Polymerization of graphene oxide nanosheet by using of aminoclay: Electrocatalytic activity of its platinum nanohybrids

This study describes the polymerization of graphene oxide (GO) nanosheet to reduced‐GO‐aminoclay (RGC) by covalent functionalization of chemically reactive epoxy groups on the basal planes of GO with amine groups of magnesium phyllosilicate clay (known as aminoclay). The resulting RGC sheets were characterized and applied to support platinum nanostructures at toluene/water interface. Pt nanoparticles (NPs) with diameters about several nanometers were adhered to RGC sheets by chemical reduction of [PtCl₂(cod)] (cod = cis,cis‐1,5‐cyclooctadiene) complex. Catalytic activity of Pt NPs thin films were investigated in the methanol oxidation reaction. Cyclic voltammetry results exhibit that the Pt/reduced‐GO (RGO) and Pt/RGC thin films showed improved catalytic activity in methanol oxidation reaction in comparison to other Pt NPs thin films, demonstrating that the prepared Pt/RGO and Pt/RGC thin films are promising catalysts for direct methanol fuel cell.     

Synthesis of polydopamine‐coated graphene–polymer nanocomposites via RAFT polymerization

Graphene‐polymer nanocomposites have significant potential in many applications such as photovoltaic devices, fuel cells, and sensors. Functionalization of graphene is an essential step in the synthesis of uniformly distributed graphene‐polymer nanocomposites, but often results in structural defects in the graphitic sp² carbon framework. To address this issue, we synthesized graphene oxide (GO) by oxidative exfoliation of graphite and then reduced it into graphene via self‐polymerization of dopamine (DA). The simultaneous reduction of GO into graphene, and polymerization and coating of polydopamine (PDA) on the reduced graphene oxide (RGO) surface were confirmed with XRD, UV–Vis, XPS, Raman, TGA, and FTIR. The degree of reduction of GO increased with increasing DA/GO ratio from 1/4 to 4/1 and/or with increasing temperature from room temperature to 60 °C. A RAFT agent, 2‐(dodecylthiocarbonothioylthio)?2‐methylpropionic acid, was linked onto the surface of the PDA/RGO, with a higher equivalence of RAFT agent in the reaction leading to a higher concentration of RAFT sites on the surface. Graphene‐poly(methyl methacrylate), graphene‐poly(tert‐butyl acrylate), and graphene‐poly(N‐isopropylacrylamide) nanocomposites were synthesized via RAFT polymerization, showing their characteristic solubility in several different solvents. This novel synthetic route was found facile and can be readily used for the rational design of graphene‐polymer nanocomposites, promoting their applications. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 3941–3949     

Surface and Interface Engineering of Graphene Oxide Films by Controllable Photoreduction

We report herein the engineering of the surface/interface properties of graphene oxide (GO) films by controllable photoreduction treatment. In our recent works, typical photoreduction processes, including femtosecond laser direct writing (FsLDW), laser holographic lithography, and controllable UV irradiation, have been employed to make conductive reduced graphene oxide (RGO) microcircuits, hierarchical RGO micro‐nanostructures with both superhydrophobicity and structural color, as well as moisture‐responsive GO/RGO bilayer structures. Compared with other reduction protocols, for instance, chemical reduction and thermal annealing, the photoreduction strategy shows distinct advantages, such as mask‐free patterning, chemical‐free modification, controllable reduction degree, and environmentally friendly processing. These works indicate that the surface and interface engineering of GO through controllable photoreduction of GO holds great promise for the development of various graphene‐based microdevices.     

