorimetry–thermogravimetric analysis. Their heats of formation (HOFs) and crystal densities were also calculated. The densities of the synthesized compounds ranged from 1.40 to 1.85 g cm^?3. Some of these newly synthesized compounds exhibited high positive HOFs, good thermal stabilities, high densities, and reasonable detonation velocities and pressures.     

3-Azido-N-nitro-1H-1,2,4-triazol-5-amine-based energetic salts

Twelve energetic nitrogen‐rich salts based on 3‐azido‐N‐nitro‐1H‐1,2,4‐triazol‐5‐amine were prepared and fully characterized by ¹H, ¹³C NMR, and IR spectroscopy, differential scanning calorimetry (DSC), and elemental analysis. The crystal structures of the neutral compound 3‐azido‐N‐nitro‐1H‐1,2,4‐triazole‐5‐amine ( 1 ) and its triaminoguanidinium salt ( 13 ) were determined by single‐crystal X‐ray diffraction. The density of 1 and its twelve salts ranged from 1.57 to 1.79 g cm^?3, and the heat of formation was calculated with the Gaussian 03 suite of programs. Compounds 1 – 13 exhibit promising detonation performances (pressure: 25.3–39.3 GPa; velocity: 8159–9409 ms^?1; EXPLO 5.05). Impact sensitivities were also determined by hammer tests and resulted ranging from 2.5 J (very sensitive) to >40 J (insensitive).     

Synthesis and Promising Properties of a New Family of High‐Nitrogen Compounds: Polyazido‐ and Polyamino‐Substituted N,N′‐Azo‐1,2,4‐triazoles

A new family of high‐nitrogen compounds, that is, polyazido‐ and polyamino‐substituted N,N′‐azo‐1,2,4‐triazoles, were synthesized in a safe and convenient manner and fully characterized. The structures of 3,3′,5,5′‐tetra(azido)‐4,4′‐azo‐1,2,4‐triazole ( 15 ) and 3,3′,5,5′‐tetra(amino)‐4,4′‐azo‐1,2,4‐triazole ( 23 ) were also confirmed by X‐ray diffraction. Differential scanning calorimetry (DSC) was performed to determine their thermal stability. Their heats of formation and density, which were calculated by using Gaussian 03, were used to determine the detonation performances of the related compounds (EXPLO 5.05). The heats of formation of the polyazido compounds were also derived by using an additive method. Compound 15 has the highest heat of formation (6933 kJ kg^?1) reported so far for energetic compounds and a detonation performance that is comparable to that of octahydro‐1,3,5,7‐tetranitro‐1,3,5,7‐tetrazocine (HMX), while compound 23 has a decomposition temperature of up to 290 °C.     

Green One‐Pot Solvent‐Free Synthesis of Pyrazolo[1,5‐a]pyrimidines,Azolo[3,4‐d]pyridiazines,and Thieno[2,3‐b]pyridines Containing Triazole Moiety

Synthesis of pyrazolo[1,5‐a]pyrimidines, [1,2,4]triazolo[1,5‐a]pyrimidine, 8,10‐dimethyl‐2‐(5‐methyl‐1‐phenyl‐4,5‐dihydro‐1H‐1,2,3‐triazol‐4‐yl)pyrido[2′,3′:3,4]‐pyrazolo[1,5‐a]pyrimidine, benzo[4,5]imidazo[1,2‐a]pyrimidine via heterocyclic amines, and sodium 3‐hydroxy‐1‐(5‐methyl‐1‐phenyl‐1H‐1,2,3‐triazole‐4‐yl)prop‐2‐en‐1‐one were carried out. Also, synthesis of isoxazoles, and pyrazoles from sodium 3‐hydroxy‐1‐(5‐methyl‐1‐phenyl‐1H‐1,2,3‐triazole‐4‐yl)prop‐2‐en‐1‐one and hydroxymoyl chlorides and hydrazonoyl halides, respectively, were made. Analogously, (1,2,3‐triazol‐4‐yl)thieno[2,3‐b]pyridine derivatives were obtained from sodium 3‐hydroxy‐1‐(5‐methyl‐1‐phenyl‐1H‐1,2,3‐ triazole‐4‐yl)prop‐2‐en‐1‐one and cyanothioacetamide followed by its reacting with active methylene compounds. In addition to full characterization of all synthesized compounds, they were tested to evaluate their antimicrobial activities, and some compounds showed competitive activities to those of tetracycline, the typical antibacterial drug, and clotrimazole, the typical antifungal drug.     

