Synthesis and properties of compressed dihydride complexes of iridium: theoretical and spectroscopic investigations

Reaction of [Cp*Ir(P-P)Cl][B(C6F5)4] (P-P = bisdimethydiphosphinomethane (dmpm), bisdiphenyldiphosphinomethane (dppm)) with [Et3Si][B(C6F5)4] in methylene chloride under 1 atm of hydrogen gas affords the dicationic compressed dihydride complexes [Cp*Ir(P-P)H2][B(C6F5)4]2. These dicationic complexes are highly acidic and are very readily deprotonated to the corresponding monohydride cations. When the preparative reaction is carried out under HD gas, the hydride resonance exhibits JHD = 7-9 Hz, depending upon the temperature of observation, with higher values of JHD observed at higher temperatures. A thermally labile rhodium analogue, [CpRh(dmpm)(H2)][B(C6F5)4]2, was prepared similarly. A sample prepared with HD gas gave JHD = 31 Hz and J(HRh) = 31 Hz, allowing the Rh complex to be identified as a dihydrogen complex. Quantum dynamics calculations on a density functional theory (DFT) potential energy surface have been used to explore the structure of the Ir complexes, with particular emphasis on the nature of the potential energy surface governing the interaction between the two hydride ligands and the Ir center.     

Dihydrogen complexes of electrophilic metal centers: observation of Cr(CO)5(H2), W(CO)5(H2) and [Re(CO)5(H2)]+

Photolysis of dichloromethane solutions of M(CO)6 (M = Cr, W) at low temperature in the presence of hydrogen gas affords W(CO)5(H2) (1) and Cr(CO)5(H2) (2). Complexes 1 and 2 are characterized as dihydrogen complexes based on short T1 values for the hydride resonances and a large HD coupling of 35.3 Hz (W) and 35.8 Hz (Cr) in the HD derivatives. A cationic analogue, [Re(CO)5(H2)]+ (3), was prepared by reaction of Re(CO)5Cl with [Et3Si][B(C6F5)4] in fluorobenzene under hydrogen. Complex 3-d1 exhibits JHD = 33.9 Hz. Complex 3 is strongly acidic, with complete deprotonation by diethyl ether; complexes 1 and 2 are moderately acidic. Deprotonation of 1 is complete in the presence of one equivalent of triethylamine.     

Speciation and kinetics related to catalytic carbonylation in the presence of cis-[Ir(CO)2I2]P(C6H5)4 under CO and H2 pressures

The differences in the reactivities of the square-planar complexes cis-[Rh(CO)2I2]- (1) and cis-[Ir(CO)2I2]- (2), involved in the catalytic carbonylation of olefins, are investigated, with P(C6H5)4+ as the counterion, by ambient- and high-pressure NMR and IR spectroscopy. Under an elevated pressure of CO, 1 and 2 form the [M(CO)3I] complexes with the equilibrium constants KIr approximately 1.8 x 10(-3) and KRh approximately 4 x 10(-5). The ratio KIr/KRh close to 50 shows that, under catalytic conditions (a few megapascals), only complex 1 remains in the anionic form, while a major amount of the iridium analogue 2 is converted to a neutral species. The oxidative addition reactions of HI with 1 and 2 give two monohydrides of different geometries, mer,trans-[HRh(CO)2I3]- (3) and fac,cis-[HIr(CO)2I3]- (4), respectively. Both hydrides are unstable at ambient temperature and form, within minutes for Rh and within hours for Ir, the corresponding cis-[M(CO)2I2]- (1 or 2) and [M(CO)2I4]- (5 or 6) species and H2. When an H2 pressure of 5.5 MPa is applied to a nitromethane solution of complex 2, ca. 50% of 2 is transformed to cis-dihydride complexes. The formation of cis,cis,cis-[IrH2(CO)2I2]- (8a) is followed by intermolecular rearrangements to form cis,trans,cis-[IrH2(CO)2I2]- (8b) and cis,cis,trans-[IrH2(CO)2I2]- (8c). A small amount of a dinuclear species, [Ir2H(CO)4I4]x- (9), is also observed. The formation rate constants for 8a and 8b at 262 K are k1(262) = (4.42 +/- 0.18) x 10(-4) M-1 s-1, k-1(262) = (1.49 +/- 0.07) x 10(-4) s-1, k2(262) = (2.81 +/- 0.04) x 10(-5) s-1, and k-2(262) = (5.47 +/- 0.16) x 10(-6) s-1. The two equilibrium constants K1(262) = [8a]/([2][H2]) = 2.97 +/- 0.03 M-1 and K2(262) = [8b]/[8a] = 5.13 +/- 0.10 show that complex 8b is the thermodynamically stable addition product. However, no similar H2 addition products of the rhodium analogue 1 are observed. The pressurization with H2 of a solution containing 2 and 6 give the monohydride 4, the dihydrides 8a and 8b, the dinuclear complex 9, and the two new complexes [Ir(CO)2I3] (10) and [HIr(CO)2I2] (11). The reactions of the iridium complexes with H2 and HI are summarized in a single scheme.     