The Role of Interphase Interactions in Electrosynthesis of Composites Based of Graphene Oxide and Poly-<Emphasis Type="Italic">o</Emphasis>-Phenylenediamine

The formation of the composite of reduced graphene oxide (RGO) with poly-o-phenylenediamine (PPD) on the surface of SnO₂-coated conducting glasses (CG) is studied by the methods of voltammetry, atomic force microscopy (AFM), electron microscopy (SEM) with energy-dispersive X-ray spectroscopic (EDXS) microanalysis, and electron spectroscopy, When a CG with deposited graphene oxide is placed into aqueous solution of o-phenylenediamine (OPD), the monomer is strongly fixed in the GO matrix, as confirmed by EDXS data. The further redox interaction in the two-phase system GO–OPD initiates polymerization of OPD in the GO film. When anodic polarization in switched on, the oxidation and the further polymerization of OPD go on, while GO is reduced to RGO as a result of mediated reaction to yield the RGO–PPD composite even in the absence of cathodic polarization. The electron spectra of composites reveal the presence of an absorption band close to absorption of individual PPD. According to AFM and SEM data, OPD incorporated into the composite structure keeps RGO from being folded in acidic media. As the time of impregnation increases, the degree of reduction of GO to RGO changes, which is reflected in the surface morphology and the amount of monomer in the composite (RGO–PPD)-1. The coating becomes black, which is typical of RGO, and its conductivity increases by 4–5 orders of magnitude.     

Preparation of porous polyimide/in‐situ reduced graphene oxide composite films for electromagnetic interference shielding

Herein we report an easy and efficient approach to prepare lightweight porous polyimide (PI)/reduced graphene oxide (RGO) composite films. First, porous poly (amic acid) (PAA)/graphene oxide (GO) composite films were prepared via non‐solvent induced phase separation (NIPS) process. Afterwards PAA was converted into PI through thermal imidization and simultaneously GO dispersed in PAA matrix was in situ thermally reduced to RGO. The GO undergoing the same thermal treatment process as thermal imidization was characterized with thermogravimetric analysis, Raman spectra, X‐ray photoelectron spectroscopy and X‐ray diffraction to demonstrate that GO was in situ reduced during thermal imidization process. The resultant porous PI/RGO composite film (500‐µm thickness), which was prepared from pristine PAA/GO composite with 8 wt% GO, exhibited effective electrical conductivity of 0.015 S m^?1 and excellent specific shielding efficiency value of 693 dB cm² g^?1. In addition, the thermal stability of the porous PI/RGO composite films was also dramatically enhanced. Compared with that of porous PI film, the 5% weight loss temperature of the composite film mentioned above was improved from 525°C to 538°C. Moreover, tensile test showed that the composite film mentioned above possessed a tensile strength of 6.97 MPa and Young's modulus of 545 MPa, respectively. Copyright © 2016 John Wiley & Sons, Ltd.     

The Preparation of Compressible and Fire‐Resistant Sponge‐Supported Reduced Graphene Oxide Aerogel for Electromagnetic Interference Shielding

We here report a facile method to fabricate a sponge‐supported reduced graphene oxide aerogel (S‐RGOA) using a commercial melamine sponge and graphene oxide (GO). Firstly, GO sheets were self‐assembled within the melamine sponge by the assistance of a chemical cross‐linking agent; and then, freeze‐drying and thermal treatment were adopted to prepare S‐RGOA, in which continuous porous reduced graphene oxide (RGO) network formed between the skeleton. The resulting S‐RGOA exhibited a high electromagnetic interference shielding effectiveness (EMI SE) of 20.4‐27.3 dB in 8–12 GHz and the specific EMI SE could reach 1437 dB?cm³g^?1. The mechanical test suggests that the lightweight S‐RGOA is compressible and possesses low energy dissipation. Burning and TGA measurements indicate that S‐RGOA is fire‐resistant and has excellent thermal stability. Our work provides an economical and environmentally‐friendly method to fabricate RGO aerogels for using as electromagnetic interference materials.     

The reduction of graphene oxide by elemental copper and its application in the fabrication of graphene supercapacitor

In this work, graphene oxide (GO) was directly reduced by copper to reduced graphene oxide (RGO) and formed a highly uniform RGO film on copper foil or copper-modified titanium (Ti) substrate. The characterization of as-prepared RGO film by FTIR and XRD indicated that GO was partially reduced by copper while some oxygen-containing groups still remained. The conductivity of the RGO film was improved from 3.76?×?10³ to 2.98?×?10⁴ S/m after it was further electrochemically reduced due to the removal of additional oxygen groups. The graphene supercapacitor prepared with this method exhibited better performances in a neutral aqueous electrolyte compared with that reported for graphene electrodes prepared by other fabrication methods.     

