Determination of Bisphenol A Using an Electrochemical Sensor Based on a Molecularly Imprinted Polymer-Modified Multiwalled Carbon Nanotube Paste Electrode

A novel electrochemical sensor for bisphenol A was developed through the combination of a molecular imprinting technique with a multiwalled carbon nanotube paste electrode. A molecularly imprinted polymer and nonimprinted polymer were synthesized in the presence and absence of bisphenol A, and then used to prepare the electrode. The bisphenol A imprinted polymer was applied as a selective recognition element in the electrochemical sensor. Differential pulse voltammetry was used to characterize the electrochemical behavior of bisphenol A at the modified electrodes. The results showed that the imprinted sensor had highest response for bisphenol A. Parameters including the carbon paste composition, pH, and adsorption time for the imprinted sensor were optimized. Under the optimized conditions, the differential pulse voltammetry peak current was linear with the concentration of bisphenol A from 0.08 to 100.0 µM, with a detection limit of 0.022 µM. The imprinted sensor for bisphenol A exhibited good selectivity, stability, and reproducibility. This sensor was successfully used for the determination of bisphenol A in real water samples.     

Lead-doped carbon ceramic electrode as a renewable surface composite electrode for the preparation of lead dioxide film and detection of <Emphasis Type="SmallCaps">l</Emphasis>-tyrosine

Lead-doped carbon ceramic electrode as a new type of renewable composite electrode was prepared by mixing the lead powder with electrode matrix before gelation. Pb on the electrode surface was then converted to lead dioxide by the potential scanning of the composite electrode in 0.1 M NaOH solution in the range of ? 0.3 to 0.7 V versus SCE. The composition and morphology of the electrodes were studied by energy dispersive X-ray spectrometry, scanning electron microscopy, and atomic force microscopy techniques. Cyclic voltammetry and chronoamperometry techniques were also used to study the electrocatalytic activity of the modified electrode toward the oxidation of the l-tyrosine. The best results were obtained at a working potential of 0.45 V (vs. SCE) in 0.1 M NaOH solution. The sensor exhibited a good linear response in the range of 5–1458 µM with a coefficient of determination of 0.9963. The detection limit was 0.77 µM, and sensitivity was 37.4 μA mM^?1. In addition, the modified electrode showed high stability and interference-free response for to detection of the l-tyrosine.     

Voltammetric measurement of trace amount of glutathione using multiwall carbon nanotubes as a sensor and chlorpromazine as a mediator

In this work, we propose chlorpromazine as a new mediator for the rapid, sensitive, and highly selective voltammetric determination of glutathione (GSH) using multiwall carbon nanotubes paste electrode (MWCNTPE). The experimental results showed that the carbon nanotubes paste electrode has a highly electrocatalytic activity for the oxidation of GSH in the presence of chlorpromazine as a mediator. Cyclic voltammetry, double potential step chronoamperometry, and differential pulse voltammetry (DPV) are used to investigate the suitability of chlorpromazine at the surface of MWCNTPE as a mediator for the electrocatalytic oxidation of GSH in aqueous solutions. It is shown that chlorpromazine can catalyze the oxidation of GSH in an aqueous buffer solution to produce a sharp oxidation peak current at about +0.70 versus Ag/AgCl as a reference electrode. Kinetic parameters such as electron transfer coefficient and catalytic reaction rate constant, k/h, are also determined. Using DPV and under the optimum conditions at pH 4.0, the electrocatalytic oxidation peak current of GSH shows a linear dependence on GSH concentration in the GSH concentration range of 0.3 to 18.3 µM. The detection limit (3σ) is determined to be 0.16 µM. The relative standard deviation for 1.5 and 5.0 µM GSH are found to be 3.7% and 2.5%, respectively. The proposed method may, thus, also be used as a novel, selective, simple, and precise method for the voltammetric determination of GSH in such real samples as hemolyzed erythrocyte.     