Synthesis and reactivity of iridium complexes with pyridine and piperidine ligands: models for hydrodenitrogenation

The complexes [Ir(H)2(eta1-N-L)2(PPh3)2]PF6, L = py (1), iQ (2) and pip (3) (py = pyridine, iQ = isoquinoline, pip = piperidine) have been synthesized in high yields by hydrogenation of [Ir(cod)(PPh3)2]PF6 in the presence of the appropriate nitrogen compound. When hydrogen is bubbled through 1,2-dichloroethane solutions of 1 or 2, two new species were formed in each case by C-Cl bond activation of the solvent, Ir(H)2Cl(eta1-N-L)(PPh3)2 (L = py, 4; iQ, 5) and IrH(Cl)2(eta1-N-L)(PPh3)2 (L = py, 6; iQ, 7). Reaction of 3 with py or iQ yielded complexes 1 and 2, respectively, while under a slow stream of carbon monoxide the complex [Ir(H)2(eta1-N-pip)(CO)(PPh3)2]PF6 (8) was produced. Complex 3 also reacts with halide and 4-bromothiophenolate anions leading to the corresponding neutral species Ir(H)2(X)(eta1-N-pip)(PPh3)2, X = Cl (9), I (10) and 4-BrC6H4S (11), or with [MoS4]2- to yield the hetero-bimetallic complex [Ir(H)(PPh3)2(mu-S)2MoS2]- (13). All the new complexes were characterized by analytical and spectroscopic methods. The X-ray structures of , 2 and 8 consist of distorted octahedra with a mutually cis disposition of the two hydrides and mutually trans phosphines. Complexes 1, 2 and 3 and their derivatives are of interest as models for the chemisorption step in hydrodenitrogenation reactions on solid catalysts.     

Competition between NH.HIr Intramolecular Proton-Hydride Interactions and NH.FBF(3)(-) or NH.O Intermolecular Hydrogen Bonds Involving [IrH(2-thiazolidinethione)(4)(PCy(3))](BF(4))(2) and Related Complexes

The reaction of IrH(5)(PCy(3))(2) in acetone with 2 equiv of HBF(4) results in the formation of the air-stable complex [Ir(H)(2)(PCy(3))(2)(acetone)(2)]BF(4), 1. The reaction of 1 with an excess of 2-thiazolidinethione or 2-benzothiazolethione in the presence of 2 equiv of HBF(4) gives the complexes [Ir(H)(PCy(3))(L)(4)](BF(4))(2) (2a, L = 2-thiazolidinethione; 2b, L = 2-benzothiazolethione). Complex 2a has an intramolecular NH.H(Ir).HN interaction both in the crystalline solid as determined by X-ray diffraction and in a CD(2)Cl(2) solution as determined by the T(1) method. The d(HH) were determined to be 2.2 +/- 0.1 ? in the solid state and 1.9 +/- 0.1 ? in solution. The NH.H(Ir).HN interactions and NH.F.HN hydrogen bonds which involve FBF(3)(-) form a four-member ring in a butterfly conformation. The nOe effect of the hydride on the NH proton is around 10%. A crystal of 2a is in the triclinic space group P&onemacr; with a = 11.426(3), b = 11.922(3), c = 19.734(4) ?, alpha = 87.05(1) degrees, beta = 88.23(1) degrees, gamma = 75.50(1) degrees, V = 2599(1) ?(3), and Z = 2 at T = 173 K; full-matrix least-squares refinement on F(2) was performed for 10 198 independent reflections; R[F(2)>2sigma(F(2))] = 0.0480, R(w)(F(2)) = 0.099. The formation of the NH.HIr proton-hydride interaction is as favorable as the formation of intermolecular hydrogen bonds NH.FBF(3)(-) or NH.O hydrogen bonds with OPPh(3) or H(2)O in CD(2)Cl(2). A similar NH.HIr interaction also has been observed in the complexes [Ir(H)(2)(PCy(3))(2)(L)(2)]BF(4) (3a, L = 2-thiazolidinethione; 3b, L = 2-benzothiazolethione) but not in the complexes with L = NH(2)NH(2) (3c) and L = NH(3) (3d). Both the NH and IrH protons are deuterated when a solution of 2 or 3 in C(6)D(6) is exposed to 1 atm of D(2) gas or D(2)O.     

