Electronic transfer mechanism in self-assembled monolayers of silicon

Journal of Solid State Electrochemistry - This work presents a theoretical-experimental study on electronic transfer mechanism on crystal silicon surface modified with redox molecules derived from...     

Sum frequency generation microscopy of microcontact-printed mixed self-assembled monolayers

Sum frequency generation imaging microscopy (SFGIM) is used to image the chemically distinct regions of a microcontact-printed monolayer surface. The contrast in the images is based on the vibrational spectrum of each component in the monolayer. Mixtures of C16 thiols on gold with CH3 and phenyl termination are imaged with a resolution of approximately 10 microm. Microcontact printing produces films that are different compared to the immersion procedure of forming self-assembled monolayers. The SFGIM technique is able to obtain a vibrational spectrum at each point on the surface and demonstrate that the stamped area has significant mixing with the molecules deposited from the backfilling solution.     

Nanoscale clustering of carbohydrate thiols in mixed self-assembled monolayers on gold

Self-assembled monolayers (SAMs) bearing pendant carbohydrate functionality are frequently employed to tailor glycan-specific bioactivity onto gold substrates. The resulting glycoSAMs are valuable for interrogating glycan-mediated biological interactions via surface analytical techniques, microarrays, and label-free biosensors. GlycoSAM composition can be readily modified during assembly by using mixed solutions containing thiolated species, including carbohydrates, oligo(ethylene glycol) (OEG), and other inert moieties. This intrinsic tunability of the self-assembled system is frequently used to optimize bioavailability and antibiofouling properties of the resulting SAM. However, until now, our nanoscale understanding of the behavior of these mixed glycoSAMs has lacked detail. In this study, we examined the time-dependent clustering of mixed sugar + OEG glycoSAMs on ultraflat gold substrates. Composition and surface morphologic changes in the monolayers were analyzed by X-ray photoelectron spectroscopy (XPS) and atomic force microscopy (AFM), respectively. We provide evidence that the observed clustering is consistent with a phase separation process in which surface-bound glycans self-associate to form dense glycoclusters within the monolayer. These observations have significant implications for the construction of mixed glycoSAMs for use in biosensing and glycomics applications.     

Molecular chirality and charge transfer through self-assembled scaffold monolayers

The effect of molecular chirality on electron transmission is explored by photoelectrochemistry. Thiol-terminated chiral scaffold molecules containing a porphyrin chromophore were self-assembled on gold surfaces to form a monolayer. Incorporation of the SAM-coated gold into an electrochemical cell and illumination with visible light generated a cathodic photocurrent. When using circularly polarized light, the photocurrent displayed an asymmetry (different magnitude of photocurrent for right versus left polarization) that changed with the molecular chirality (left- or right-handedness of the scaffold). A symmetry constraint on the electronic coupling between the porphyrin and the organic scaffold is proposed as a possible mechanism for the photocurrent asymmetry.     

Triphenylene silanes for direct surface anchoring in binary mixed self-assembled monolayers

New triphenylene-based silanes 2-(ω-(chlorodimethylsilyl)-n-alkyl)-3,6,7,10,11-penta-m-alkoxytriphenylene 4 (Tm-Cn) with n = 8 or 9 and m = 7, 8, 9, 10, or 11 were synthesized, and their self-assembly behavior in the liquid state and at glass and silicon oxide surfaces was investigated. The mesomorphic properties of triphenylene silanes 4 (Tm-Cn) and their precursors 3 (Tm-Cn) were determined by differential scanning calorimetry (DSC), polarizing optical microscopy (POM), and X-ray diffraction. From the small-angle X-ray scattering (SAXS) regime, a preferential discotic lamellar mesophase can be deduced, and wide-angle X-ray scattering (WAXS) highlights the liquid-like characteristics of the alkyl side chains. To transfer these bulk structural properties to thin films, self-assembled monolayers (SAMs) were obtained by adsorption from solution and characterized by water contact angle measurements, null ellipsometry, and atomic force microscopy (AFM). Employing the concentration as an additional degree of freedom, binary SAMs of 2-(ω-(chlorodimethylsilyl)-undecyl)-3,6,7,10,11-penta-decyloxytriphenylene 4 (T10-C11) were coassembled with chlorodecyldimethylsilane or chlorodimethyloctadecylsilane, and their capability as model systems for organic templating was evaluated. The structure of the resulting binary mixed SAMs was analyzed by water contact angle measurements, null ellipsometry, and X-ray reflectivity (XRR) in combination with theoretical modeling by a multidimensional Parratt algorithm and AFM. The composition dependence of film thickness and roughness can be explained by a microscopic model including the steric hindrance of the respective molecular constituents.     

