Reactivity Control of CH Bond Activation over Vanadium-Silver Bimetallic Oxide Cluster Cations

Vanadium-silver bimetallic oxide cluster ions (V(x) Ag(y) O(z) (+) ; x=1-4, y=1-4, z=3-11) are produced by laser ablation and reacted with ethane in a fast-flow reactor. A reflectron time of flight (Re-TOF) mass spectrometer is used to detect the cluster distribution before and after the reactions. Hydrogen atom abstraction (HAA) reactions are identified over VAgO(3) (+) , V(2) Ag(2) O(6) (+) , V(2) Ag(4) O(7) (+) , V(3) AgO(8) (+) , V(3) Ag(3) O(9) (+) , and V(4) Ag(2) O(11) (+) ions, in which the oxygen-centered radicals terminally bonded on V atoms are active sites for the facile HAA reactions. DFT calculations are performed to study the structures, bonding, and reactivity. The reaction mechanisms of V(2) Ag(2) O(6) (+) +C(2) H(6) are also given. The doped Ag atoms with a valence state of +1 are highly dispersed at the periphery of the V(x) Ag(y) O(z) (+) cluster ions. The reactivity can be well-tuned gradually by controlling the number of Ag atoms. The steric protection due to the peripherally bonded Ag atoms greatly enhances the selectivity of the V-Ag bimetallic oxide clusters with respect to the corresponding pure vanadium oxide systems.     

C?H Bond Activation by Metal–Superoxo Species: What Drives High Reactivity?

Metal–superoxo species are ubiquitous in metalloenzymes and bioinorganic chemistry and are known for their high reactivity and their ability to activate inert C H bonds. The comparative oxidative abilities of M–O₂^.− species (M=Cr^III, Mn^III, Fe^III, and Cu^II) towards C H bond activation reaction are presented. These superoxo species generated by oxygen activation are found to be aggressive oxidants compared to their high‐valent metal–oxo counterparts generated by O⋅⋅⋅O bond cleavage. Our calculations illustrate the superior oxidative abilities of Fe^III– and Mn^III–superoxo species compared to the others and suggest that the reactivity may be correlated to the magnetic exchange parameter.     

C?H Bond Activation by Metal–Superoxo Species: What Drives High Reactivity?

Metal–superoxo species are ubiquitous in metalloenzymes and bioinorganic chemistry and are known for their high reactivity and their ability to activate inert C? H bonds. The comparative oxidative abilities of M–O₂^.? species (M=Cr^III, Mn^III, Fe^III, and Cu^II) towards C? H bond activation reaction are presented. These superoxo species generated by oxygen activation are found to be aggressive oxidants compared to their high‐valent metal–oxo counterparts generated by O???O bond cleavage. Our calculations illustrate the superior oxidative abilities of Fe^III– and Mn^III–superoxo species compared to the others and suggest that the reactivity may be correlated to the magnetic exchange parameter.     

Amide‐Directed Tandem C?C/C?N Bond Formation through C?H Activation

The transformation of C? H bonds into other chemical bonds is of great significance in synthetic chemistry. C? H bond‐activation processes provide a straightforward and atom‐economic strategy for the construction of complex structures; as such, they have attracted widespread interest over the past decade. As a prevalent directing group in the field of C? H activation, the amide group not only offers excellent regiodirecting ability, but is also a potential C? N bond precursor. As a consequence, a variety of nitrogen‐containing heterocycles have been obtained by using these reactions. This Focus Review addresses the recent research into the amide‐directed tandem C? C/C? N bond‐formation process through C? H activation. The large body of research in this field over the past three years has established it as one of the most‐important topics in organic chemistry.     

Oxygen‐Promoted C?H Bond Activation at Palladium

[Pd(P(Ar)(tBu)₂)₂] ( 1 , Ar=naphthyl) reacts with molecular oxygen to form Pd^II hydroxide dimers in which the naphthyl ring is cyclometalated and one equivalent of phosphine per palladium atom is released. This reaction involves the cleavage of both C H and O O bonds, two transformations central to catalytic aerobic oxidizations of hydrocarbons. Observations at low temperature suggest the initial formation of a superoxo complex, which then generates a peroxo complex prior to the C H activation step. A transition state for energetically viable C H activation across a Pd peroxo bond was located computationally.     

