Intercalation Compounds as Inner Reference Electrodes for Reproducible and Robust Solid‐Contact Ion‐Selective Electrodes

With billions of assays performed every year, ion‐selective electrodes (ISEs) provide a simple and fast technique for clinical analysis of blood electrolytes. The development of cheap, miniaturized solid‐contact (SC‐)ISEs for integrated systems, however, remains a difficult balancing act between size, robustness, and reproducibility, because the defined interface potentials between the ion‐selective membrane and the inner reference electrode (iRE) are often compromised. We demonstrate that target cation‐sensitive intercalation compounds, such as partially charged lithium iron phosphate (LFP), can be applied as iREs of the quasi‐first kind for ISEs. The symmetrical response of the interface potentials towards target cations ultimately results in ISEs with high robustness towards the inner filling (ca. 5 mV dec^?1 conc.) as well as robust and miniaturized SC‐ISEs. They have a predictable and stable potential derived from the LiFePO₄/FePO₄ redox couple (97.0±1.5 mV after 42 days).     

Investigation of Protein Binding With All Solid‐State Ion‐Selective Electrodes

A potentiometric sensor for studying charge based adsorption of proteins was created using a single‐piece polyaniline‐PVC ion‐selective electrode (ISE). Three different ISEs, two for Na⁺ and one for Cl^? ion determination, were studied. The Na⁺‐ISEs consisted of a neutral calixarene‐based ionophore and one with a charged carrier dinonylnapthalenesulfonic acid (DNNSA) whereas for the Cl^? ISE, an anion exchanger tridodecylmethylammonium chloride (TDDMA⁺Cl^?), was used. The Na⁺ ISE with DNNSA as the charged carrier was successfully able to discriminate the binding of two different proteins (bovine serum albumin and lysozyme) based on their intrinsic charge.     

Development of Polymeric Resin Ion‐exchanger Based Chloride Ion‐selective Electrode for Monitoring Chloride Ion in Environmental Water

A chloride ion‐selective electrode (ISE) membrane was developed by using a copolymeric ion‐exchanger resin (trimethyl ethenyl quaternary ammonium chloride polystyrene‐divinylbenzene copolymer resin, TMEQAC PSDVB), the ionophore ({μ‐[4,5‐Dimethyl‐3,6‐bis(dodecyloxy)‐1,2‐phenylene]}bis(mercury chloride), ETH9033), the plasticizer (bis(2‐ethylhexyl) sebacate, DOS), and the membrane substrate (polyvinylchloride, PVC). At 25 °C, the electrode exhibited an ideal Nernstian response of 59.2 mV/decade with the linear calibration concentration range from 1.0 × 10^?4‐1.0 × 10^?2 M (r² = 0.9930). The limit of detection was 2.45 ppm (6.9 × 10^?2 mM) and the measurement response time was less than 10 seconds. The working temperature range of electrode was 10‐45 °C. The working pH range for chloride ion measurement was 2.0‐11.0. Among the various anions examined in this work, only I^?, SCN^?, and MnO₄^? ions show significant interference to the electrode measurement. The chloride ISE can be used at least 72 days. The determination of chloride ion content in three kinds of environmental water sample with the electrode method was accurate (92‐95%) and precise (RSD < 4.4%) and did not show significance difference from the high‐performance liquid chromatography method.     

Ion‐selective Electrodes with 3D Nanostructured Conducting Polymer Solid Contact

Until now both ion‐to‐electron transducers as well as large surface area nanostructured conducting materials were successfully used as solid contacts for polymer‐based ion‐selective electrodes. We were interested to explore the combination of these two approaches by fabricating ordered electrically conducting polymer (ECP) nanostructures using 3D nanosphere lithography and electrosynthesis to provide a high surface area and capacitive interface for solid contact ion‐selective electrodes (SC‐ISEs). For these studies we used poly(3,4‐ethylenedioxythiophene)/poly(styrenesulfonate) (PEDOT(PSS)) films with 750 nm diameter interconnected pores as the intermediate layer between a glassy carbon electrode and a Ag⁺ ‐selective polymeric membrane. We also investigated the feasibility of loading the voids created in the polymer film with a lipophilic redox mediator (1,1’‐dimethylferrocene) to provide the respective ISEs with well‐defined/controllable E⁰ values. These expectations were fulfilled as the standard deviation of E⁰ values were reduced with almost an order of magnitude for 3D nanostructured SC‐ISEs filled with the redox mediator as compared to their redox mediator‐free analogs. The detrimental effect of the redox mediator extraction into the plasticized PVC‐based ion‐selective membrane (ISM) was efficiently suppressed by replacing the PVC‐based ISMs with a low diffusivity silicone rubber matrix.     

