Co/Fe/Al2O3/cordierite催化C3H6选择性还原NO的实验研究

采用溶胶凝胶法和浸渍法制备了负载于蜂窝陶瓷上的Co/Fe/Al₂O₃/cordierite催化剂,在陶瓷管流动反应器上对其催化C₃H₆选择性还原NO的性能进行了测试。结果表明,该催化剂表现出最优脱硝性能,在模拟烟气条件下,当反应温度为550 ℃时可实现97%的脱硝效率。Co的引入可显著增强Fe/Al₂O₃/cordierite催化剂抗SO₂和H₂O的能力。在模拟烟气中同时引入0.02% SO₂和3% H₂O后,1.5Co/Fe/Al₂O₃/cordierite的脱硝性能受影响甚微,当反应温度高于500 ℃时1.5Co/Fe/Al₂O₃/cordierite催化C₃H₆还原NO的效率均可达到90%以上;相比之下,未经Co修饰的催化剂Fe/Al₂O₃/cordierite脱硝性能受到了严重的抑制,在整个反应温度区间（200-700 ℃）内,其催化C₃H₆还原NO的效率最高不足50%。XRD和SEM表征结果表明,经过适量的Co修饰后的1.5Co/Fe/Al₂O₃/cordierite表面变得更疏松,且形成了以钴铁和钴铝双金属氧化物为主要成分的球状晶粒。H₂-TPR结果表明,相比于Fe/Al₂O₃/cordierite,1.5Co/Fe/Al₂O₃/cordierite有更好的低温还原性能。Py-FTIR结果表明,Co的引入可使催化剂表面的Lewis酸明显增加,且生成了Brønsted酸。N₂吸附-脱附表征结果表明,Co可增大催化剂的比表面积。     

NO reduction with C3H8 on Co/Al2O3 catalyst. effect of O2 concentration

The selective catalytic reduction (SCR) of NO by propane in excess oxygen-containing gas mixture was studied on Co/Al₂O₃ catalyst. The oxygen concentration is very important for the reaction. The NO conversion to N₂ without oxygen is 3% at 800 K and when the O₂ concentration is raised up to 8% the NO conversion reaches its maximum value of 60% at 800 K. Characterization results by TPR and UV-Vis spectroscopy show that in the catalyst, species strongly interacting with tetrahedral and octahedral Co²⁺ ions in the support are present. This revised version was published online in June 2006 with corrections to the Cover Date.     

丙烷在Ce-Fe/Al2O3/cordierite上选择性催化还原NO

利用凝胶溶胶法和浸渍法制备了Ce-Fe/Al₂O₃/cordierite催化剂,实验研究了其催化丙烷选择性还原NO的特性。结果表明,当铈的负载量从1%增加至5%时,Ce-Fe/Al₂O₃/cordierite的C₃H₈-SCR性能先增强后减弱,3.5Ce-Fe/Al₂O₃/cordierite具有最佳的脱硝性能,在有氧条件下,600℃时可实现96.5%的脱硝效率。Ce的加入能够提升Fe/Al₂O₃/cordierite催化剂的抗硫性能。烟气中通入0.02%的SO₂后,3.5Ce-Fe/Al₂O₃/cordierite催化丙烷还原NO的转化率始终维持在93%,而没有经过Ce修饰的Fe/Al₂O₃/cordierite的NO转化率从88%下降为80%左右。利用XRD、N₂吸附-脱附、SEM、H₂-TPR、吡啶吸附红外光谱等手段研究了催化剂的物理化学性质。结果表明,加入助剂铈能与Fe形成了固溶体,增加催化剂表面Lewis酸浓度和氧化还原能力,从而提高了催化丙烷还原NO的性能。过多的铈引入会减少Fe₂O₃结晶体的形成,不利于在C₃H₈-SCR反应中形成NO₂/NO₃^-物种,从而导致NO还原效率下降。     

Two-stage catalytic system of Sn/Al2O3 and Pt/Al2O3for NO reduction by propene in lean conditions

The Pt/Al₂O₃, Sn/Al₂O₃catalysts were prepared by the single sol-gel method. The two-stage Sn/Al₂O₃and Pt/Al₂O₃catalyst in series for NO reduction with propene were investigated. The coexistance of water vapor enhanced the activity at medium temperature of 300-400^oC, and the NO conversion was above 50% at 225 to 500^oC even in the presence of water vapor and SO₂. This revised version was published online in August 2006 with corrections to the Cover Date.     

