A METHOD OF PREPARING SPHERICAL NANO-CRYSTAL CELLULOSE WITH MIXED CRYSTALLINE FORMS OF CELLULOSE Ⅰ AND Ⅱ

A new kind of nano-crysta cellulose (NCC) prepared from natural cotton fiber has been obtained by the method ofacid hydrolysis. Compared to most other nanophase materials that derive from inorganic materials, our products are preparedfrom natural cotton fibers. The products are of spherical shape with mixed crystal forms of cellulose I and II. The preparationconditions determine the properties of the products. Prior treatment is a critical procedure. The properties of the products arealso strongly affected by such conditions as the kinds of acids used, the ratio of the acid mixture, the acid concentration, theultrasonic agitation time and hydrolysis temperature. The number average molecular weight of NCC is determined by gelpermeation chromatography (GPC). The particle size and shape were determined by transmission electron microscopy(TEM). X-ray diffraction was used to detect the crystallinity and average crystallite size of the panicle.     

Physicochemical properties of chemically and enzymatically modified cellulosic surfaces

Surface characteristics of modified cotton fibers have been studied using electrokinetic analysis (EKA), inverse gas chromatography (IGC) and dynamic contact angle (DCA) determinations. Modifications of cotton surfaces included mercerization, water-proofing, cross-linking, dyeing with a bifunctional reactive dye and cellulase biopolishing. Comparisons are made to linen as an example of a natural cellulosic fiber other than cotton and to rayon as a representative of a regenerated cellulosic fiber. Generally all cellulosic surfaces were bipolar with a slightly higher acidic contribution in the case of the cotton samples. EKA indicated ion dissociation as the predominant mechanism for surface charge in aqueous medium for all cellulosic samples, with the exception of greige cotton and the cotton sample with the hydrophobic finish. Results from EKA and IGC showed good correlation, while DCA yielded unreasonably high basic contributions most likely due to fiber swelling.     

High resistance to thermal decomposition in brown cotton is linked to tannins and sodium content

Brown cotton fibers (SA-1 and MC-BL) studied were inferior to a white cotton fiber (Sure-Grow 747) in fiber quality, i.e., a shorter length, fewer twists, and lower crystallinity, but showed superior thermal resistance in thermogravimetric, differential thermogravimetric, and microscale combustion calorimetric (MCC) analyses. Brown cotton fibers yielded 11–23 % smaller total heat release and 20–40 % greater char. Washing fibers in water and a 1 % NaOH solution showed that rich natural inorganic components and the condensed tannins present in brown cotton are responsible for the unusual thermal property. The loss of inorganics from white cotton during a water wash increased the thermal decomposition temperature of cellulose, resulting in no char yield. However, the stronger binding of metal ions for brown cotton as well as its dominant adsorption of sodium ions after a 1 % NaOH wash facilitated the low-temperature thermal-reaction route; the sodium content showed a significant negative correlation with the heat release capacity of the fiber. Condensed tannins greatly enhanced the adsorption of sodium ions to the fiber and exhibited inherent thermal stability. The limiting oxygen indices (LOI) calculated from the MCC parameters indicated the slower burning characteristic of brown cotton, and its LOI was further increased upon adsorption of sodium ions.     

Plasma-Aided Cotton Bioscouring: Dielectric Barrier Discharge Versus Low-Pressure Oxygen Plasma

The hydrophobic cuticle of the cotton fiber has formed a natural barrier for pectinase to catalyze its substrates (pectins beneath the cuticle), thus resulting in an insufficient scouring for cotton. Two plasma-based treatments, dielectric barrier discharge (DBD) at atmospheric pressure and cold oxygen plasma at low pressure in a vacuum system, were used as the pretreatments prior to cotton bioscouring, aiming at increasing the accessibility of pectinases to the pectic substances on the cotton fiber. The effects of different processing parameters of DBD and oxygen plasmas on the wettability, whiteness and burst strength of pectinase-scoured cotton were determined and compared. Although both of the pretreatments could enhance cotton bioscouring, DBD might be more suitable for current bioscouring due to its continuous processing mode and lower requirements to the equipment.     

