Synthesis and scintillating efficiencies of 4-functionalised-2,5-diphenyloxazoles

A series of 4-functionalised-2,5-diphenyloxazoles has been synthesised. Each member of the series has been assessed for the ability to scintillate in the presence of ionising radiation. The scintillation counting efficiency of each member of the series has been determined relative to 2,5-diphenyloxazole, a widely used scintillant molecule.     

Palladium-catalyzed sequential alkylation-alkenylation reactions. Application to the synthesis of 2-substituted-4-benzoxepines and 2,5-disubstituted-4-benzoxepines

The synthesis of 2-substituted-4-benzoxepines and 2,5-disubstituted-4-benzoxepines from aryl iodides and bromoenoates is described. This methodology is based on a palladium-catalyzed aromatic substitution followed by an intramolecular Heck sequence. Under the reaction conditions (Pd(OAc)(2) (10 mol %), tri-2-furylphosphine (20 mol %), norbornene (2 equiv), Cs(2)CO(3) (2 equiv), CH(3)CN, 85 degrees C), moderate to excellent yields of benzoxepines bearing numerous substituents (Me, F, Cl, etc.) are obtained.     

The application of non-cross-linked polystyrene-supported triphenylarsine in Stille coupling reactions

NCPS-AsPh₃ is a soluble polymer-supported triphenylarsine that performed equally well compared to free triphenylarsine as ligands in the Stille cross-coupling reaction of organic electrophiles and organostannanes, with the advantage that it can be conveniently and efficiently separated from the reaction by precipitation, and recycled for further use. The performance of this non-cross-linked polystyrene-supported arsine was found to be generally superior in Stille coupling reactions over the analogous polymer-supported phosphine, paralleling observations on the free ligands. Palladium-catalyzed modification of the polymer-supported arsine was possible through Pd-Ar/As-Ph exchange. Exploiting the ease of isolation of the polymer-supported reagent, the modified arsine is recycled for reuse in the Stille reaction and has led to a reduction in the yield of undesired scrambling products.     

Short communication: Stille coupling reactions of functionalized triorganotin halides

Convenient conditions for the Stille coupling of halide‐bearing triorganotin compounds, which do not normally react under typical Stille reaction conditions, are presented. The coupling of vinylstannanes with allyl bromide using palladium(II) catalysis is accomplished under fluoride assistance to give the substituted 2,5‐hexadien‐1‐ols in Z‐configuration. Copyright © 2004 John Wiley & Sons, Ltd.     

Stille coupling reactions catalysed by a polymer supported palladium complex

The coupling between aryl iodides and bromides with organostannanes (Stille reaction) has been investigated in the presence of a polymer supported palladium catalyst. The reaction could be performed in air without any activating ligand and with non-dried solvents. The catalyst, which acts by releasing controlled amounts of soluble active species, could be recycled several times in the coupling between Sn(CH₃)₄ or ⁿBu₃SnPh with iodoarenes or activated bromoarenes.     

Regioselectivity in the Stille coupling reactions of 3,5-dibromo-2-pyrone

The Stille couplings of 3,5-dibromo-2-pyrone normally take place regioselectively at C3, lower in electron density than C5, thus oxidative addition proceeds faster . When the reactions are carried out with Cu(I) in DMF or other polar aprotic solvent, however, the couplings occur predominantly at C5. The observed regiochemical reversal is attributed to the preferred formation of 5-pallado-2-pyrone intermediate which, in addition, turned out to be more reactive than 3-pallado-2-pyrone intermediate.     

Preparation and spectra of para-substituted 2,5-diphenyloxazoles

2,5 Diaryloxazoles, with the 2-, and 5-aryl groups, substituted in the para position by halo, methyl, methoxy or nitro groups were obtained by the Friedel-Crafts reaction of p-substituted hippuric acid azlactones with benzene, or the hippuric acid azlactone with halobenzenes, toluene, and anisole, followed by treatment with phosphorus oxychloride. Grignard and Ullmann reactions of p-halo-substituted 2,5-diaryloxazoles are described. Absorption spectra of these compounds are discussed and the pronounced bathochromic effect of coupled donor and acceptor groups in both para positions is accounted for by a simple MO treatment.     