时间分辨红外发射光谱研究C2H3+NO反应体系

The elementary reaction of C2H3＋ NO has been reported for the first time in this paper.C2H3 radical was produced by laser photolysis of vinyl bromide at 248 nm. Vibrationally excited reaction products H2CO,NCO and HCN were observed. Two exothermic reaction channels leading to HCN＋ H2CO and CH3＋ NCO are identified.     

Cu改性Fe/Al-PILC催化剂的SCR-C3H6脱硝特性实验研究

为提高Fe/Al-PILC催化剂的SCR脱硝的低温活性,采用Cu对Fe/Al-PILC催化剂进行改性。采用超声浸渍法合成系列xCu-Fe/Al-PILC催化剂,通过XRD、N₂吸附-脱附、H₂-TPR、UV-vis、XPS、Py-FTIR等系列技术手段进行表征。在固定床微反应器上进行C₃H₆的选择性催化还原NO的实验。结果表明,经过铜改性后的xCu-Fe/Al-PILC催化剂有效解决了Fe/Al-PILC催化剂低温SCR活性不足的问题,同时提高了中高温活性。催化剂在200-500℃能够实现80%以上脱硝效率,其中,0.13Cu-Fe/Al-PILC在250-500℃实现了90%以上NO转化率,并在250℃达到最高脱硝效率93%。XRD、N₂吸附-脱附结果表明,经过铜改性的催化剂可以提供更多反应活性位,提高反应速率。H₂-TPR结果表明,掺杂铜使催化剂获得低温还原能力,同时增强了中高温还原能力。UV-vis、XPS结果表明,铜掺杂不仅使铁获得更高氧化态,同时产生了更多低温活性物质孤立Fe³⁺。Py-FTIR结果表明,催化剂表面同时存在Lewis酸和Brønsted酸,Lewis酸是SCR反应活性中心。     

Cooperation of reducing species for NO reduction over Ag/Al2O3 under oxidizing conditions

Summary The cooperation effect of reducing species for selective reduction of NO over Ag/Al₂O₃ has been investigated in the presence of excess oxygen. When the combinations of propene or propane and ethanol or methanol were used as reducing agents, NO reduction took place over a wider temperature range, compared with a single hydrocarbon as reducing agent.     

Selective catalytic reduction of NO by C2H2 over Ce-Al2O3 catalyst with rate-determining step of NO oxidation

Ce-Al2O3 catalysts prepared by co-precipitation are investigated both in NO oxidation by O2 and in selective catalytic reduction of NO by C2H2(C 2 H 2-SCR).It is found that C2H2-SCR is initiated and controlled by NO oxidation to NO 2 over Al2O3.Ce loading on Al2O3 is almost inactive for NO oxidation below 350 C,since NO2 strongly adsorbs on cerium oxide,leading to the active sites being blocked,which was characterized by temperature-programmed desorption of NO and NO 2 and Fourier transform infrared spectroscopy after NO+O 2 coadsorption over the samples.However,in the case of C2H2-SCR,Ce loading on Al 2 O 3 significantly improves the reaction by accelerating the NO oxidation step in the temperature range of 250-450 C,since the nitrate species produced by NO 2 adsorption is an active intermediate required by C2H 2-SCR.     

