Determination of Hydrocortisone in Cosmetics by CdSe/CdS Quantum Dots-Based Fluoroimmunoassay Using Magnetic Fe3O4/Au Nanoparticles as Solid Carriers

This work demonstrated the feasibility of detecting hydrocortisone in cosmetics using a novel CdSe/CdS quantum dots‐based competitive fluoroimmunoassay with magnetic core/shell Fe₃O₄/Au nanoparticles (MCFN) as solid carriers. Hydrocortisone antigen was labeled with the synthesized core/shell CdSe/CdS quantum dots (QDs) to form the antigen‐QDs conjugate. Meanwhile, hydrocortisone antibody was incubated with MCFN and the immobilized antibody was obtained. The immobilized antibody was then mixed sequentially with hydrocortisone and a slightly excess amount of the QDs‐labeled hydrocortisone antigen, allowing their competition for binding with the antibody immobilized on MCFN. The bound hydrocortisone and the antigen‐QDs conjugates on MCFN were removed subsequently after the mixture was applied to a magnetic force. The analyte concentration was obtained by measuring the fluorescence intensity of the unbound hydrocortisone antigen‐QDs conjugates. The proposed method was characterized by simplicity, rapidity, and high sensitivity with a wide linear working range of 0.5 to 15000 pg·mL^?1 and a low detection limit of 0.5 pg·mL^?1. The proposed method was successfully applied to the determination of hydrocortisone in cosmetics with satisfactory results.     

Design,Synthesis and Biological Evaluation of Novel N‐(4‐([2,2′:5′,2′′‐Terthiophen]‐5‐yl)‐2‐methylbut‐3‐yn‐2‐yl) Benzamide Derivatives

On the basis of the principle of combination of active groups, a series of novel N‐(4‐([2,2′:5′,2′′‐terthiophen]‐5‐yl)‐2‐methylbut‐3‐yn‐2‐yl) benzamide derivatives were designed, synthesized and systematically evaluated for their antiviral activity against tobacco mosaic virus (TMV). The bioassay results showed that most of these compounds displayed good anti‐TMV activity, and some of them exhibited higher antiviral activity than commercial Ningnanmycin. Especially, compound 8e with excellent anti‐TMV activity (inactivation activity, 92.3%/500 µg·mL^?1; curative activity, 85.7%/500 µg·mL^?1 and protection activity, 64.7%/500 µg·mL^?1) emerged as a potential inhibitor of plant virus TMV. Quantitative structure‐activity relationship studies proved that the van der Waals volume (V) and electronic parameter (∑(∑σ_o+σ_p) and ∑σ_m) for the substituent R¹ were very important for antiviral activities in this class of compounds.     

Spectrofluorimetric and Spectrophotometric Stability‐Indicating Methods for the Analysis of Veralipride in Presence of Its Degradants and in Spiked Human Plasma

Spectrofluorimetric and spectrophotometric stability‐indicating methods were developed and validated for analysis of veralipride (Ver) in presence of its hydrolytic and oxidative degradants. The spectrofluorimetric method was based on direct measurement of the intrinsic fluorescence of Ver at 366 nm after excitation at 299 nm using sodium lauryl sulfate (SLS) as micelle enhancer. The fluorescence intensity plot was linear over the concentration range 1.0–10.0 µg·mL^?1. The high sensitivity of the method allowed its successful application to the analysis of Ver in spiked human plasma. Two other methods were developed. They are based on the oxidative coupling reaction of Ver with 3‐methyl benzothiazolin‐2‐one hydrazone (MBTH) hydrochloride in presence of ceric ammonium sulphate in an acidic medium. The first method depends on spectrophotometric measurement of the stable green colored oxidative coupling product at 660 nm. The different experimental parameters affecting the reaction were optimized. Linearity range is 10.0–100.0 µg·mL^?1. The second method depends on a fluorescence quenching effect of Ver on the fluorescence of Ce³⁺. The difference in fluorescence intensity was measured at 380 nm after excitation at 300 nm. This method is applicable over the concentration ranges 0.25–2.50 µg·mL^?1. The methods were validated according to the ICH guidelines. They were successfully applied for the analysis of Ver in drug substance, drug product and in laboratory prepared mixtures containing different percentages of hydrolytic and oxidative degradants.     