Semifluorinated Polymers as Ion‐selective Electrode Membrane Matrixes

Most commercially available fluorous polymers are ill suited for the fabrication of ion‐selective electrode (ISE) membranes. Therefore, we synthesized semifluorinated polymers for this purpose. Ionophore‐free ion‐exchanger electrodes made with these polymers show a selectivity range (≈14 orders of magnitude) that is nearly as wide as found previously for liquid fluorous ion‐exchanger electrodes. These polymers were also used to construct ISE membranes doped with fluorophilic silver ionophores. While the resulting ISEs were somewhat less selective than their fluorous counterparts, the semifluorinated polymers offer the advantage that they can be doped both with fluorophilic ionophores and traditional lipophilic ionophores, such as the silver ionophore Cu(II)‐I (o ‐xylylenebis[N,N ‐diisobutyldithiocarbamate]). We also cross‐linked these polymers, producing very durable membranes that retained broad selectivity ranges. K⁺ ISEs made with the cross‐linked semifluorinated polymer and the ionophore valinomycin showed selectivities similar to those of PVC membrane ISEs but with a superior thermal stability, the majority of the electrodes still giving a theoretical (Nernstian) response after exposure to a boiling aqueous solution for 10 h.     

Bifunctional Ion‐Selective Electrode Based on C60‐Cryptand 22 for Silver and Iodine Ions

Fullerence C60‐cryptand 22 was prepared and successfully applied as the electric carrier in the PVC electrode membrane of a bifunctional ion‐selective electrode for cations, e.g., Ag⁺ ions as well as anions, e.g., I^? ions. The bifunctional ion‐selective electrode based on C60‐cryptand 22 can be applied as a Silver (Ag⁺) ion selective electrode with an internal electrode solution of 10^?3 M AgNO₃ in water (pH = 6.3), or as an Iodide (I^?) ion selective electrode with an acidic internal electrode solution of 10^?4 M KI_(aq) (pH = 2) in which the cryptand 22 is protonated, and the C60‐cryptand 22 is changed to C60‐Cryptand22–H⁺ and becomes an anionic electro‐carrier to absorb the I^? ion. The Ag⁺ ion selective electrode based on C60‐cryptand 22 gave a linear response with a near‐Nernstian slope (59.5 mV decade^?1) within the concentration range 10^?1‐10^?3 M Ag⁺_(aq). The Ag⁺ ion electrode exhibited comparatively good selectivity for silver ions, over other transition‐metal ions, alkali and alkaline earth metal ions. The Ag⁺ ion selective electrode with good stability and reproducibility was successfully used for the titration of Ag⁺_(aq) with Cl^? ions. The Iodide (I^?) Ion selective electrode based on protonated C60–cryptand22‐H⁺ also showed a linear response with a nearly Nernstian slope (58.5 mV decade^?1) within 10^?1 ‐ 10^?3 M I^? _(aq) and exhibited good selectivity for I^? ions and had small selectivity coefficients (10^?2–10^?3) for most of other anions, e.g., F^? , OH^?, CH₃COO^?, SO₄^2?, CO₃^2?, CrO₄^2?, Cr₂O₇^2? and PO₄^3? ions.     

Synthesis of a Tweezer—like Bis（Phenylthiapropoxy）calix[4]—arene as a Cation／π Enhanced Sensor for Ion—Selective Electrodes

Two novel 25,27-dihydroxy-26,28-bis(3-phenylthiapropxy)-calix[4]arene(3) and 25,27-dihydroxy-26,28-bis(3-phenylthiapropoxy)-5,11,17,23-tetra-tert-butylcalix[4] arene (4) were synthesized for the evaluation of their ion-selectivity in ion-selective electrodes(ISEs).ISEs based on 3 and 4 as neutral ionophores were prepared,and their selectivity coefficients for Ag^ (lg KAg,M^pot)were investigated against other alkali metal,alkaline-earth metal,aluminum,thallium(Ⅰ）,Lead and some transition metal ions using the separate solution method (SSM).These ISEs showed excellent Ag^ seletivity over most of the interfering cations examined,except for Hg^2 and Fe^2 having relative smaller interference(lg KAg,M^pot≤-2.1).     