Correction to: Electronic transfer mechanism in self-assembled monolayers of silicon

Journal of Solid State Electrochemistry - The authors correct the affiliation and address of the following author in this article (p. 3099)     

Photoinduced electron transfer in self-assembled monolayers of porphyrin-fullerene dyads on ITO

Two porphyrin-fullerene dyads were synthesized to form self-assembled monolayers (SAMs) on indium-tin oxide (ITO) electrode, with either ITO-porphyrin-fullerene or ITO-fullerene-porphyrin orientations. The dyads contain two linkers for connecting the porphyrin and fullerene moieties and enforcing them essentially to similar geometries of the donor-acceptor pair, and two linkers to ensure the attachment of the dyads to the ITO surface with two desired opposite orientations. The transient photovoltage responses (Maxwell displacement charge) were measured for the dyad films covered by insulating LB films, thus ensuring that the dyads interact only with the ITO electrode. The direction of the electron transfer was from the photoexcited dyad to ITO independent of the dyad orientation. The response amplitude for the ITO-fullerene-porphyrin structure, where the primary intramolecular electron-transfer direction coincides with the direction of the final electron transfer from the dyad to ITO, was 25 times stronger than that for the opposite ITO-porphyrin-fullerene orientation of the dyad. Static photocurrent measurements in a liquid electrochemical cell, however, show only a minor orientation effect, indicating that the photocurrent generation is controlled by the processes at the SAM-liquid interface.     

Maleimido-terminated self-assembled monolayers

Four approaches have been explored for the preparation of maleimido-functionalized self-assembled monolayers (SAMs) on silicon. SAMs prepared by self-assembly of maleimido-functionalized alkyltrichlorosilanes (11-maleimido-undecyl-trichlorosilane) on oxide-covered silicon yield higher signals from maleimido functionalities in ATR-IR (attenuated total reflection IR) spectroscopy and XPS (X-ray photoelectron spectroscopy) than the other three methods. The surface composition of maleimido groups was tailored further by the formation of mixed monolayers with nonfunctionalized alkyltrichlorosilanes (decyltrichlorosilane). The order of the alkyl chains within the monolayers only slightly depends on the composition of the mixed monolayers. We utilized the maleimido-terminated SAMs to bind various nucleophilic compounds, alkylamines, alkylthiols, and thiol-tagged DNA oligonucleotides by means of conjugate addition.     

Electron transfer at self-assembled monolayers measured by scanning electrochemical microscopy

New approaches have been developed for measuring the rates of electron transfer (ET) across self-assembled molecular monolayers by scanning electrochemical microscopy (SECM). The developed models can be used to independently measure the rates of ET mediated by monolayer-attached redox moieties and direct ET through the film as well as the rate of a bimolecular ET reaction between the attached and dissolved redox species. By using a high concentration of redox mediator in solution, very fast heterogeneous (10(8) s(-1)) and bimolecular (10(11) mol(-1) cm(3) s(-1)) ET rate constants can be measured. The ET rate constants measured for ferrocene/alkanethiol on gold were in agreement with previously published data. The rates of bimolecular heterogeneous electron transfer between the monolayer-bound ferrocene and water-soluble redox species were measured. SECM was also used to measure the rate of ET through nonelectroactive alkanethiol molecules between substrate gold electrodes and a redox probe (Ru(NH(3))(6)(3+)) freely diffusing in the solution, yielding a tunneling decay constant, beta, of 1.0 per methylene group.     

Anion effect on mediated electron transfer through ferrocene-terminated self-assembled monolayers

Inorganic anions strongly influence the electron transfer rate from the ascorbate to the ferrocene-terminated self-assembled monolayer (SAM) composed of 9-mercaptononyl-5'-ferrocenylpentanoate (Fc(CH2)4COO(CH2)9SH, MNFcP). At the 1 M concentration level of the supporting anion (sodium salt electrolyte), a more than 10-fold increase in the electrocatalytic oxidation rate constant of the ascorbate is observed in the following sequence: PF6-, ClO4-, BF4-, NO3-, Cl-, SO4(2-), NH2SO3- (sulfamate), and F-. The sequence corresponds to the direction of increasing hydration energy of the corresponding anion, suggesting that highly hydrated ions promote electrocatalytic electron transfer to the ferrocene-terminated SAMs, while poorly hydrated ions inhibit it. Fourier transform surface-enhanced Raman spectroscopy (FT-SERS), in combination with cyclic voltammetry, indicates the formation of surface ion pairs between the ferricinium cation (Fc+) and low hydration energy anions, while, on the contrary, no ion pairs were observed in the electrolytes dominated by the high hydration energy anions. Though it is evident that the ion-pairing ability of hydrophobic anions is directly responsible for the electrocatalytic electron transfer inhibition, an estimate of the free, ion-unpaired Fc+ surface concentration shows that it cannot be directly related to the electron transfer rate. This suggests that the principal reason of the anion-induced electron transfer rate modulation might be related to the molecular level changes of the physical and chemical properties as well as the structure of the self-assembled monolayer.     

