Zweikernige Palladium(II)‐, Platin(II)‐ und Iridium(III)‐Komplexe von Bis[imidazol‐4‐yl]alkanen

Dinuclear Palladium(II), Platinum(II), and Iridium(III) Complexes of Bis[imidazol‐4‐yl]alkanes The reaction of bis(1,1′‐triphenylmethyl‐imidazol‐4‐yl) alkanes ((CH₂)_n bridged imidazoles L(CH₂)_nL, n = 3–6) with chloro bridged complexes [R₃P(Cl)M(μ‐Cl)M(Cl)PR₃] (M = Pd, Pt; R = Et, Pr, Bu) affords the dinuclear compounds [Cl₂(R₃P)M–L(CH₂)_nL–M(PR₃)Cl₂] 1 – 17 . The structures of [Cl₂(Et₃P)Pd–L(CH₂)₃L–Pd(PEt₃)Cl₂] ( 1 ), [Cl₂(Bu₃P)Pd–L(CH₂)₄L–Pd(PBu₃)Cl₂] ( 10 ), [Cl₂(Et₃P)Pd–L(CH₂)₅L–Pd(PEt₃)Cl₂] ( 3 ), [Cl₂(Et₃P)Pt–L(CH₂)₃L–Pt(PEt₃)Cl₂] ( 13 ) with trans Cl–M–Cl groups were determined by X‐ray diffraction. Similarly the complexes [Cl₂(Cp*)Ir–L(CH₂)_nL–Ir(Cp*)Cl₂] (n = 4–6) are obtained from [Cp*(Cl)Ir(μ‐Cl)₂Ir(Cl)Cp*] and the methylene bridged bis(imidazoles).     

Palladium Analog of Gros Salt: A Simple Method of Preparation and Some of Its Properties

A method for the preparation of [Pd(NH₃)₄Cl₂]Cl₂ through the oxidation of [Pd(NH₃)₄]Cl₂ with a mixture of HCl and HNO₃ acids (3 : 1) in an aqueous-ammonia solution was proposed. The composition of the product was confirmed by X-ray diffraction and chemical analyses and IR and Raman spectroscopy. The yield of the product was higher than 90%, and the content of the main substance was estimated as at least 95%. The crystallographic parameters of [Pd(NH₃)₄Cl₂]Cl₂ were determined. The salt was found to be isostructural to Gros salt [Pt(NH₃)₄Cl₂]Cl₂.     

Die Fällung des PdII als [Pd(NH3)2Cl2] sowie das Verhalten verschiedener Begleitelemente

Precipitation of Pd^II as [Pd(NH₃)₂Cl₂] and the Behaviour of Various Impurities The dependence of [Pd(NH₃)₂Cl₂] precipitation upon reaction conditions (pH, Cl^? content, reaction time, temperature) has been studied. The dependence of residual Pd content in the mother liquor upon these parameters was found to be significant only for the precipitation temperature (c_Pd at 20°C: 1.65 ± 0.11 mM; at 50°C: 6.70 ± 0.58 mM). The increase of Pd concentration was due to the formation of Pd(NH₃)Cl₃^?. Among the impurities studied Cr, Ru, and Au were largely precipitated in the NH₃ medium. In subsequent precipitation of [Pd(NH₃)₂Cl₂] the following order of coprecipitation was found: The first four elements could be separated only incompletely by repeated reprecipitation. The coprecipitation of the platinum-group metals and of Au was highly dependence upon preceding formation of ammine complexes of these elements. The considerable coprecipitation of Pt^IV is presumably due to the formation of mixed Pd/Pt compounds, whereas the other impurities are adsorbed by [Pd(NH₃)₂Cl₂].     

Interaction Between Pd(RaaiR′)Cl<Subscript>2</Subscript> and Adenine: Reaction Dynamics and Mechanism [RaaiR′ = 1-alkyl-2-(arylazo)imidazole]

