Synthesis and characterization of perfluorohexylated poly(3,4-ethylenedioxythiophene)

The perfluorohexylated 3,4-ethylenedioxythiophene 5 was prepared via Mitsunobu reaction of perfluorohexylatyed diol 2 with diethyl 3,4-dihydroxythiophenedicarboxylate followed by decarboxylation. The polymerization of 5 was conducted with both oxidative chemical and electrochemical polymerizations. The polymers were characterized by cyclic voltammogram, UV, IR, TGA and DSC.     

Synthesis and properties of germanium-containing poly(diphenylacetylenes)

1-Phenyl-2-[m-(trimethylgermyl)phenyl]acetylene (m-Me₃GeDPA) and 1-phenyl-2-[p-(trimethylgermyl)phenyl]acetylene (p-Me₃GeDPA) polymerized with TaCl₅–cocatalyst systems to provide in high yields new polymers having weight-average molecular weights over 1 × 10⁶. Poly(m-Me₃GeDPA) was a yellow solid, which completely dissolved in toluene, chloroform, etc., to form a tough film by solution casting. Poly(p-Me₃GeDPA) was also a yellow solid and partly insoluble in any solvents. The onset temperatures of weight loss for these polymers in the thermogravimetric analysis in air were as high as ca. 400°C. The oxygen permeability coefficient of poly(m-Me₃GeDPA) was 1100 barrers (25°C), which is about twice that of poly(dimethylsiloxane). © 1996 John Wiley & Sons, Inc.     

Synthesis and properties of a poly(diphenylacetylene) containing carbazolyl groups

1-(p-N-Carbazolylphenyl)-2-phenylacetylene (p-CzDPA) was polymerized by TaCl₅–co-catalyst systems (cocatalysts: n-Bu₁Sn, Et₃SiH, and 9BBN) to produce acetone-insoluble polymers in about 60-70% yields. Poly(p-CzDPA) was a yellowish-orange solid, most part of which was soluble in toluene, chloroform, etc., and its weight-average molecular weights were around 4×10⁵. This polymer formed a tough film by solution casting, and was thermally very stable (the onset temperature of weight loss in TGA in air 470°C). The oxygen per-meability coefficient of the polymer at 25°C was lower than two barrers. The present polymer showed photoconductivity and redox activity. © 1995 John Wiley & Sons, Inc.     

The synthesis and characterization of monodisperse poly(acrylic acid) and poly(methacrylic acid)

A number of polyacrylic (PAA) and polymethacrylic (PMAA) acids have been synthesized by living anionic polymerization of the monomeric tert-butyl esters followed by subsequent hydrolysis of the corresponding polyesters. The necessary precautions were taken in order to assure good molecular weight control, as well as high yields in the polymerization reactions. The intermediate and final polymers were characterized by gel permeation chromatography and NMR-H¹ spectrometry.     

Electrical and humidity sensing properties of synthesized hydrophosphoric acid doped polyaniline

H₃PO₄ doped polyaniline was synthesized by a single‐step chemical polymerization method using ammonium persulfate as an oxidizing agent. The material characterization was done by SEM, UV–vis spectroscopy and thermogravimetric analysis (TGA). The pellets of the synthesized material were used to study the electrical properties, using a four‐probe method. The room temperature electrical conductivity is found to be 0.2201 S/cm. The electrical resistance in response to the varying humid environment (ranging between 20 and 100% RH) is recorded to evaluate the sensitivity of the H₃PO₄ polyaniline samples toward humidity. The resistance of the samples is found to vary by three orders of magnitude for 20–100% RH and is found to decrease with increasing humidity. The response and recovery time are observed to be 12–14 and 26–30 sec, respectively. Copyright © 2007 John Wiley & Sons, Ltd.     

Preparation and properties of poly(alkyl vinyl ether-2-ethyl-2-oxazoline) diblock copolymers

A method for the synthesis of well-defined poly(alkyl vinyl ether–2-ethyl-2-oxazoline) diblock copolymers with hydrolytically stable block linkages has been developed. Monofunctional poly(alkyl vinyl ether) oligomers with nearly Poisson molecular weight distributions were prepared via a living cationic polymerization method using chloroethyl vinyl ether together with HI/ZnI₂ as the initiating system and lithium borohydride as the termination reagent. Using the resultant chloroethyl ether functional oligomers in combination with sodium iodide as macroinitiators, 2-ethyl-2-oxazoline was polymerized in chlorobenzene/NMP to afford diblock copolymers. A series of poly(methyl vinyl ether–2-ethyl-2-oxazoline) diblock materials were found to have polydispersities of ≈ 1.3–1.4 and are microphase separated as indicated by two T_g's in their DSC thermograms. These copolymers are presently being used as model materials to study fundamental parameters important for steric stabilization of dispersions in polar media. © 1993 John Wiley & Sons, Inc.     