Activated carbon/graphene composites with high-rate performance as electrode materials for electrochemical capacitors

Glucose-derived activated carbon (GAC)/reduced graphene oxide (RGO) composites are prepared by pre-carbonization of the precursors (aqueous mixture of glucose and graphene oxide) and KOH activation of the pyrolysis products. The effect of the mass ratio of graphene oxide (GO) in the precursor on the electrochemical performance of GAC/RGO composites as electrode materials for electrochemical capacitors is investigated. It is found that the thermally reduced graphene oxide sheets serves as a wrinkled carrier to support the activated carbon particles after activation. The pore size distribution and surface area are depended on the mass ratio of GO. Besides, the rate capability of GAC is improved by the introduction of GO in the precursor. The highest specific capacitance of 334 F g^?1 is achieved for the GAC/RGO composite prepared from the precursor with a GO mass ratio of 3 %.     

LDPE/EVA/graphene nanocomposites with enhanced mechanical and gas permeability properties

In the present work, graphene oxide (GO) and reduced graphene oxide (RGO) were incorporated at low‐density polyethylene (LDPE)/ethylene vinyl acetate (EVA) copolymer blend using solution casting method. Monolayer GO with 1‐nm thickness and good transparency was synthesized using the well‐known Hummers's method. Fourier transform infrared and X‐ray photoelectron spectroscopy data exhibited efficient reduction of GO with almost high C/O ratio of RGO. Scanning electron microscopy showed the well distribution of GO and RGO within LDPE/EVA polymer matrix. The integrating effects of GO and RGO on mechanical and gas permeability of prepared films were examined. Young's modulus of nanocomposites are improved 65% and 92% by adding 7 wt% of GO and RGO, respectively. The tensile measurements showed that maximum tensile strength emerged in 3 wt% of loading for RGO and 5 wt% for GO. The measured oxygen and carbon dioxide permeability represented noticeably the attenuation of gas permeability in composite films compared with pristine LDPE/EVA blend. Copyright © 2015 John Wiley & Sons, Ltd.     

Research on WPU‐RGO/ATP‐Fe3O4/chitosan composites with excellent electrical and magnetic properties

First, attapulgite‐Fe₃O₄ magnetic filler (ATP‐Fe₃O₄) was prepared by using a chemical precipitation method. Subsequently, graphite oxide (GO) was prepared through Hummer method, and then reduced GO (RGO) was prepared through GO reduced by chitosan (CS). Finally, a series of WPU‐RGO/ATP‐Fe₃O₄/CS composites were prepared by introduced RGO/ATP‐Fe₃O₄/CS to waterborne polyurethane. The structure and properties were characterized by scanning electron microscopy (SEM), Fourier transform infrared (FTIR), X‐ray diffraction (XRD), vibrating sample magnetometry (VSM), thermogravimetric analysis TGA, conductivity test, and tensile test. The experimental results indicated that thermal stability and tensile strength of nanocomposites were improved with the increase of the content of RGO/ATP‐Fe₃O₄/CS. Meanwhile, with the increase of the RGO/ATP‐Fe₃O₄/CS content, the electrical and magnetic properties of WPU‐RGO/ATP‐Fe₃O₄/CS composites were improved. When the content of RGO/ATP‐Fe₃O₄/CS was 8 wt%, the electrical conductivity and the saturation magnetic strength of WPU‐RGO/ATP‐Fe₃O₄/CS composites were 3.1 × 10^?7 S·cm^?1 and 1.38 emu/g, respectively. WPU‐RGO/ATP‐Fe₃O₄/CS composites have excellent electrical and magnetic properties.     