Nucleophilic substitution of Pd(RaaiR′)Cl₂ [RaaiR′=1-alkyl-2-(arylazo)imidazole, p-R—C₆H₄— N=N—C₃H₂NN-1-R′; where R= H(a)/Me(b)/Cl(c) and R′ = Et(1)/Bz(2)] with adenine (A) in MeCN–water (1:1) at 298 K, to form [Pd(A)₂]Cl₂, has been studied spectrophotometrically under pseudo-first-order conditions and the analyses support a nucleophilic association path. The reaction follows the rate law, rate = {a+k [A] ₀²[Pd(RaaiR′)Cl₂]: first-order in Pd(RaaiR′)Cl₂ and second-order in A. The rate increases as follows: Pd(RaaiEt)Cl₂(1) < Pd(RaaiBz)Cl₂(2) and Pd(MeaaiR′)Cl₂(b) < Pd(HaaiR′)Cl₂(a) < Pd(ClaaiR′)Cl₂(c). External addition of Cl⁻ (LiCl) suppresses the rate (rate 1/[Cl⁻]). The activation parameters, H⁰ and S⁰ of the reactions were calculated from the Eyring plot and support the proposed mechanism.     

1,2-Bis-[(5-methyl/chloro/nitro)-2-1H-benzimidazolyl]-1,2-ethanediols and their PdCl2 complexes

1,2-Bis-[(5-methyl)-2-1H-benzimidazolyl]- (L ¹), 1,2-bis-[(5-chloro)-2-1H-benzimidazolyl]- (L ²), 1,2-bis-[(5-nitro)-2-1H-benzimidazolyl]-1,2-ethanediol (L ³) and their PdCl₂ complexes were synthesized and characterized by elemental analysis, molar conductivity, i.r. and ¹H-n.m.r. spectra. The benzene ring substituents lead to a decrease in melting point. The methyl group reduces the solubility and the acidity of L ¹ and Pd(L ¹)Cl₂, whereas the Cl and NO₂ groups increase the solubility and the acidity of L ², L ³, Pd(L ²)Cl₂ and Pd(L ³)Cl₂. In Pd(L ¹)Cl₂ and Pd(L ²)Cl₂ complexes, the ligands act as a bidentate through two nitrogen atoms. In Pd(L ³)Cl₂, ligand coordination occurs through one OH group oxygen atom and one of the benzimidazole nitrogen atoms.     

Kinetic and mechanistic studies of the interaction of 2-mercapto pyridine with dichloro[1-alkyl-2-(arylazo)imidazole]palladium(II) complexes

Nucleophilic substitution of Pd(RaaiR′)Cl₂ [(RaaiR′ = 1-alkyl-2-(arylazo)imidazole, p-R-C₆H₄-N=N-C₃H₂NN-1-R′; where R = H(a)/ Me(b)/ Cl(c) and R′ = Et(1)/Bz(2)] with 2-Mercaptopyridine (2-SH-Py) in acetonitrile (MeCN) at 298 K, to form [Pd₂(2-S-Py)₄], has been studied spectrophotometrically under pseudo-first-order conditions and the analyses support the nucleophilic association path. The reaction follows the rate law, Rate = {k ₀ + k [2-SH-Py] ₀ ² }[Pd(RaaiR′)Cl₂]: first order in Pd(RaaiR′)Cl₂ and second order in 2-SH-Py. The rate of the reaction follows the order: Pd(RaaiEt)Cl₂ (1) < Pd(RaaiBz)Cl₂ (2) and Pd(MeaaiR′)Cl₂ (b) < Pd(HaaiR′)Cl₂ (a) < Pd(ClaaiR′)Cl₂ (c). External addition of Cl⁻ (LiCl) and HCl suppresses the rate (Rate ∝ 1/[Cl⁻]₀ & ∝1/[HCl]₀). The reactions have been studied at different temperatures (293–308 K) and activation parameters (Δ^‡ H° and Δ ^‡ S°) of the reactions were calculated from the Eyring plot and support the proposed mechanism.     

Complexing behaviour ofN-phenylcarbamoylpyrrole-2-thiocarboxamide

Summary The complexes Pd(PTH)₂Cl₂ · 3.5 H₂O, Pd(PTH)₃(PPh₃), Ru(PTH)₂(PPh₃)Cl₂, Ru(PTH)₂(PPh₃)Cl₃, Rh(PTH)₂(PPh₃)Cl and Rh(PT)Cl₂ · 0.5 H₂O, where PTH isN-phenylcarbamoylpyrrole-2-thiocarboxamide, have been prepared and characterised by magnetic and spectral (i.r., u.v. and visible) studies.     