Dihydrogen complexes of iridium and rhodium

A series of iridium and rhodium pincer complexes have been synthesized and characterized: [(POCOP)Ir(H)(H(2))] [BAr(f)(4)] (1-H(3)), (POCOP)Rh(H(2)) (2-H(2)), [(PONOP)Ir(C(2)H(4))] [BAr(f)(4)] (3-C(2)H(4)), [(PONOP)Ir(H)(2))] [BAr(f)(4)] (3-H(2)), [(PONOP)Rh(C(2)H(4))] [BAr(f)(4)] (4-C(2)H(4)) and [(PONOP)Rh(H(2))] [BAr(f)(4)] (4-H(2)) (POCOP = κ(3)-C(6)H(3)-2,6-[OP(tBu)(2)](2); PONOP = 2,6-(tBu(2)PO)(2)C(5)H(3)N; BAr(f)(4) = tetrakis(3,5-trifluoromethylphenyl)borate). The nature of the dihydrogen-metal interaction was probed using NMR spectroscopic studies. Complexes 1-H(3), 2-H(2), and 4-H(2) retain the H-H bond and are classified as η(2)-dihydrogen adducts. In contrast, complex 3-H(2) is best described as a classical dihydride system. The presence of bound dihydrogen was determined using both T(1) and (1)J(HD) coupling values: T(1) = 14 ms, (1)J(HD) = 33 Hz for the dihydrogen ligand in 1-H(3), T(1)(min) = 23 ms, (1)J(HD) = 32 Hz for 2-H(2), T(1)(min) = 873 ms for 3-H(2), T(1)(min) = 33 ms, (1)J(HD) = 30.1 Hz for 4-H(2).     

Preparation of five- and six-coordinate aryl(hydrido) iridium(III) complexes from benzene and functionalized arenes by C-H activation

The reaction of the in situ generated cyclooctene iridium(I) derivative trans-[IrCl(C8H14)(PiPr3)2] with benzene at 80 degrees C gave a mixture of the five-coordinate dihydrido and hydrido(phenyl) iridium(III) complexes [IrH2(Cl)(PiPr3)2] 2 and [IrH(C6H5)(Cl)(PiPr3)2] 3 in the ratio of about 1 : 2. The chloro- and fluoro-substituted arenes C6H5X (X = Cl, F), C6H4F2 and C6H4F(CH3) reacted also by C-H activation to afford the corresponding aryl(hydrido) iridium(III) derivatives [IrH(C6H4X)(Cl)(PiPr3)2] 7, 8, [IrH(C6H3F2)(Cl)(PiPr3)2] 9-11 and [IrH[C6H3F(CH3)](Cl)(PiPr3)2] 12, 13, respectively. The formation of isomeric mixtures had been detected by 1H, 13C, 19F and 31P NMR spectroscopy. Treatment of 3 and 7-13 with CO gave the octahedral carbonyl iridium(III) complexes [IrH(C6H3XX')(Cl)(CO)(PiPr3)2] 5, 14-20 without the elimination of the arene. The reactions of trans-[IrCl(C8H14)(PiPr3)2] with aryl ketones C6H5C(O)R (R = Me, Ph), aryl ketoximes C6H5C(NOH)R (R = Me, Ph) and benzaloxime C6H5C(NOH)H resulted in the formation of six-coordinate aryl(hydrido) iridium(III) compounds 21-25 with the aryl ligand coordinated in a bidentate kappa2-C,O or kappa2-C,N fashion. With C6H5C(O)NH2 as the substrate, the two isomers [IrH[kappa2-N,O-NHC(O)C6H5](Cl)(PiPr3)2] 26 and [IrH[kappa2-C,O-C6H4C(O)NH2](Cl)(PiPr3)2] 27 were prepared stepwise. Treatment of trans-[IrCl(C8H14)(PiPr3)2] with benzoic acid gave the benzoato(hydrido) complex [IrH[kappa2-O,O-O2CC6H5](Cl)(PiPr3)2] 29 which did not rearrange to the kappa2-C,O isomer.     

Mechanistic studies of the transfer dehydrogenation of cyclooctane catalyzed by iridium bis(phosphinite) p-XPCP pincer complexes

Reaction of bis(phosphinite) PCP iridium pincer complexes (p-XPCP)IrHCl (5a-f) [X = MeO (5a), Me (5b), H (5c), F (5d), C(6)F(5) (5e), Ar(F)(= 3,5-bis(trifluoromethyl)phenyl) (5f)] with NaOtBu in neat cyclooctane (COA) generates 1:1 mixtures of the respective (p-XPCP)IrH(2) complexes 4a-f and the cyclooctene (COE) olefin complexes (p-XPCP)Ir(COE) (6a-f) at 23 degrees C. At higher temperatures, complexes 4 and 6 are equilibrated because of the degenerate transfer dehydrogenation of COA with free COE (6 + COA right harpoon over left harpoon 4 + 2COE), as was shown by temperature-dependent equilibrium constants and spin saturation transfer experiments at 80 degrees C. At this temperature, the COE complexes 6 exchange with free COE on the NMR time scale with the more electron-deficient complexes 6 exchanging COE faster. The exchange is dissociative and zero order in [COE]. Further analysis reveals that the stoichiometric hydrogenation of COE by complex 4f, and thus the separated back reaction 4f + 2COE --> 6f + COA proceeds at temperatures as low as -100 degrees C with the intermediacy of two isomeric complexes (p-Ar(F)PCP)Ir(H)(2)(COE) (8f, 8f'). COE deuteration with the perdeuterated complex 4f-d(38) at -100 degrees C results in hydrogen incorporation into the hydridic sites of complexes 8f,8f'-d(38) but not in the hydridic sites of complex 4f-d(38), thus rendering COE migratory insertion in complexes 8f,8f' reversible and COE coordination by complex 4f rate-determining for the overall COE deuteration.     