Electromagnetic properties of Fe3O4‐functionalized graphene and its composites with a conducting polymer

Hybrid materials of Fe₃O₄‐decorated reduced graphene oxide (Fe₃O₄‐RGO) and poly(3,4‐ethylenedioxythiophene) (PEDOT) were prepared by poly(ionic liquid)‐mediated hybridization. In this hybrid material, poly(ionic liquid) was found to perform multiple roles for: (1) stabilizing Fe₃O₄‐RGO against aggregation in the reaction medium, (2) transferring Fe₃O₄‐RGO nanomaterials from aqueous into organic phase, and (3) associating Fe₃O₄‐RGO nanomaterials with PEDOT. The hybrid materials of Fe₃O₄‐RGO with PEDOT showed the lowest surface resistivity of 80 Ω sq^?1 at an RGO‐Fe₃O₄ loading of 1 wt %, and exhibited superparamagnetic behavior with an electromagnetic interference shielding effectiveness of 22 dB. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Functionalization of Reduced Graphite Oxide Sheets with a Zwitterionic Surfactant

Films of a few layers in thickness of reduced graphite oxide (RGO) sheets functionalized by the zwitterionic surfactant N‐dodecyl‐N,N‐dimethyl‐3‐ammonio‐1‐propanesulfonate (DDPS) are obtained by using the Langmuir–Blodgett method. The quality of the RGO sheets is checked by analyzing the degrees of reduction and defect repair by means of X‐ray photoelectron spectroscopy, atomic force microscopy (AFM), field‐emission scanning electron microscopy (SEM), micro‐Raman spectroscopy, and electrical conductivity measurements. A modified Hummers method is used to obtain highly oxidized graphite oxide (GO) together with a centrifugation‐based method to improve the quality of GO. The GO samples are reduced by hydrazine or vitamin C. Functionalization of RGO with the zwitterionic surfactant improves the degrees of reduction and defect repair of the two reducing agents and significantly increases the electrical conductivity of paperlike films compared with those prepared from unfunctionalized RGO.     

Graphene wrapped phthalocyanine: Enhanced oxidative desulfurization for dibenzothiophene in fuel

Graphene wrapped metal phthalocyanine (MPc/RGO, M = Mn²⁺, Fe²⁺, Co²⁺, Ni²⁺, Cu²⁺, Zn²⁺) composites are synthesized by a facile ‘in situ hydrothermal’ method, using graphene oxide, M (CH₃COO)₂ and phthalic anhydride as the precursors. A biomimetic catalytic system of MPc/RGO and molecular O₂ have high activity for ultra‐deep removal of dibenzothiophene (DBT) in model oil containing n‐octane. Compared with pure graphene oxide and MPc, MPc/RGO composites displayed highly enhanced catalytic activity for the oxidation of dibenzothiophene in n‐octane. The conversion ratio of DBT was up to 97.51% after 180 min treatment at 60 °C and atmospheric pressure. The photostability of RGO/MPc composites photocatalystic degradation of dibenzothiophene was investigated. Mechanistic studies revealed that the RGO/MPc ? O₂ · species were the main active intermediate via the π‐π stacking interaction of MPc and RGO. The RGO wrapped phthalocyanine materials offer great potential as active photocatalysts for degradation of thiophene derivatives in fuel.     

Chelator‐Free Radiolabeling of Nanographene: Breaking the Stereotype of Chelation

Macrocyclic chelators have been widely employed in the realm of nanoparticle‐based positron emission tomography (PET) imaging, whereas its accuracy remains questionable. Here, we found that ⁶⁴Cu can be intrinsically labeled onto nanographene based on interactions between Cu and the π electrons of graphene without the need of chelator conjugation, providing a promising alternative radiolabeling approach that maintains the native in vivo pharmacokinetics of the nanoparticles. Due to abundant π bonds, reduced graphene oxide (RGO) exhibited significantly higher labeling efficiency in comparison with graphene oxide (GO) and exhibited excellent radiostability in vivo. More importantly, nonspecific attachment of 1,4,7‐triazacyclononane‐1,4,7‐triacetic acid (NOTA) on nanographene was observed, which revealed that chelator‐mediated nanoparticle‐based PET imaging has its inherent drawbacks and can possibly lead to erroneous imaging results in vivo.     