Chemical composition and antibacterial activity of Tussilago farfara (L.) essential oil from Quebec,Canada

Abstract

The chemical composition of Tussilago farfara L. essential oil from the Saguenay-Lac-St-Jean region of Quebec, Canada was analyzed by gas chromatography–flame ionisation detector (GC-FID) and gas chromatography–mass spectrometry (GC-MS), and the antibacterial activity of the oil was tested against Escherichia coli and Staphylococcus aureus. Forty-five (45) compounds were identified from the GC profile. The main components were 1-nonene (40.1%), α-phellandrene (26.0%) and ρ-cymene (6.6%). The essential oil demonstrated antibacterial activity against E. coli (MIC₅₀ = 468 µg·mL^?1; MIC₉₀ = 6869 µg·mL^?1) and S. aureus (MIC₅₀ = 368 µg·mL^?1; MIC₉₀ = 773 µg·mL^?1). Dodecanoic acid was found to be active against both bacteria having a MIC₅₀ and MIC₉₀ of 16.4 µg·mL^?1 and 95 µg·mL^?1, respectively for E. coli and a MIC₅₀ and MIC₉₀ of 9.8 µg·mL^?1 and 27.3 µg·mL^?1, respectively for S. aureus. In addition, 1-decene and (E)-cyclodecene were also found to be active against E. coli.     

Voltammetric Determination of Rosiglitazone in Pharmaceutical Preparations and Human Plasma

Abstract

The voltammetric behavior of rosiglitazone was studied using direct current (DC_t), differential pulse (DPP), and alternating current (AC_t) polarography. The drug manifests cathodic waves over a pH range of 2–11.2. In Britton‐Robinson buffer (BRb; pH 4), the diffusion current–concentration relationship was found to be rectilinear over a range of 4–24 µg · mL^?1 and 0.1–16 µg · mL^?1 using DC_t and DPP modes, respectively, with minimum limits of detection (LOD) of 0.15 µg · mL^?1 and 0.07 µg · mL^?1 using the DC_t and DDP modes, respectively. The diffusion‐current constant (I _d) was 6.63±0.03 (n=5). The proposed method was successfully applied to the determination of the studied compound both in pure form and in formulations. The mean percentage recoveries in tablets were 100.09±1.18 and 100.85±0.88 (n=5) using DC_t and DPP modes, respectively. Furthermore, the proposed method, adopting the DPP mode, was applied to the determination of rosiglitazone in spiked human plasma and the obtained mean percentage recoveries were 99.14±3.29 (n=4).     

钯（II）-克林霉素-卤代荧光素体系的共振瑞丽散射光谱及其分析应用

在pH为5.0-5.4的乙酸-乙酸钠缓冲溶液中,克林霉素（Clin）与钯(Ⅱ)形成螯合阳离子,它能进一步与二碘荧光素（DIF）,赤藓红（Ery）,曙红Y（EY）等卤代荧光素类染料反应形成1：1：1的三元离子缔合物,此时将引起吸收光谱变化和荧光猝灭,同时还导致共振瑞利散射(RRS)的急剧增强并产生新的RRS光谱,钯(Ⅱ)-克林霉素与DIF,Ery和EY形成产物的最大散射波长分别位于285,287,32 1nm处,另外还有些较弱的散射峰存在。散射增强（ΔI）与克林霉素浓度在一定范围内成正比,可用于克林霉素的定量测定。对于DIF,Ery和EY体系的线性范围和检出限分别为0.025-2.1μg•mL-1和7.8 ng•mL-1,0.053-2.4μg•mL-1和16.0 ng•mL-1;以及0.038-2.4μg•mL-1和11.0 ng•mL-1。本文研究了适宜的反应条件,考察了共存物质的影响,表明方法有较好的选择性,基于三元离子缔合物的RRS光谱,发展了一种高灵敏、简便快速测定克林霉素的新方法。文中还对离子缔合物的组成,结构和反应机理,以及离子缔合物对吸收,荧光和RRS光谱的影响进行了讨论。     