Structural Properties and Potential Applications of Cellulose Nanofiber from Bamboo Shoot Shell

Bamboo shoot shell(BSS),a by-product from bamboo shoot processing industries,is a natural resource of cellulose. In this study,high-pressure homogenization assisted with acidolysis treatment was employed to produce BSS cellulose nanofiber(CNF),and the structure was characterized by powder X-ray diffraction(XRD),Fourier-transform infrared(FT-IR) spectroscopy,atomic force microscopy(AFM),high resolution transmission electron microscopy(HTTEM),thermogravimetric analysis(TGA),and ~(13) C nuclear magnetic resonance(NMR). Moreover,the structure and properties of CNF were compared with those of BSS insoluble dietary fiber(IDF). The results showed that CNF was in the form of a grid-like micro fiber,and its particle size was obviously reduced,while the crystallinity,thermal stability and solubility were increased. The results indicated that high-pressure homogenization assisted with acidolysis treatment was an effective method to prepare the BSS CNF,which could be a promising biopolymer reinforced material.     

An efficient protein preparation for proteomic analysis of developing cotton fibers by 2-DE

Preparation of high-quality proteins from cotton fiber tissues is difficult due to high endogenous levels of polysaccharides, polyphenols, and other interfering compounds. To establish a routine procedure for the application of proteomic analysis to cotton fiber tissues, a new protocol for protein extraction was developed by optimizing a phenol extraction method combined with methanol/ammonium acetate precipitation. The protein extraction for 2-DE was remarkably improved by the combination of chemically and physically modified processes including polyvinylpolypyrrolidone (PVPP) addition, acetone cleaning, and SDS replacement. The protocol gave a higher protein yield and vastly greater resolution and spot intensity. The efficiency of this protocol and its feasibility in fiber proteomic study were demonstrated by comparison of the cotton fiber proteomes at two growth stages. Furthermore, ten protein spots changed significantly were identified by MS/tandem MS and their potential relationships to fiber development were discussed. To the best of our knowledge, this is the first time that a protocol for protein extraction from cotton fiber tissues appears to give satisfactory and reproductive 2-D protein profiles. The protocol is expected to accelerate the process of the proteomic study of cotton fibers and also to be applicable to other recalcitrant plant tissues.     

Flexible microfluidic cloth-based analytical devices using a low-cost wax patterning technique

This paper describes the fabrication of microfluidic cloth-based analytical devices (μCADs) using a simple wax patterning method on cotton cloth for performing colorimetric bioassays. Commercial cotton cloth fabric is proposed as a new inexpensive, lightweight, and flexible platform for fabricating two- (2D) and three-dimensional (3D) microfluidic systems. We demonstrated that the wicking property of the cotton microfluidic channel can be improved by scouring in soda ash (Na(2)CO(3)) solution which will remove the natural surface wax and expose the underlying texture of the cellulose fiber. After this treatment, we fabricated narrow hydrophilic channels with hydrophobic barriers made from patterned wax to define the 2D microfluidic devices. The designed pattern is carved on wax-impregnated paper, and subsequently transferred to attached cotton cloth by heat treatment. To further obtain 3D microfluidic devices having multiple layers of pattern, a single layer of wax patterned cloth can be folded along a predefined folding line and subsequently pressed using mechanical force. All the fabrication steps are simple and low cost since no special equipment is required. Diagnostic application of cloth-based devices is shown by the development of simple devices that wick and distribute microvolumes of simulated body fluids along the hydrophilic channels into reaction zones to react with analytical reagents. Colorimetric detection of bovine serum albumin (BSA) in artificial urine is carried out by direct visual observation of bromophenol blue (BPB) colour change in the reaction zones. Finally, we show the flexibility of the novel microfluidic platform by conducting a similar reaction in a bent pinned μCAD.     