一步法制备还原态氧化石墨烯载铂纳米粒子及其对甲醇氧化的电催化性能

以天然石墨为原料,采用改进的Hummers法制备氧化石墨.然后采用简单的一步化学还原法在乙二醇(EG)中同时还原氧化石墨烯(GO)和H₂PtCl₆制备高分散的铂/还原态氧化石墨烯(Pt/RGO)催化剂.采用傅里叶变换红外(FTIR)光谱、X射线衍射(XRD)和透射电子显微镜(TEM)对催化剂的微结构、组成和形貌进行表征.结果表明, GO已被还原成RGO, Pt纳米粒子均匀分散在RGO表面,粒径约为2.3 nm.采用循环伏安法和计时电流法评价催化剂对甲醇氧化的电催化性能,测试结果表明, Pt/RGO催化剂对甲醇氧化的电催化活性和稳定性与Pt/C和Pt/CNT相比有了很大提高.另外其对甲醇电催化氧化的循环伏安图中正扫峰电流密度(I_f)和反扫峰电流密度(I_b)的比值高达1.3,分别是Pt/C和Pt/CNT催化剂的2.2和1.9倍,表明Pt/RGO催化剂具有高的抗甲醇氧化中间体CO_ad的中毒能力.     

Dual Amplified Electrochemical Immunosensor for Hepatitis B Virus Surface Antigen Detection Using Hemin/G‐Quadruplex Immobilized onto Fe3O4‐AuNPs or (Hemin‐Amino‐rGO‐Au) Nanohybrid

A sensitive electrochemical immunosensor for Hepatitis B virus surface antigen (HBsAg) detection was fabricated based on hemin/G‐quadruplex interlaced onto Fe₃O₄‐AuNPs or hemin ‐amino‐reduced graphene oxide nanocomposite (H‐amino‐rGO‐Au). G‐quadruplex DNAzyme, which is composed of hemin and guanine‐rich nucleic acid, is an effective signal amplified tool for its outstanding peroxidase activity and Fe₃O₄‐AuNPs or (H‐amino‐rGO‐Au) nanocomposites with quasi‐enzyme activity provide appropriate support for the immobilization of hemin/G‐quadruplex. The target protein was sandwiched between the primary antibody immobilized on the GO and secondary antibody immobilized on the Fe₃O₄‐AuNPs or (H‐amino‐rGO‐Au) nanocomposites and glutaraldehyde was used as linking agent for the immobilization of primary antibody on the surface of GO. Both Fe₃O₄‐AuNPs and H‐amino‐rGO‐Au nanocomposite and also hemin/G‐quadruplex can cooperate the electrocatalytic reduction of H₂O₂ in the presence of methylene blue as mediator. The proposed immunosensor has a wide linear dynamic range of 0.1 pg/ml to 300 pg/ml with a detection limit of 60 fg/ml when Fe₃O₄‐AuNPs was used for immobilization of hemin/G‐quadruplex, while the dynamic range and DL were 0. 1–1000 pg/mL and 10 fg/mL, respectively in the presence of H‐amino‐rGO‐ Au nanocomposite as platform for immobilizing of hemin/G‐quadruplex. The proposed immunosensor was also used for analysis of HBsAg in spiked human serum samples with satisfactory results.     

Nanostructure Restoration of Thermally Reduced Graphene Oxide Electrode upon Incorporation of Nafion for Detection of Trace Heavy Metals in Aqueous Solution