N‐(Substituted benzyl)‐3,5‐bis(benzylidene)‐4‐piperidones: Synthesis and Preliminary Anti‐leukemia Activity (I)

A series of novel N‐(substituted benzyl)‐3,5‐bis(benzylidene)‐4‐piperidones 5a – 5o were synthesized with substituted benzylamines as raw materials via a series of Michael addition, Dieckmann condensation, hydrolysis decarboxylation and aldol condensation. The structures were confirmed by ¹H NMR, IR, MS techniques and elemental analysis. Assay‐based antiproliferative activity study using leukemic cell lines K562 revealed that most of the title compounds have high effectiveness in inhibiting leukemia K562 cells proliferation, among which the compounds 5g (IC₅₀=7.81 µg·mL⁻¹), 5k (IC₅₀=6.35 µg·mL⁻¹), 5l (IC₅₀=7.20 µg·mL⁻¹), and 5o (IC₅₀=5.79 µg·mL⁻¹) have better inhibition activities than standard 5‐fluorouracil (IC₅₀=8.56 µg·mL⁻¹).     

A Spectrophotometric Study of Streptomycin Effect on the Clinical Urea Determination

The results of studying inhibitory effect of streptomycin on the modified Berthelot reaction were presented in this paper and a new kinetic method for determining streptomycin in pharmaceutical preparations and human urine was developed on the basis of the obtained results. The rates of catalytic and catalytic‐inhibitory reaction were monitored at 700 nm (t=25±0.1°C) using UV/vis spectrophotometer. By analyzing the spectra and experimental dependences of the catalytic and catalytic‐inhibitory reaction rates on the reactant concentrations, it was noticed that streptomycin attacked nitroprusside and hypochlorite causing the inhibition of the production of 2,2′‐dicarboxylindophenol. According to this effect, an analytical decrease for determination of urea by modified Berthelot reaction appeared in the presence of small amounts of streptomycin. Beer's law was obeyed in the interval of streptomycin sulfate concentration from 18.2 to 182 µg·mL^?1. The detection limit calculated by two methods was obtained at 11.75 µg·mL^?1 and 8.54 µg·mL^?1. The relative standard deviation of 0.55%–8.83% and the recovery of 109.10% were determined. The obtained results were validated using the referent HPLC method.     

Determination of Potassium Ferrocyanide in Foods by Resonance Rayleigh Scattering Method with Double-Charged Triaminotriphenylmethane Dyes

In pH 1.0 acidic medium, double-charged triaminotriphenylmethane dyes such as methyl green （MEG） and iodine green （IG） react with potassium ferrocyanide to form 2 ： 1 ion-association complexes by virtue of electrostatic forces and hydrophobic interaction. It results in the change of absorption and the great enhancement of resonance Rayleigh scattering （RRS） and the appearance of new RRS spectra. Two systems have similar spectral characteristics and their maximum RRS wavelengths are all located at 276 nm and smaller peaks are located at 332 and 457 nm, respectively. The intensity of RRS is directly proportional to the concentration of [Fe（CN）6]^4- in the range of 0.03-5.7 μg·mL^-1 （MeG system） or 0.04-5.9 μg·mL^-1 （IG system）. The RRS method has high sensitivity and the detection limit （3σ） for potassium ferrocyanide is 9.3 ng·mL^-1 （MeG system） or 11.2 ng·mL^-1 （IG system）. The optimum conditions, influencing factors and effects of foreign substances are investigated. The method also has a good selectivity. A sensitive, rapid and simple RRS method for the determination of potassium ferrocyanide in salinized food and table salt has been developed.     