Growing degree days is the dominant factor associated with cellulose deposition in cotton fiber

Two field experiments were conducted to study the effect of temperatures on the cellulose content of cotton fiber at various stages of fiber development. In the first study, cotton was sown on three different dates so that temperatures were different during fiber development. In the second study, cotton was grown in semi-mobile chambers and night-time temperatures were controlled within the chambers. During the period from anthesis until the onset of rapid cellulose deposition, the average cellulose deposition rate was significantly correlated with growing degree days (GDD) and daily minimum temperature. The onset time of rapid cellulose deposition was significantly affected by GDD and daily maximum temperature. During the period of rapid cellulose deposition, the duration of rapid cellulose deposition and the average rate of cellulose deposition were significantly correlated with GDD. Therefore, GDD had the largest effect on cellulose deposition cotton fiber. The requisite number of GDD during cellulose synthesis must be reached during two stages of cotton fiber development in order to maximize cellulose content. The average cellulose deposition rate between anthesis and the onset of rapid cellulose deposition can be increased by warmer daily minimum. Warmer daily maximum temperatures advanced the onset of rapid cellulose deposition. The cellulose content of cotton fiber is also be affected by conditions during the period of rapid cellulose deposition. Cellulose contents are highest when cellulose accumulates at moderate rates during this period and when the duration of rapid cellulose deposition is long as possible.     

2.3 Wood pulp manufacturing and quality characteristics

Cellulose acetate being important in the fiber and textile industries is usually prepared from high quality cellulose such as cotton linters and wood pulps with an alpha cellulose content of more than 95%. In this section, therefore, wood pulps and cotton linters appropriate for cellulose acetate production were discussed in their chemical and physical properties so as to use them judiciously as natural raw materials for cellulose acetate production.     

Reverse Thinking of the Aggregation-Induced Emission Principle: Amplifying Molecular Motions to Boost Photothermal Efficiency of Nanofibers**

Using reverse thinking of the aggregation-induced emission (AIE) principle, we demonstrate an ingenious and universal protocol for amplifying molecular motions to boost photothermal efficiency of fibers. Core–shell nanofibers having the olive oil solution of AIE-active molecules as the core surrounded by PVDF-HFP shell were constructed by coaxial electrospinning. The molecularly dissolved state of AIE-active molecules allows them to freely rotate and/or vibrate in nanofibers upon photoexcitation and thus significantly elevates the proportion of non-radiative energy dissipation, affording impressive heat-generating efficiency. Photothermal evaluation shows that the core–shell nanofibers with excellent durability can reach up to 22.36 % of photothermal conversion efficiency, which is 26-fold as the non-core–shell counterpart. Such a core–shell fiber can be used for photothermal textiles and solar steam generation induced by natural sunlight with green and carbon-zero emission.     

Preparation and characterization of flame‐retardant lamellar Mg(OH)2 thin films on citric acid‐treated cotton fabrics

Preparation and characterization of lamellar magnesium hydroxide (Mg(OH)₂) thin films on cotton fabrics are reported in this paper. Mercerized cotton fabrics were treated with citric acid, so carboxyl groups were introduced to the surface of the fabrics. Mg(OH)₂ seeds were first adsorbed on the citric acid‐treated cotton fabrics and then Mg(OH)₂ thin films grew on the fabric through secondary growth method. Kinetics and isotherm studies found that the adsorption of Mg(OH)₂ seeds on citric acid‐treated cotton fabrics followed pseudo second‐order kinetic model and Langmuir isotherm. This indicated that Mg(OH)₂ seeds adsorption was monolayer chemical adsorption driven by electric attraction between positively charged Mg(OH)₂ seeds and ? COO^? ions on the cotton fiber surface. The X‐ray diffraction (XRD) and SEM characterizations of the Mg(OH)₂ thin films covered cotton fabrics found that standing flaky Mg(OH)₂ crystals formed a shell of porous but continuous network on cotton fabric surface. Owing to the Mg(OH)₂ thin film covering, the fabric had fireproof property, lower thermal conductivity and higher optical absorbance in the UV, Vis and IR regions. Copyright © 2010 John Wiley & Sons, Ltd.     