Electron transfer of quinone self-assembled monolayers on a gold electrode

Dialkyl disulfide-linked naphthoquinone, (NQ-C_n-S)₂, and anthraquinone, (AQ-C_n-S)₂, derivatives with different spacer alkyl chains (C_n: n = 2, 6, 12) were synthesized and these quinone derivatives were self-assembled on a gold electrode. The formation of self-assembled monolayers (SAMs) of these derivatives on a gold electrode was confirmed by infrared reflection-absorption spectroscopy (IR-RAS). Electron transfer between the derivatives and the gold electrode was studied by cyclic voltammetry. On the cyclic voltammogram a reversible redox reaction between quinone (Q) and hydroquinone (QH₂) was clearly observed under an aqueous condition. The formal potentials for NQ and AQ derivatives were −0.48 and −0.58 V, respectively, that did not depend on the spacer length. The oxidation and reduction peak currents were strongly dependent on the spacer alkyl chain length. The redox behavior of quinone derivatives depended on the pH condition of the buffer solution. The pH dependence was in agreement with a theoretical value of E_1/2 (mV) = E′ − 59pH for 2H⁺/2e⁻ process in the pH range 3–11. In the range higher than pH 11, the value was estimated with E_1/2 (mV) = E′ − 30pH , which may correspond to H⁺/2e⁻ process. The tunneling barrier coefficients (β) for NQ and AQ SAMs were determined to be 0.12 and 0.73 per methylene group (CH₂), respectively. Comparison of the structures and the alkyl chain length of quinones derivatives on these electron transfers on the electrode is made.     

DNA-directed protein immobilization on mixed self-assembled monolayers via a streptavidin bridge

The simultaneous detection of multiple analytes is an important consideration for the advancement of biosensor technology. Currently, few sensor systems possess the capability to accurately and precisely detect multiple antigens. This work presents a simple approach for the functionalization of sensor surfaces suitable for multichannel detection. This approach utilizes self-assembled monolayer (SAM) chemistry to create a nonfouling, functional sensor platform based on biotinylated single-stranded DNA immobilized via a streptavidin bridge to a mixed SAM of biotinylated alkanethiol and oligo(ethylene glycol). Nonspecific binding is minimized with the nonfouling background of the sensor surface. A usable protein chip is generated by applying protein-DNA conjugates which are directed to specific sites on the sensor chip surface by utilizing the specificity of DNA hybridization. The described platform is demonstrated in a custom-built surface plasmon resonance biosensor. The detection capabilities of a sensor using this protein array have been characterized using human chorionic gonadotropin (hCG). The platform shows a higher sensitivity in detection of hCG than that observed using biotinylated antibodies. Results also show excellent specificity in protein immobilization to the proper locations in the array. The vast number of possible DNA sequences combine with the selectivity of base-pairing makes this platform an excellent candidate for a sensor capable of multichannel protein detection.     

由烷基硫醇组成的三元混合膜结构与性质研究

本文采用共吸附法制备了由戊硫醇(PT),癸硫醇(DT)和十六烷基硫醇(HDT)组成的三元混合膜,通过循环伏安,X-射线光电子能谱,扫描隧道显微镜(STM)和导电原子力对其结构及性质进行了表征。研究表明硫醇分子通过Au-S键在金电极上形成了一层致密的单分子膜,组装膜表面组成与其在组装液中的摩尔浓度有关。混合膜中各组分形成独立的相区,具有不同的电子传递能力。该研究为未来纳米器件的开发提供更多样化的表面以及更加详实的理论依据。     

Electroactive mixed self-assembled monolayers: A numerical overview of phase segregations

We propose a modeling of phase segregations, inspired by image filtering, and dedicated to electrochemical systems. This original approach is compared to previous experimental results and enhanced with the concepts of 2D segregation and site percolation threshold.     

Photoluminescence studies of oligothiophene self-assembled monolayers at low excitation energy

Photoluminescence spectroscopy studies have been performed on self-assembled monolayers (SAMs) on Au(111) of thiophene oligomers with the number of thiophen rings N=3 and N=4. Photoluminescence spectra of SAMs reveal excitonic behavior with different band resolution and temperature dependence. These differences are attributed to different SAMs structure (degree of ordering).     

Spatially resolved vibrational energy transfer in molecular monolayers

We have shown that it is possible to input heat to one location of a molecule and simultaneously measure its arrival in real time at two other locations, using an ultrafast flash-thermal conductance technique. A femtosecond laser pulse heats an Au layer to approximately 800 degrees C, while vibrational sum-frequency generation spectroscopy (SFG) monitors heat flow into self-assembled monolayers (SAMs) of organic thiolates. Heat flow into the SAM creates thermally induced disorder, which decreases the coherent SFG signal from the CH-stretching transitions. Recent improvements in the technique are described, including the use of nonresonant background-suppressed SFG. The improved apparatus was characterized using alkanethiolate and benzenethiolate SAMs. In the asymmetric 2-methyl benzenethiolate SAM, SFG can simultaneously monitor CH-stretching transitions of both phenyl and methyl groups. The phenyl response to flash-heating occurs at least as fast as the 1 ps time for the Au surface to heat. The methyl response has a faster portion similar to the phenyl response and a slower portion characterized by an 8 ps time constant. The faster portions are attributed to disordering of the methyl-substituted phenyl rings due to thermal excitation of the Au-S adbonds. The slower portion, seen only in the methyl SFG signal, is attributed to heat flow from the metal surface into the phenyl rings and then to the methyl groups.