Characteristics of Lariat Crown Ether‐Copper (II) Ion‐Selective Electrodes

An ion‐selective electrode using ionophore 2′‐picolyl sym‐dibenzo‐16‐crown‐5 ether as membrane carrier, sodium tetraphenylborate (NaTPB) as an anion excluder, and 2‐nitrophenyl‐octyl ether (NOPE) as the plasticing solvent mediator has been successfully developed. This electrode exhibits al in ear response with a slope of 42 mV/decade in concentration ranging from 10^?5 molL^?1 to 10^?1 molL^?1, slightly larger than the 30 mV expected from the one‐to‐one complex. The reason for the super‐Nernstain slope is the partial dimmer formation in side the membrane of the electrode, because this dimmer [Cu(C₂₅H₂₇NO₆)₂(H₂O)₂] 2ClO₄, has been isolated and confirmed by single crystal X‐ray crystallography. The detection limit for the cop per (II) ion was estimated to be 1 × 10^?6 molL^?1. Electrades composed of other plasticing solvent mediators such as tris(2‐ethylhexyl) phosphate (TOP), bis (2‐ethylhexyl) sebacate (DOS) and dibutyl phthalate (DBP) were also investigated. Stability constants (logKs) of the two to one and the one to one 2‐picolylsym‐dibenzo‐16‐crown‐5 ether‐Cu (II) complexes have been determined by potentiometric titration in methanol.     

Development and Optimization of an Ion‐selective Electrode for Serotonin Detection

Our studies are focused on the development of novel potentiometric sensors for the quantification of the neurotransmitter serotonin. Therefore, ion‐selective electrodes based on plasticized PVC membranes are applied. The electroactive part of the membrane consists of an ion pair complex formed between the protonated analyte and a carborane anion [Co(1,2‐C₂B₉H₁₁)₂]⁻. The analytical performance of the electrode was studied regarding sensitivity, concentration range, limit of detection and potential stability. The ion‐selective electrodes were optimized with respect to the material of the transducing element, as well as the membrane thickness and its composition. Stable, all solid state ISEs could be developed, using the non‐polar plasticizer NPOE and a graphite rod with high surface area as transducing element. We thus achieved a near Nernstian response over three decades of concentration (2.25⋅10^‐5‐1.00⋅10^‐2 M) and a limit of detection in the μ‐molar range for the optimized electrodes. The electrodes could successfully be miniaturized using carbon based screen printed electrodes.     

Molecular‐Recognition‐Assisted pKa Shifts and Metal‐Ion‐Induced Fluorescence Regeneration in p‐Sulfonatocalix[6]arene‐Encapsulated Acridine

The host–guest interactions of cationic (AcH⁺) and neutral (Ac) forms of the dye acridine with the macrocyclic host p‐sulfonatocalix[6]arene (SCX6) were investigated by using ground‐state absorption, steady‐state and time‐resolved fluorescence, and NMR measurements. The cationic form undergoes significant complexation with SCX6 (K_eq=2.5×10⁴ M ^?1), causing a sharp decrease in the fluorescence intensity and severe quenching in the excited‐state lifetime of the dye. The strong binding of the AcH⁺ form of the dye with SCX6 is attributed to ion–ion interactions involving the sulfonato groups (SO₃^?) of SCX6 and the positively charged AcH⁺ at pH of approximately 4.3. Whereas, the neutral Ac form of the dye undergoes weak complexation with SCX6 (K_eq=0.9×10³ M ^?1) and the binding constant is lowered by one order of magnitude compared with that of the SCX6–AcH⁺ system. The strong affinity of SCX6 to the protonated form leads to a large upward pK_a shift (≈2 units) in the dye. In contrast, strong emission quenching upon SCX6 interaction and the regeneration of fluorescence intensity of the dye in the presence of Gd³⁺ through competitive binding have also been demonstrated.     

Quantification of Ion‐Pairing Effects on the Nucleophilic Reactivities of Benzoyl‐ and Phenyl‐Substituted Carbanions in Dimethylsulfoxide

Second‐order rate constants for the reactions of acceptor‐substituted phenacyl (PhCO?CH^??Acc) and benzyl anions (Ph?CH^??Acc) with diarylcarbenium ions and quinone methides (reference electrophiles) have been determined in dimethylsulfoxide (DMSO) solution at 20 °C. By studying the kinetics in the presence of variable concentrations of potassium, sodium and lithium salts (up to 10^?2 mol L^?1), the influence of ion‐pairing on the reaction rates was examined. As the concentration of K⁺ did not have any influence on the rate constants at carbanion concentrations in the range of 10^?4–10^?3 mol L^?1, the acquired rate constants could be assigned to the reactivities of the free carbanions. The counter ion effects increase, however, in the series K⁺<Na⁺<Li⁺, and the sensitivity of the carbanion reactivities toward variation of the counter ion strongly depends on the structure of the carbanions. The reactivity parameters N and s_N of the free carbanions were derived from the linear plots of log k₂ against the electrophilicity parameters E of the reference electrophiles, according to the linear‐free energy relationship log k₂(20 °C)=s_N(N+E). These reactivity parameters can be used to predict absolute rate constants for the reactions of these carbanions with other electrophiles of known E parameters.     