Mechanistic investigations of imine hydrogenation catalyzed by cationic iridium complexes

Complexes [IrH2(eta6-C6H6)(PiPr3)]BF4 (1) and [IrH2(NCMe)3(PiPr3)]BF4 (2) are catalyst precursors for homogeneous hydrogenation of N-benzylideneaniline under mild conditions. Precursor 1 generates the resting state [IrH2{eta5-(C6H5)NHCH2Ph}(PiPr3)]BF4 (3), while 2 gives rise to a mixture of [IrH{PhN=CH(C6H4)-kappaN,C}(NCMe)2(PiPr3)]BF4 (4) and [IrH{PhN=CH(C6H4)-kappaN,C}(NCMe)(NH2Ph)(PiPr3)]BF4 (5), in which the aniline ligand is derived from hydrolysis of the imine. The less hindered benzophenone imine forms the catalytically inactive, doubly cyclometalated compound [Ir{HN=CPh(C6H4)-kappaN,C}2(NH2CHPh2)(PiPr3)]BF4 (6). Hydrogenations with precursor 1 are fast and their reaction profiles are strongly dependent on solvent, concentrations, and temperature. Significant induction periods, minimized by addition of the amine hydrogenation product, are commonly observed. The catalytic rate law (THF) is rate = k[1][PhN=CHPh]p(H2). The results of selected stoichiometric reactions of potential catalytic intermediates exclude participation of the cyclometalated compounds [IrH{PhN=CH(C6H4)-kappaN,C}(S)2(PiPr3)]BF4 [S = acetonitrile (4), [D6]acetone (7), [D4]methanol (8)] in catalysis. Reactions between resting state 3 and D2 reveal a selective sequence of deuterium incorporation into the complex which is accelerated by the amine product. Hydrogen bonding among the components of the catalytic reaction was examined by MP2 calculations on model compounds. The calculations allow formulation of an ionic, outer-sphere, bifunctional hydrogenation mechanism comprising 1) amine-assisted oxidative addition of H2 to 3, the result of which is equivalent to heterolytic splitting of dihydrogen, 2) replacement of a hydrogen-bonded amine by imine, and 3) simultaneous H delta+/H delta- transfer to the imine substrate from the NH moiety of an arene-coordinated amine ligand and the metal, respectively.     

An elongated dihydrogen complex of iridium

Reaction of [Cp*Ir(dmpm)Cl]Cl with [Et3Si]B(ArF)4 (dmpm = bisdimethyl-phosphinomethane; ArF = C6F5) under hydrogen gas affords the dicationic complex [Cp*Ir(dmpm)H2]2+ (1), which is readily deprotonated by weak bases to give [Cp*Ir(dmpm)H]+. Complex 1 exists as a mixture of two isomers (97:3). On the basis of the magnitude of 2JH-P couplings and T1 measurements, a cis-dihydride or dihydrogen complex structure is suggested for the predominant isomer 1-cis (2JH-P = 6 Hz), with the minor isomer assigned a transoid structure 1-trans (2JH-P = 20 Hz). When the preparative reaction is carried out with HD gas, the resonance in the 1H NMR spectrum assigned to 1-cis-d1 exhibits1JH-D = 9.0 Hz. The observed values of 1JH-D vary significantly with temperature, increasing from 7.0 Hz at 223K to 9.0 Hz at 300 K. The observed chemical shift of 1-cis-d1 also varies significantly with temperature. These observations are interpreted in terms of a dynamic equilibrium between a cis-dihydride and a dihydrogen complex.     

Fine-tuning of metallaborane geometries: chemistry of iridaboranes derived from the reaction of

