Electrochemical DNA Biosensor Based on Partially Reduced Graphene Oxide Modified Carbon Ionic Liquid Electrode for the Detection of Transgenic Soybean A2704‐12 Gene Sequence

In this work a partially reduced graphene oxide (p‐RGO) modified carbon ionic liquid electrode (CILE) was prepared as the platform to fabricate an electrochemical DNA sensor, which was used for the sensitive detection of target ssDNA sequence related to transgenic soybean A2704‐12 sequence. The CILE was fabricated by using 1‐butylpyridinium hexafluorophosphate as the binder and then p‐RGO was deposited on the surface of CILE by controlling the electroreduction conditions. NH₂ modified ssDNA probe sequences were immobilized on the electrode surface via covalent bonds between the unreduced oxygen groups on the p‐RGO surface and the amine group at the 5′‐end of ssDNA, which was denoted as ssDNA/p‐RGO/CILE and further used to hybridize with the target ssDNA sequence. Methylene blue (MB) was used as electrochemical indicator to monitor the DNA hybridization. The reduction peak current of MB after hybridization was proportional to the concentration of target A2704‐12 ssDNA sequences in the range from 1.0×10^?12 to 1.0×10^?6 mol/L with a detection limit of 2.9×10^?13 mol/L (3σ). The electrochemical DNA biosensor was further used for the detection of PCR products of transgenic soybean with satisfactory results.     

An Electrochemical DNA Sensor Based on Electrodepositing Aluminum Ion Films on Stearic Acid‐Modified Carbon Paste Electrode and Its Application for the Detection of Specific Sequences Related to Bar Gene and CP4 Epsps Gene

An electrochemical DNA biosensor was fabricated by immobilizing DNA probe on aluminum ion films that were electrodeposited on the surface of the stearic acid‐modified carbon paste electrode (CPE). DNA immobilization and hybridization were characterized with cyclic voltammetry (CV) by using methylene blue (MB) as indicator. MB has a couple of well‐defined voltammetric redox peaks at the CPE. The currents of redox peaks of MB decreased after depositing aluminum ion films on the CPE (Al(III)/CPE) and increased dramatically after immobilizing DNA probe (ssDNA/Al(III)/CPE). Hybridization of DNA probe led to a marked decrease of the peak currents of MB, which can be used to detect the target single‐stranded DNA. The conditions for the preparation of Al(III)/CPE, and DNA immobilization and hybridization were optimized. The specific sequences related to bar transgene in the transgenic corn and the PCR amplification of CP4 epsps gene from the sample of transgenic roundup ready soybean were detected by differential pulse voltammetry (DPV) with this new electrochemical DNA biosensor. The difference between the peak currents of MB at ssDNA/Al(III)/CPE and that at hybridization DNA modified electrode (dsDNA/Al(III)/CPE) was applied to determine the specific sequence related to the target bar gene with the dynamic range comprised between 1.0×10^?7 mol/L to 1.0×10^?4 mol/L. A detection limit of 2.25×10^?8 mol/L of oligonucleotides can be estimated.     

Electrochemical DNA Biosensor Based on Graphene and TiO2 Nanorods Composite Film for the Detection of Transgenic Soybean Gene Sequence of MON89788

Based on graphene (GR), TiO₂ nanorods, and chitosan (CTS) nanocomposite modified carbon ionic liquid electrode (CILE) as substrate electrode, a new electrochemical DNA biosensor was effectively fabricated for the detection of the transgenic soybean sequence of MON89788. By using methylene blue (MB) as hybridization indicator for monitoring the hybridization with different ssDNA sequences, the differential pulse voltammetric response of MB on DNA modified electrodes were recorded and compared. Due to the synergistic effects of TiO₂ nanorods and GR on the electrode surface, the electrochemical responses of MB were greatly increased. Under optimal conditions the differential pulse voltammetric response of the target ssDNA sequence could be detected in the range from 1.0×10^?12 to 1.0×10^?6 mol/L with a detection limit of 7.21×10^?13 mol/L (3σ). This electrochemical DNA biosensor was further applied to the polymerase chain reaction (PCR) product of transgenic soybeans with satisfactory results.     

