Melting heat transfer in an axisymmetric stagnation-point flow of the Jeffrey fluid

This investigation explores the characteristics of melting heat transfer in a boundary layer flow of the Jeffrey fluid near the stagnation point on a stretching sheet subject to an applied magnetic field. The governing boundary layer equations are transformed to ordinary differential equations by similarity transformations. Resulting nonlinear problems are solved analytically by the homotopy analysis method. It is noticed that an increase in the melting parameter decreases the dimensionless velocity and temperature, while an increase in the Deborah number increases the velocity and momentum boundary layer thickness.     

The effects of transpiration on the boundary layer flow and heat transfer over a vertical slender cylinder

This paper deals with a theoretical (numerical) analysis of the effects that blowing/injection and suction have on the steady mixed convection or combined forced and free convection boundary layer flows over a vertical slender cylinder with a mainstream velocity and a wall surface temperature proportional to the axial distance along the surface of the cylinder. Both cases of buoyancy forces aid and oppose the development of the boundary layer are considered. Similarity equations are derived and their solutions are dependent upon the mixed convection parameter, the non-dimensional transpiration parameter and the curvature parameter, as well as of the Prandtl number. Dual solutions for the previously studied mixed convection boundary layer flows over an impermeable surface of the cylinder are shown to exist also in the present problem for aiding and opposing flow situations.     

Numerical simulation of MHD stagnation point flow and heat transfer of a micropolar fluid towards a heated shrinking sheet

A comprehensive study of magneto hydrodynamics two‐dimensional stagnation flow with heat transfer characteristics towards a heated shrinking sheet immersed in an electrically conducting incompressible micropolar fluid in the presence of a transverse magnetic field is analyzed numerically. The governing continuity, momentum, angular momentum and heat equations together with the associated boundary conditions are first reduced to a set of self similar nonlinear ordinary differential equations using a similarity transformation and are then solved by a method based on finite difference discretization. Some important features of the flow and heat transfer in terms of normal and streamwise velocities, microrotation and temperature distributions for different values of the governing parameters are analyzed, discussed and presented through tables and graphs. The results indicate that the reverse flow caused due to shrinking of the sheet can be stopped by applying a strong magnetic field. The magnetic field enhances the shear stresses and decreases the thermal boundary layer thickness. The heat loss per unit area from the sheet decreases with an increase in the shrinking parameter. Micropolar fluids exhibit reduction in shear stresses and heat transfer rate as compared with Newtonian fluids, which may be beneficial in the flow and thermal control of polymeric processing. Copyright © 2011 John Wiley & Sons, Ltd.     

Heat and mass transfer on a MHD third grade fluid with partial slip flow past an infinite vertical insulated porous plate in a porous medium

The influence of third grade, partial slip and other thermophysical parameters on the steady flow, heat and mass transfer of viscoelastic third grade fluid past an infinite vertical insulated plate subject to suction across the boundary layer has been investigated. The space occupying the fluid is porous. The momentum equation is characterized by a highly nonlinear boundary value problem in which the order of the differential equation exceeds the number of available boundary conditions. An efficient numerical scheme of midpoint technique with Richardson’s extrapolation is employed to solve the governing system of coupled nonlinear equations of momentum, energy and concentration. Numerical calculations were carried out for different values of various interesting non-dimensional quantities in the slip flow regime with heat and mass transfer and were shown with the aid of figures. The values of the wall shear stress, the local rate of heat and mass transfers were obtained and tabulated. The analysis shows that as the fluid becomes more shear thickening, the momentum boundary layer decreases but the thermal boundary layer increases; the magnetic field strength is found to decrease with an increasing temperature distribution when the porous plate is insulated. The consequences of increasing the permeability parameter and Schmidt number decrease both the momentum and concentration boundary layer thicknesses respectively whereas an increase in the thermal Grashof number gives rise to the thermal boundary layer thickness.     

Viscoelastic MHD flow boundary layer over a stretching surface with viscous and ohmic dissipations

In this study the momentum and heat transfer characteristics in an incompressible electrically conducting viscoelastic boundary layer fluid flow over a linear stretching sheet are considered. Highly non-linear momentum and thermal boundary layer equations are reduced to set of nonlinear ordinary differential equations by appropriate transformation.     

