Two Zinc(II) Coordination Polymers Based on Terphenyl‐2,2′,4,4′‐tetracarboxylate and Dipyridyl Ligands: Syntheses,Crystal Structures,and Luminescent Properties

Two coordination polymers, {[Zn₂(L)(bpy)] · 2H₂O}_n ( 1 ) and [Zn₂(L)(bpe)]_n ( 2 ) [H₄L = terphenyl‐2,2′,4,4′‐tetracarboxylic acid, bpy = 4,4′‐bipyridine, and bpe = 1,2‐bis(4‐pyridyl)ethane], were hydrothermally synthesized under similar conditions and characterized by elemental analysis, IR spectroscopy, TGA, and single‐crystal X‐ray diffraction analysis. Compound 1 has a 3D framework containing Zn–O–C–O–Zn 1D chains. Compound 2 exhibits a 3D framework, which features tubular channels. The channels are occupied by bpe molecules. The differences in the structures demonstrate that the auxiliary dipyridyl‐containing ligand has a significant effect on the construction of the final framework. Additionally, the fluorescent properties of the two compounds were also studied in the solid state at room temperature.     

Supramolecular Stuctures from Mononuclear,Binuclear and 2D Net of Copper(II) Complexes with 6‐Hydroxypicolinic Acid

First examples of transition metal complexes with HpicOH [Cu(picOH)₂(H₂O)₂] ( 1 ), [Cu(picO)(2,2′‐bpy)]·2H₂O ( 2 ), [Cu(picO)(4,4′‐bpy)_0.5(H₂O)]_n ( 3 ), and [Cu(picO)(bpe)_0.5(H₂O)]_n ( 4 ) (HpicOH = 6‐hydroxy‐picolinic acid; 2,2′‐bpy = 2,2′‐bipyridine; 4,4′‐bpy = 4,4′‐bipyridine; bpe = 1,2‐bis(4‐pyridyl)ethane) have been synthesized and characterized by single‐crystal X‐ray diffraction. The results show that HpicOH ligand can be in the enol or ketonic form, and adopts different coordination modes under different pH value of the reaction mixture. In complex 1 , HpicOH ligand is in the enol form and adopts a bidentate mode. While in complexes 2 – 4 , as the pH rises, HpicOH ligand becomes in the ketonic form and adopts a tridentate mode. The coordination modes in complexes 1 – 4 have not been reported before. Because of the introduction of the terminal ligands 2,2′‐bpy, complex 2 is of binuclear species; whereas in complexes 3 and 4 , picO ligands together with bridging ligands 4,4′‐bpy and bpe connect Cu^II ions to form 2D nets with (12³)₂(12)₃ topology.     

Oxygen‐Initiated Stereoselective Thermal Isomerisation of a Cyclobutane Derivative in the Solid State

Solid‐state [2+2] photochemical cycloaddition reactions have been extensively studied after the classical work of Schmidt in the 1960s. Of these, trans‐1,2‐bis(4′‐pyridyl)ethylene (bpe) is one of the well‐studied alkenes to synthesize tetrakis(4‐pyridyl)cyclobutane (tpcb). However, almost all the solid‐state [2+2] cycloaddition reactions of bpe yielded, almost exclusively, one of the four possible isomers, namely, the rctt‐tpcb (r=regio c=cis and t=trans). Here we describe a stereoselective synthesis of the tetrahedrally disposed rtct‐tpcb by the solid‐state thermal isomerization of the rctt‐isomer in atmospheric air. We propose that this isomerization occurs through a topochemical unimolecular mechanism by a radical chain pathway, initiated by molecular oxygen. This is supported by the nature of products formed in air and nitrogen, detection of a radical in ESR spectral studies, ESI‐MS crossover experiments, VT PXRD studies along with QM, MD and docking calculations. The formation of a unique isomer by thermal isomerization may be a general phenomenon to quantitatively synthesize other useful stereoisomers from the existing isomers of cyclobutane derivatives.     