Electrosynthesis and characterization of poly(hydroxy-methylated-3,4-ethylenedioxythiophene) film in aqueous micellar solution and its biosensing application

A new and efficient synthetic route to hydroxymethylated-3,4-ethylenedioxylthiophene（EDOT-MeOH） was developed by a simple four-step sequence,and its global yield was approximately 41.06%.The poly（hydroxymethylated-3, 4-ethylenedioxylthiophene）（PEDOT-MeOH） film was electrosynthesized in aqueous sodium dodecylsulfate micellar solutions and characterized by different methods.The EDOT-MeOH possessed better water solubility,and lower onset oxidation potential than EDOT.The as-obtained PEDOT-MeOH film displayed good reversible redox activity,stability and capacitance properties in a monomer-free electrolyte,especially the good solubility of PEDOT-MeOH film in strong polar organic solvents such as dimethyl sulfoxide and tetrahydrofuran created a potential application in many different fields. Fluorescent spectra indicated that PEDOT-MeOH was a yellow-green-light-emitter with maximum emission at 568 nm.The as-formed PEDOT-MeOH film had good biocompatibility and was used for fabricating the electrochemical vitamin C biosensor.The proposed biosensor showed a linear range of 3×10^-6 mol/L to 1.2×10^-2 mol/L with the detection limit of 1μmol/L,a sensitivity of 95.6μA（mmol/L）^-1 cm^-2,and a current response time less than 10 s and a fairly good stability (The relative standard deviation was 0.43%for 20 successive assays,the proposed biosensor still retained 93.5%of bioactivity after 15 days storage.This result indicated that the prepared PEDOT-MeOH film as immobilization matrix of biologically-active species could be a promising candidate for the design and application of biosensor.     

Voltammetric and waveguide spectroelectrochemical characterization of ultrathin poly(aniline)/poly(acrylic acid) films self-assembled on indium-tin oxide

We report on the spectroelectrochemical characterization of conducting polymer (CP) films, composed of alternating layers of poly(aniline) (PANI) and poly(acrylic acid) (PAA), deposited on ITO-coated, planar glass substrates using layer-by-layer self-assembly. Absorbance changes associated with voltammetrically induced redox changes in ultrathin films composed of only two bilayers (ITO/PANI/PAA/PANI/PAA) were monitored in real time using a unique multiple reflection, broadband attenuated total reflection (ATR) spectrometer. CP films in contact with pH 7 buffer undergo a single oxidation/reduction process, with ca. 12.5% of the aniline centers in the film being oxidized and reduced. The ATR spectra indicate that during an anodic sweep, the leucoemeraldine form of PANI in these films is oxidized to generate both the emeraldine and pernigraniline forms simultaneously. A comparison of the behavior observed during anodic and cathodic sweeps suggests that the rate of oxidation is limited by structural changes in the polymer film originating in electrostatic repulsion between positively charged PANI chains.     

Synthesis and characterization of new poly(N-1-adamantylmaleimide) and poly(N-1-diamantylmaleimide)

N-l-Diamantylmaleimide was synthesized by reaction of maleic anhydride with 1-aminodiamantane, followed by dehydration with acetic anhydride and sodium acetate. Poly(N-1-adamantylmaleimide) ( IIa ) and poly(N-l-diamantylmaleimide) ( IIb ) were polymerized using 2,2′-azobisisobutyronitrile (AIBN) as an initiator under different experimental conditions such as various initiator concentrations, solvents, polymerization temperatures, and polymerization times. Polymerizations of N-l-adamantylmaleimide in benzene at 60°C or in bulk gave polymers with molecular weights (2000–9500). The experimental results indicated that the propagation may be interrupted by steric hindrance of bulky and rigid substituents such as the adamantyl or diamantyl groups. In addition, the effect of chain transfer to monomer contributes to the relatively low activation energy. The glass transition temperatures of Ia and Ib were 204 and 216°C, respectively. The temperatures at 5% weight loss of the polymers IIa and IIb were above 412°C. © 1996 John Wiley & Sons, Inc.     