The Catalytic Dehydrogenation of c2h6 to c2h4 under non-Oxidative Conditions over the 6cr/g-al2o3Catalyst

In the present paper, the catalytic dehydrogenation of C₂H₆ to C₂H₄ under non-oxidative conditions was investigated in a fixed-bed micro-reactor under ambient pressure at 823 - 923 K. The 6Cr/g-Al₂O₃ catalyst was found to be the best catalyst among the g-Al₂O₃, SiO₂, MCM41, MgO and Si-2 supported chromium oxide catalysts. The features of the 6Cr/g-Al₂O₃ catalyst for the reaction could be listed as follows: (1) At 823 - 923 K, the C₂H₄ selectivity of 92.5-78.6% at a C₂H₆ conversion of 9.5-29.8% could be obtained. (2) The catalyst had the good regeneration performance, i.e., could be regenerated by air repeatedly. (3) The main products were C₂H₄, CH₄, H₂ and coke. No carbon oxides were identified.     

Cu-Fe-PILC催化C3H6选择性还原NO的性能

采用羟基铁离子柱撑Na-Mont制备出1.0Fe-PILC,通过超声浸渍法合成不同铜负载量的nCu-Fe-PILC,并测试了其在富氧条件下催化C_3H_6选择性催化还原NO的性能。通过N_2吸附脱附、XRD、UV-Vis、H_2-TPR、Py-FTIR等技术手段表征催化剂的微观结构和物化性质,进一步解释其催化反应机理。结果表明,Cu的引入提高了1.0Fe-PILC的中低温活性和抗水硫能力。其中9Cu-Fe-PILC在300℃时NO转化率可达69.8%以上,400℃后NO转化率保持在99%以上且水硫影响较小。XRD、N_2吸附脱附结果表明,催化剂的SCR活性与所负载的活性组分和催化剂的吸附能力有关。UV-Vis结果表明,9Cu-Fe-PILC具有较强的中低温活性,与其含有较多的游离态Cu~(2+)有关。H_2-TPR结果表明,与1.0Fe-PILC相比,经Cu修饰的nCu-Fe-PILC获得了中低温还原能力。Py-FTIR结果表明,nCu-Fe-PILC表面同时含有Lewis酸和Br?nsted酸,Lewis酸是影响催化剂SCR活性的主要因素。     

γ-Al2O3对SCR脱硝催化剂V2O5-WO3/TiO2的改性研究

采用溶胶凝胶法制备了不同γ-Al₂O₃含量的钛铝复合载体,以此为载体采用浸渍法负载V₂O₅和WO₃制备了一系列催化剂。采用X射线衍射(XRD)、比表面积测定(BET)、程序升温还原(H₂-TPR)、高分辨率透射电子显微镜(HRTEM)等表征技术对催化剂表面形态进行分析,同时在模拟氨气选择性催化还原NO(NH₃-SCR)的反应条件下,对催化剂的脱硝反应活性和SO₂抗中毒进行考察。结果发现,TiO₂和γ-Al₂O₃之间的协同作用使得V₂O₅-WO₃/TiO₂-γ-Al₂O₃催化剂的脱硝效率及活性窗口明显优于单一载体制备的催化剂,表现出了良好的热稳定性和抗SO₂毒化能力,特别是V₂O₅-WO₃/TiO₂-15% γ-Al₂O₃在310~460 ℃,NO的转化率均在80%以上,反应窗口最宽。各种表征结果表明,TiO₂-γ-Al₂O₃复合载体中γ-Al₂O₃高度分散在TiO₂上,复合载体具有较大的比表面积,同时具有较强的还原能力。     

Selective catalytic reduction of NO over metal oxide or noble metal-doped In2O3/Al2O3 catalysts by propene in the presence of oxygen

The activities of metal oxide CuO, SnO₂, CoO, Ag₂O, ZnO or noble metal Pt, Pd, Rh-doped In₂O₃/Al₂O₃ catalysts for selective catalytic reduction of NO by propene were investigated. The temperature windows for NO reduction over noble metal-doped In₂O₃/Al₂O₃ catalysts were shifted and broaden slightly compared with single component catalyst alone. This revised version was published online in June 2006 with corrections to the Cover Date.     