Cadmium coordination polymers based on biimidazole and bibenzimidazole: Syntheses,crystal structures and fluorescent properties

Three new Cd^II complexes with two analogous ligands of 2,2′-biimidazole (H₂biim) and 2,2′-bibenzimidazole (H₂bbim), have been synthesized and characterized by elemental analyses, IR spectroscopy as well as single crystal X-ray diffraction. The results reveal that the structures of the complexes range from one-dimensional (1D) chains in [Cd(H₂biim)(N₃)₂]_n (1) to two-dimensional (2D) layer in [Cd(bbim)_0.5(Hbbim)]_n (2) and three-dimensional (3D) network in [Cd₃(biim)₂(Hbiim)(N₃)]_n (3), with various modes of these ligands, which is tuned by different polarity of solvents and pH values. The fluorescent spectra of these complexes and ligands have been also investigated in the solid state at room temperature.     

A Systematic Study of Fluorescence‐Based Detection of Nitroexplosives and Other Aromatics in the Vapor Phase by Microporous Metal–Organic Frameworks

A systematic study is conducted on four microporous metal–organic framework compounds built on similar ligands but different structures, namely [Zn₃(bpdc)₃(bpy)] ? 4 DMF ? H₂O ( 1 ), [Zn₃(bpdc)₃(2,2′dmbpy)] ? 4 DMF ? H₂O ( 2 ), [Zn₂(bpdc)₂(bpe)] ? 2 DMF ( 3 ), and [Zn(bpdc)(bpe)] ? DMF ( 4 ) (bpdc=4,4′‐biphenyldicarboxylate; bpy=4,4′‐bipyridine; 2,2′dmbpy=2,2′‐dimethyl‐4,4′bipyridine; bpe=1,2‐bis(4‐pyridyl)ethane; DMF=N,N′‐dimethylformamide) to investigate their photoluminescence properties and sensing/detection behavior upon exposure to vapors of various aromatic molecules (analytes) including nitroaromatic explosives. The results show that all four compounds are capable of detecting these molecules in the vapor phase through fluorescence quenching or enhancement. Both electrochemical measurements and theoretical calculations are performed to analyze the analyte–MOF interactions, to explain the difference in signal response by different analytes, and to understand the mechanism of fluorescence quenching or enhancement observed in these systems. Interestingly, compound 3 also shows an emission frequency shift when exposed to benzene (BZ), chlorobenzene (ClBZ), and toluene (TO), which provides an additional variable for the identification of different analytes in the same category.     

Layer and Cavity Structures of Manganese(II) Diphenate Coordination Polymers

Two novel metal‐organic coordination polymers, [Mn₂(dpa)₂(4,4′‐bipy)₂(H₂O)₂]_n ( 1 ) and [Mn(Hdpa)₂(bpe)(H₂O)₂]_n ( 2 ) (H₂dpa = diphenic acid, 4,4′‐bipy = 4,4′‐dipyridine, bpe = 1,2‐bis(4‐pyridyl)ethene), have been hydrothermally synthesized. Single crystal X‐ray diffraction analyses reveal the two‐dimensional and three‐dimensional structures for complexes 1 and 2 , respectively. In 1 , the dpa ligands link metal ions with different modes into one‐dimensional chains, and the 4,4′‐bipy terminally coordinate to the metal ions extending the chains into a layer. Whereas in 2 , the flexible bpe ligands link the structure motifs into chains, and the hydrogen bonding interactions between the chains lead to the formation of cavity structure.     