The Pt-free 1T/2H-MoS2/CdS/MnOx hollow core-shell nanocomposites toward overall water splitting via HER/OER synergy of 1T-MoS2/MnOx

Hydrogen evolution reaction/Oxygen evolution reaction (HER/OER) synergy would be the most important issue for overall water splitting. The Pt-free 1T/2H-MoS₂/CdS/MnO_x hollow core–shell nanocomposites are fabricated via a continuous hydrothermal–chemical method; therefore, the OER co-catalysts MnO_x and CdS shell are deposited on the surface of SiO₂ nanosphere templates continuously via hydrothermal–chemical method. Subsequently, the SiO₂ templates are etched via chemical method and the 2H-MoS₂/CdS hollow core–shell heterojunction and 1T-MoS₂ HER co-catalyst are introduced via one-step hydrothermal method. Evaluated by photocatalytic performance, the 1T/2H-MoS₂/CdS/MnO_x exhibits an enhanced HER performance of about ~50 folds than that of single CdS hollow nanosphere, and achieves a decent overall water splitting performance of about ~1668.00(H₂)/824.61(O₂) μmol/g?h, which can be mainly ascribed to the well HER/OER synergy and formation of hollow core–shell structure. Therefore, the 1T-MoS₂ with quick electron transport and decent solid/liquid interface can promote the photogenerated electron diffusing, the MnO_x with mixed Mn³⁺/Mn⁴⁺ ions can activate the hole-related species for OH^? oxidation and promote H₂O₂ decomposition, the 2H–MoS₂/CdS heterojunction can separate the charge carrier and meet the potential to achieve overall water splitting. Additionally, the 1T/2H-MoS₂ with decent lattice matching can improve the charge carrier transport, the 1T-MoS₂ with sufficient specific surface areas can increase active sites and the hollow core–shell structure can increase solar efficiency which is also beneficial for enhancing the overall water splitting performance and stability.     

Nonextractive Trace Level Simultaneous Determination of Mercury(II) and Zinc(II) in Environmental Samples with 2‐(5‐Bromo‐2‐pyridylazo)‐5‐diethylaminophenol and Cetylpyridinium Chloride

Abstract

A simple, rapid, selective, and sensitive method for the derivative spectrophotometric determination of Hg(II) and its simultaneous determination in the presence of Zn(II) using 2‐(5‐bromo‐2‐pyridylazo)‐5‐diethylaminophenol in the presence of cetylpyridinium chloride, a cationic surfactant, has been developed. The molar absorption coefficient and analytical sensitivity of the 1∶1 Hg(II) complex at 558 nm (λ_max) are 5.78×10⁴ L mol^?1 cm^?1 and 0.67 ng mL^?1, respectively. The detection limit of Hg(II) is 1.40×10^?2 ng mL^?1, and Beer's law is valid in the concentration range 0.05–2.40 µg mL^?1. Overlapping spectral profiles of Hg(II) and Zn(II) complexes in zero‐order mode interfere in their simultaneous determination. However, 0.10–2.00 µg mL^?1 of Hg(II) and 0.065–0.650 µg mL^?1 of Zn(II), when present together, can be simultaneously determined at zero cross point of the derivative spectrum, without any prior separation. The relative standard deviation for six replicate measurements of solutions containing 0.134 µg mL^?1 of Hg(II) and 0.620 µg mL^?1 of Zn(II) is 1.72 and 1.47%, respectively. The proposed method has successfully been evaluated for trace level simultaneous determination of Hg(II) and Zn(II) in environmental samples.     

Determination of Glucose by Affinity Adsorption Solid Substrate‐room Temperature Phosphorimetry Based on Triticum Vulgare Lectin Labeled with Silicon Dioxide Nanoparticle Containing Fluorescein Isothiocyanate

In the presence of heavy atom perturber Pb2＋, silicon dioxide nanoparticle containing fluorescein isothiocyanate (FITC-SiO2) could emit a strong and stable room temperature phosphorescence (RTP) signal on the surface of acetyl cellulose membrane (ACM). It was found in the research that a quantitative specific affinity adsorption (AA) reaction between triticum vulgare lectin (WGA) labeled with luminescent nanoparticle and glucose (G) could be carried on the surface of ACM. The product (WGA-G-WGA-FITC-SiO2) of the reaction could emit a stronger RTP signal, and the ΔIp had linear correlation to the content of G. According to the facts above, a new method to determine G by affinity adsorption solid substrate room temperature phosphorimetry (AA-SS-RTP) was established, based on WGA labeled with FITC-SiO2. The detection limit (LD) of this method calculated by 3Sb/k was 0.47 pg•spot－1 (corresponding to a concentration value 1.2×10－9 g•mL－1, namely 5.3×10－9 mol•L－1), the sensitivity was high. Meanwhile, the mechanism for the determination of G by AA-SS-RTP was discussed.     