Synthesis of asymmetric 3,5-diaryl-4H-1,2,6-thiadiazin-4-ones via Suzuki–Miyaura and Stille coupling reactions

Asymmetric 3,5-diaryl substituted 4H-1,2,6-thiadiazin-4-ones can be prepared from 3,5-dichloro-4H-1,2,6-thiadiazin-4-one (1) via a multi-step protocol: selective nucleophilic mono-chloro substitution gives either the mono-methoxy or benzyloxy substituted mono-chlorothiadiazinones that can be phenylated via Suzuki–Miyaura coupling. Subsequent BBr₃ mediated dealkylation gives 3-hydroxy-5-phenyl-4H-1,2,6-thiadiazin-4-one (9) that can be activated by a modified Finkelstein halodehydroxylation via the triflate, enabling further arylation reactions using Suzuki–Miyaura or Stille coupling chemistry.     

Selective Stille coupling reactions of 3-chloro-5-halo(pseudohalo)-4H-1,2,6-thiadiazin-4-ones

A series of 3-chloro-5-halo(pseudohalo)-4H-1,2,6-thiadiazin-4-ones (halo/pseudohalo = Br, I, OTf) are prepared from 3,5-dichloro-4H-1,2,6-thiadiazin-4-one (3) in good yields. Of these the triflate reacts with tributyltin arenes (Stille couplings) chemoselectively to give only the 5-aryl-3-chloro-4H-1,2,6-thiadiazin-4-ones in high yields. This allowed the preparation of a series of unsymmetrical biaryl thiadiazines and ultimately a series of oligomers. Furthermore, treatment of 3-chloro-5-iodo-4H-1,2,6-thiadiazin-4-one (10) with Bu(3)SnH and Pd(OAc)(2) gave the bithiadiazinone which can also be further arylated via the Stille reaction to give bisthien-2-yl and bis(N-methylpyrrol-2-yl) analogs.     

Synthesis of novel 1,4,5-trisubstituted 3-trifluoromethylpyrazoles via microwave-assisted Stille coupling reactions

1,5-Disubstituted 3-trifluoromethylpyrazoles were reacted with N-bromosuccinimide in DMF at room temperature or 70-80 °C for 1-2 h to afford the corresponding 4-bromo-substituted pyrazoles 2 in 95-99% yields. The microwave-assisted Stille coupling reactions of 2 with arylstannanes having a substituent on the benzene ring and allylstannane in refluxing CH₃CN in the presence of Pd(PPh₃)₄ provided the corresponding 1,4,5-trisubstituted 3-trifluoromethylpyrazoles 3 in 75-98% yields.     

Carbonylative Stille coupling reactions of benzyl chlorides with allyltributylstannane catalyzed by palladium nanoparticles

The carbonylative Stille coupling reaction of benzyl chlorides with allyltributylstannane was successfully conducted by using palladium nanoparticles as the catalyst under phosphine ligand-free conditions. The corresponding α,β-unsaturated ketone products were obtained in good to excellent yields.     

Isolable C@Fe3O4 nanospheres supported cubical Pd nanoparticles as reusable catalysts for Stille and Mizoroki-Heck coupling reactions

Cubical Pd nanoparticles incorporated magnetic nanospheres (Pd cNPs/C@Fe₃O₄) are found to be efficient catalysts for Stille and Mizoroki-Heck coupling reactions. A variety of aryl halides, including chlorides, are converted to biaryls and diphenylethenes with excellent yield and high TON. This immobilization of Pd cNPs on the surface C@Fe₃O₄ results in structurally stable catalytic sites. The observed enhanced catalytic activity is attributed to the high density of low-coordinated Pd {1 0 0} atoms present at the surface of the Pd cNPs/C@Fe₃O₄ catalyst. The advantages of the proposed catalytic system are its heterogeneity, high stability, absence of any toxic ligands, gram scale applicability, magnetic separability and consequent reusability.     

Stille coupling of stereochemically defined alpha-sulfonamidoorganostannanes

Addition of tributylstannylmetallics to (R)-tert-butanesulfonimine derivatives of arylaldehydes provides alpha-sulfinamidostannanes with high (>98% de) diastereoselectivities. Oxidation of these compounds with m-CPBA gives alpha-sulfonamidostannanes which undergo Pd/Cu-catalyzed Stille-type couplings with benzoyl chloride. Best yields are achieved using the electron-rich tris(2,4,6-trimethoxyphenyl)phosphine as the ligand. Inversion of configuration at the benzylic carbon is observed.     

A conveneint synthesis of 1-substituted-2,5(4H)-piperazinediones

1-Substituted-2,5(4H)-piperazinediones are prepared by the Michael addition of acrylonitrile and methyl-acrylate and glycylglycine, DL-alanyl-DL-alanine and DL-alanyl-DL-phenylalanine followed by cyclohydration in refluxing xylenes.     