Nanoscale MnII‐Coordination Polymers for Cell Imaging and Heterogeneous Catalysis

A mixed ligand approach was exploited to synthesize a new series of Mn^II‐based coordination polymers (CPs), namely, CP1 {[Mn(μ‐dpa)(μ‐4,4′‐bp)]?MeOH}_∞, CP2 {[Mn₃(μ‐dpa)₃(2,2′‐bp)₂]}_∞, CP3 {[Mn₃(μ‐dpa)₃(1,10‐phen)₂]?2 H₂O}_∞, CP4 {[Mn(μ‐dpa)(μ‐4,4′‐bpe)_1.5]?H₂O}_∞, CP5 {[Mn₂(μ‐dpa)₂(μ‐4,4′‐bpe)₂]? DEF}_∞, and CP6 {[Mn(μ‐dpa)(μ‐4,4′‐bpe)_1.5]? DMA}_∞ (dpa=3,5‐dicarboxyphenyl azide, 2,2′‐bp=2,2′‐bipyridine, 1,10‐phen=1,10‐phenanthroline, 4,4′‐bpe=1,2‐bis(4‐pyridyl)ethylene, 4,4′‐bp=4,4′‐bipyridine, DEF=N,N‐diethylformamide, DMA=N,N‐dimethylacetamide), to develop multifunctional CPs. Various techniques, such as single‐crystal X‐ray diffraction (SXRD), FTIR spectroscopy, elemental analysis, and thermogravimetric analysis, were employed to fully characterize these CPs. The majority of the CPs displayed a four‐connected sql topology, whereas CP4 and CP6 exhibited a two‐dimensional SnS network architecture, which was further entangled in a polycatenation mode. Compound CP1 displayed an open framework structure. The CPs were scaled down to the nanoregime in a ball mill for cell imaging studies. Whereas CP2 and CP4 were employed for cell imaging with RAW264.7 cells, CP1 was exploited for both cell imaging and heterogeneous catalysis in a cyanosilylation reaction.     

Assembly of Supramolecular Networks with the Inclusion of Water Chains,Cyclic Hepta and Octa Water Clusters

Three new supramolecular compounds were synthesized and characterized with the formula of [Zn₄(picO)₄(phen)₄]·11.25H₂O ( 1 ), [Zn₄(picO)₄(2,2′‐bpy)₄(H₂O)₄]·12H₂O ( 2 ), and [Zn₃(picO)₃(bpe)₅(H₂O)₃]_n·8.5nH₂O ( 3 ) (H₂picO = 6‐hydroxypicolinic acid; phen = 1,10‐phenanthroline; 2,2′‐bpy = 2,2′‐bipyridine; bpe = 1,2‐bis(4‐pyridyl)ethane). For complexes 1 and 2 , picO ligands adopt tridentate, tetradentate and bidentate coordination modes to link zinc(II) ions into dimers, which are extended into 3D supramolecular structures through hydrogen bonds. Water chains with cyclic page‐like octamer and boat‐like heptamer water clusters are included, respectively. Complex 3 is of a 2D brick‐wall structure. Triple interpenetration occurs, and there are still cyclic chair‐like octamer water clusters in the channels. The fluorescent properties of complexes 1‐3 have also been investigated.     

Synthesis and Magnetic Properties of Two New Cobalt Complexes Constructed by Semirigid V‐shaped 5‐(4‐Carboxyphenoxy)‐pyridine‐2‐carboxylic Acid

Two cobalt complexes, [Co₃(L)₂(CH₃OH)₂(μ₃‐OH)₂] ( 1 ) and [Co(L)(bpe)_0.5] · H₂O ( 2 ) [H₂L = 5‐(4‐carboxyphenoxy)‐pyridine‐2‐carboxylic acid; bpe = 1, 2‐bis(4‐pyridyl)ethylene] were synthesized and fully characterized by elemental analyses, IR spectroscopy, single‐crystal X‐ray diffraction, thermogravimetric analysis (TGA), and magnetic analysis. Complex 1 has a two‐dimensional (2D) structure with puckered Co–O–Co chains, and 2 displays a three‐dimensional (3D) network containing one‐dimensional rectangular channels with dimensions of 9.24 × 13.84 Å. In complex 1 , variable‐temperature magnetic susceptibility measurements indicate antiferromagnetic interactions between cobalt magnetic centers.     