From reaction of [(Cp*Ir)2HxCl(4-x)] (x=1, 0) and LiBH4, arachno-[[Cp*IrH2]B3H7](1) is produced in moderate yield concurrently with [Cp*IrH4]. In contrast, reaction of [(Cp*Ir)2H2Cl2] with LiBH4 results in arachno-[[Cp*IrH]2(mu-H)B2H5] (3) in high yield at room temperature but a mixture of 1 and [[Cp*IrH]2(mu-H)BH4] (2) at 0 degrees C. BH3 x THF converts 1 to arachno-[(Cp*IrHB4H9] (4) and 2 to 3 with 1 as a minor product. Further, reaction of 3 with excess of BH3 x THF results in formation of nido-[[Cp*Ir]2-(mu-H)B4H7] (6) formed by loss of H2 from the intermediate arachno-[[Cp*IrH]2B4H8] (5). Reaction of 1 with [Co2(CO)8] permits the isolation of two metallaboranes, arachno-[[Cp*Ir(CO)]-B3H7] (7) and nido-[1-[Cp*Ir]-2,3-Co2-(CO)4(mu-CO)B3H7] (8). Treatment of 4 with [Co2(CO)8] gives only one single mixed-metal metallaborane nido-[1-[Cp*Ir]-2-Co(CO)3B4H7 (9) in high yield. Finally, pyrolysis of 8 results in loss of hydrogen and formation of pileo-[1-[Cp*Ir]-2,3-Co2(CO)5B3H5] (10) with a BH-capped square-pyramidal structure. With kinetic control rational synthesis of a variety metallaboranes has been achieved by varying the number of chlorides in the monocyclopentadienylmetal halide dimer, reaction temperature, types of monoborane, and metal fragment sources.     

Highly effective pincer-ligated iridium catalysts for alkane dehydrogenation. DFT calculations of relevant thermodynamic, kinetic, and spectroscopic properties

The p-methoxy-substituted pincer-ligated iridium complexes, (MeO-(tBu)PCP)IrH(4) ((R)PCP = kappa(3)-C(6)H(3)-2,6-(CH(2)PR(2))(2)) and (MeO-(iPr)PCP)IrH(4), are found to be highly effective catalysts for the dehydrogenation of alkanes (both with and without the use of sacrificial hydrogen acceptors). These complexes offer an interesting comparison with the recently reported bis-phosphinite "POCOP" ((R)POCOP = kappa(3)-C(6)H(3)-2,6-(OPR(2))(2)) pincer-ligated catalysts, which also show catalytic activity higher than unsubstituted PCP analogues (Gottker-Schnetmann, I.; White, P.; Brookhart, M. J. Am. Chem. Soc. 2004, 126, 1804). On the basis of nu(CO) values of the respective CO adducts, the MeO-PCP complexes appear to be more electron-rich than the parent PCP complexes, whereas the POCOP complexes appear to be more electron-poor. However, the MeO-PCP and POCOP ligands are calculated (DFT) to show effects in the same directions, relative to the parent PCP ligand, for the kinetics and thermodynamics of a broad range of reactions including the addition of C-H and H-H bonds and CO. In general, both ligands favor (relative to unsubstituted PCP) addition to the 14e (pincer)Ir fragments but disfavor addition to the 16e complexes (pincer)IrH(2) or (pincer)Ir(CO). These kinetic and thermodynamic effects are all largely attributable to the same electronic feature: O --> C(aryl) pi-donation, from the methoxy or phosphinito groups of the respective ligands. DFT calculations also indicate that the kinetics (but not the thermodynamics) of C-H addition to (pincer)Ir are favored by sigma-withdrawal from the phosphorus atoms. The high nu(CO) value of (POCOP)Ir(CO) is attributable to electrostatic effects, rather than decreased Ir-CO pi-donation or increased OC-Ir sigma-donation.     

Oxidative addition of water to novel Ir(I) complexes stabilized by dimethyl sulfoxide ligands.

The oxidative addition of water to novel Ir(I) DMSO complexes is described. IrCl(DMSO)3 (1) is synthesized in 90% yield when treating a toluene slurry of [Ir2Cl2(COE)4] (COE = cyclooctene) with excess DMSO. Its dimer, [Ir2Cl2(DMSO)4] (2) is obtained in 95% yield starting from 1. The cationic complex [Ir(DMSO)4]PF6 (6) is prepared in situ from [Ir(COE)2(O=CMe2)2]PF6 (5). These complexes add water at room temperature, giving rise to the oxidative addition products syn-[(DMSO)2HIr(mu-OH)2(mu-Cl)IrH(DMSO)2] [IrCl2(DMSO)2] (3) and anti-[(DMSO)2(DMSO)HIr(mu-OH)2IrH(DMSO)2(DMSO)](PF6)2 (7), respectively. Reductive elimination in pyridine leads to quantitative isolation of mixed Ir(I) DMSO-pyridine complexes IrCl(py)(DMSO)2 (4) and [Ir(py)2(DMSO)2]PF6 (8), respectively. Compounds 1, 3, and 7 have been characterized by X-ray crystallography. 3 and 7 show dimeric structures with the hydroxo ligands bridging the iridium atoms and in 7 both O- and S-bonded DMSO ligands are present.     