Rh(III), Pd(II), Pt(IV) and Au(III) complexes of 2-thiopyrimidine derivatives

Some news thiopyrimidine derivatives and complexes [4-amino-5-nitroso-6-oxo-1,2,3,6-tetrahydro-2-thio-pyrimidine (TANH), its 2-methylthio derivative (MTH), the ammonium salt ofTANH (sTANH) and six new complexes of formulas: Rh(MT)₂Cl · 2H₂O, Pd(MTH)₂Cl₂, Pt(MTH)₂Cl₄, Au(MTH)Cl₃ Pd(TANH)₂Cl₂ and Au(TAN ^–)Cl] have been synthesized and characterized by elemental analysis, IR and¹H-NMR spectroscopy techniques. The thermal behaviour of all compounds has also been studied.

---

Rh(III), Pd(II), Pt(IV) und Au(III) Komplexe von 2-Thiopyrimidin Derivaten

Zusammenfassung Es wurden einige neue Thiopyrimidinderivate und deren Komplexe synthetisiert und mittels Elementaranalyse, IR und¹H-NMR charakterisiert: 4-Amino-5-nitroso-6-oxo-1,2,3,6-tetrahydro-2-thio-pyrimidin (TANH), dessen 2-Methylthio-Derivat (MTH), das Ammoniumsalz vonTANH (sTANH) und sechs neue Komplexe der Formeln Rh(MT)₂Cl · 2H₂O, Pd(MTH)₂Cl₂, Pt(MTH)₂Cl₄, Au(MTH)Cl₃, Pd(TANH)₂Cl₂ und Au(TAN ^–)Cl. Das thermische Verhalten der Verbindungen wurde ebenfalls untersucht.

     

Synthesis of a novel bridged 2-(cyclopentadienyl)-indene system using Pd-catalyzed Negishi-type cross coupling

The palladium-catalyzed Negishi-type C-C-coupling of the nonaromatic systems 2-indenyl and cyclopentadienyl were investigated. The employed catalyst played a decisive role in product formation. Instead of Pd(PPh₃)₄, the more bulky Pd(dppf)Cl₂·CH₂Cl₂ led to the desired system in distinguished yields.     

Synthesis of regioregular poly(3‐octylthiophene)s via Suzuki polycondensation and end‐group analysis by matrix‐assisted laser desorption/ionization time‐of‐flight mass spectrometry

Regioregular poly(3‐octylthiophene)s were synthesized through a palladium‐catalyzed Suzuki polycondensation of 2‐(5‐iodo‐4‐octyl‐2‐thienyl)‐4,4,5,5‐tetramethyl‐1,3,2‐dioxaborolane. The effects of the palladium catalyst {tetrakis(triphenylphosphine)palladium(0) [Pd(PPh₃)₄], palladium(II) acetate [Pd(OAc)₂], [1, 1′‐bis(diphenylphosphino)ferrocene]dichloropalladium(II) [Pd(dppf)Cl₂], tris(dibenzylideneacetone)dipalladium(0), or bis(triphenylphosphine)palladium(II) dichloride [Pd(PPh₃)₂Cl₂]} and the reaction conditions (bases and solvents) were investigated. NMR spectroscopy revealed that poly(3‐octylthiophene)s prepared via this route were essentially regioregular. According to size exclusion chromatography, the highest molecular weights were obtained with in situ generated Pd(PPh₃)₄ and tetrakis(tri‐o‐tolylphosphine]palladium(0) {Pd[P(o‐Tol)₃]₄} catalysts or more reactive, phosphine‐free Pd(OAc)₂. Matrix‐assisted laser desorption/ionization time‐of‐flight mass spectrometry was used to analyze end groups and allowed the determination of some mechanistic aspects of the Suzuki polycondensation. The polymers were commonly terminated with hydrogen or iodine as a result of deboronation and some deiodination. Pd(PPh₃)₄, Pd(PPh₃)₂Cl₂, and Pd[P(o‐Tol)₃]₄ induced aryl–aryl exchange reactions with the palladium center and resulted in some chains having phenyl‐ and o‐tolyl‐capped chain ends. Pd(dppf)Cl₂ yielded only one type of chain, and it had hydrogen end groups. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 1454–1462, 2005     

Synthesis, Stability, and Photoluminescence Properties of PdAu10(PPh3)8Cl2 Clusters