Ionic silsesquioxane film immobilized on silica applied in the development of carbon paste electrode for determination of methyl parathion

A mesoporous silica-based hybrid material composed of silica xerogel modified with an ionic silsesquioxane, which contains the 1,4-diazoniabicyclo[2.2.2]octane chloride group, was obtained. The silsesquioxane film is highly dispersed on the surface. This hybrid material was utilized to develop a carbon paste electrode (CPE) for determination of methyl parathion. Transmission FTIR, elemental analysis and N₂ adsorption–desorption isotherms were used for characterization of the material. The electrochemical behavior of methyl parathion was evaluated by cyclic voltammetry and differential pulse voltammetry. It was observed a linear response to methyl parathion in the concentration range from 1.25 × 10^?7 to 2.56 × 10^?6 mol L^?1 by employing the carbon paste electrode, in Britton–Robinson buffer solution (pH 6). The achieved detection limit (3 SD of the blank divided by the slope of calibration curve) was 0.013 µmol L^?1 and sensitivity was 6.3 µA µmol L^?1. This result shows the potentiality of this electrode for application as electrochemical sensor for methyl parathion.     

Thionine-functionalized graphene oxide,new electrocatalyst for determination of nitrite

In this work, thionine (Th) was assembled on the surface of graphene oxide as an electron transfer mediator using diazonium reaction (Th–GO). Then, Th–GO was characterized by different methods such as scanning electron microscopy, transmission electron microscopy, and Fourier transform infrared spectroscopy. Afterward, Th–GO was used for the modification of carbon paste electrode. Several electrochemical methods including cyclic voltammetry, differential pulse voltammetry, and hydrodynamic amperometry were used to investigate the behavior of the modified electrode. Then, the role of the modified electrode for oxidation of nitrite has been studied. For this purpose, the effect of critical experimental parameters including step potential and pulse amplitude (in differential pulse voltammetry technique), applied potential, the rotating speed of the disk (in amperometry technique), and the solution pH was investigated. Under the optimized conditions, the currents were found to be linear with the nitrite concentration in the range 0.05–33.0 and 0.5–800 µmol L^?1 with detection limits of 0.02 and 0.2 µmol L^?1 using differential pulse voltammetry and hydrodynamic amperometry, respectively. The introduced modified electrode showed good repeatability (RSD% = 3.2) and reproducibility (RSD% = 4.7). This electrochemical sensor was exerted successfully for the determination of nitrite and nitrate in real samples including water and wastewater samples.     

A promising electrochemical sensing platform based on copper nanoparticles-decorated polymer in carbon nanotube electrode for monitoring methimazole

In this paper, a novel and convenient electrochemical sensor for detection of methimazole (MMI) by differential pulse voltammetry is presented. This sensor was fabricated by dripping well-dispersed MWCNTs onto glassy carbon electrode (GCE) surface, and then poly-l-Arg (P-L-Arg) film was deposited on the electrode. Finally, Cu nanoparticles (CuNPs) were electrochemically deposited on the resulting film by using cyclic voltammetry to prepare CuNPs-P-L-Arg/MWCNTs/GCE. The surface morphology of the electrodes has been studied by scanning electron microscopy. Studies reveal that the irreversible oxidation of MMI was highly facile on CuNPs-P-L-Arg/MWCNTs/GCE. The dynamic detection range of this sensor to MMI was 5.2–50 µM, with the detection limit of 2 µM. A new voltammetric method for determination of MMI was erected and shows good sensitivity and selectivity, very easy surface update and good stability. The analytical application of the modified electrode is demonstrated by determining MMI in biological fluids (serum).     

Electrochemical Determination of Dopamine Using a Carboxyl-functionalized Carbon Nanotube-Modified Carbon Paste Electrode Doped with Polymeric Ferric Sulfate

A novel electrochemical device for the sensitive determination of dopamine was developed based on a carbon paste electrode with polymeric ferric sulfate doped in the carbon paste and a carboxyl-functionalized carbon nanotube thin film on the surface. The modified electrode was characterized by scanning electron microscopy, electrochemical impedance spectroscopy, and cyclic voltammetry. The conditions for the preparation of electrode were optimized. The carbon nanotubes were shown to be stable on the surface of carbon paste electrode. The novel electrochemical device provided excellent activity toward dopamine. Amperometry and differential pulse voltammetry were used for the determination of dopamine in pH 7.0 phosphate buffer with a long linear range from 0.8 to 261?µM and a detection limit of 0.2?µM. The modified electrode showed excellent repeatability, good stability, and satisfactory reproducibility, thus demonstrating potential for practical applications.     