High performance reduced graphene oxide (RGO)‐Nafion (N) thin film electrodes coated on silicon (Si) substrates (RGO‐N/Si) were successfully developed through thermal reduction of GO‐N without delamination from the substrates. The restoration of the RGO‐N nanostructure upon the addition of Nafion was proven by Raman spectroscopy (RS) and field emission scanning electron microscopy, and the restoration mechanism of the RGO‐N nanostructure was proposed. Through the investigation using x‐ray photoelectron spectroscopy (XPS), the polyfluorocarbon from Nafion possessed a function that could prevent the delamination of the RGO sheets from the substrates during the thermal reduction. The RGO‐N/Si samples were later used for the determination of trace heavy metals, such as divalent lead, cadmium and copper ions (Pb²⁺, Cd²⁺ and Cu²⁺, respectively) using square wave anodic stripping voltammetry in a 0.1 M acetate buffer solution (pH 5). Based on the electroanalytical measurements, the RGO‐N/Si samples exhibited a highly linear behavior in the detection of Cd²⁺, Pb²⁺ and Cu²⁺ over the concentration range of 50 nM to 300 nM with detection limits at nM levels. In addition, the RGO‐N/Si samples presented good recoveries of target metals in tap water samples.     

Reduced Graphene Oxide–Ag3PO4 Heterostructure: A Direct Z‐Scheme Photocatalyst for Augmented Photoreactivity and Stability

A visible light driven, direct Z‐scheme reduced graphene oxide–Ag₃PO₄ (RGO–Ag₃PO₄) heterostructure was synthesized by means of a simple one‐pot photoreduction route by varying the amount of RGO under visible light illumination. The reduction of graphene oxide (GO) and growth of Ag₃PO₄ took place simultaneously. The effect of the amount of RGO on the textural properties and photocatalytic activity of the heterostructure was investigated under visible light illumination. Furthermore, total organic carbon (TOC) analysis confirmed 97.1 % mineralization of organic dyes over RGO–Ag₃PO₄ in just five minutes under visible‐light illumination. The use of different quenchers in the photomineralization suggested the presence of hydroxyl radicals ( ^. OH), superoxide radicals ( ^. O₂^?), and holes (h⁺), which play a significant role in the mineralization of organic dyes. In addition to that, clean hydrogen fuel generation was also observed with excellent reusability. The 4 RGO–Ag₃PO₄ heterostructure has a high H₂ evolution rate of 3690 μmol h^?1 g^?1, which is 6.15 times higher than that of RGO.     

Facile and Reversible Formation of Iron(III)–Oxo–Cerium(IV) Adducts from Nonheme Oxoiron(IV) Complexes and Cerium(III)

Ceric ammonium nitrate (CAN) or Ce^IV(NH₄)₂(NO₃)₆ is often used in artificial water oxidation and generally considered to be an outer‐sphere oxidant. Herein we report the spectroscopic and crystallographic characterization of [(N4Py)Fe^III‐O‐Ce^IV(OH₂)(NO₃)₄]⁺ ( 3 ), a complex obtained from the reaction of [(N4Py)Fe^II(NCMe)]²⁺ with 2 equiv CAN or [(N4Py)Fe^IV=O]²⁺ ( 2 ) with Ce^III(NO₃)₃ in MeCN. Surprisingly, the formation of 3 is reversible, the position of the equilibrium being dependent on the MeCN/water ratio of the solvent. These results suggest that the Fe^IV and Ce^IV centers have comparable reduction potentials. Moreover, the equilibrium entails a change in iron spin state, from S =1 Fe^IV in 2 to S =5/2 in 3 , which is found to be facile despite the formal spin‐forbidden nature of this process. This observation suggests that Fe^IV=O complexes may avail of reaction pathways involving multiple spin states having little or no barrier.     

还原态氧化石墨烯载Pd纳米催化剂对甲酸氧化的电催化性能

采用改进的Hummers法氧化石墨后,对其超声剥离成氧化石墨烯水溶液,继之通过乙二醇还原Pd金属离子和氧化石墨烯,得到了还原态氧化石墨烯（RGO）负载Pd纳米催化剂,并用于甲酸的电催化氧化.透射电子显微镜和X射线衍射结果显示：负载于RGO上的Pd粒子平均粒径为3.8nm,其优先在RGO的褶皱和边缘处生长.电化学测试表明：RGO上残存的含氧基团降低了Pd催化剂受CO毒化的程度,Pd/RGO催化剂表现出了较商业化Pd/C更高的电催化活性和更好的稳定性.