Energetic Materials with Promising Properties: Synthesis and Characterization of 4,4′‐Bis(5‐nitro‐1,2,3‐2H‐triazole) Derivatives

Using a variety of functionalization strategies, derivatives of 4, 4′‐bis(5‐nitro‐1,2,3‐2H‐triazole) were designed, synthesized, and characterized. The isomers were separated, their structures were confirmed with single‐crystal X‐ray analysis, and their properties were determined by differential scanning calorimetry, density, impact sensitivity, heat of formation, and detonation velocity and pressure (calculated by EXPLO5 V6.01). Those materials were found to exhibit superior detonation performance when compared with the other fully carbon‐nitrated bis(azoles).     

Study of Six Green Insensitive High Energetic Coordination Polymers Based on Alkali/Alkali‐Earth Metals and 4,5‐Bis(tetrazol‐5‐yl)‐2 H‐1,2,3‐triazole

Constructing insensitive high‐performance energetic coordination polymers (ECPs) with alkali/alkali‐earth metal ions and a nitrogen‐rich organic backbone has been proved to be a feasible strategy in this work. Six diverse dimensional novel ECPs (compounds 1 – 6 ) were successfully synthesized from Na^I, Cs^I, Ca^II, Sr^II, Ba^II ions and a nitrogen‐rich triheterocyclic 4,5‐bis(tetrazol‐5‐yl)‐2 H ‐1,2,3‐triazole (H₃BTT). All compounds show outstanding stability and low sensitivity, the thermal stability of these ECPs are significantly improved as the structural reinforcement increases from 1D to 3D, in which the decomposition temperature of 3D Ba^II based compound 6 is as high as 397 °C. Long‐term storage experiments show that compounds 5 and 6 are stable enough at high temperature. Moreover, the six compounds hold considerable detonation performances, in which Ca^II based compound 5 possesses the detonation velocity of 9.12 km s⁻¹, along with the detonation pressure of 34.51 GPa, exceeding those of most energetic coordination polymers. Burn tests further certify that the six compounds can be versatile pyrotechnics.     

Gem‐dinitromethyl‐substituted Energetic Metal–Organic Framework based on 1,2,3‐Triazole from in situ Controllable Synthesis

Synthesizing energetic metal–organic frameworks at ambient temperature and pressure has been always a challenge in the research area of energetic materials. In this work, through in situ controllable synthesis, energetic metal–organic framework gem‐dinitromethyl‐substituted dipotassium 4,5‐bis(dinitromethyl)‐1,2,3‐triazole with a “cage‐like” crystal packing was obtained and characterized. Most importantly, for the first time, we found that it could be successfully afforded with a catalytic effect of trifluoroacetic acid. This new compound exhibited its high density (2.04 g cm^?3) at ambient temperature, superior detonation velocity (8715 m s^?1) to that of lead azide (5877 m s^?1) and comparable to that of RDX (8748 m s^?1). Its detonation products are mainly N₂ (48.1 %), suggesting it is also a green energetic material. The above‐mentioned performance indicates its potential applications in detonator devices as lead‐free primary explosive.     

Energetic Salts Based on Monoanions of N,N‐Bis(1H‐tetrazol‐5‐yl)amine and 5,5′‐Bis(tetrazole)

High‐density energetic salts that contain nitrogen‐rich cations and the 5‐(tetrazol‐5‐ylamino)tetrazolate (HBTA^?) or the 5‐(tetrazol‐5‐yl)tetrazolate (HBT^?) anion were readily synthesized by the metathesis reactions of sulfate salts with barium compounds, such as bis[5‐(tetrazol‐5‐ylamino)tetrazolate] (Ba(HBTA)₂), barium iminobis(5‐tetrazolate) (BaBTA), or barium 5,5′‐bis(tetrazolate) (BaBT) in aqueous solution. All salts were fully characterized by IR spectroscopy, multinuclear (¹H, ¹³C, ¹⁵N) NMR spectroscopy, elemental analyses, density, differential scanning calorimetry (DSC), and impact sensitivity. Ba(HBTA)₂ ? 4 H₂O crystallizes in the triclinic space group P$\bar 1$ , as determined by single‐crystal X‐ray diffraction, with a density of 2.177 g cm^?3. The densities of the other organic energetic salts range between 1.55 and 1.75 g cm^?3 as measured by a gas pycnometer. The detonation pressure (P) values calculated for these salts range from 19.4 to 33.6 GPa, and the detonation velocities (ν_D) range from 7677 to 9487 m s^?1, which make them competitive energetic materials. Solid‐state ¹³C NMR spectroscopy was used as an effective technique to determine the structure of the products that were obtained from the metathesis reactions of biguanidinium sulfate with barium iminobis(5‐tetrazolate) (BaBTA). Thus, the structure was determined as an HBTA salt by the comparison of its solid‐state ¹³C NMR spectroscopy with those of ammonium 5‐(tetrazol‐5‐ylamino)tetrazolate (AHBTA) and diammonium iminobis(5‐tetrazolate) (A₂BTA).     