Analysis of Carbamazepine in Tablet and Human Serum by Sweeping‐Micellar Electrokinetic Chromatography Method

Abstract

A sensitive and simple micellar electrokinetic chromatography (MEKC) method was developed for the determination of the antiepileptic drug carbamazepine (CBZ) using a sweeping on‐line concentration method with photodiode array detection. The effect of pH, concentration of the running buffer solution, organic modifier, applied voltage and injection time on the concentration efficiency and separation was investigated. An untreated fused‐silica capillary was used (50 cm; effective length, 40 cm, 75 µm i.d.) for the analysis. The background solution (BGS) was 50 mmol · L^?1 NaH₂PO₄ (pH 3.0) containing 100 mmol · L^?1 SDS and 20% acetonitrile (5.82 ms · cm^?1) with an applied voltage of ?20 kV at 25°C. Sample introduction was performed at 0.5 psi for 90 s with diode array detection at 214 nm. For the method, the calibration curve was linear over a range of 0.5–40 µg · mL^?1 for CBZ with a correlation coefficient of 0.998. The detection limit (S/N=3∶1) of CBZ was 0.10 µg · mL^?1. About 100‐fold improvement in concentration sensitivity was achieved in terms of peak height by the sweeping method compared to conventional injection method. The sweeping‐MEKC method has been successfully applied to the analysis of CBZ in tablet and human serum.     

In-vivo fluorescence imaging technique using colloid solution of multiple quantum dots/silica/poly(ethylene glycol) nanoparticles

This paper describes a method for producing silica particles containing multiple quantum dots (QD/SiO₂), a method for surface-modifying the particles with poly(ethylene glycol) (QD/SiO₂/PEG), and an in vivo fluorescence imaging technique using colloid solution of the QD/SiO₂/PEG particles. The QDs used were ZnS-coated CdSe_xTe_1?x nanoparticles surface-modified with carboxyl groups, and had an average size of 10.3 ± 2.1 nm. The QD/SiO₂ particles were fabricated by performing sol–gel reaction of tetraethyl orthosilicate using NaOH as a catalyst in the presence of the QDs. The produced particles formed core–shell structure composed of multiple QDs and silica shell, and had an average size of 50.2 ± 17.9 nm. Surface-modification of the QD/SiO₂ particles with PEG, or PEGylation of the particle surface, was performed by using methoxy polyethylene glycol silane. Fluorescence of QD colloid solution was not quenched even through the silica-coating and the PEGylation. Tissues of a mouse could be imaged by injecting the concentrated colloid solution into it and measuring fluorescence intensity emitted from the tissues.     

Extractive Spectrophotometric Determination of Fluconazole by Ion-pair Complex Formation with Bromocresol Green

An extraction-spectrophotometric method for the determination of trace amounts of fluconazole was described. Fluconazole was effectively extracted as a 1 ： 1 ion-pair complex with bromocresole green （BCG） at pH 3.0 into chloroform, followed by spectrophotometric determination at 420 nm. Beer＇s law was obeyed over the range of 4-50 μg.mL^-1 of fluconazole with a detection limit of 3.7 μg.mL^-1 . The method is simple, rapid and sensitive. The procedure was applied to the determination of fluconazole in pharmaceutical preparations as well as its recovery from a blood serum sample.     

N-bromosuccinimide-fluorescein system for the determination of protein by flow injection chemiluminescence

A method for flow injection with chemiluminescence (CL) detection has been developed for the determination of proteins. It is based on the luminescence of the N-bromosuccinimide-fluorescein-protein system, where fluorescein is used as an energy transfer reagent in alkaline medium. The CL of the system is strongly enhanced by hexadecyl trimethyl ammonium bromide. Optimum conditions and possible mechanisms have been investigated. Under optimum experimental conditions, the linear range is from 0.4 to 40 µg·mL^?1 for egg albumin, 0.2 to 20 µg·mL^?1 for bovine serum albumin, and from 1 to 100 µg·mL^?1 for bovine hemoglobin. The detection limits are 37, 62, and 240 ng·mL^?1, respectively.     