Stoichiometric and catalytic H/D incorporation by cationic iridium complexes: a common monohydrido-iridium intermediate

A mechanistic study of the stoichiometric and catalytic H/D exchange reactions involving cationic iridium complexes is presented. Strong evidence suggests that both stoichiometric and catalytic reactions proceed via a monohydrido-iridium species. Stoichiometric deuterium incorporation reactions introduce multiple deuterium atoms into the organic products when aryliridium compounds CpPMe(3)Ir(C(6)H(4)X)(OTf) (X = H, o-CH(3), m-CH(3), p-CH(3)) react with D(2). Multiple deuteration occurs at the unhindered positions (para and meta) of toluene, when X = CH(3). The multiple-deuteration pathway is suppressed in the presence of an excess of the coordinating ligand, CH(3)CN. The compound CpPMe(3)IrH(OTf) (1-OTf) is observed in low-temperature, stoichiometric experiments to support a monohydrido-iridium intermediate that is responsible for catalyzing multiple deuteration in the stoichiometric system. When paired with acetone-d(6)(), [CpPMe(3)IrH(3)][OTf] (4) catalytically deuterates a wide range of substrates with a variety of functional groups. Catalyst 4 decomposes to [CpPMe(3)Ir(eta(3)-CH(2)C(OH)CH(2))][OTf] (19) in acetone and to [CpPMe(3)IrH(CO)][OTf] (1-CO) in CH(3)OH. The catalytic H/D exchange reaction is not catalyzed by simple H(+) transfer, but instead proceeds by a reversible C-H bond activation mechanism.     

The role of halogenated carborane monoanions in olefin hydrogenation catalysed by cationic iridium phosphine complexes

Iridium hydridophosphine complexes of general formula [Ir(PR3)2H2(anion)](PR3= PPh3, PMe2Ph; anion =[1-closo-CB(11)H(6)Cl(6)]-, [1-closo-CB(11)H(6)I(6)]-, [BAr(F)4]-) have been prepared by hydrogenation of cyclooctadiene precursor complexes. Solid-state structures of selected examples of these complexes reveal intimate contacts between the carborane anion and cation, with the anion binding through two lower-hemisphere halogen ligands. In CD2Cl2 solution the very weakly coordinating anions [1-closo-CB(11)H(6)Cl(6)]- and [BAr(F)4]- are suggested to favour the formation of solvent complexes such as [Ir(PR3)2H2(solvent)n][anion], while the [1-closo-CB(11)H(6)I(6)]- anion forms a tightly bound complex with the cationic iridium fragment. Calculated DeltaG values for anion reorganisation in d8-toluene reflect this difference in interaction between the anions and cation. With the bulky anion [1-closo-CB(11)Me(5)I(6)]- different complexes are formed: Ir(PPh3)H2(1-closo-HCB(11)Me(5)I(6)) and [(PPh3)3Ir(H2)H2][1-closo-HCB(11)Me(5)I(6)] which have been characterised spectroscopically. Diffusion measurements in CD2Cl2 are also consistent with larger, solvent coordinated, complexes for the more weakly coordinating anions and a tighter interaction between anion and cation for [1-closo-CB(11)H(6)I(6)]-. All the complexes show some ion-paring in solution. Comparison with data previously reported for the [1-closo-CB(11)H(6)Br(6)]- anion shows that this anion--as expected--fits between [1-closo-CB(11)H(6)Cl(6)]- and [1-closo-CB(11)H(6)I(6)]- in terms of coordinating ability. Although not coordinating, the large [1-closo-CB(11)H(6)Cl(6)]- and [BAr(F)4)]- anions do provide some stabilisation towards the metal centre, as decomposition to the hydride bridged dimer [Ir2(PPh3)4H5]+ is retarded. This is in contrast to the [PF6]- salt where decomposition is immediate. As expected, complexes with the smaller phosphine PMe2Ph form tighter interactions with the carborane anions. These observations on the interaction between anion and cation in solution are reflected in benchmark hydrogenation studies that show a significant attenuation in rate of hydrogenation of cyclohexane on using the [1-closo-CB(11)H(6)I(6)]- anion or complexes with the PMe2Ph phosphine. We also comment on the reusability of the catalysts and their tolerance to water and oxygen impurities. Overall the catalyst with the [1-closo-CB(11)H(6)Br(6)]- anion shows the best combination of rate of hydrogenation, reusability and tolerance to impurities.     

Dimethylsulfoxide as a ligand for RhI and IrI complexes--isolation, structure, and reactivity towards X-H bonds (X=H, OH, OCH3)