Synthesis of polyimide and poly(imide-benzoxazole) in polyphosphoric acid

A polyimide made from 4,4′-diaminodiphenyl ether (ODA) and 3,3′,4,4′-biphenyltetracarboxylic dianhydride (BPDA) was synthesized in polyphosphoric acid. Although the polymerization proceeded heterogeneously, a polyimide with an inherent viscosity of 0.90 was obtained, and a tough and flexible film was made from this polyimide. This polymerization was a one-step reaction including polycondensation and imidization; this was also confirmed by a model reaction between aniline and phthalic anhydride. Utilizing this polymerization method, 3,3′-dihydroxy-4,4′-diaminobiphenyl and 2 mol of 4-aminobenzoic acid were reacted in PPA, then BPDA was reacted to obtain an alternate copolymer containing imide and oxazole rings. This reaction gave a homogeneous solution of the poly(imide-benzoxazole). © 1993 John Wiley & Sons, Inc.     

Synthesis and properties of poly(hydroxyurethane)s

Bis(cyclic Carbonate)s 1 were prepared by the reaction of bis(epoxide)s and atmospheric pressure of CO₂ in the presence of sodium iodide and triphenylphosphine as catalysts at 100°C in high yield. Polyaddition of 1 and hexamethylenediamine ( 2a ) or dodecamethylenediamine ( 2b ) in dimethylsulfoxide or N,N-dimethylacetamide (DMAc) at 70 or 100°C for 24 h afforded corresponding poly(hydroxyurethane)s with M?_n 20,000–30,000. When ethylenediamine ( 2c ) or 1,3-propanediamine ( 2d ) was used as a diamine, poly(hydroxyurethane)s with lower molecular weight were obtained. The presence of water, methanol, or ethyl acetate in the solvent had little effect on the M?_n of the polymer obtained, because of the high chemoselectivity of the reaction of the five-membered cyclic carbonate and amine. Polyaddition of bis(cyclic carbonate) bearing ester groups and 2a also afforded the corresponding poly(hydroxyurethane) without aminolysis of the ester groups. Poly(hydroxyurethane) 3 obtained from the bis(cyclic carbonate) derived from bisphenol A was less soluble in organic solvents than model polyurethane 8 having no hydroxy groups obtained from 4,4′-isopropylidenebis(2-hydroxyethoxybenzene) and hexamethylene diisocyanate, and was thermally stable as well as 8.3 easily undertook crosslinking at room temperature by the treatment with hexamethylene diisocyanate or aluminium triisopropoxide in DMAc or tetrahydrofuran. The gel crosslinked by aluminium triisopropoxide regenerated the original polymer at room temperature by treatment with 1.5 equiv of 1.2M HCl in N-methylpyrollidinone for 1 h. © 1993 John Wiley & Sons, Inc.     

Synthesis and characterization of poly(diethylsiloxane) and its copolymers with different diorganosiloxane units

Poly(diethylsiloxane) and its copolymers with various kinds of R₁R₂SiO (R₁ = R₂ = methyl or phenyl, or R₁ = methyl and R₂ = phenyl) units have been prepared by the equilibrium polymerization of cyclosiloxanes. All the polymers have been characterized by ¹H and ²⁹Si NMR, gel permeation chromatography, differential scanning calorimetry (DSC), and dynamic mechanical analysis (DMA) measurements. The results indicate that a random distribution of different units has been obtained in the structures of copolymers containing 50 mol % diethylsiloxane units content. DSC and DMA show that the presence of 2.5 mol % diphenylsiloxane units or 5.0 mol % methylphenylsiloxane units in the copolymer can disrupt the crystallinity and lead to noncrystalline copolymers with low glass‐transition temperatures (ranging from ?133 to ?137 °C according to DSC). © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 2722–2730, 2003     