Electrodeposition of Ag nanoparticles on graphenized pencil lead electrode as a sensitive and low-cost sensor for iodate determination

In this study, a simple, sensitive and low-cost iodate electrochemical sensor based on graphenized pencil lead electrode (GPLE) modified with Ag nanoparticles (AgNPs) was presented. The GPLE was simply prepared via electrochemical exfoliation of pencil lead electrode (PLE) by applying an optimized potential in acidic media. Afterward, silver nanoparticles were electrochemically deposited on the surface of GPLE using chronoamperometry technique. The fabricated electrode was carefully characterized by X-ray powder diffraction (XRD) and scanning electron microscopy (SEM) techniques. Electrochemical behavior and also the electrocatalytic performance of the modified electrode toward the reduction of iodate were studied in details using cyclic voltammetry (CV) and differential pulse voltammetry (DPV) techniques. The fabricated sensor responds efficiently to iodate over the concentration range of 0.05 to 75 mM with a detection limit of 0.017 mM and sensitivity of 0.26 µA µM^?1 cm^?2. Remarkably enhanced electrocatalytic performance of the modified electrode was ascribed to the synergistic effect of graphene-like nanostructures with high surface to volume ratio, excellent conductivity and also the excessive electrocatalytic behavior of silver nanoparticles. The modified electrode was successfully employed for the determination of iodate in table and sea salt samples.     

Electrochemical sensor for Baicalein using a carbon paste electrode doped with carbon nanotubes

We report on the voltammetric determination of the flavonoid Baicalein by using a carbon paste electrode that was doped with multi-walled carbon nanotubes. The resulting sensor exhibits excellent redox activity towards Baicalein due to the large surface area and good conductivity of the electrode. Cyclic voltammetry at various scan rates was used to investigate the redox properties of Baicalein. At the optimum conditions, the sensor displays a linear current response to Baicalein in the 0.02–10 μM concentration range, with a limit of detection of 4.2 n M. The method was successfully applied to the determination of Baicalein in spiked human blood serum samples and in a Chinese oral liquid.

A new potentiometric sensor based on a high-performance composite for nanomolar determination of mercury (II) in environmental samples

A new potentiometric sensor for the rapid determination of Hg²⁺ based on modified carbon paste electrode consisting of room temperature ionic liquid, 1-Butyl-3-methylimidazolium hexafluorophosphate (BMIM-PF₆), multi-walled carbon nanotubes (MWCNTs), alumina nanoparticles and a synthetic macrocyclic diamide ‘7,10,13-triaza-1-thia-4,16-dioxa-6,14-dioxo-2,3;17,18-dinaphtho-cyclooctadecane’ as an efficient ionophore was constructed. Prepared composite is an ideal paste because it has low drift of potential, high selectivity and fast response time (10 s), which leads to a more stable potential signal. The morphology and properties of electrodes surface were characterised by scanning electron microscopy (SEM) and electrochemical impedance spectroscopy. A linear dynamic range of 2.01–2.01 × 10⁷ µg L^?1 with detection limit of 1.40 µg L^?1 Hg²⁺ was obtained at pH range of 2.5 to 4.5. The prepared modified electrode shows several advantages such as simple preparation method, high stability of the composite paste, high sensitivity, long-term life time (at least 13 weeks) and remarkable potentiometric reproducibility. The modified electrode was successfully applied for the accurate determination of trace amounts of Hg ²⁺ in environmental samples.     

A new voltammetric sensor for the determination of sulfite in water and wastewater using modified-multiwall carbon nanotubes paste electrode

The electrochemical response of a modified-carbon nanotubes paste electrode with p-aminophenol was investigated as an electrochemical sensor for sulfite determination. The electrochemical behaviour of sulfite was studied at the surface of the modified electrode in aqueous media using cyclic voltammetry and square wave voltammetry. It has been found that under the optimum condition (pH 7.0) in cyclic voltammetry, the oxidation of sulfite occurs at a potential about 680?mV less positive than that of an unmodified-carbon nanotubes paste electrode. Under the optimized conditions, the electrocatalytic peak current showed linear relationship with sulfite concentration in the range of 2.0?×?10^?7–2.8?×?10^?4?mol?L^?1 with a detection limit of 9.0?×?10^?8?mol?L^?1 sulfite. The relative standard deviations for ten successive assays of 1.0 and 50.0?µmol?L^?1 sulfite were 2.5% and 2.1%, respectively. Finally, the modified electrode was examined as a selective, simple and precise new electrochemical sensor for the determination of sulfite in water and wastewater samples.     