Construction of tetranuclear macrocycles through C-H activation and structural transformation induced by [2+2] photocycloaddition reaction

A series of binuclear complexes [{Cp*Ir(OOCCH₂COO)}₂(pyrazine)] ( 1 b ), [{Cp*Ir(OOCCH₂COO)}₂(bpy)] ( 2 b ; bpy=4,4′‐bipyridine), [{Cp*Ir(OOCCH₂COO)}₂(bpe)] ( 3 b ; bpe=trans‐1,2‐bis(4‐pyridyl)ethylene) and tetranuclear metallamacrocycles [{(Cp*Ir)₂(OOC‐C?C‐COO)(pyrazine)}₂] ( 1 c ), [{(Cp*Ir)₂(OOC‐C?C‐COO)(bpy)}₂] ( 2 c ), [{(Cp*Ir)₂(OOC‐C?C‐COO)(bpe)}₂] ( 3 c ), and [{(Cp*Ir)₂[OOC(H₃C₆)‐N?N‐(C₆H₃)COO](pyrazine)}₂] ( 1 d ), [{(Cp*Ir)₂[OOC(H₃C₆)‐N?N‐(C₆H₃)COO](bpy)}₂] ( 2 d ), [{(Cp*Ir)₂[OOC(H₃C₆)‐N?N‐(C₆H₃)COO](bpe)}₂] ( 3 d ) were formed by reactions of 1 a – 3 a {[(Cp*Ir)₂(pyrazine)Cl₂] ( 1 a ), [(Cp*Ir)₂(bpy)Cl₂] ( 2 a ), and [(Cp*Ir)₂(bpe)Cl₂] ( 3 a )} with malonic acid, fumaric acid, or H₂ADB (azobenzene‐4,4′‐chcarboxylic acid), respectively, under mild conditions. The metallamacrocycles were directly self‐assembled by activation of C? H bonds from dicarboxylic acids. Interestingly, after exposure to UV/Vis light, 3 c was converted to [2+2] cycloaddition complex 4 . The molecular structures of 2 b , 1 c , 1 d , and 4 were characterized by single‐crystal x‐ray crystallography. Nanosized tubular channels, which may play important roles for their stability, were also observed in 1 c , 1 d , and 4 . All complexes were well characterized by ¹H NMR and IR spectroscopy, as well as elemental analysis.     

Solid‐State Structural Transformations and Photoreactivity of 1D‐Ladder Coordination Polymers of PbII

An attempt has been made to design double‐stranded ladder‐like coordination polymers (CPs) of hemidirected Pb^II. Four CPs, [Pb(μ‐bpe)(O₂C‐C₆H₅)₂] ? 2H₂O ( 1 ), [Pb₂(μ‐bpe)₂(μ‐O₂C‐C₆H₅)₂(O₂C‐C₆H₅)₂] ( 2 ), [Pb₂(μ‐bpe)₂(μ‐O₂C‐p‐Tol)₂(O₂C‐p‐Tol)₂] ? 1.5 H₂O ( 3 ) and [Pb₂(μ‐bpe)₂(μ‐O₂C‐m‐Tol)₂(O₂C‐m‐Tol)₂] ( 4 ) (bpe=1,2‐bis(4′‐pyridyl)ethylene), have been synthesised and investigated for their solid‐state photoreactivity. CPs 2 – 4 , having a parallel orientation of bpe molecules in their ladder structures and being bridged by carboxylates, were found to be photoreactive, whereas CP 1 is a linear one‐dimensional (1D) CP with guest water molecules aggregating to form a hydrogen‐bonded 1D structure. The linear strands of 1 were found to pair up upon eliminating lattice water molecules by heating, which led to the solid‐state structural transformation of photostable linear 1D CP 1 into photoreactive ladder CP 2 . In the construction of the double‐stranded ladder‐like structures, the parallel alignment of C?C bonds in 2 – 4 is dictated by the chelating and μ₂‐η²:η¹ bridging modes of the benzoate and toluate ligands. The role of solvents in the formation of such double‐stranded ladder‐like structures has also been investigated. A single‐crystal‐to‐single‐crystal transformation occurred when 4 was irradiated under UV light to form [Pb₂(rctt‐tpcb)(μ‐O₂C‐m‐Tol)₂(O₂C‐m‐Tol)₂] ( 5 ).     