纳米金放大计时库仑法的PML/RARα融合基因检测

应用恒电位在金基底表面电化学沉积纳米金,通过Au—S键将巯基修饰DNA探针固定在纳米金表面,与互补靶序列杂交,构建计时库仑电化学DNA传感器,并检测急性早幼粒细胞白血病(APL)PML/RARα融合基因.采用扫描电子显微术(SEM)与电化学交流阻抗技术(EIS)观察纳米金和表征DNA传感器的构筑过程.以氯化六氨合钌([Ru(NH3)6]Cl3,RuHex)作电化学杂交指示剂,由计时库仑法检测人工合成APL的PML/RARα融合基因.结果表明,纳米金能放大RuHex检测信号,杂交前后电量差值(ΔQ)与靶标链DNA浓度的对数(lgC)值在1.0×10-13～1.0×10-9mol.L-1范围内呈线性关系,检出下限3.7×10-14mol.L-1(S/N=3).该法操作简便、特异性好,有望用于实际样品的检测.     

Application of diazo-thiourea and gold nano-particles in the design of a highly sensitive and selective DNA biosensor

An effective procedure for constructing a DNA biosensor is developed based on covalent immobilization of NH_2 labeled,single strand DNA(NH_2-ssDNA) onto a self-assembled diazo-thiourea and gold nanoparticles modified Au electrode(diazo-thiourea/GNM/Au).Gold nano-particles expand the electrode surface area and increase the amount of immobilized thiourea and single stranded DNA(ssDNA) onto the electrode surface.Diazo-thiourea film provides a surface with high conductibility for electron transfer and a bed for the covalent coupling of NH_2-ssDNA onto the electrode surface.The immobilization and hybridization of the probe DNA on the modified electrode is studied by differential pulse voltammetry(DPV) using methylene blue(MB) as a well-known electrochemical hybridization indicator.The linear range for the determination of complementary target ssDNA is from 9.5(±0.1) × 10~(-13) mol/L to1.2(±0.2) x 10~(-9) mol/L with a detection limit of 1.2(±0.1) 10~(-13) mol/L.     

Sensitively Electrochemical Sensing for Sequence‐Specific Detection of Phosphinothricin Acetyltransferase Gene: Layer‐by‐Layer Films of Poly‐L‐Lysine and Au‐Carbon Nanotube Hybrid

An electrochemical DNA sensing film was constructed based on the multilayers comprising of poly‐L ‐lysine (pLys) and Au‐carbon nanotube (Au‐CNT) hybrid. A precursor film of mercaptopropionic acid (MPA) was firstly self‐assembled on the Au electrode surface. pLys and Au‐CNT hybrid layer‐by‐layer assembly films were fabricated by alternately immersing the MPA‐modified electrode into the pLys solution and Au‐CNT hybrid solution. Cyclic voltammetry was used to monitor the consecutive growth of the multilayer films by utilizing [Fe(CN)₆]^3?/4? and [Co(phen)₃]^3+/2+ as the redox indicators. The outer layer of the multilayer film was the positively charged pLys, on which the DNA probe was easily linked due to the strong electrostatic affinity. The hybridization detection of DNA was accomplished by using methylene blue (MB) as the indicator, which possesses different affinities to dsDNA and ssDNA. Differential pulse voltammetry was employed to record the signal response of MB and determine the amount of the target DNA sequence. The established biosensor has high sensitivity, a relatively wide linear range from 1.0×10^?10 mol/L to 1.0×10^?6 mol/L and the ability to discriminate the fully complementary target DNA from single or double base‐mismatched DNA. The sequence‐specific DNA related to phosphinothricin acetyltransferase gene from the transgenically modified plants was successfully detected.     

基于直立碳纳米管大面积金粒子的DNA生物传感器用于早幼粒白血病/维甲酸受体α融合基因检测

基于直立碳纳米管上的大面积金粒子构建了新型的电化学DNA生物传感器,用于急性早幼粒细胞白血病PML/RARα融合基因的检测。首先在直立碳纳米管电极表面溅射金粒子,采用自组装方法将巯基修饰的单链DNA固定到电极上,将氨基修饰的单链DNA和羧基化的CdTe量子点通过酰胺缩合反应生成CdTe修饰的DNA探针,通过与目标DNA的双杂交反应形成三明治结构,利用差分脉冲阳极溶出伏安法检测电极表面捕获的CdTe量子点,从而对DNA进行定量分析。结果表明,电极上Cd2+峰电流与目标DNA浓度(1.0×10-12~1.0×10-8 mol/L)的对数值呈线性关系,线性方程为ipa(μA)=1.626+0.132lgC(mol/L)(R=0.996),检出限为4.0×10-13 mol/L(3σ)。传感器表现出良好的重现性和稳定性。     