A Novel Fluorescence Quenching Method for the Determination of Aloe Polysaccharide

Alizarin red (AR) can bind with aloe polysaccharide (APS) in doubly de‐ionized water to form a red complex resulting in fluorescence quenching of it. The maximum fluorescence quenching wavelength is 572 nm. The chromogenic reaction is rapid and the fluorescence intensity remains stable for at least 2 h at room temperature. The quenched fluorescence intensity (ΔF) is directly proportional to APS concentration. Based on this interaction, a sensitive and selective fluorophotometric method is proposed for the determination of APS. The optimal experiment conditions were established. The corresponding linear equation is (F=0.8807C+1.8132, R²=0.9999. The quantification and detection limits are 0.4752 and 0.1425 µg·mL^?1, respectively. The linear range is 0.444–16.65 µg·mL^?1 for APS and the mean recovery (100.2±2)%, RSD?3%. The effect of various substances on the determination of APS was also investigated in detail, and the results show that most of the studied coexistent substances can be tolerated in considerable amounts. The proposed method is sensitive, simple, fast and suitable for routine assay.     

Improved Multianalyte Determination of the Intense Sweeteners Aspartame and Acesulfame‐K with a Solid Sensing Zone Implemented in an FIA Scheme

Abstract

A multianalyte flow‐through sensor is proposed for the simultaneous determination of aspartame (AS) and acesulfame‐K (AK) in tabletop sweeteners. The procedure is based on the transient retention of AK in the ion exchanger Sephadex DEAE A‐25 placed in the flow‐through cell of a monochannel flow injection analysis (FIA) set‐up using pH 2.70 ortophosphoric acid/sodium dihydrogen phosphate buffer 0.06 M as carrier. In these conditions AS is very weakly retained, which makes it possible to measure the intrinsic ultraviolet (UV) absorbance of first AS and then AK after desorption by the carrier itself. The applicable concentration range, the detection limit, and the relative standard deviation were the following: for AS, from 10 to 100 µg mL^?1; 5.65 µg mL^?1; 3.4% (at 50 µg mL^?1); and for AK, between 40 and 100 µg mL^?1; 11.9 µg mL^?1 and 1.61% (at 50 µg mL^?1). The method was applied and validated satisfactorily for the determination of AS and AK blends in tabletop sweeteners. The results were compared against an HPLC reference method.     

Study on the Interaction between a Novel Ionic Liquid Probe and Anionic Surfactants Using Resonance Light Scattering Spectra and Its Analytical Application

The interaction between anionic surfactants (AS) and 1‐hexadecyl‐3‐methylimidazolium bromide [C₁₆mim]Br was studied by using resonance light scattering (RLS) technique, UV‐Vis spectrophotometry and fluorometric methods. In Britton Robinson (BR) buffer (pH 6.0), [C₁₆mim]Br reacted with AS to form supermolecular complex which resulted in enhancement in RLS intensity. Their maximum RLS wavelengths were all at 390 nm. Some important interacting experimental variables, such as the solution acidity, [C₁₆mim]Br concentration, salt effect and addition order of the reagents, were investigated and optimized. Under the optimum conditions, quantitative determination ranges were 0.001–7 μg·mL^?1 for dodecyl sodium sulfate (SDS), 0.001–6 μg·mL^?1 for sodium dodecylbenzene sulfonate (SDBS) and 0.005–7 μg·mL^?1 for sodium lauryl sulfonate (SLS), respectively, while the detection limits were 1.3 ng·mL^?1 for SDS, 1.0 ng·mL^?1 for SDBS and 5.1 ng·mL^?1 for SLS, respectively. Based on the ion‐association reaction, a highly sensitive, simple and rapid method has been established for the determination of AS.