Polymerization of 1,3‐dienes with functional groups. III. Free‐radical polymerization of N,N‐diethyl‐2‐methylene‐3‐butenamide

Free‐radical homo‐ and copolymerization behavior of N,N‐diethyl‐2‐methylene‐3‐butenamide (DEA) was investigated. When the monomer was heated in bulk at 60 °C for 25 h without initiator, rubbery, solid gel was formed by the thermal polymerization. No such reaction was observed when the polymerization was carried out in 2 mol/L of benzene solution with with 1 mol % of azobisisobutyronitrile (AIBN) as an initiator. The polymerization rate (R_p) equation was R_p ∝ [DEA]^1.1[AIBN]^0.51, and the overall activation energy of polymerization was calculated 84.1 kJ/mol. The microstructure of the resulting polymer was exclusively a 1,4‐structure where both 1,4‐E and 1,4‐Z structures were included. From the product analysis of the telomerization with tert‐butylmercaptan as a telogen, the modes of monomer addition were estimated to be both 1,4‐ and 4,1‐addition. The copolymerizations of this monomer with styrene and/or chloroprene as comonomers were also carried out in benzene solution at 60 °C. In the copolymerization with styrene, the monomer reactivity ratios obtained were r₁ = 5.83 and r₂ = 0.05, and the Q and e values were Q = 8.4 and e = 0.33, respectively. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 999–1007, 2004     

A Novel Conversion of 2, 4‐Diaryl‐2, 3‐dihydro‐1 H‐1, 5‐benzodiazepines into 2, 4‐Diaryl‐3 H‐1, 5‐benzodiazepines

A novel conversion of 2, 4‐diaryl‐2, 3‐dihydro‐1 H‐1, 5‐benzodiazepins into 2, 4‐diaryl‐3 H‐1, 5‐benzodiazepines by the reaction with m‐chloroperbenzoic acid (MCPBA) was reported.     

Isocyanide‐Based Three‐Component Synthesis of Highly Substituted 1,6‐Dihydro‐6,6‐dimethylpyrazine‐2,3‐dicarbonitrile, 3,4‐Dihydrobenzo[g]quinoxalin‐2‐amine,and 3,4‐Dihydro‐3,3‐dimethyl‐quinoxalin‐2‐amine Derivatives

A novel and efficient isocyanide‐based multicomponent reaction between alkyl or aryl isocyanides 1 , 2,3‐diaminomaleonitrile ( 2 ), naphthalene‐2,3‐diamines ( 6 ) or benzene‐1,2‐diamine ( 9 ), and 3‐oxopentanedioic acid ( 3 ) or Meldrum's acid ( 4 ) or ketones 7 was developed for the ecologic synthesis, at room temperature under mild conditions, of 1,6‐dihydropyrazine‐2,3‐dicarbonitriles 5a – 5f in H₂O without using any catalyst, and of 3,4‐dihydrobenzo[g]quinoxalin‐2‐amine and 3,4‐dihydro‐3,3‐dimethyl‐quinoxalin‐2‐amine derivatives 8a – 8g and 10a – 10e , respectively, in the presence of a catalytic amount of p‐toluenesulfonic acid (TsOH) in EtOH, in good to excellent yields (Scheme 1).     

Trans‐3,5‐dihydroperoxy‐3,5‐dimethyl‐1,2‐dioxalane/HBr System as New,Effective, Mild and Non‐toxic Reagent for Synthesis of 2‐Aryl‐1H‐benzothiazoles and 2‐Aryl‐1‐arylmethyl‐1H‐benzimidazoles

Ttrans‐3,5‐dihydroperoxy‐3,5‐dimethyl‐1,2‐dioxalane has been used as new, effective, solid, inexpensive and nontoxic oxidant for in situ generation of Br⁺ from HBr. This system has been applied as catalyst for synthesis of 2‐aryl‐1H‐benzothiazoles and 2‐aryl‐1‐arylmethyl‐1H‐benzimidazoles at room temperature in excellent yields and high purity.     