Synthesis and characterization of poly(vinylcyclohexane) derivatives

Six nearly monodisperse substituted poly(styrene) homopolymers, poly(styrene) (PS), poly(2-methylstyrene) (P2MS), poly(3-methylstyrene) (P3MS), poly(4-methylstyrene) (P4MS), poly(tertiary-butylstyrene) (PtBS), and poly(α-methylstyrene) (FαMS) were anionically polymerized and subsequently saturated using heterogeneous hydrogenation techniques to poly(vinylcyclohexane) (PVCH), poly(2-methylvinylcyclohexane) (P2MVCH), poly(3-methylvinylcyclohexane) (P3MVCH), poly(4-methylvinylcyclohexane) (P4MVCH), and poly(tertiary-butylvinylcyclohexane) (PtBVCH), respectively. In each case, except PαMS, the materials were saturated to > 99% conversion with no chain degradation. PS hydrogenations required the addition of small amounts of tetrahydrofuran to the reaction solvent cyclohexane to enhance miscibility and eliminate large-scale chain degradation. Density gradient and differential scanning calorimetry (DSC) measurements were used to characterize the density and glass transition temperature, T_g, of the unsaturated and saturated polymers. Saturation reduces the density by 3% to 11% and changes T_g substantially. The greatest variation in T_g is obtained with the 3-methyl substituted species where a 63°C increase is observed, while the highest measured T_g is 186°C for P2MVCH. Small-angle neutron scattering (SANS) experiments on binary mixtures of hydrogenous and deuterium labeled PVCH derivatives provided a determination of bulk chain statistics. The statistical segment length is relatively insensitive to vinylcyclohexane ring substitution, except with P3MVCH where a 20% greater value is obtained. ©1995 John Wiley & Sons, Inc.     

Synthesis and properties of poly (diphenylacetylenes) having aliphatic para-substituents

1-(p-t-Butylphenyl)-2-phenylacetylene and 1-(p-n-butylphenyl)-2-phenylacetylene were polymerized in catalytic systems based on TaCl₅ to give new polymers in high yields. These monomers were more reactive than diphenylacetylene (DPA) in copolymerization. Unlike poly (DPA), the present polymers were soluble in toluene, CHCl₃, etc. owing to the high configurational entropy induced by the para-substituents. Their relative weight-average molecular weights determined by GPC were in the range of 6 × 10⁵–36 × 10⁵, and films could be obtained by solution casting. These polymers were fairly thermally stable, as seen from their high onset temperatures (320–380°C) of weight loss in TGA in air. The oxygen permeability coefficient of the polymer with t-Bu group was 1100 barrers, the highest among those of all the hydrocarbon polymers. © 1994 John Wiley & Sons, Inc.     

Gelatin/poly(aniline) composite films: Synthesis and characterization

In this work, glyoxal (Glox) - crosslinked gelatin (Gel) films have been loaded with aniline molecules, followed by their in-situ oxidative polymerization to yield Gel/poly(Ani) composite films. The films, so prepared, have been characterized by FTIR, XRD, TGA and AFM analysis. The water absorption of these films has been studied in the physiological fluid of pH 7.4 at 37°C.The dynamic water uptake data has been interpreted by various kinetic models such as power function model and Schott kinetic model. The various diffusion coefficients have also been evaluated.     

Synthesis and characterization of model 3‐miktoarm star copolymers of poly(dimethylsiloxane) and poly(2‐vinylpyridine)

3‐Miktoarm star copolymers, 3μ‐D₂V, with two poly(dimethylsiloxane) (PDMS) and one poly(2‐vinylpyridine) (P2VP) arm, were synthesized by using anionic polymerization–high vacuum techniques and (chloromethylphenylethyl)methyl dichlorosilane, heterofunctional linking agent, with two SiCl groups and one CH₂Cl group. The synthetic strategy involves the selective reaction of the two ? SiCl groups with PDMSOLi living chains, followed by reaction of the remaining chloromethyl group with P2VPLi. Combined molecular characterization results (size exclusion chromatography, membrane osmometry, and ¹H NMR spectroscopy) revealed a high degree of structural and compositional homogeneity. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 614–619, 2006     

Synthesis and characterization of poly(2‐methacryloyloxyethyl phosphorylcholine) onto graphene oxide