Novel neutral and cationic Rh(I) and Ir(I) complexes that contain only DMSO molecules as dative ligands with S-, O-, and bridging S,O-binding modes were isolated and characterized. The neutral derivatives [RhCl(DMSO)(3)] (1) and [IrCl(DMSO)(3)] (2) were synthesized from the dimeric precursors [M(2)Cl(2)(coe)(4)] (M=Rh, Ir; COE=cyclooctene). The dimeric Ir(I) compound [Ir(2)Cl(2)(DMSO)(4)] (3) was obtained from 2. The first example of a square-planar complex with a bidentate S,O-bridging DMSO ligand, [(coe)(DMSO)Rh(micro-Cl)(micro-DMSO)RhCl(DMSO)] (4), was obtained by treating [Rh(2)Cl(2)(coe)(4)] with three equivalents of DMSO. The mixed DMSO-olefin complex [IrCl(cod)(DMSO)] (5, COD=cyclooctadiene) was generated from [Ir(2)Cl(2)(cod)(2)]. Substitution reactions of these neutral systems afforded the complexes [RhCl(py)(DMSO)(2)] (6), [IrCl(py)(DMSO)(2)] (7), [IrCl(iPr(3)P)(DMSO)(2)] (8), [RhCl(dmbpy)(DMSO)] (9, dmbpy=4,4'-dimethyl-2,2'-bipyridine), and [IrCl(dmbpy)(DMSO)] (10). The cationic O-bound complex [Rh(cod)(DMSO)(2)]BF(4) (11) was synthesized from [Rh(cod)(2)]BF(4). Treatment of the cationic complexes [M(coe)(2)(O=CMe(2))(2)]PF(6) (M=Rh, Ir) with DMSO gave the mixed S- and O-bound DMSO complexes [M(DMSO)(2)(DMSO)(2)]PF(6) (Rh=12; Ir=in situ characterization). Substitution of the O-bound DMSO ligands with dmbpy or pyridine resulted in the isolation of [Rh(dmbpy)(DMSO)(2)]PF(6) (13) and [Ir(py)(2)(DMSO)(2)]PF(6) (14). Oxidative addition of hydrogen to [IrCl(DMSO)(3)] (2) gave the kinetic product fac-[Ir(H)(2)Cl(DMSO)(3)] (15) which was then easily converted to the more thermodynamically stable product mer-[Ir(H)(2)Cl(DMSO)(3)] (16). Oxidative addition of water to both neutral and cationic Ir(I) DMSO complexes gave the corresponding hydrido-hydroxo addition products syn-[(DMSO)(2)HIr(micro-OH)(2)(micro-Cl)IrH(DMSO)(2)][IrCl(2)(DMSO)(2)] (17) and anti-[(DMSO)(2)(DMSO)HIr(micro-OH)(2)IrH(DMSO)(2)(DMSO)][PF(6)](2) (18). The cationic [Ir(DMSO)(2)(DMSO)(2)]PF(6) complex (formed in situ from [Ir(coe)(2)(O=CMe(2))(2)]PF(6)) also reacts with methanol to give the hydrido-alkoxo complex syn-[(DMSO)(2)HIr(micro-OCH(3))(3)IrH(DMSO)(2)]PF(6) (19). Complexes 1, 2, 4, 5, 11, 12, 14, 17, 18, and 19 were characterized by crystallography.     

Complete basis set B3LYP NMR calculations of CDCl3 solvent's water fine spectral details

The assignment of singlet at 1.55 ppm and the 1:1:1 triplet at 1.519 ppm to H(2)O and HOD in the 400 MHz (1)H NMR spectrum of CDCl(3) solvent were supported by complete basis set (CBS) GIAO-B3LYP calculated chemical shift and the CBS B3LYP estimated (2)J(D,H) spin-spin coupling constant (SSCC). The CBS fitting of B3LYP/cc-pCVxZ and B3LYP/pcJ-n predicted SSCC values, the accurate value of (2)J(D,H) = -1.082 +/- 0.030 Hz of HOD in chloroform-d(1) and the H/D isotopic shift of 0.0307(1) ppm were reported for the first time. The agreement between CBS B3LYP predicted chemical shift, spin-spin values and experiment was good.     

13C NMR study of halogen bonding of haloarenes: measurements of solvent effects and theoretical analysis

Solvent effects on the NMR spectra of symmetrical (X = F (1), X = Cl (2), X = Br (3), X = I (4), X = NO2 (5), X = CN (6)) and unsymmetrical (X = I, Y = MeO (7), Y = PhO (8)) para-disubstituted acetophenone azines X-C6H4-CMe=N-N=CMe-C6H4-Y and of models X-C6H4-CMe=N-Z (X = I, Z = H (9), Z = NH2 (10)), 4-iodoacetophenone (11), and iodobenzene (12) were measured in CDCl(3), DMSO, THF, pyridine, and benzene to address one intramolecular and one intermolecular issue. Solvent effects on the (13)C NMR spectra are generally small, and this finding firmly establishes that the azine bridge indeed functions as a "conjugation stopper," an important design concept in our polar materials research. Since intermolecular halogen bonding of haloarenes do occur in polar organic crystalline materials, the NMR solution data pose the question as to whether the absence of solvent shifts indicates the absence of strong halogen bonding in solution. This question was studied by the theoretical analysis of the DMSO complexes of iodoarenes 4, 9-12, and of iodoacetylene. DFT and MP2 computations show iodine bonding, and characteristic structural and electronic features are described. The nonrelativistic complexation shifts and the change in the spin-orbit induced heavy atom effect of iodine compensate each other, and iodine bonding thus has no apparent effect on Ci in the iodoarenes. For iodides, complexation by DMSO occurs and may or may not manifest itself in the NMR spectra. The absence of complexation shifts in the NMR spectra of halides does not exclude the occurrence of halogen bonding in solution.     