We report on the synthesis, stability, and photoluminescence (PL) properties of triphenylphosphine (PPh₃)-stabilized PdAu₁₀(PPh₃)₈Cl₂ cluster, which is a mono-Pd-doped cluster of the well-studied Au₁₁(PPh₃)₈Cl₂ cluster. The PdAu₁₀(PPh₃)₈Cl₂ cluster was synthesized by simultaneously reducing two different metal complexes; AuCl(PPh₃) and Pd(PPh₃)₄. Experimental evaluation of the stability showed that PdAu₁₀(PPh₃)₈Cl₂ is more stable against degradation in solution than the monometal Au₁₁(PPh₃)₈Cl₂ cluster. PL measurements revealed that PdAu₁₀(PPh₃)₈Cl₂ exhibits PL at 950?nm with a quantum yield of 1.5?×?10^?3, which has not been observed for the monometal Au₁₁(PPh₃)₈Cl₂ cluster. The results indicate that Pd doping is a powerful method to produce clusters with higher stability and different physical properties than the monometal Au:PPh₃ clusters.     

Kinetics and mechanism of cyclohexene hydrocarbomethoxylation catalyzed by a Pd(II) complex

The kinetics of cyclohexene hydrocarbomethoxylation catalyzed by the Pd(PPh₃)₂Cl₂-PPh₃-p-toluenesulfonic acid (TSA) is reported. The reaction is first-order with respect to cyclohexene and TSA and of order 0.5 with respect to Pd(PPh₃)₂Cl₂. The reaction rate as a function of CO pressure or methanol or PPh₃ concentration passes through an extremum. The chloride anion inhibits the reaction. A mechanism involving cationic hydride complexes as intermediates is suggested. A rate equation is set up by the quasi-steady-state treatment of experimental data.     

Binuclear hydroxo-monopentahalophenyl complexes of palladium(II)

The novel binuclear hydroxo-bridged complexes trans-[R(PPh₃)Pd(μ-OH)₂Pd(PPh₃)R] and cis-[R(PPh₃)Pd(μ-OH)(μ-pz)Pd(PPh₃)R] (R = C₆F₅ or C₆Cl₅; pz = pyrazolate) have been prepared, and their structures assigned on the basis of NMR data.     

Metal Complexes of Biologically Important Ligands,CLXXVII. Dichlorido Platinum(II) and Palladium(II) Complexes with Long Chain Amino Acids and Amino Acid Amides

The synthesis of Cl₂Pt[NH₂(CH₂)_nCOOH]₂ (n = 5, 10) and the reactions of their carboxylic groups with H₂N(CH₂)₁₇CH₃, d ‐glucosamine, and (R,R)‐1,2‐diaminocyclohexane to give complexes with amino acid amides as ligands, are reported. Cl₂Pd(histidine) is coupled with amino alcohols to give Cl₂Pd(histidineamide) complexes.     

Pd-catalyzed selective tandem arylation-alkylation of 1,1-dihalo-1-alkenes with aryl- and alkylzinc derivatives to produce α-alkyl-substituted styrene derivatives

Trans-selective monoarylation of 1,1-dibromo- and 1,1-dichloro-1-alkenes (1) can be achieved in >80% yields and in ≥98-99% stereoselectivity with arylzinc bromides in the presence of a catalytic amount of Cl₂Pd(DPEphos) or Cl₂Pd(dppb), the former permitting cleaner and higher yielding reactions. Although THF is a generally satisfactory solvent, ether and toluene are superior to THF in some cases. The second substitution of (Z)-α-bromostyrenes (3) with alkylzincs in the presence of 2 mol% of Pd(^tBu₃P)₂ proceeds to give the corresponding 2 in >90% yields and in ≥98-99% stereoselectivity. Although somewhat less satisfactory, the use of Cl₂Pd(DPEphos) permits a one-pot tandem arylation-alkylation.     