微囊藻属DNA电化学传感器的研制

利用自组装法将巯基修饰的DNA探针与6-巯基-1-己醇(MCH)固定到金电极表面,制备了微囊藻属特定DNA传感器,将该传感器与完全互补的微囊藻DNA序列、完全不互补序列,以及单碱基错配序列进行杂交,以Hoechst 33258为杂交指示剂,应用循环伏安法和线性扫描伏安法研究了该传感器对目标DNA的电化学检测行为.研究表明,当与完全互补DNA杂交后,Hoechst 33258氧化信号有明显的增强.实验对自组装时间、MCH浸泡时间及杂交液离子浓度进行了优化.结果表明,当自组装时间为90 min,MCH浸泡时间为1 h,杂交溶液中NaCl浓度为0.3 mol/L时,电化学信号最好.目标DNA的氧化峰电流值与其浓度在1×10~(-8) ～1×10~(-6) mol/L范围内呈良好的线性关系,检出限为8.1×10~(-9) mol/L.     

基于多边形金纳米颗粒的非标记型可卡因适体传感器的研制

实验合成了多边形金纳米颗粒,通过壳聚糖(CHIT)将合成的多边形金纳米颗粒固定在玻碳电极表面,然后通过自组装技术将带巯基的捕获DNA探针固定在修饰有多边形金纳米颗粒的电极表面,利用杂交反应使可卡因适体与DNA捕获探针结合,制成非标记型可卡因适体传感器。以六氨合钌作为电化学指示剂,通过测量传感器与目标物可卡因结合前后电流变化情况对可卡因进行测定。考察了缓冲溶液的pH、可卡因培育时间、扫描速度等对测定的影响。结果表明,在pH为7.40时该传感器的检测范围为1.0×10-10～1.0×10-3 mol/L,检测限为3.0×10-11 mol/L。该传感器制作简单,响应好,抗干扰能力强。     

新型"三明治"结构DNA电化学传感器对急性早幼粒细胞白血病相关融合基因的检测

基于急性早幼粒细胞白血病(APL)中PML/RARα融合基因的碱基序列,设计了新型的锁核酸(LNA)修饰寡核苷酸作为捕获探针和信号探针,研究出一种基于"三明治"传感模式的电化学生物传感器对PML/RARα融合相关基因进行检测.靶序列分别与捕获探针和信号探针杂交后形成"三明治"结构.将修饰电极置于含有底物3,3′,5,5′-四甲基联苯胺(TMB)和过氧化氢的测定溶液中,用计时电流法检测靶序列.结果表明,该传感器可定量识别和检测溶液中人工合成的短链APL PML/RARα融合基因片段.经过条件优化,杂交前后电流值与靶标链浓度在1.0×10~(-12) ～2.5×10~(-11) mol/L范围内呈良好的线性关系,检出限为8.5×10~(-13) mol/L.该方法简单、特异性好,有望用于实际样品的检测.     

Synergistic effects of nano-ZnO/multi-walled carbon nanotubes/chitosan nanocomposite membrane for the sensitive detection of sequence-specific of PAT gene and PCR amplification of NOS gene

The remarkable synergistic effects of the zinc oxide (ZnO) nanoparticles and multi-walled carbon nanotubes (MWNTs) were developed for the ssDNA probe immobilization and fabrication of the electrochemical DNA biosensor. The ZnO/MWNTs/chitosan nanocomposite membrane-modified glassy carbon electrode (ZnO/MWNTs/CHIT/GCE) was fabricated and the ssDNA probes were immobilized on the modified electrode surface. The preparation method is quite simple and inexpensive. The hybridization events were monitored by differential pulse voltammetry (DPV) using methylene blue (MB) as an indicator. As compared with previous MWNTs-based DNA biosensors, this composite matrix combined the attractive biocompatibility of ZnO nanoparticles with the excellent electron-transfer ability of MWNTs and fine membrane-forming ability of CHIT increased the DNA attachment quantity and complementary DNA detection sensitivity. The approach described here can effectively discriminate complementary DNA sequence, noncomplementary sequence, single-base mismatched sequence and double-base mismatched sequence related to phosphinothricin acetyltransferase (PAT) gene in transgenic corn. Under optimal conditions, the dynamic detection range of the sensor to PAT gene complementary target sequence was from 1.0 × 10⁻¹¹ to 1.0 × 10⁻⁶ mol/L with the detection limit of 2.8 × 10⁻¹² mol/L. The polymerase chain reaction (PCR) amplification of nopaline synthase (NOS) gene from the real sample of one kind of transgenic soybeans was also satisfactorily detected with this electrochemical DNA biosensor, suggesting that the ZnO/MWNTs/CHIT nanocomposite hold great promises for sensitive electrochemical biosensor applications.     