Room-Temperature Ionic Liquid and Multi-Walled Carbon Nanotube Composite Modified Carbon-Ceramic Electrode as a Sensitive Voltammetric Sensor for Indomethacin

The electrochemical behavior of indomethacin on the surface of a carbon-ceramic electrode modified with multi-walled carbon nanotubes and an ionic liquid composite film is reported. The results show that the nano-structured film exhibited excellent enhancement effects on the electrochemical oxidation of indomethacin. The developed sensor presented a linear response to indomethacin over the concentration range from 1 to 50 µM with a detection limit of 0.26 µM. The proposed modified electrode was employed for the determination of indomethacin in biological and pharmaceutical samples using differential pulse voltammetry.     

Electrochemical determination of dipyridamole at a carbon paste electrode using cetyltrimethyl ammonium bromide as enhancing element

Electrochemical behaviors of dipyridamole (DIP) at a carbon paste electrode in the presence of cetyltrimethyl ammonium bromide (CTAB) were investigated by voltammetry, chronocoulometry and electrochemical impedance spectroscopy (EIS). The results indicated that the electrochemical responses of DIP are apparently improved by CTAB, due to the enhanced accumulation of dipyridamole at the carbon paste electrode surface. Electrochemical parameters for the oxidation of DIP were explored by chronocoulometry. Under optimal conditions, the oxidation peak current at 0.53 V was proportional to DIP concentration in the range of 0.03-12 microg mL-1, with a detection limit of 0.01 microg mL-1 for 120 s accumulation by different pulse voltammetry (DPV). This method was applied to the determination of DIP in the tablet samples. The results were satisfying compared with that obtained by standardized method of high performance liquid chromatography (HPLC).     

Design of a New Carbon Paste Electrode Modified with TiO2 Nanoparticles to Use in an Electrochemical Study of Codeine and Simultaneous Determination of Codeine and Acetaminophen in Human Plasma Serum Samples

A new electrochemical sensor was fabricated via TiO₂ nanoparticles onto a carbon paste electrode. Cyclic voltammetry (CV) and differential pulse voltammetry (DPV) studied the response of the modified electrode toward codeine. The effects of pH, modifier amount, pulse amplitude, and scan rate of potential have been examined. Using DPV, we could measure simultaneously codeine and acetaminophen in one mixture. The detection limits of 0.018 and 0.050 µmol L^?1 were achieved for codeine and acetaminophen, respectively. The electrooxidation pathway, transfer coefficient, and standard rate constant, are estimated. The proposed voltammetric sensor was successfully applied to determination of codeine and acetaminophen in human plasma serum samples.     

Synthesis and characterisation of Ag-nanoparticles immobilised on ordered mesoporous carbon as an efficient sensing platform: application to electrocatalytic determination of hydrazine

In this study, a new strategy for the preparation of a modified glassy carbon electrode (GCE) based on a novel nano-sensing layer for the electrocatalytic oxidation of hydrazine was suggested. The suggested nano-sensing layer was prepared with the immobilisation of silver nanoparticles (AgNPs) on ordered mesoporous carbon. The morphology and properties of the prepared nanocomposite on the surface of GCE were characterised by scanning electron microscopy, transmission electron microscopy, N₂ adsorption-desorption, X-ray powder diffraction and electrochemical impedance spectroscopy. The electrochemical response characteristics of the modified electrode towards the target analyte were investigated by cyclic voltammetry. Under optimal experimental conditions, the suggested modified GCE showed excellent catalytic activity towards the electro-oxidation of hydrazine (pH = 7.5) with a significant increase in anodic peak currents in comparison with the unmodified GCE. By differential pulse voltammetry and amperometric methods, the suggested sensor demonstrated wide dynamic concentration ranges of 0.08–33.8 µM and 0.01–128 µM with the detection limit (S/N = 3) of 0.027 and 0.003 µM for hydrazine, respectively. The suggested hydrazine sensor was successfully applied for the highly sensitive determination of hydrazine in different real samples with satisfactory results.     