Polar,functionalized diene‐based material. III. Free‐radical polymerization of 2‐[(N,N‐dialkylamino)methyl]‐1,3‐butadienes

The bulk free‐radical polymerization of 2‐[(N,N‐dialkylamino)methyl]‐1,3‐butadiene with methyl, ethyl, and n‐propyl substituents was studied. The monomers were synthesized via substitution reactions of 2‐bromomethyl‐1,3‐butadiene with the corresponding dialkylamines. For each monomer the effects of the polymerization initiator, initiator concentration, and reaction temperature on the final polymer structure, molecular weight, and glass‐transition temperature (T_g) were examined. Using 2,2′‐azobisisobutyronitrile as the initiator at 75 °C, the resulting polymers displayed a majority of 1,4 microstructures. As the temperature was increased to 100 and 125 °C using t‐butylperacetate and t‐butylhydroperoxide, the percentage of the 3,4 microstructure increased. Differential scanning calorimetry indicated that all of the T_g values were lower than room temperature. The T_g values were higher when the majority of the polymer structure was 1,4 and decreased as the percentage of the 3,4 microstructure increased. The Diels–Alder side products found in the polymer samples were characterized using NMR and gas chromatography‐mass spectrometry methods. The polymerization temperature and initiator concentration were identified as the key factors that influenced the Diels–Alder dimer yield. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 4070–4080, 2000     

Preparation,Properties, and Reactions of Metal‐Containing Heterocycles. CX [1] Crystal Structure of 1, 1'‐Bis{[4‐(1, 10‐phenanthroline‐3‐yl‐ethynyl)‐2, 5‐dipropoxy‐phenyl]ethynyl}ferrocene

The crystal structure of 1, 1'‐bis{[4‐(1, 10‐phenanthroline‐3‐yl‐ethynyl)‐2, 5‐dipropoxy‐phenyl]ethynyl}ferrocene ( 1 ) is reported. This compound crystallizes with two chloroform solvent molecules in the monoclinic space group P2₁/c (No. 14), a = 15.4253(11), b = 23.2003(10), c = 17.2630(13) Å, β = 90.866(9)° and Z = 4. Both arms of the ferrocene moiety are parallel displaced with the four nitrogen atoms pointing to the same direction.     

Synthesis of 2‐Thioxohydropyridine‐3‐Carbonitrile, 2‐Alkylthiopyridine,Thienopyridine, Pyrazolopyridine Derivatives and Their Theoretical Calculations

Cyanothioacetamide ( 1 ) reacted with but‐2‐enal ( 2 ) to give the corresponding 4‐methyl‐2‐sulfanylpyridine‐3‐carbonitrile ( 7 ) which was used as a good starting material for the synthesis of 1‐(3‐amino‐4‐methylthieno[2,3‐b]pyridin‐2‐yl)ethan‐1‐one ( 10 ), 3‐amino‐4‐methylthieno[2,3‐b]pyridine‐2‐carboxamide ( 15 ), 3‐amino‐4‐methylthieno[2,3‐b]pyridine‐2‐carboxylate ( 18 ) and 3‐amino‐4‐methylthieno[2,3‐b]pyridin‐2‐ylarylketone 25a‐c through its reactions with each of (1‐chloroacetone ( 8 ), 3‐chloropentane‐2,4‐dione ( 11 ) or ethyl 2‐chloro‐3‐oxo‐butanoate ( 19 )), 2‐chloroacetamide ( 13 ), ethyl 2‐chloroacetate ( 16 ) and 2‐bromo‐1‐arylethan‐ 1 ‐one 23a‐c , respectively. Considering the data of elemental analyses, IR, ¹HNMR, mass spectra and theoretical calculations, structures of the newly synthesized heterocyclic compounds were elucidated.     