On the mechanism of (PCP)Ir-catalyzed acceptorless dehydrogenation of alkanes: a combined computational and experimental study

Pincer complexes of the type ((R)PCP)IrH(2), where ((R)PCP)Ir is [eta(3)-2,6-(R(2)PCH(2))(2)C(6)H(3)]Ir, are the most effective catalysts reported to date for the "acceptorless" dehydrogenation of alkanes to yield alkenes and free H(2). We calculate (DFT/B3LYP) that associative (A) reactions of ((Me)PCP)IrH(2) with model linear (propane, n-PrH) and cyclic (cyclohexane, CyH) alkanes may proceed via classical Ir(V) and nonclassical Ir(III)(eta(2)-H(2)) intermediates. A dissociative (D) pathway proceeds via initial loss of H(2), followed by C-H addition to ((Me)PCP)Ir. Although a slightly higher energy barrier (DeltaE(+ +)) is computed for the D pathway, the calculated free-energy barrier (DeltaG(+ +)) for the D pathway is significantly lower than that of the A pathway. Under standard thermodynamic conditions (STP), C-H addition via the D pathway has DeltaG(o)(+ +) = 36.3 kcal/mol for CyH (35.1 kcal/mol for n-PrH). However, acceptorless dehydrogenation of alkanes is thermodynamically impossible at STP. At conditions under which acceptorless dehydrogenation is thermodynamically possible (for example, T = 150 degrees C and P(H)2 = 1.0 x 10(-7) atm), DeltaG(+ +) for C-H addition to ((Me)PCP)Ir (plus a molecule of free H(2)) is very low (17.5 kcal/mol for CyH, 16.7 kcal/mol for n-PrH). Under these conditions, the rate-determining step for the D pathway is the loss of H(2) from ((Me)PCP)IrH(2) with DeltaG(D)(+ +) approximately DeltaH(D)(+ +) = 27.2 kcal/mol. For CyH, the calculated DeltaG(o)(+ +) for C-H addition to ((Me)PCP)IrH(2) on the A pathway is 35.2 kcal/mol (32.7 kcal/mol for n-PrH). At catalytic conditions, the calculated free energies of C-H addition are 31.3 and 33.7 kcal/mol for CyH and n-PrH addition, respectively. Elimination of H(2) from the resulting "seven-coordinate" Ir-species must proceed with an activation enthalpy at least as large as the enthalpy change of the elimination step itself (DeltaH approximately 11-13 kcal/mol), and with a small entropy of activation. The free energy of activation for H(2) elimination (DeltaG(A)(+ +)) is hence found to be greater than ca. 36 kcal/mol for both CyH and n-PrH under catalytic conditions. The overall free-energy barrier of the A pathway is calculated to be higher than that of the D pathway by ca. 9 kcal/mol. Reversible C-H(D) addition to ((R)PCP)IrH(2) is predicted to lead to H/D exchange, because the barriers for hydride scrambling are extremely low in the "seven-coordinate" polyhydrides. In agreement with calculation, H/D exchange is observed experimentally for several deuteriohydrocarbons with the following order of rates: C(6)D(6) > mesitylene-d(12) > n-decane-d(22) > cyclohexane-d(12). Because H/D exchange in cyclohexane-d(12) solution is not observed even after 1 week at 180 degrees C, we estimate that the experimental barrier to cyclohexane C-D addition is greater than 36.4 kcal/mol. This value is considerably greater than the experimental barrier for the full catalytic dehydrogenation cycle for cycloalkanes (ca. 31 kcal/mol). Thus, the experimental evidence, in agreement with calculation, strongly indicates that the A pathway is not kinetically viable as a segment of the "acceptorless" dehydrogenation cycle.     

Heterolytic activation of hydrogen as a trigger for iridium complex promoted activation of carbon-fluorine bonds

The cationic iridium(III) complex [IrCF(3)(CO)(dppe)(DIB)][BARF](2) where DIB = o-diiodobenzene, dppe = 1,2-bis(diphenylphosphino)ethane, and BARF = B(3,5-(CF(3))(2)C(6)H(3))(4)(-) undergoes reaction in the presence of dihydrogen to form [IrH(2)(CO)(2)(dppe)](+) as the major product. Through labeling studies and (1)H and (31)P[(1)H] NMR spectroscopies including parahydrogen measurements, it is shown that the reaction involves conversion of the coordinated CF(3) ligand into carbonyl. In this reaction sequence, the initial step is the heterolytic activation of dihydrogen, leading to proton generation which promotes alpha-C-F bond cleavage. Polarization occurs in the final [IrH(2)(CO)(2)(dppe)](+) product by the reaction of H(2) with the Ir(I) species [Ir(CO)(2)(dppe)](+) that is generated in the course of the CF(3) --> CO conversion.