An electrochemical sensor based on CuO nanoparticle for simultaneous determination of hydrazine and bisphenol A

In the present research, the direct electrochemical oxidation of hydrazine in the presence of bisphenol A was investigated at a copper oxide nanoparticles/ionic liquid/carbon paste electrode (CuO NPs/IL/CPE). The combination of the good conductive 1-hexyl-3-methylimidazolium hexafluorophosphate and CuO nanoparticles resulted in an electrode with attractive properties for the determination of hydrazine in the presence of bisphenol A. The linear dynamic ranges were obtained in the ranges of 0.05–150 and 0.2–175 µM with the detection limits (3sb/m) 0.03 and 0.1 µM for HY and BPA, respectively. High stability, sensitivity, selectivity and reproducibility, fast response, the ease of preparation, and surface renewal made the sensor well suitable for the determination of hydrazine in the presence of bisphenol A, which are important pollutants in the environment. Finally, this new sensor was used for the determination of HY and BPA in some water samples such as river water and wastewater.     

Direct electrocatalytic reduction of hydrogen peroxide at a glassy carbon electrode modified with polypyrrole nanowires and platinum hollow nanospheres

A nonenzymatic sensor for hydrogen peroxide has been fabricated by dispersing platinum hollow nanospheres onto polypyrrole (PPy) nanowires to form a PPy-Pt hollow sphere nanocomposite on a glassy carbon electrode. The materials were characterized by transmission electron microscopy and scanning electron microscopy. The process and the sensor were characterized by electrochemical impedance spectroscopy, cyclic voltammetry, and chrono-amperometry and revealed that the electrode has a large electroactive surface area and small resistance to electron transfer. The linear range for the determination of hydrogen peroxide is from 3.5 µM to 9.9 mM, the detection limit is 1.2 µM (S/N?=?3), and the response time is 3 s. The electrode exhibited good stability and excellent repeatability.     

The Potentialities of Using a Graphite-Silicone Rubber Composite Electrode in the Determination of Propranolol

A graphite silicone-rubber composite electrode (GSR) was used for the determination of propranolol in drug formulation. Cyclic voltammetry (CV) at the GSR presented an irreversible oxidation peak at + 0.8 V vs. SCE, in Britton Robinson (B-R) buffer pH 7.4. The quantitative determination was carried out using differential pulse voltammetry (DPV). Under optimized parameters a linear dynamic range from 5.0 to 80.6 µ mol L^?1 with a detection limit of 1.1 µ mol L^?1 was observed. A repeatability of 4.5 ± 0.1 µA (n = 10) peak current was found after 10 successive DPV voltammograms of propranolol in the same solution after surface renovations. Using the proposed electrode, propranolol was quantified in a pharmaceutical formulation with results that agreed within 95% confidence level (t-test) with those from an official method.     

Voltammetric Determination of Dye-Uptake for C. I. Acid Blue 120 Dyeing Silk

Abstract

The electrochemical behavior of Colour Index Acid Blue 120 at carbon paste electrode is studied with cyclic voltammetry and square wave voltammetry for the first time. Two irreversible oxidative peaks at 0.61 V (P_a,1) and 0.90 V(P_a,2) (both vs. SCE) are found at a scan rate of 0.1 V/s. Their electrode processes are both adsorption-controlled with two electrons and two protons participating. The peak currents of the P_a,1 are proportional to the concentration of Colour Index Acid Blue 120 in the range of 2.08–20.80 µM and 62.4–520.0 µM. The coexisting substances such as inorganic ions and fatty alcohol polyoxyethylene ether do not interfere with the determination. The method is applied to the determination of dye-uptake for Colour Index Acid Blue 120 dyeing silk. The results are in good agreement with the spectrophotometric method.     

A Study of Preparation and Performance of a Dichlorvos Electrochemical Sensor Based on Molecularly Imprinted Technique

A new dichlorvos molecularly imprinted electrochemical sensor was prepared. The sensitive membrane sensor was fabricated by electro-polymerizing on an Au electrode surface using o-aminophenol as a monomer and dichlorvos as a template. The 5 mmol/L K₃[Fe(CN)₆] containing 0.1 mol/L KCl was used as the test background solution, while cyclic voltammetry (CV) and differential pulse voltammetry (DPV) were used to study the properties of the senor. The changes of oxidation peak current versus dichlorvos concentration showed linearity in the range of 0.12–0.42 µmol/L (R ² = 0.9432) and 0.45–15 µmol/L (R ² = 0.9516) with a detection limit of 0.06 µmol/L (S/N = 3). Moreover, the selectivity and repeatability properties of the dichlorvos electrochemical sensor were examined. Results showed that the senor had excellent repeatability (RSD = 3.92%, n = 5), good selectivity to the dichlorvos in detection, and only a ten minute response time. Organophosphorus insecticides have some response signals in the detections.