Synthesis,Anticancer Evaluation,and Molecular Docking Studies of Novel (4‐Hydroxy‐2‐Thioxo‐3,4‐Dihydro‐2H‐[1,3]Thiazin‐6‐Yl)‐Chromen‐2‐Ones via a Multicomponent Approach

A series of coumarin‐substituted 1,3‐thiazine‐2‐thione derivatives ( 4a–m ) were synthesized via the multicomponent reaction of 3‐chloro‐3‐(2‐oxo‐2H‐chromen‐3‐yl)acrylaldehyde ( 1 ) carbon disulfide ( 2 ), and various primary amines ( 3 ), in presence of triethylamine and acetonitrile under stirring with good yields. The structures of all the synthesized compounds were characterized by analytical and spectral studies. Further, the synthesized compounds were screened for their in vitro antiproliferative activities against different cancer cell lines (A549, MDA‐MB‐231, MCF7, HeLa, and B16F10). Studies on the molecular interactions to recognize the hypothetical binding motif of the title compounds with the target Hsp 100 were carried out employing the Schrodinger software. Compounds 4a , 4c and 4m showed activity against all the five cell lines compared with the reference drug, and 4a exhibited the least IC₅₀ concentration of 7.56 ± 1.07 μg/mL against MCF7. This in vitro anticancer result was supported by in silico docking and in silico ADME (absorption, distribution, metabolism, and excretion) studies as well.     

The First One‐Pot,Solvent‐Free,Microwave‐Accelerated,Three‐Component Synthesis of Spirothiazolidin‐4‐ones via Staudinger/Aza‐Wittig Coupling/Cyclization

An efficient and rapid, solvent‐free, microwave‐accelerated, one‐pot, three‐component protocol for the synthesis of spirothiazolidin‐4‐ones from organic azides is reported for the first time via Staudinger/aza‐Wittig coupling/cyclization. The solvent‐free approach overcomes the limitations associated with the prevailing solution‐phase methodologies in the case of amines. In particular, its novelty is that it eradicates the vital limitation, i.e., the accumulation of H₂O (by‐product), which is known to affect the yield and rate of the reaction, thus affording the spirothiazolidin‐4‐ones in short reaction times in excellent yields.     

Simple,Efficient, and Catalyst‐Free Synthesis of (2‐Amino‐4H‐1‐benzopyran‐4‐yl)phosphonates in Polyethylene Glycol

Several (2‐amino‐4H‐1‐benzopyran‐4‐yl)phosphonates were efficiently synthesized by employing a multicomponent protocol involving a salicylaldehyde, malononitrile or ethyl cyanoacetate, and a trialkyl phosphite in polyethylene glycol. The latter could be recovered and re‐used. No additional solvent or catalyst was required. To the best of our knowledge, this is the first report of the one‐pot preparation of (2‐amino‐4H‐1‐benzopyran‐4‐yl)phosphonic acid dimethyl esters.     

Synthesis,Characterization and Crystal Structure of Some Novel 1‐Aryl‐2‐Thioxo‐2,3‐Dihydro‐1H‐Quinazolin‐4‐Ones

The base catalyzed intramolecular nucleophilic cyclization of 1‐(2‐haloaroyl)‐3‐aryl thioureas ( 1a‐i ), in the presence of DMF afforded the 1‐aryl‐2‐thioxo‐2,3‐dihydro‐1H‐quinazolin‐4‐ones ( 2a‐i ). The structures were confirmed by spectroscopic data, elemental analyses and in case of the 2c by single crystal X‐ray diffraction data. The mechanistic studies support an intramolecular nucleophilic substitution (S_NAr mechanism) rather than intramolecular aromatic substitution (S_RN1 mechanism).     