Promoting effect of sol-gel method and pre-treatment on the activity of SnO2/Al2O3 catalyst for NO reduction by propene

SnO₂/Al₂O₃ catalyst prepared by sol-gel method showed higher activity than those prepared by impregnation method, and their activity was significantly improved by pre-treatment in the reaction gas. The increased activity is closely related to the agglomeration of SnO₂ species and the re-exposure of Al₂O₃, which was previously covered by dispersed SnO₂ species. This revised version was published online in June 2006 with corrections to the Cover Date.     

Fe-PILC在贫燃条件下催化丙烯选择性还原NO

采用羟基铁离子柱撑Na-Mont制备了铁柱撑黏土催化剂(Fe-PILC),铁物种作为柱撑成分,同时充当活性组分,研究其在贫燃条件下催化丙烯选择性还原NO的特性。通过XRD、N_2吸附-脱附、H_2-TPR、UV-vis、Py-FTIR等方法对催化剂进行物理化学性质表征,进一步研究其反应机理。研究表明,1.0Fe-PILC在450-600℃时NO的转化率超过98%,N_2的选择性可达97%以上,且抗水蒸气和SO_2的能力较强。XRD和N_2吸附-脱附研究表明,Fe-PILC中铁物种柱撑进入Na-Mont层间,使催化剂的比表面积和孔容增大。H_2-TPR研究表明,Fe-PILC在400℃左右还原能力较强,主要体现为Fe~(3+)→Fe~(2+)的还原。UVvis研究表明,Fe-PILC的脱硝活性与铁氧低聚物种FexOy呈正相关。Py-FTIR研究表明,Fe-PILC表面同时含有Lewis酸和Br■nsted酸性位,Lew is酸性位是C_3H_6与NO进行催化反应的主要活性中心。     

共沉淀法掺杂SiO_2对V_2O_5-WO_3/TiO_2催化剂SCR性能的影响

通过共沉淀法将SiO_2组分掺入到V2O5-WO3/SiO_2-TiO_2催化剂TiO_2载体中,并通过多种物理化学手段,考察了不同SiO_2掺杂量对催化剂结构、表面性质与SCR性能的影响.结果表明,SiO_2掺入到TiO_2中,Si与Ti形成Si—O—Ti键,使催化剂比表面积增加.Si—O—Ti键的生成以及Si Ox物种上的-OH基团使催化剂表面Br?nsted酸增加,但新增的Br?nsted酸对SCR反应不利,并且SiO_2的掺杂也使得V~(5+)含量降低,Si—O—V键合作用使分散的VOx物种更难还原.Si组分以共沉淀法掺入到V_2O_5-WO_3/TiO_2催化剂会造成脱硝活性的显著下降.     

Pt/Al2O3催化剂还原方法对Pt粒子表面性质的影响

以CO吸附红外光谱结合CO化学吸附、透射电镜和能量散射谱等手段,研究了Pt/Al₂O₃制备过程中还原方法对最终Pt粒子表面活性位分布、粒径大小和表面残余氯等表面性质的影响,重点考察了普通的气相氢气还原和甲酸钠水溶液还原两种方法的对比。结果表明,采用氢气气相还原时,Pt/Al₂O₃上Pt粒子表面台阶位和平台位比例基本不随焙烧温度而变;而采用甲酸钠水溶液还原时,Pt粒子表面台阶位所占比例随焙烧温度升高而提高。水的存在和还原条件剧烈这两个因素使得水相甲酸钠还原不利于Pt的分散,所得Pt/Al₂O₃上Pt的分散度比氢气气相还原所得要小。无论何种还原条件,水的存在都有利于Pt前躯体中的氯从Pt/Al₂O₃表面去除;而氢气气相还原所得催化剂表面则有大量残余氯存在。     