Palladium(II)‐ und Platin(II)‐Komplexe mit dem Antimalariamittel Mefloquin als Liganden

Metal Complexes of Biologically Important Ligands. CXXVI. Palladium(II) and Platinum(II) Complexes with the Antimalarial Drug Mefloquine as Ligand The coordination sites of the antimalarial drug mefloquine (L) were studied. Reactions of the chloro bridged complexes (allyl)Pd(μ‐Cl)₂Pd(allyl) and (R₃P)(Cl)M(μ‐Cl)₂M(Cl)(PR₃) (M = Pd, Pt) with racemic mefloquine give the compounds (allyl)(Cl)Pd(L) ( 1 ), Cl₂(Et₃P)Pt(L) ( 2 ) and Cl₂(Et₃P)Pd(L) ( 3 ) with coordination of the piperidine N atom of mefloquine. In the presence of NaOMe the N,O‐chelate complexes Cl(Et₃P)Pt(L–H⁺) ( 4 ) and Cl(R₃P)Pd(L–H⁺) ( 5 , 6 , R = Et, nBu) were obtained. Protection of the piperidine N atom of mefloquine by protonation allows the synthesis of the complexes Cl₂(Et₃P)Pt(L + H⁺) ( 7 ) in which mefloquine is coordinated via the quinoline N atom. The structures of 2 , 3 and 4 were determined by X‐ray diffraction analysis. In the crystal of 4 pairs of enantiomers are found which are linked by two hydrogen bridges between the amine group and the chloro ligand.     

Preparation and properties of novel palladium compounds containing a thiomethoxymethyl group

Oxidative addition of chloromethyl methyl sulfide to Pd(Ph₃P)₄ provided a good yield of Pd(Ph₃P)₂(CH₂SCH₃)Cl (I) whose ¹H NMR and molecular weight data showed that dissociation of either the phosphine or the chloride ligand occurs in CH₂Cl₂ solution. In accord with such equilibria, repeated crystallization of I from CH₂Cl₂ and Et₂O gradually removed the triphenylphosphine set free in these solvents to give the monomeric complex. Pd(Ph₃P)(CH₂SCH₃)Cl (III), while treatment of 1 with NH₄PF₆ in CH₂Cl₂ and acetone gave the cationic complex [Pd(Ph₃P)₂(CH₂SCH₃]PF₆ (II),¹H NMR spectra of II and III are discussed in terms of a three-membered chelate structure arising from coordination of sulfur with palladium     

Recovery of palladium from spent solutions for manufacture of catalysts

Palladium recovery from [Pd(NH₃)₄]Cl₂ solutions (concentration in terms of the metal ∼1 g l⁻¹) with flow-through porous electrodes was studied. The conditions of effective electrochemical recovery of Pd were found. Various porous cathodes were compared.     

Synthesis of fused dihydropyrido[e]purines via ring closing metathesis

Ring closing metathesis (RCM) of 8,9-diallylpurines or 9-butenyl-8-vinylpurines with the Grubbs 2nd generation catalyst resulted in fused 6,9- or 8,9-dihydropyrido[e]purines, respectively. The 8,9-dialkenylpurines were prepared from 8-bromopurines after 9-alkenylation and subsequent Stille coupling at C-8 with alkenylstannanes in the presence of Pd(PPh₃)₄ or Pd(PPh₃)₂Cl₂.     

Mono-Sulfonated Derivatives of Triphenylphosphine, [NH4]TPPMS and M(TPPMS)2 (TPPMS = P(Ph)2(m-C6H4SO− 3); M = Mn2+, Fe2+, Co2+ and Ni2+). Crystal Structure Determinations for [NH4][TPPMS]·½H2O, [Fe(H2O)5(TPPMS)]TPPMS, [Co(H2O)5TPPMS]TPPMS and [Ni(H2O)6](TPPMS)4·H2O

Preparation of the ammonium salt of TPPMS, [NH₄]TPPMS, TPPMS = PPh₂(m-C₆H₄SO^? ₃), greatly enhances water solubility and provides an efficient route to other metal complexes of TPPMS, M(TPPMS)₂ M = Mn²⁺, Co²⁺, Fe²⁺ and Ni²⁺. For Co²⁺ and Fe²⁺ the metal has an octahedral ligand environment with five water molecules and one TPPMS coordinated through the sulfonate oxygen; the second TPPMS is not coordinated. For Ni²⁺ the octahedral coordination sphere is composed of water molecules and the TPPMS ligands are not coordinated. Structures are fully reported for [NH₄]TPPMS·½H₂O and [Fe(H₂O)₅(TPPMS)]TPPMS and partially reported for [Co(H₂O)₅TPPMS]TPPMS and [Ni(H₂O)₆]TPPMS₂·H₂O. All of the structures show hydrophobic regions consisting of aromatic rings and hydrophilic regions with hydrogen-bonding interactions.