Two Keggin Templated Supramolecular Compounds by Exerting the Chelate and Linking Dual Roles of the Ligand 2, 2′‐Biimidazole

Two new Keggin templated supramolecular compounds, [Zn₂(H₂biim)₅(SiM₁₂O₄₀)] · 4H₂O [M = W ( 1 ), Mo ( 2 )] (H₂biim = 2, 2′‐biimidazole), were synthesized under hydrothermal conditions by using the ligand 2, 2′‐biimidazole. They were characterized by single‐crystal X‐ray diffraction, elemental analyses, IR and photoluminescence spectroscopy as well as cyclic voltammetry. The two isostructural compounds are constructed by two discrete supramolecular moieties: the inorganic chains consist of Keggin anions and metal‐organic chains constructed by [Zn₂(H₂biim)₅]⁴⁺ subunits. In the dinuclear [Zn₂(H₂biim)₅]⁴⁺ subunit, the H₂biim ligands exhibit a dual role, chelating and linking. The metal‐organic chains further construct a 3D supramolecular framework with channels, in which the Keggin‐based inorganic chains are accommodated. The electrochemical behaviors of compounds 1 and 2 bulk‐modified carbon paste electrodes ( 1 ‐CPE, 2 ‐CPE) were studied.     

Ruthenium(II) Complexes with Three Different Diimine Ligands

The synthesis of tri-heteroleptic complex of Ru(II) with diimine ligands is describe. Ten compounds [Ru(R₂bpy) (biq) (L)][PF₆]₂ (R = H, CH₃); L = 2,2′-bipyridine (bpy), 4,4′-dimethyl-2,2′-bipyridine (Me₂bpy), 2,2′-bipyrimidine (bpm), 2,2′-biisoquinoline (biiq), 1,10-phenanthroline (phen), dipyrido[3,2-c:2′,3′-e]pyridazine (taphen), 2,2′-biquinoline (biq), 6,7-dihydrodipyrido[2,3-b:3,2-j][1,10]-phenanthroline (dinapy), 2-(2[pyridyl)quinoline (pq), 1-(2-pyrimidyl)pyrazole] (pzpm), 2,2′-biimidazole (H₂biim) are characterized by elemental analysis, electronic and ¹H-NMR spectroscopy. The relative photosustitution rates of biq in MeCN are given at three temperatures.     

Synthesis,Structural Characterization and Thermal Stability of [Mn(3‐bpd)2(NCS)2(H2O)2]·2H2O (1) and {[Mn(bpe)(NCS)2(H2O)2]·(3‐bpd)·(bpe)·H2O}n (2) from One‐Pot Crystallization

Two supramolecular architectures, [Mn(3‐bpd)₂(NCS)₂(H₂O)₂]·2H₂O ( 1 ) and {[Mn(bpe)(NCS)₂(H₂O)₂]·(3‐bpd)·(bpe)·H₂O}_n ( 2 ) [bpe = 1,2‐bis(4‐pyridyl)ethylene and 3‐bpd = 1,4‐bis(3‐pyridyl)‐2,3‐diaza‐1,3‐butadiene] have been synthesized and characterized by spectroscopic, elemental and single crystal X‐ray diffraction analyses. Compound 1 crystallizes in the monoclinic system, space group P2₁/c, with chemical formula C₂₆H₂₈Mn N₁₀O₄S₂, a = 9.1360(6), b = 9.7490(6), c = 17.776(1) Å, β = 93.212(1)°, and Z = 2 while compound 2 crystallizes in the orthorhombic system, space group P2₁2₁2₁, with chemical formula C₃₈H₃₆Mn₁N₁₀O₃S₂, a = 14.1902(6), b = 15.4569(7), c = 18.2838(8) Å, α = β = γ = 90°, and Z = 4. Structural determination reveals that the coordination geometry at Mn(II) in compound 1 or 2 is a distorted octahedral which consists of two nitrogen donors of two NCS^?ligands, two oxygen donors of two water molecules, and two nitrogen donors of two 3‐bpd ligands for 1 and two dpe ligands for 2 , respectively. The two 3‐bpd ligands in 1 adopt a monodentate binding mode and the dpe in 2 adopts a bismonodentate bridging mode to connect the Mn(II) ions forming a 1D chain‐like coordination polymer. Both the π‐π stacking interactions between the coordinated and the free pyridyl‐based ligands and intermolecular hydrogen bonds among the coordinated and the crystallized water molecules and the free pyridyl‐based ligands play an important role in construction of these 3D supramolecular architectures.     