Numerical studies for flow and heat transfer of the Powell-Eyring fluid thin film over an unsteady stretching sheet with internal heat generation using the chebyshev finite difference method

An analysis is carried out to study the unsteady two-dimensional Powell-Eyring flow and heat transfer to a laminar liquid film from a horizontal stretching surface in the presence of internal heat generation. The flow of a thin fluid film and subsequent heat transfer from the stretching surface is investigated with the aid of a similarity transformation. The transformation enables to reduce the unsteady boundary layer equations to a system of nonlinear ordinary differential equations. A numerical solution of the resulting nonlinear differential equations is found by using an efficient Chebyshev finite difference method. A comparison of numerical results is made with the earlier published results for limiting cases. The effects of the governing parameters on the flow and thermal fields are thoroughly examined and discussed.     

Non-darcy double-diffusive mixed convection from heated vertical and horizontal plates in saturated porous media

The non-darcy mixed convection flows from heated vertical and horizontal plates in saturated porous media have been considered using boundary layer approximations. The flows are considered to be driven by multiple buoyancy forces. The similarity solutions for both vertical and horizontal plates have been obtained. The governing equations have been solved numerically using a shooting method. The heat transfer, mass transfer and skin friction are reduced due to inertial forces. Also, they increase with the buoyancy parameter for aiding flow and decrease for the opposing flow. For aiding flow, the heat and mass transfer coefficients are found to approach asymptotically the forced or free convection values as the buoyancy parameter approaches zero or infinity.     

Constant heat flux solution for mixed convection boundary layer viscoelastic fluid

The mixed convection boundary layer of a viscoelastic fluid past a circular cylinder with constant heat flux is discussed. The boundary layer equations are an order higher than those for the Newtonian (viscous) fluid and the adherence boundary conditions are insufficient to determine the solution of these equations completely. The governing non-similar partial differential equations are transformed into dimensionless forms and then solved numerically using the Keller-box method by augmenting an extra boundary condition at infinity. Numerical results obtained in the form of velocity distributions and temperature profiles are presented for a range of values of the dimensionless viscoelastic fluid parameter. It is found that for some values of the viscoelastic parameter and some negative values of the mixed convection parameter (opposing flow) the momentum boundary layer separates from the cylinder. Heating the cylinder delays separation and can, if the cylinder is warm enough, suppress the separation completely. Similar to the case of a Newtonian fluid, cooling the cylinder brings the separation point nearer to the lower stagnation point.     

Aiding and Opposing Mixed Convection Flow in Melting From a Vertical Flat Plate Embedded in a Porous Medium

The problem of melting from a vertical flat plate embedded in a porous medium is studied. The main focus is to determine the effect of mixed convection flow in the liquid phase on the melting phenomenon. Both aiding and opposing flows are considered. The conservation equations that govern the problem are reduced to a system of nonlinear ordinary differential equations. The governing equations are solved numerically. Numerical results are obtained for the temperature and flow fields in the melting region. The melting phenomenon decreases the local Nusselt number at the solid–liquid interface.     

Numerical study of evaporation by mixed convection of a binary liquid film flowing down the wall of two coaxial cylinders

Evaporation by mixed convection of a binary liquid film flowing down the external wall of a vertical cylinder has been investigated numerically. Two cases were considered: one where the cylinder wall is soaked with a liquid, and another where a liquid film flows along this wall. Heat, mass and momentum transfer in the liquid film and the vapor phase are modelled by mixed convection equations. In order to locate the liquid–vapor interface, a suitable coordinate transformation is carried out with suitable variables. The discretization of the dimensionless equations by an implicit difference scheme leads to a system of algebraic equations, which are solved by using Gauss algorithm for the momentum conservation equations and Thomas algorithm for the energy and diffusion conservation equations. The film thickness is calculated by the Newtons method. Results show, in particular, that the film thickness cannot be neglected and that the latent heat transfers are increasingly significant as the liquid film components become more volatile.     