Responses of Metalloporphyrin‐Based Ion‐Selective Electrodes to pH

The ISEs based on [M(tpp)Cl] (M: Al, Ga, In, Mn, Fe; H₂tpp: tetraphenylporphin) had pH responses across their respective pH ranges, which had some correlation with the pH ranges of the two‐phase hydrolysis. Such pH responses are ascribed to the phase boundary potentials relating to the acid‐base pairs of [M(tpp)(H₂O)]⁺ and [M(tpp)(OH)] and/or [M₂(tpp)₂O]. The potential responses of the In and Fe complexes had the upper limitation to pH of 90 % hydrolysis, whereas those of the Al and Ga complexes had the extension to at least pH 12, indicating stable existence of [M(tpp)(H₂O)]⁺ even in contact with strongly alkaline solutions.     

Ion‐Selective Electrodes Based on Hydrophilic Ionophore‐Modified Nanopores

We report the synthesis and analytical application of the first Cu²⁺‐selective synthetic ion channel based on peptide‐modified gold nanopores. A Cu²⁺‐binding peptide motif (Gly‐Gly‐His) along with two additional functional thiol derivatives inferring cation‐permselectivity and hydrophobicity was self‐assembled on the surface of gold nanoporous membranes comprising of about 5 nm diameter pores. These membranes were used to construct ion‐selective electrodes (ISEs) with extraordinary Cu²⁺ selectivities, approaching six orders of magnitude over certain ions. Since all constituents are immobilized to a supporting nanoporous membrane, their leaching, that is a ubiquitous problem of conventional ionophore‐based ISEs was effectively suppressed.     

Regulating Fast Anionic Redox for High‐Voltage Aqueous Hydrogen‐Ion‐based Energy Storage

The ionic conductivity and small size of the hydrogen ion make it an ideal charge carrier for hydrogen‐ion energy storage (HES); however, high‐voltage two‐electrode configurations are difficult to construct as the result of the lack of efficient cathodic energy storage. Herein, the high potential fast anionic redox at the cathode of reduced graphene oxide (rGO) was applied by introducing redox additive electrolytes. By coupling the storing hydrogen ion in the Ti₃C₂T_x at the anode, a HES with a voltage of 1.8 V and a plateau voltage at 1.2 V was constructed. Compared with 2.2 Wh kg^?1 for the low‐voltage Ti₃C₂T_x//Ti₃C₂T_x, the specific energy of asymmetric rGO//Ti₃C₂T_x reaches 34.4 Wh kg^?1. Furthermore, it possesses an energy density of 23.7 Wh kg^?1 at high power density of 22.5 kW kg^?1. Thus, this study provides a novel guideline for constructing high‐voltage fast HES full cells.     

Ion‐Pair Complexation with a Cavitand Receptor

The capability of resorcinarenes to bind anions within the alkyl feet at the lower rim has been exploited as the starting point for developing a new cavitand able to engulf contact ion pairs of primary ammonium salts in chlorinated solvents with association constants (K_ass) in the range of 10³–10⁴ M ^?1. Methylene bridges were introduced into the upper rim to freeze the resorcinarene in the cone conformation with the four H_down protons converging in the lower pocket, thereby maximizing the CH–anion interactions responsible for the anion binding. Four additional phosphate moieties were introduced into the lower rim in close proximity to the anionic site to provide hydrogen‐bonding‐acceptor P?O groups and promote cation complexation at the bottom of the cavitand. The binding ability of the synthesized ligands was analyzed by ¹H NMR spectroscopy and, when possible, by isothermal titration calorimetry (ITC); the data were in agreement when complementary techniques were used.     

A Disposable Planar Paper‐Based Potentiometric Ion‐Sensing Platform

Ion‐selective electrodes (ISEs) are widely used tools for fast and accurate ion sensing. Herein their design is simplified by embedding a potentiometric cell into paper, complete with an ISE, a reference electrode, and a paper‐based microfluidic sample zone that offer the full function of a conventional ISE setup. The disposable planar paper‐based ion‐sensing platform is suitable for low‐cost point‐of‐care and in‐field testing applications. The design is symmetrical and each interfacial potential within the cell is well defined and reproducible, so that the response of the device can be theoretically predicted. For a demonstration of clinical applications, paper‐based Cl^? and K⁺ sensors are fabricated with highly reproducible and linear responses towards different concentrations of analyte ions in aqueous and biological samples. The single‐use devices can be fabricated by a scalable method, do not need any pretreatment prior to use, and only require a sample volume of 20 μL.     