Three‐component One‐pot Synthetic Route to Functionalized N‐Phenyl‐ and N,N‐(1,4‐phenylene)‐2‐alkylimino‐2,3‐dihydrothiazoles under Mild,Solvent‐ and Catalyst‐free Conditions

A simple and efficient one‐pot synthesis of alkyl‐2‐(alkylimino)‐4‐methyl‐3‐phenyl‐2,3‐dihydrothiazole‐5‐carboxylate and dialkyl 3,3′‐(1,4‐phenylene)‐bis‐[2‐(alkylimino)‐4‐methyl‐2,3‐dihydrothiazole‐5‐carboxylate] derivatives from the reaction of phenylisothiocyanate (and also 1,4‐phenylene diisothiocyanate) and primary alkylamines in the presence of 2‐chloro‐1,3‐dicarbonyl compounds is described. This new protocol has several advantages such as lack of necessity of the catalyst and solvent, good yields,mild conditions and short times for reaction.     

1,2,3-三唑取代的1,4-二氢-4-氧代-1,5-二氮杂萘-3-羧酸衍生物的设计、合成与HIV整合酶抑制活性评价

一价铜催化端炔与叠氮化物的1, 3-环加成反应是一种快速构建小分子库并筛选其可能性质的的主要方法。本文报道了1,2,3-三唑取代的1,4-二氢-4-氧代-1,5-二氮杂萘-3-羧酸衍生物的设计与合成。在该类化合物中,疏水性与亲水性片段通过Click反应有效地连接。所设计化合物8和12的结构通过光谱手段进行了表征;其可能的HIV整合酶抑制活性也进行了筛选。     

Syntheses,antitumor activities,and antiangiogenesis of exo‐3,6‐epoxy‐1,2,3,6‐tetrahydrophthalimidoethanoyl‐ 5‐fluorouracil and its polymers

A new monomer, exo‐3,6‐epoxy‐1,2,3,6‐tetrahydrophthalimidoethanoyl‐5‐fluorouracil (ETFU), was synthesized by the reaction of exo‐3,6‐epoxy‐1,2,3,6‐tetrahydrophthalimidoethanoyl chloride (ETPC) and 5‐fluorouracil (5‐FU). The homopolymer of ETFU and its copolymers with acrylic acid (AA) and vinyl acetate (VAc) were prepared via photopolymerizations with 2,2‐dimethoxy‐2‐phenylacetophenone at 25 °C for 48 h. The structures of the synthesized monomer and polymers were identified by Fourier transform infrared, ¹H NMR, and ¹³C NMR spectroscopy and elemental analysis. The ETFU contents in poly(ETFU‐co‐AA) and poly(ETFU‐co‐VAc) were 26 mol % and 26 mol %, respectively. The number‐average molecular weights of the polymers, as determined by gel permeation chromatography, ranged from 5600 to 17,000. The in vitro cytotoxicities of 5‐FU and the synthesized samples against mouse mammary carcinoma and human histiocytic lymphoma cancer cell lines increased in the following order: ETFU > 5‐FU > poly(ETFU‐co‐AA) > poly(ETFU) > poly(ETFU‐co‐VAc). The in vivo antitumor activities of the polymers against Balb/C mice bearing the sarcoma 180 tumor cells were greater than those of 5‐FU at all doses tested. The inhibitions of the samples for SV40 DNA replication and antiangiogenesis were much greater than the inhibition of the control. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 4272–4281, 2000     

On the Reactions of Furan‐2,3‐diones with Oxindole (=1,3‐Dihydro‐2H‐indol‐2‐one) and Lawesson Reagent. Synthesis of New 1,3‐Dihydro‐2H‐indol‐2‐ones,Bis‐furanones,and Bis‐pyrrolones

Lactone analogues of 3‐substituted oxindoles (=1,3‐dihydro‐2H‐indol‐2‐ones) and nonbenzoid oxa‐analogous isoindigoid or nonbenzoid isoindigoid dyes were prepared by the reactions of furan‐2,3‐diones with oxindole and Lawesson reagent (Schemes 1 and 3), respectively. So, new derivatives of 2‐oxobutanoic acid, bis‐furanone, and bis‐pyrrolone, which are potentially biologically active compounds, were synthesized for the first time.