间苯二酚在TiO2-石墨烯修饰玻碳电极上的电化学行为及测定

制备了TiO2-石墨烯修饰玻碳电极。用循环伏安法(CV)和差分脉冲伏安法(DPV)对间苯二酚在该修饰电极的电化学行为进行了研究。实验结果表明,在pH值为6.0的磷酸盐缓冲液(PBS)中,该修饰电极对间苯二酚具有良好的电催化作用。对TiO2-石墨烯用量、支持电解质、pH和扫描速度等实验条件进行了优化。在优化条件下,利用DPV测定,间苯二酚的氧化峰电流与其浓度在1.0×10-6～1.0×10-4mol/L范围内呈良好的线性关系,线性相关系数为0.995。检出限为2×10-7mol/L。将该方法应用于模拟水样中间苯二酚的测定,回收率为96.5～104.2%。     

Electrochemical sensing of DNA immobilization and hybridization based on carbon nanotubes/nano zinc oxide/chitosan composite film

A novel electrochemical DNA biosensor based on zinc oxide （ZnO） nanoparticles and multi-walled carbon nanotubes （MWNTs） for DNA immobilization and enhanced hybridization detection is presented. The MWNTs/nano ZnO/chitosan composite film modified glassy carbon electrode （MWNTs/ZnO/CHIT/GCE） was fabricated and DNA probes were immobilized on the electrode surface. The hybridization events were monitored by differential pulse voltammetry （DPV） using methylene blue （MB） as an indicator. The sensor can effectively discriminate different DNA sequences related to PAT gene in the transgenic corn, with a detection limit of 2.8× 10^-12 mol/L of target sequence.     

Electrocatalytic oxidation of dopamine at an ionic liquid modified carbon paste electrode and its analytical application

A room-temperature ionic liquid N-butylpyridinium hexafluorophosphate was used as a binder to construct an ionic liquid modified carbon paste electrode, which was characterized by scanning electron microscopy and electrochemical impedance spectroscopy. The ionic liquid carbon paste electrode (IL-CPE) showed enhanced electrochemical response and strong analytical activity towards the electrochemical oxidation of dopamine (DA). A pair of well-defined quasireversible redox peaks of DA appeared, with the redox peaks located at 215 mV (E _pa) and 151 mV (E _pc) (vs. the saturated calomel electrode, SCE) in pH 6.0 phosphate buffer solution. The formal potential (E ^0′) was calculated as 183 mV (vs. SCE) and the peak-to-peak separation as 64 mV. The electrochemical behavior of DA on the IL-CPE was carefully investigated. Under the optimal conditions, the anodic peak currents increased linearly with the concentration of DA in the range 1.0 × 10⁻⁶–8.0 × 10⁻⁴ mol/L and the detection limit was calculated as 7.0 × 10⁻⁷ mol/L (3σ). The interferences of foreign substances were investigated and the proposed method was successfully applied to the determination of DA injection samples. The IL-CPE fabricated was sensitive, selective and showed good ability to distinguish the coexisting ascorbic acid and uric acid.     

PB/Au/CILE的制备与应用

混合离子液体(N-丁基吡啶六氟磷酸盐,[BuPy][PF6])与石墨粉,制备了离子液体碳糊电极(CILE),再采用电沉积法制得PB/Au/CILE修饰电极,研究了该修饰电极的电化学行为及其对H2O2的电催化,建立了H2O2的计时安培测定新方法。结果表明:在该修饰电极上PB产生了一对准可逆的氧化还原峰,并对H2O2表现出良好电催化作用,安培法测定H2O2的线性范围为5.0×10-6～1.55×10-4mol/L,检出限为1.0×10-6mol/L(S/N=3)。连续10次测定5.0×10-6mol/L H2O2峰电流的RSD为2.1%。     

Sensitive detection of esculetin based on a CdSe nanoparticles-decorated poly(diallyldimethylammonium chloride)-functionalized graphene nanocomposite film

An electrochemical sensor based on a CdSe nanoparticles (NPs)-decorated poly(diallyldimethylammonium chloride) (PDDA)-functionalized graphene (CdSe-PDDA-G) nanocomposite was fabricated for the sensitive detection of esculetin. The nanocomposite was characterized by X-ray diffraction (XRD), ultraviolet/visible spectra (UV-vis) and transmission electron microscopy (TEM). Cyclic voltammetry (CV) and differential pulse voltammetry (DPV) were used to investigate the electrochemical behaviors of esculetin on the CdSe-PDDA-G composite film-modified glassy carbon electrode (GCE). The experimental results indicated that the incorporation of CdSe NPs with PDDA-G greatly enhanced the electrochemical response of esculetin. This electrochemical sensor displayed satisfactory analytical performance for esculetin detection over a range from 1.0 × 10(-8) to 5.0 × 10(-5) mol L(-1) with a detection limit of 4.0 × 10(-9) mol L(-1) (S/N = 3). Moreover, the sensor also exhibited good reproducibility and stability, and could be used for the detection of esculetin in real samples with satisfactory results.     