Hydrothermal Syntheses and Characterizations of Three ZnII Coordination Polymers Tuned by pH Value and Base

Three new Zn^II coordination polymers, [Zn(bpe)(HL)₂(H₂O)]_n ( 1 ), {[Zn(bpe)(L)] · H₂O}_n ( 2 ), and [Zn₂Ca(bpe)(HL)₂(L)₂]_n ( 3 ) [H₂L = 5‐methoxyisophthalic acid and bpe = 1,2‐dis(4‐pyridyl) ethylene], were hydrothermally synthesized under different pH values and bases. Their structures were determined by single‐crystal X‐ray diffraction and further characterized by elemental analyses and IR spectroscopy. Polymer 1 is formed at pH = 4 and has a 1D chain structure. These 1D chains are linked by hydrogen bonds to afford a 1D double chain and further to form a threefold interpenetrating network. At pH = 7, a 2D layer structure of 2 with sql topology is formed. By using calcium hydroxide as base for the synthesis of 3 , a 3D network with pcu topology is obtained. These structural differences among 1 – 3 indicate that pH value and the identity of the base play important role in defining the overall structures of metal‐organic frameworks. In addition, the fluorescent properties of 1 – 3 are discussed.     

Synthesis,Crystal Structures,and Luminescent Properties of Two Complexes based on 5‐tert‐Butylisophthalic Acid and 1, 2‐Bis(4‐pyridyl) Ethane

Abstract. Two coordination polymers, namely, [Zn(bpe)_0.5(Htbip)(tbip)_0.5] · H₂O ( 1 ) and [Cd(bpe)_0.5(tbip)] ( 2 ) [H₂tbip = 5‐tert‐butylisophthalic acid and bpe = 1, 2‐ bis(4‐pyridyl) ethane] were synthesized through hydrothermal reactions. Single‐crystal X‐ray diffraction analysis reveals that complex 1 presents a three‐dimensional (3D) six‐connected uninodal structure with the type of topology of svi‐x/I4/mcm → Ibam, whereas complex 2 holds a 2D 4⁴‐sql layer structure. Moreover, the photoluminescent properties of the complexes at room temperature were investigated.     

Structural Optimization of Interpenetrated Pillared‐Layer Coordination Polymers for Ethylene/Ethane Separation

With the goal of achieving effective ethylene/ethane separation, we evaluated the gas sorption properties of four pillared‐layer‐type porous coordination polymers with double interpenetration, [Zn₂(tp)₂(bpy)]_n ( 1 ), [Zn₂(fm)₂(bpe)]_n ( 2 ), [Zn₂(fm)₂(bpa)]_n ( 3 ), and [Zn₂(fm)₂(bpy)]_n ( 4 ) (tp=terephthalate, bpy=4,4′‐bipyridyl, fm=fumarate, bpe=1,2‐di(4‐pyridyl)ethylene and bpa=1,2‐di(4‐pyridyl)ethane). It was found that 4 , which contains the narrowest pores of all of these compounds, exhibited ethylene‐selective sorption profiles. The ethylene selectivity of 4 was estimated to be 4.6 at 298 K based on breakthrough experiments using ethylene/ethane gas mixtures. In addition, 4 exhibited a good regeneration ability compared with a conventional porous material.     