Synthesis and Antimicrobial Screening of Some Novel 2‐(5‐(4‐(1H‐Benzo[d][1,2,3]triazol‐1‐yl)phenyl)‐4,5‐dihydro‐1H‐pyrazol‐3‐yl)phenols Incorporated by Triazole Moiety

A novel series of 2‐(5‐(4‐(1H‐benzo[d][1,2,3]triazol‐1‐yl)phenyl)‐4,5‐dihydro‐1H‐pyrazol‐3‐yl)phenols derivative has been synthesized from (E)‐3‐(4‐(1H‐benzo[d][1,2,3]triazol‐1‐yl)phenyl)‐1‐(2‐hydroxyphenyl)prop‐2‐en‐1‐ones in ethanol and hydrazine hydrate under reflux condition. The synthesized compounds were screened for antibacterial activity against Gram‐positive bacteria viz Staphylococcus aureus and Bacillus subtilis and Gram‐negative bacteria viz Escherichia coli and Salmonella typhi, respectively. Some of the tested compounds showed significant antimicrobial activity. IR, ¹H NMR, mass spectral data, and elemental analysis elucidated the structures of all the newly synthesized compounds.     

Acid Catalyzed tert‐Butylation and Tritylation of 4‐Nitro‐1,2,3‐triazole: Selective Synthesis of 1‐Methyl‐5‐nitro‐1,2,3‐triazole via 1‐tert‐Butyl‐4‐nitro‐1,2,3‐triazole

4‐Nitro‐1,2,3‐triazole was found to react with tert‐butanol in concentrated sulfuric acid to yield 1‐tert‐butyl‐4‐nitro‐1,2,3‐triazole as the only reaction product, whereas tert‐butylation and tritylation of 4‐nitro‐1,2,3‐triazole in presence of catalytic amount of sulfuric acid in benzene was found to provide mixtures of isomeric 1‐ and 2‐alkyl‐4‐nitro‐1,2,3‐triazoles with predominance of N2‐alkylated products. A new methodology for preparation of 1‐alkyl‐5‐nitro‐1,2,3‐triazoles from 1‐tert‐butyl‐4‐nitro‐1,2,3‐triazole via exhaustive alkylation followed by removal of tert‐butyl group from intermediate triazolium salts was demonstrated by the example of preparation of 1‐methyl‐5‐nitro‐1,2,3‐triazole.     

4‐Nitro‐3‐(5‐tetrazole)furoxan and Its Salts: Synthesis,Characterization, and Energetic Properties

A series of new energetic salts based on 4‐nitro‐3‐(5‐tetrazole)furoxan (HTNF) has been synthesized. All of the salts have been fully characterized by nuclear magnetic resonance (¹H and ¹³C), infrared (IR) spectroscopy, elemental analysis, and differential scanning calorimetry (DSC). The crystal structures of neutral HTNF ( 3 ) and its ammonium ( 4 ) and N‐carbamoylguanidinium salts ( 9 ) have been determined by single‐crystal X‐ray diffraction analysis. The densities of 3 and its nine salts were found to range from 1.63 to 1.84 g cm^?3. Impact sensitivities have been determined by hammer tests, and the results ranged from 2 J (very sensitive) to >40 J (insensitive). Theoretical performance calculations (Gaussian 03 and EXPLO 5.05) provided detonation pressures and velocities for the ionic compounds 4 – 12 in the ranges 25.5–36.2 GPa and 7934–8919 m s^?1, respectively, which make them competitive energetic materials.     

Bis(4‐nitraminofurazanyl‐3‐azoxy)azofurazan and Derivatives: 1,2,5‐Oxadiazole Structures and High‐Performance Energetic Materials

Bis(4‐nitraminofurazanyl‐3‐azoxy)azofurazan ( 1 ) and ten of its energetic salts were prepared and fully characterized. Computational analysis based on isochemical shielding surface and trigger bond dissociation enthalpy provide a better understanding of the thermal stabilities for nitramine‐furazans. These energetic compounds exhibit good densities, high heats of formation, and excellent detonation velocity and pressure. Some representative compounds, for example, 1 (v_D: 9541 m s^?1; P: 40.5 GPa), and 4 (v_D: 9256 m s^?1; P: 38.0 GPa) exhibit excellent detonation performances, which are comparable with current high explosives such as RDX (v_D: 8724 m s^?1; P: 35.2 GPa) and HMX (v_D: 9059 m s^?1; P: 39.2 GPa).     