The polyzwitterionic brushes comprised of poly(2‐methacryloyloxyethyl phosphorylcholine) (pMPC) segments, which are used for surface modification of polymers and biocompatible coatings, were investigated. In this work, reverse surface‐initiated atom transfer radical polymerization (RATRP) of zwitterionic 2‐methacryloyloxyethyl phosphorylcholine (MPC) is employed to tailor the functionality of graphene oxide (GeneO) in a well‐controlled manner and produce a series of well‐defined hemocompatible hybrids (termed as GeneO‐g‐pMPC). The complexes were characterized by FT‐IR, XRD, and Raman. Results show that MPC has been coordinated on the graphene oxide sheet. Thermal stability of the nanocomposites in comparison with the neat copolymer is revealed by thermogravimetric analysis and differential thermal analysis. Scanning electron microscopy and transmission electron microscope images of the nanoconposite displays pMPC chains were capable of existing on GeneO sheet by RATRP. The biocompatibility properties were measured by plasma recalcification profile tests, hemolysis test, and MTT assays, respectively. The results confirm that the pMPC grafting can substantially enhance the hemocompatibility of the GeneO particles, and the GeneO‐g‐pMPC hybrids can be used as biomaterials without causing any hemolysis. With the versatility of RATRP and the excellent hemocompatibility of zwitterionic polymer chains, the GeneO‐g‐pMPC nanoparticles with desirable blood properties can be readily tailored to cater to various biomedical applications. Copyright © 2013 John Wiley & Sons, Ltd.     

Synthesis and properties of poly(1‐naphthylacetylene) and poly(9‐anthrylacetylene)

Polymerizations of 1‐naphthylacetylene (1‐NA) and 9‐anthrylacetylene (9‐AA) by various transition metal catalysts were studied, and properties of the polymers were clarified. 1‐NA polymerized with WCl₆‐based catalysts to offer dark purple polymers in good yield. Especially, a binary catalyst composed of WCl₆ and Ph₃Bi gave a polymer with high molecular weight (M_w = 140×10³) and sufficient solubility in common solvents. The use of Mo and Rh catalysts, in contrast, resulted in the formation of insoluble red poly(1‐NA)s. 9‐AA gave insoluble polymers by both WCl₆‐ and MoCl₅‐based catalysts in moderate to good yields. Copolymerization of 9‐AA with 1‐NA by WCl₆–Ph₃Bi provided a soluble copolymer which exhibited the largest third‐order nonlinear optical susceptibilities (χ⁽³⁾(−3ω; ω, ω, ω) = 40×10⁻¹²) among all the substituted polyacetylenes synthesized so far. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 277–282, 1999     

Synthesis,geometric structure,and properties of poly(phenylacetylenes) with bulky para-substituents

Phenylacetylenes (PAs) with bulky substituents (adamantyl, tert-butyl, and n-butyl groups) at the para-position polymerized in good yields with Fe, Rh, Mo, and W catalysts. The formed polymers were soluble, and their number-average molecular weights were in the range of thousands to hundred thousands. Whereas it is known that the poly(PA) obtained with the Fe catalyst is an insoluble cis-cisoidal polymer, the present polymers formed with the same catalyst were totally soluble in many solvents such as benzene and CHCl₃. The ¹H- and ¹³C-NMR and DSC data revealed that both of the polymers formed with the Fe and Rh catalysts had virtually all-cis structures, while those with the Mo and W catalysts had cis-rich and trans-rich structures, respectively. Cis-cisoidal and cis-transoidal structures of para-substituted poly(PAs) could not be distinguished because of their good solubility. The bulky substituents raised the temperature of cis–trans isomerization and improved the thermal stability of the polymers. Poly(p-t-BuPA) showed gas permeability higher than that of poly(PA). © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 3157–3163, 1998     

Synthesis and ionic conductivity of hyperbranched poly(glycidol)

A novel hyperbranched poly(glycidol) (HPG) was prepared and characterized. The synthesized HPG was used as a substrate of a polymer electrolyte. The ionic conductivity of a blend of HPG, polyurethane (PU), and salt was studied. The ionic conductivity of HPG/PU/LiClO₄ was about 6.6 × 10^?6 S · cm^?1 at 20 °C and 6.3 × 10^?4 S · cm^?1 at 60 °C. The results indicated that HPG showed higher solubility for salt than linear polyether when both had the same [O]/[Li⁺] molar ratio. The main reason was that more cavities and a lower degree of chain entanglement in HPG resulted in a lower glass‐transition temperature and were beneficial for decreasing the aggregation of salt or enhancing the ionic conductivity. © 2001 John Wiley & Sons, Inc. J Polym Sci Part B: Polym Phys 39: 2225–2230, 2001