Ni/γ-Al2O3催化剂上萘加氢生成十氢萘的催化反应研究

采用Ni/Al₂O₃催化剂,在高压固定床反应器中考察了反应温度、压力、空速和氢油体积比比等因素对萘饱和加氢反应行为的影响,尤其是反应条件对反式十氢萘和顺式十氢萘选择性的影响。研究表明,反式十氢萘和顺式十氢萘的选择性与反应操作条件密切相关;反式十氢萘与顺式十氢萘的比例随着氢油比和温度的升高而增加,而随着压力和空速的增加而减小。在反应温度260-290℃、反应压力为5-7 MPa、空速为1-1.5 h^-1及氢油体积比大于250时,十氢萘的选择性最高可达99%以上,萘的转化率接近100%,产物中反式和顺式十氢萘的比例最高,可达4.0左右。对Ni/γ-Al₂O₃催化剂稳定性进行了考察,初步发现催化活性组分的烧结或流失是催化剂失活和影响产物中反式十氢萘和顺式十氢萘比例的主要原因。     

Singlet and triplet potential energy surfaces of C3H2

The detailed singlet and triplet potential energy surfaces of C₃H₂ involving nine isomers and 13 transition structures are studied at the G3 level of theory. The rearrangement mechanisms and the electronic properties of various isomers in a broad energy range have been studied in both singlet and triplet states. Cyclopropenylidene and propargylene are found to be the most stable isomers in the singlet and triplet states, respectively. The singlet isomers are found to be more kinetically stable species as a result of high conversion barriers through which they pass. The calculations indicate that cyclopropyne in its triplet state is the least kinetically stable isomer. It is realized that the G3 method comprises both computational cost and accuracy and thus can be applied to investigation of potential energy surface of small molecules.     

Pt/Al2O3和Pt-Cu/Al2O3催化CCl4氢化脱氯反应

制备了Al2O3负载Pt单金属催化剂和负载Pt-Cu双金属催化剂,比较了二者不同还原温度对其催化CCl4氢化脱氯反应性能的影响。 单金属Pt催化剂上主要生成CHCl3,而双金属Pt-Cu催化剂上产物随催化剂制备时的还原温度不同而异,当催化剂经400 ℃用H2还原后产物主要为CHCl3,而当催化剂经800 ℃用H2还原后产物主要为CCl2CCl2。 由于CCl4氢化反应是强放热反应,催化剂表面局部过热使得在反应中生成的C2等产物聚合结焦,覆盖了催化剂的活性中心,导致催化剂失活。 因此,通过加入甲醇作为稀释剂以带走部分反应热可提高催化剂的稳定性。 同时也降低了CHCl3的选择性,提高了CCl2CCl2的选择性。     

Selective catalytic oxidation of NO with O2 over Ce-doped MnOx/TiO2 catalysts

A series of Ce-doped MnOx/TiO2 catalysts were prepared by impregnation method and used for catalytic oxidation of NO in the presence of excess O2. The sample with the Ce doping concentration of Ce/Mn=1/3 and calcined at 300°C shows a superior activity for NO oxidation to NO2. On Ce(1)Mn(3)Ti catalyst, 58% NO conversion was obtained at 200°C and 85% NO conversion at 250°C with a GHSV of 41000 h-1, which was much higher than that over MnOx/TiO2 catalyst (48% at 250°C). Characterization results implied that the higher activity of Ce(1)Mn(3)Ti could be attributed to the enrichment of well-dispersed MnOx on the surface and the abundance of Mn3+ and Ti3+ species. The addition of Ce into MnOx/TiO2 could improve oxygen storage capacity and facilitate oxygen mobility of the catalyst as shown by PL and ESR, so that its activity for NO oxidation could be enhanced. The effect of H2O and SO2 on the catalyst activity was also investigated.