基于抗原决定基的胰岛素分子印迹电化学传感器

采用抗原决定基法制备了胰岛素电化学分子印迹传感器.以胰岛素C端多肽作为模板分子,定向自组装在Au电极上,以邻苯二胺为功能单体,电化学聚合制备分子印迹聚合膜.以NaOH为洗脱液,洗脱模板分子,形成的与胰岛素C端多肽三维结构相匹配的分子印迹孔穴能特异性识别胰岛素.重吸附胰岛素分子后,以K3[Fe(CN)6]/K4[Fe(CN)6]为探针,通过测量探针在电极表面产生的电流大小实现胰岛素的间接测定.在1.0 × 10-14~5.0 × 10-13 mol/L浓度范围内,传感器的电流响应值与胰岛素浓度呈良好的线性关系,检出限为7.24 × 10-15 mol/L(3σ).此传感器具有较好的选择性和稳定性,并成功用于血清样品中胰岛素的测定.     

二氧化锆/石墨烯复合材料对亚硝酸盐的电化学传感研究

制备了一种二氧化锆/还原氧化石墨烯(ZrO2NPs/rGO)复合材料修饰电极的亚硝酸盐电化学传感器,并成功用于亚硝酸盐的检测.采用循环伏安法和电流-时间曲线考察了修饰电极的电化学行为.实验结果表明,ZrO2NPs/rGO复合材料修饰电极对亚硝酸盐具有良好的电流响应.在最优实验条件下,电流-时间曲线中的电流响应信号与亚硝酸盐浓度在3.0×10Symbolm@@_7～1.0×10Symbolm@@_6 mol/L和1.0×10Symbolm@@_6～6.0×10Symbolm@@_6 mol/L的范围内呈良好的线性关系,检测限为1.0×10Symbolm@@_7 mol/L(S/N 3).该传感器灵敏性高、稳定性和重现性好.使用此传感器检测实际样品香肠中的亚硝酸盐的回收率为93.7％～110.4％,相对标准偏差为1.6％～2.1％.     

氧化石墨烯修饰碳离子液体电极同时测定鸟嘌呤和腺嘌呤

以离子液体1-丁基-3-甲基咪唑六氟磷酸盐为粘合剂制备了碳糊电极,然后将氧化石墨烯滴涂到碳糊电极表面制成了一种新型的氧化石墨烯修饰碳离子液体电极。研究了鸟嘌呤和腺嘌呤在修饰电极上的电化学行为。实验结果表明,在0.1 mol/L醋酸盐缓冲溶液中(pH4.5),鸟嘌呤和腺嘌呤在该修饰电极上具有良好的电化学行为,在2.0×10-7～1.5×10-5mol/L浓度范围内鸟嘌呤和腺嘌呤的浓度在该电极上与电化学响应信号呈良好的线性关系,相关系数分别为为0.992和0.996。信噪比为3时,检出限为1.0×10-8mol/L。     

基于DNA四面体纳米结构探针的电化学生物传感器检测DNA甲基化

该文以DNA四面体纳米结构探针(TSP)为捕获探针,将辣根过氧化物酶标记的IgG抗体结合在纳米金颗粒表面(AuNPs-IgG-HRP)作为信号分子,构建了一种新型DNA甲基化电化学传感器。利用一步热变性法组装成TSP后,通过Au—S键固定在修饰纳米金颗粒的金电极表面,经过靶标DNA杂交、5-甲基胞嘧啶(5-mc)抗体及AuNPs-IgG-HRP结合后,用差分脉冲伏安法(DPV)进行检测。采用循环伏安法(CV)和电化学阻抗谱(EIS)对修饰电极的构建过程进行电化学表征。探究了杂交时间、5-mc抗体浓度、IgG-HRP加入体积、氢醌(HQ)和过氧化氢(H2O2)浓度对传感器的影响。在最佳条件下,该传感器对甲基化DNA的线性响应范围为1.0×10-15~1.0×10-10 mol/L,检出限(S/N=3)为4.4×10-16 mol/L。该传感器具有良好的选择性和稳定性,为DNA甲基化检测提供了新方法。