Copper(II) Ion‐Selective Electrodes Based on Dithiosalicylic and Thiosalicylic Acids

Potentiometric carbon paste electrodes for copper(II) based on dithiosalicylic and thiosalicylic acids are described. The sensor based on dithiosalicylic acid (DTS) exhibits a linear response with a nearly Nernstian slope of 27.7 mV per decade, whereas the electrode based on thiosalicylic acid (TS) shows a super‐Nernstian slope. The limits of detection for the DTS sensor and the TS sensor are 10^?7.9and 10^?6.3 M for copper(II) activity, respectively. Selectivity coefficients are tabulated, and the influence of the pH on the response of these ISEs is studied. The DTS electrode is successfully used for potentiometric titration of humic acids with copper in order to get more information about complexing properties of these acids.     

Novel Cesium‐Selective Electrodes Based on Lipophilic 1,3‐Bisbridged Cofacial‐calix[6]crowns

Five bisbridged calix[6]crowns have been investigated as Cs⁺ ionophore in PVC membrane electrodes. As ionophores, three 1,3‐bisbridged calix[6]crown‐4‐ethers( I–III ), 1,3‐bisbridged calix[6]crown‐5‐ether( IV ), and 1,3‐bisbridged calix[6]crown‐6‐ether( V ) have been evaluated. The membranes all give good Nernstian response in the concentration range from 1×10^?7 to 1×10^?1 M of cesium ion. The best detection limits (?log aequation/tex2gif-inf-1.gif=7.08–7.36) are obtained for electrode membranes containing 1,3‐bisbridged cofacial‐calix[6]crown‐4‐ethers( I‐III ), and the values are the lowest compared with those reported previously. The highest selectivity coefficients [ 3.74(Cs/K), 2.63(Cs/Rb)] are obtained for the membrane of 1,3‐bisbridged calix[6]crown‐4‐ether( II ), and these values are also the highest compared with previous reports for Cs⁺‐ISEs. The highest selectivity towards cesium ion is attributed to the geometrically cofacial positions of two crown‐ethers in calix[6]crowns in order to provide the complex of cesium ion and eight oxygens of cofacial crowns.     

Ionophores in Rubidium Ion‐Selective Membrane Electrodes

Binaphthyl‐based crown ethers incorporating anthraquinone, benzoquinone, and 1,4‐dimethoxybezene have been synthesized and tested for Rb⁺ selective ionophores in the poly(vinyl chloride) (PVC) membrane. The membrane containing NPOE gave a better Rb⁺ selectivity than those containing either DOA or BPPA as a plasticizer. The response was linear within the concentration range of 1.0×10^?5–1.0×10^?1 M and the slope was 54.7±0.5 mV/dec. The detection limit was determined to be 9.0×10^?6 M and the optimum pH range of the membrane was 6.0–9.0. The ISE membrane exhibits good selectivity for Rb⁺ over ammonium, alkali metal, and alkaline earth metal ions. Selectivity coefficients for the other metal ions, log K^Pot were ?2.5 for Li⁺, ?2.4 for Na⁺, ?2.0 for H⁺, ?1.0 for K⁺, ?1.2 for Cs⁺, ?1.6 for NH₄⁺, ?4.5 for Mg²⁺, ?5.0 for Ca²⁺,?4.9 for Ba²⁺. The lifetime of the membrane was about one month.     

Ion‐Pair SN2 Substitution: Activation Strain Analyses of Counter‐Ion and Solvent Effects

The ion‐pair S_N2 reactions of model systems M_nF^n?1+CH₃Cl (M⁺=Li⁺, Na⁺, K⁺, and MgCl⁺; n=0, 1) have been quantum chemically explored by using DFT at the OLYP/6‐31++G(d,p) level. The purpose of this study is threefold: 1) to elucidate how the counterion M⁺ modifies ion‐pair S_N2 reactivity relative to the parent reaction F^?+CH₃Cl; 2) to determine how this influences stereochemical competition between the backside and frontside attacks; and 3) to examine the effect of solvation on these ion‐pair S_N2 pathways. Trends in reactivity are analyzed and explained by using the activation strain model (ASM) of chemical reactivity. The ASM has been extended to treat reactivity in solution. These findings contribute to a more rational design of tailor‐made substitution reactions.