Palladium on charcoal-catalyzed ligand-free Stille coupling

An efficient ligand-free Stille coupling reaction catalyzed by palladium on charcoal was developed. Tetraphenyltin was reacted with a variety of aryl halides including aryl chlorides using LiCl as an additive. The reactions of tributyl organotin compounds with aryl iodides were effectively expedited by the addition of LiF. These reactions efficiently proceeded without a phosphine or arsenic ligand and no leached palladium was detected in the reaction mixture.     

The hydrolysis of 4-acyloxy-4-substituted-2,5-cyclohexadienones: limitations of aryloxenium ion chemistry

The title compounds serve as potential precursors to aryloxenium ions, often proposed, but primarily uncharacterized intermediates in phenol oxidations. The uncatalyzed and acid-catalyzed decomposition of 4-acetoxy-4-phenyl-2,5-cyclohexadienone, 2a, generates the quinol, 3a. (18)O-Labeling studies performed in (18)O-H(2)O, and monitored by LC/MS and (13)C NMR spectroscopy that can detect (18)O-induced chemical shifts on (13)C resonances, show that 3a was generated in both the uncatalyzed and acid-catalyzed reactions by C(alkyl)-O bond cleavage consistent with formation of an aryloxenium ion. Trapping with N(3)(-) and Br(-) confirms that both uncatalyzed and acid-catalyzed decompositions occur by rate-limiting ionization to form the 4-biphenylyloxenium ion, 1a. This ion has a shorter lifetime in H(2)O than the corresponding nitrenium ion, 7a (12 ns for 1a, 300 ns for 7a at 30 degrees C). Similar analyses of the product, 3b, of acid- and base-catalyzed decomposition of 4-acetoxy-4-methyl-2,5-cyclohexadienone, 2b, in (18)O-H(2)O show that these reactions are ester hydrolyses that proceed by C(acyl)-O bond cleavage processes not involving the p-tolyloxenium ion, 1b. Uncatalyzed decomposition of the more reactive 4-dichloroacetoxy-4-methyl-2,5-cyclohexadienone, 2b', is also an ester hydrolysis, but 2b' undergoes a kinetically second-order reaction with N(3)(-) that generates an oxenium ion-like substitution product by an apparent S(N)2'mechanism. Estimates based on the lifetimes of 1a, 7a, and the p-tolylnitrenium ion, 7b, and the calculated relative stabilities of these ions toward hydration indicate that the aqueous solution lifetime of 1b is ca. 3-5 ps. Simple 4-alkyl substituted aryloxenium ions are apparently not stable enough in aqueous solution to be competitively trapped by nonsolvent nucleophiles.     

Gas-phase elimination reactions of 4-substituted-2-alkoxythiazoline-5-ones

Gas-phase eliminations of 4-substituted-2-alkoxythiazoline-5-ones have been studied. These compounds eliminate via a six-membered transition state to produce 4-substituted-thiazolidine-2,5-diones. These eliminations are unimolecular first-order reactions. Utilization of this thermolysis reaction in the synthesis of new 4-substituted-thiazolidine-2,5-diones is considered. Additional mechanistic information was obtained by comparing the kinetic data for thermal elimination reactions of these compounds with that of 1-ethoxythiazole. © 1996 John Wiley & Sons, Inc.     

Stille coupling reactions in the synthesis of hypoxia-selective 3-alkyl-1,2,4-benzotriazine 1,4-dioxide anticancer agents

The introduction of a 3-alkyl substituent is a key step in the synthesis of 1,2,4-benzotriazine 1,4-dioxide hypoxia-selective anticancer agents, such as SN29751. The Stille reaction of 3-chloro-1,2,4-benzotriazine 1-oxides (BTOs) 5 was inhibited by the presence of electron donating substituents on the benzo ring, thus limiting the range of compounds available for SAR studies. The use of 3-iodo-BTOs 8 did not provide a significant improvement in the yields of 3-ethyl-BTOs 6. Microwave-assisted Stille coupling of chlorides 5 gave dramatically improved yields, which were consistently superior to those from the corresponding iodides 8. The application of microwave-assisted synthesis extended the range of substituted BTOs available for SAR studies and provided an efficient, scalable synthesis of the investigational anticancer agent, SN29751 (1).     

Synthesis and study of the transfer of substituent electronic effects in substituted 2,5-diphenyloxazoles

A series of para-substituted 2,5-diphenyloxazoles was synthesized using Robinson-Gabriel procedure and the transfer of substituent electronic effects in these compounds was examined.Translated from Khimiya Geterotslklicheskikh Soedinenii, No. 2, pp. 193–197, February, 1985.