MHD mixed convection stagnation-point flow of a nanofluid over a vertical permeable surface: a comprehensive report of dual solutions

The steady laminar magnetohydrodynamic mixed convection boundary layer flow of a nanofluid near the stagnation-point on a vertical permeable plate with prescribed external flow and surface temperature is investigated in this study. Here, both assisting and opposing flows are considered and studied. Using appropriate similarity variables, the governing equations are transformed into nonlinear ordinary differential equations in the dimensionless stream function, which is solved numerically using the Runge–Kutta scheme coupled with a conventional shooting procedure. Three different types of nanoparticles, namely copper Cu, alumina Al₂O₃ and titania TiO₂ with water as the base fluid are considered. Numerical results are obtained for the skin-friction coefficient and Nusselt number as well as for the velocity and temperature profiles for some values of the governing parameters, namely, the volume fraction of nanoparticles ?, permeability parameter f _o , magnetic parameter M and mixed convection parameter λ. It is found that dual solutions exist for both assisting and opposing flows, and the range of the mixed convection parameter for which the solution exists, increases with suction, magnetic field and volume fraction of nanoparticles.     

Mixed convection adjacent to inclined flat surfaces embedded in a porous medium

An analysis is performed to study the flow and heat transfer characteristics of laminar mixed convection boundary layer flows from inclined (including horizontal and vertical) surfaces embedded in a saturated porous medium with constant aiding external flows and uniform surface temperature. Both the streamwise and normal components of the buoyancy forces are retained in the momentum equations. Nondimensionalization of the boundary layer equations results in the following three governing parameter: (1)Gr/Re, the ratio of the Grashof number to the Reynolds number; (2)Pe _x =Re _x Pr, the Peclet number; (3) φ, the angle of inclination from the horizontal. The resulting nonsimilar equations are solved by an efficient implicit finite-difference scheme. Numerical results are presented for flows with different values ofGr/Re in the range of 0 to 50, over a wide range of the Peclet numbersPe _x, and various values of φ ranging from 0 to 90 degrees. It is found that the local surface heat transfer rate increases with increasing the local Peclet number. In addition, as the plate is tilted from the horizontal to the vertical orientation, the local Nusselt number increases for a given Peclet number and the effect of the buoyancy force on the surface heat transfer rate increases.     

Radiation effects on combined convection over a vertical flat plate embedded in a porous medium of variable porosity

The present paper is concerned with the study of radiation effects on the combined (forced-free) convection flow of an optically dense viscous incompressible fluid over a vertical surface embedded in a fluid saturated porous medium of variable porosity with heat generation or absorption. The effects of radiation heat transfer from a porous wall on convection flow are very important in high temperature processes. The inclusion of radiation effects in the energy equation leads to a highly non-linear partial differential equations which are transformed to a system of ordinary differential equations using non-similarity transformation. These equations are then solved numerically using implicit finite-difference method subject to appropriate boundary and matching conditions. A parametric study of the physical parameters such as the particle diameter-based Reynolds number, the flow based Reynolds number, the Grashof number, the heat generation or absorption co-efficient and radiation parameter is conducted on temperature distribution. The effects of radiation and other physical parameters on the local skin friction and on local Nusselt number are shown graphically. It is interesting to observe that the momentum and thermal boundary layer thickness increases with the radiation and decrease with increase in the Prandtl number.     

Steady mixed convection stagnation-point flow of upper convected Maxwell fluids with magnetic field

The steady MHD mixed convection flow of a viscoelastic fluid in the vicinity of two-dimensional stagnation point with magnetic field has been investigated under the assumption that the fluid obeys the upper-convected Maxwell (UCM) model. Boundary layer theory is used to simplify the equations of motion, induced magnetic field and energy which results in three coupled non-linear ordinary differential equations which are well-posed. These equations have been solved by using finite difference method. The results indicate the reduction in the surface velocity gradient, surface heat transfer and displacement thickness with the increase in the elasticity number. These trends are opposite to those reported in the literature for a second-grade fluid. The surface velocity gradient and heat transfer are enhanced by the magnetic and buoyancy parameters. The surface heat transfer increases with the Prandtl number, but the surface velocity gradient decreases.     

Mixed convection boundary layer flow of a viscoelastic fluid over a horizontal circular cylinder

The steady mixed convection boundary layer flow of a viscoelastic fluid over a horizontal circular cylinder in a stream flowing vertically upwards is numerically studied for both cases of heated and cooled cylinders. The governing partial differential equations are transformed into dimensionless forms using an appropriate transformation and then solved numerically using the Keller-box method. The comparison between the solutions obtained and those for a Newtonian fluid is found to be very good. Effects of the mixed convection and elasticity parameters on the skin friction and heat transfer coefficients for a fluid having the Prandtl number equal to one are also discussed. It is found that for some values of the viscoelastic parameter and some negative values of the mixed convection parameter (opposing flow) the boundary layer separates from the cylinder. Heating the cylinder delays separation and can, if the cylinder is warm enough, suppress the separation completely. Similar to the case of a Newtonian fluid, cooling the cylinder brings the separation point nearer to the lower stagnation point. However, for a sufficiently cold cylinder there will not be a boundary layer.     