Carbene–Transition Metal Complexes Formed by Double C?H Bond Activation

The activation of a single sp³ C? H bond of alkanes and their derivatives by electron‐rich transition metal complexes has been a topic of interest since the landmark work by Bergman and Graham in 1982. Ten years later, it was shown that compounds of 5d elements, such as osmium and iridium, even enable a double α‐C? H bond activation of alkane or cycloalkane derivatives containing an OR or NR₂ functional group, thus opening up a new route to obtain Fischer‐type transition metal carbene complexes. Subsequent work focused in particular on the conversion of methyl alkyl and methyl aryl ethers into bound oxocarbenes and also of dimethyl amines to bound aminocarbenes. In the context of this work, it was recently shown that square‐planar oxocarbene–iridium(I) complexes prepared in this way exhibit an unusual mode of reactivity: They react with CO₂, CS₂, COS, PhNCO, and PhNCS by an atom‐ or group‐transfer metathesis, which has no precedent. Organic azides RN₃ and N₂O behave similarly. Recent results confirm that this novel type of metathesis can be made catalytic, thus offering a novel possibility for C? H bond functionalization.     

Asymmetric Intramolecular Carbocyanation of Alkenes by C?C Bond Activation

Versatility : Ni⁰ and Pd⁰ complexes act as catalysts in the intramolecular aryl‐ and acylcyanation reactions, respectively, of alkenes (see scheme). These reactions not only proceed with high yield and selectivity, they also tolerate a wide range of functional groups and can furnish valuable heterocycles such as oxindoles, which are precursors for a myriad of natural and/or biologically active products.

     

B?H,C?H,and B?C Bond Activation: The Role of Two Adjacent Agostic Interactions

Tuning the nature of the linker in a L∼BHR phosphinoborane compound led to the isolation of a ruthenium complex stabilized by two adjacent, δ‐C H and ε‐B_sp2 H, agostic interactions. Such a unique coordination mode stabilizes a 14‐electron “RuH₂P₂” fragment through connected σ‐bonds of different polarity, and affords selective B H, C H, and B C bond activation as illustrated by reactivity studies with H₂ and boranes.     

Synthesis of Phenanthridinones from N‐Methoxybenzamides and Aryltriethoxysilanes through RhIII‐Catalyzed C?H and N?H Bond Activation

An efficient method for the one‐pot synthesis of substituted phenanthridinone derivatives from N‐methoxybenzamides and aryltriethoxysilanes through rhodium‐catalyzed dual C? H bond activation and annulation reactions is described. A double‐cycle mechanism is proposed to account for this catalytic reaction. In addition, isotope‐labeling studies were performed to understand the intimate mechanism of the reaction.     

Palladium‐Catalyzed Dearomative Cyclocarbonylation by C?N Bond Activation

A fundamentally novel approach to bioactive quinolizinones is based on the palladium‐catalyzed intramolecular cyclocarbonylation of allylamines. [Pd(Xantphos)I₂], which features a very large bite angle, has been found to facilitate the rapid carbonylation of azaarene‐substituted allylamines into bioactive quinolizinones in good to excellent yields. This transformation represents the first dearomative carbonylation and is proposed to proceed by palladium‐catalyzed C N bond activation, dearomatization, CO insertion, and a Heck reaction.     

Enantiospecific C?H Activation Using Ruthenium Nanocatalysts

The activation of C H bonds has revolutionized modern synthetic chemistry. However, no general strategy for enantiospecific C H activation has been developed to date. We herein report an enantiospecific C H activation reaction followed by deuterium incorporation at stereogenic centers. Mechanistic studies suggest that the selectivity for the α‐position of the directing heteroatom results from a four‐membered dimetallacycle as the key intermediate. This work paves the way to novel molecular chemistry on nanoparticles.     

Iron‐Catalyzed Chemoselective ortho Arylation of Aryl Imines by Directed C?H Bond Activation

Naheliegende Alternative : Eine eisenkatalysierte Imin‐gesteuerte C‐H‐Aktivierung mit einem Diarylzinkreagens führt eine Arylgruppe in ortho‐Stellung an einem von Acetophenon abgeleiteten Imin ein (siehe Schema); mit einem Palladiumkatalysator tritt dagegen eine gewöhnliche Substitution auf. Die Titelreaktion ist eine milde C‐H‐Aktivierung, die in Gegenwart von 1,2‐Dichlorisobutan mit Arylbromiden, ‐chloriden oder ‐sulfonaten selektiv verläuft.

     

Iron‐Catalyzed Chemoselective ortho Arylation of Aryl Imines by Directed C?H Bond Activation

No Fe‐ar : Iron catalyzes an imine‐directed C? H bond activation to introduce an ortho‐aryl group to an acetophenone‐derived imine using a diarylzinc reagent (see scheme), whereas palladium catalyzes the conventional substitution reaction . The title reaction features mild and selective C? H bond activation in the presence of aryl bromide, chloride, or sulfonate groups, and 1,2‐dichloroisobutane is essential to achieve such selectivity.