An unusual polycatenating network self‐assembled by the 2D → 2D parallel → 3D parallel interpenetration of coordinative and hydrogen‐bonded (6,3) motifs

In the title coordination compound, catena‐poly[[[bis[diaquacadmium(II)]‐μ₂‐trans‐1,2‐bis(4‐pyridyl)ethene]bis{μ₂‐2,2′‐[(5‐carboxymethoxy‐m‐phenylene)dioxy]diacetato}] trans‐1,2‐bis(4‐pyridyl)ethene solvate dihydrate], {[Cd₂(C₁₂H₁₀O₉)₂(C₁₂H₁₀N₂)(H₂O)₄]·C₁₂H₁₀N₂·2H₂O}_n, (I), each Cd^II centre adopts a pentagonal–bipyramidal coordination geometry. The incompletely deprotonated 2,2′‐[(5‐carboxymethoxy‐m‐phenylene)dioxy]diacetate (TCMB) ligands and trans‐1,2‐bis(4‐pyridyl)ethene (bpe) ligands both act as bidentate bridges, linking the Cd^II centres into one‐dimensional ladders, which are connected into an undulating two‐dimensional (6,3) layer through O—H...N hydrogen bonds between the carboxylate groups of the TCMB ligands and the N atoms of the uncoordinated bpe ligands. Each undulating layer polycatenates two other identical layers, exhibiting the unusual combination of both 2D → 2D parallel and 2D → 3D parallel interpenetration (2D and 3D are two‐ and three‐dimensional, respectively).     

Design and syntheses of two threefold interpenetrating 2-D networks

Two new interpenetrating networks, [Ni(2,2′-bpy)(5-npa)(bpe)_0.5(H₂O)] _n (1) and [Ni(2,2′-bpy)(5-npa)(bpa)_0.5(H₂O)] _n (2) (2,2′-bpy?=?2,2′-bipyridine, 5-npa?=?5-nitroisophthalato, bpe?=?1,2-bis(4-pyridyl)ethylene, bpa?=?1,2-bis(4-pyridyl)ethane), have been synthesized and characterized by elemental analyses, IR spectroscopy, thermogravimetric analyses, X-ray powder diffraction, and single-crystal X-ray diffraction. Complexes 1 and 2 have similar structures and show a threefold interpenetrating topology constructed by three 2-D wave-like networks. Secondary building unit (SBU), [Ni(2,2′-bpy)(5-npa)(H₂O)] _n , was used as starting material of the multistep reaction. Replacing one coordination bond of chelating carboxyl group of SBUs by bpe and bpa afford the two threefold interpenetrating complexes.     

Syntheses,Structures, and Luminescence of Metal(II) Coordination Polymers based on Flexible 1,1′‐(1,4‐Butanediyl)bis(imidazole) and Tetrachlorobenzene‐1,4‐dicarboxylate Ligands

The coordination polymers, {[Co(bbim)₂(H₂O)₂](tcbdc) · 2H₂O}_n ( 1 ), {[Ni(tcbdc)(bbim)(H₂O)₂] · 2DMF}_n ( 2 ), and {[Cu₂(tcbdc)₂(bbim)₄] · 4H₂O}_n ( 3 ) [bbim = 1,1′‐(1,4‐butanediyl)bis(imidazole) and tcbdc^2– = tetrachlorobenzene‐1,4‐dicarboxylate] were synthesized and characterized by IR spectroscopy, elemental analysis, thermogravimetric analysis, luminescence, and single‐crystal X‐ray diffraction analysis. Complex 1 has a double‐stranded chain structure through doubly bridged [Co(bbim)₂] units. Complex 2 exhibits two‐dimensional square grid, whereas complex 3 has a three‐dimensional porous network structure with an unprecedented 4⁴ · 6¹¹ topological structure through interpenetrating square grid. The water molecules in complex 3 occupy the vacancy through three kinds of hydrogen bond interactions. Upon excitation at 370 nm, complexes 1 – 3 present solid‐state luminescence at room temperature.