Synthesis and Characterization of 5‐(1,2,4‐Triazol‐3‐yl)tetrazoles with Various Energetic Functionalities

In this contribution the synthesis and full structural as well as spectroscopic characterization of three 5‐(1,2,4‐triazol‐3‐yl)tetrazoles along with selected energetic moieties like nitro, nitrimino, and azido groups are presented. The main goal is a comparative study on the influence of those variable energetic moieties on structural and energetic properties. A complete characterization including IR and Raman as well as multinuclear NMR spectroscopy of all compounds is presented. Additionally, X‐ray crystallographic measurements were performed and reveal insights into structural characteristics as well as inter‐ and intramolecular interactions. The standard enthalpies of formation were calculated for all compounds at the CBS‐4M level of theory and reveal high positive heats of formation for all compounds. The calculated detonation parameters (using the EXPLO5.05 program) are in the range of 8000 m s^?1 (8097 m s^?1 ( 5 ), 8020 m s^?1 ( 6 ), 7874 m s^?1 ( 7 )). As expected, the measured impact and friction sensitivities as well as decomposition temperatures strongly depend on the energetic moiety at the triazole ring. The C? C connection of a triazole ring with its opportunity to introduce a large variety of energetic moieties and a tetrazole ring, implying a large energy content, leads to the selective synthesis of primary and secondary explosives.     

An Efficient Synthesis of Mono and Bis‐1,2,3‐triazole AZT Derivatives via Copper(I)‐catalyzed Cycloaddition

An efficient synthesis of novel mono and bis‐1,2,3‐triazoles 3′‐azido‐2′‐deoxythymidine (AZT) derivatives via copper(I)‐catalyzed 1,3‐dipolar cycloaddition reaction is described. Starting from AZT and terminal alkyne derivatives, mono and bis‐1,2,3‐triazole AZT derivatives are regioselectively obtained in good yields under mild conditions using CuSO4·5H2O and sodium ascorbate as a catalyst system, and t‐BuOH/H₂O (1:1, v/v) as a co‐solvent. The structures of these compounds were elucidated by IR, HR MS and NMR.     

Energetic N,N′‐Ethylene‐Bridged Bis(nitropyrazoles): Diversified Functionalities and Properties

A new class of N,N′‐ethylene‐bridged bis(nitropyrazoles) was synthesized and fully characterized. The highly efficient formation of the N,N′‐ethylene bridge was accomplished using dibromoethane and ammonium or potassium pyrazolate. Further functional‐group transformations of diaminobis(pyrazole) and dichlorobis(pyrazole) gave rise to diversified derivatives, including dinitramino‐, diazido‐ and hexanitrobis(pyrazole). Single‐crystal X‐ray diffractions were obtained for hexanitro and diazido derivatives to illustrate the structural characteristics. Heats of formation and detonation performance were calculated by using Gaussian 03 and EXPLO5 v6.01 programs, respectively. Because of the different functionalized groups, the impact and friction sensitivities of these new compounds range from insensitive to sensitive. Among them, the hexanitro derivative displays the most promising overall energetic properties (density (ρ)=1.84 g cm^?3; decomposition temperature (T_d)=250 °C; detonation pressure (P)=34.1 GPa; detonation velocity (v_D)=8759 m s^?1; impact sensitivity (IS)=25 J; friction sensitivity (FS)=160 N), which is competitive with those of 1,3,5‐trinitrotriazacyclohexane (ρ=1.80 g cm^?3; T_d=205 °C; P=35.0 GPa; v_D=8762 m s^?1; IS=7 J; FS=120 N).     

Synthesis and Antimicrobial Activity of N‐Aryl‐4‐(cyano/alkoxycarbonyl)‐5‐(pyridin‐3‐yl)‐1H/3H‐1,2,3‐triazole Derivatives

A convenient synthesis of a new series of N‐aryl‐5‐(pyridin‐3‐yl)‐1H/3H‐1,2,3‐triazole‐4‐carbonitriles and alkyl N‐aryl‐5‐(pyridin‐3‐yl)‐1H/3H‐1,2,3‐triazole‐4‐carboxylic acid esters is reported. The newly synthesized 5‐(pyridin‐3‐yl)‐1,2,3‐triazole derivatives are evaluated for their antibacterial and antifungal activity. Some of these triazole derivatives have exhibited moderate antimicrobial activity.