Blasius flow and heat transfer of fourth-grade fluid with slip

This investigation deals with the effects of slip, magnetic field, and non- Newtonian flow parameters on the flow and heat transfer of an incompressible, electrically conducting fourth-grade fluid past an infinite porous plate. The heat transfer analysis is carried out for two heating processes. The system of highly non-linear differential equations is solved by the shooting method with the fourth-order Runge-Kutta method for moderate values of the parameters. The effective Broyden technique is adopted in order to improve the initial guesses and to satisfy the boundary conditions at infinity. An exceptional cross-over is obtained in the velocity profile in the presence of slip. The fourth-grade fluid parameter is found to increase the momentum boundary layer thickness, whereas the slip parameter substantially decreases it. Similarly, the non-Newtonian fluid parameters and the slip have opposite effects on the thermal boundary layer thickness.     

Mixed Convection Effect on Melting from a Vertical Plate in a Porous Medium

In the present work, the effect of mixed convection about vertical surfaces on the phenomenon of melting process in a fluid-saturated porous medium is analyzed on the basis of boundary layer approximations. Similarity solutions are obtained for aiding external flow. The final similarity equations are integrated numerically by use of the fourth-order Runge–Kutta method. Results are reported for the flow and thermal fields in the melt region. The melting phenomenon decreases the local Nusselt number at the solid–liquid interface.     

Flow of variable thermal conductivity fluid due to inclined stretching cylinder with viscous dissipation and thermal radiation

The aim of the present study is to investigate the flow of the Casson fluid by an inclined stretching cylinder. A heat transfer analysis is carried out in the presence of thermal radiation and viscous dissipation effects. The temperature dependent thermal conductivity of the Casson fluid is considered. The relevant equations are first simplified under usual boundary layer assumptions, and then transformed into ordinary differential equations by suitable transformations. The transformed ordinary differential equations are computed for the series solutions of velocity and temperature. A convergence analysis is shown explicitly. Velocity and temperature fields are discussed for different physical parameters by graphs and numerical values. It is found that the velocity decreases with the increase in the angle of inclination while increases with the increase in the mixed convection parameter. The enhancement in the thermal conductivity and radiation effects corresponds to a higher fluid temperature. It is also found that heat transfer is more pronounced in a cylinder when it is compared with a flat plate. The thermal boundary layer thickness increases with the increase in the Eckert number. The radiation and variable thermal conductivity decreases the heat transfer rate at the surface.     

Mixed convection about a non-isothermal vertical surface in a porous medium

The problem of mixed convection about non-isothermal vertical surfaces in a saturated porous medium is analysed using boundary layer approximations. The analysis is made assuming that the surface temperature varies as an arbitrary function of the distance from the origin. A perturbation technique has been applied to obtain the solutions. Using the differentials of the wall temperature, which are functions of distance along the surface, as perturbation elements, universal functions are derived for various values of the governing parameter Gr/Re. Both aiding and opposing flows are considered. The universal functions obtained can be used to estimate the heat transfer and fluid velocity inside the boundary layer for any type of wall temperature variation. As a demonstration of the method, heat transfer results have been presented for the case of the wall temperature varying as a power function of the distance from the origin. The results have been studied for various combinations of the parameters Gr/Re and the power index m, taking both aiding and opposing flows into consideration. On comparing these results with those obtained by a similarity analysis, the agreement is found to be good.     

Magnetoaerodynamic boundary layer flow with pressure gradient and separation

This study considers the large interaction parameter magnetoaerodynamic boundary layer associated with the free stream flow of a conducting fluid over an infinitely long circular insulator cylinder with the applied magnetic field normal to the distant free stream flow. The investigation is conducted in two parts; a theoretical solution of the associated boundary layer equations and a qualitative experimental investigation to allow visualization of flow separation caused by the magnetic field. The general integral formulation of Galerkin-Kantorovich-Dorodnitsyn is used to determine the boundary layer thickness, momentum thickness, displacement thickness, approximate separation point, and velocity profiles.