Selected configuration interaction with truncation energy error and application to the Ne atom

Selected configuration interaction (SCI) for atomic and molecular electronic structure calculations is reformulated in a general framework encompassing all CI methods. The linked cluster expansion is used as an intermediate device to approximate CI coefficients B(K) of disconnected configurations (those that can be expressed as products of combinations of singly and doubly excited ones) in terms of CI coefficients of lower-excited configurations where each K is a linear combination of configuration-state-functions (CSFs) over all degenerate elements of K. Disconnected configurations up to sextuply excited ones are selected by Brown's energy formula, Delta E(K) = (E-H(KK))B(K)2/(1-B(K)2), with B(K) determined from coefficients of singly and doubly excited configurations. The truncation energy error from disconnected configurations, Delta E(dis), is approximated by the sum of Delta E(K)s of all discarded Ks. The remaining (connected) configurations are selected by thresholds based on natural orbital concepts. Given a model CI space M, a usual upper bound E(S) is computed by CI in a selected space S, and E(M) = E(S) + Delta E(dis) + delta E, where delta E is a residual error which can be calculated by well-defined sensitivity analyses. An SCI calculation on Ne ground state featuring 1077 orbitals is presented. Convergence to within near spectroscopic accuracy (0.5 cm(-1)) is achieved in a model space M of 1.4 x 10(9) CSFs (1.1 x 10(12) determinants) containing up to quadruply excited CSFs. Accurate energy contributions of quintuples and sextuples in a model space of 6.5 x 10(12) CSFs are obtained. The impact of SCI on various orbital methods is discussed. Since Delta E(dis) can readily be calculated for very large basis sets without the need of a CI calculation, it can be used to estimate the orbital basis incompleteness error. A method for precise and efficient evaluation of E(S) is taken up in a companion paper.     

Investigation on sound absorption properties of kapok fibers

Sound absorption properties of natural kapok fibers have been investigated. Kapok fibrous assemblies with different bulk density, thickness, fiber length and orientation were manufactured, and their acoustical performances were evaluated by using an impedance tube instrument. Results show that the kapok fiber has excellent acoustical damping performance due to its natural hollow structure, and the sound absorption coefficients of kapok fibrous assemblies are significantly affected by the bulk density, thickness and arrangement of kapok fibers but less dependent on the fiber length. Compared with assemblies of commercial glass wool and degreasing cotton fibers, the kapok fiber assemblies with the same thickness but much smaller bulk density may have the similar sound absorption coefficients. Theoretical modelling of the acoustical damping performance of kapok fibers shows a good agreement with the experimental data. All the results demonstrate that kapok fiber is a promising light and environment-friendly sound absorption material.     

Silica–silver core–shell particles for antibacterial textile application

The silica–silver core–shell particles were synthesized by simple one pot chemical method and were employed on the cotton fabric as an antibacterial agent. Extremely small (1–2 nm) silver nanoparticles were attached on silica core particles of average 270 nm size. The optimum density of the nano silver particles was found which was sufficient to show good antibacterial activity as well as the suppression in their surface plasmon resonance responsible for the colour of the core–shell particle for antibacterial textile application. The change in the density and size of the particles in the shell were monitored and confirmed by direct evidence of their transmission electron micrographs and by studying surface plasmon resonance characteristics. The colony counting method of antibacterial activity testing showed excellent results and even the least silver containing core–shell particles showed 100% activity against bacterial concentration of 10⁴ colony counting units (cfu). The bonding between core–shell particles and cotton fabric was examined by X-ray photoelectron spectroscopy. The antibacterial activity test confirmed the firm attachment of core–shell particles to the cotton fabric as a result 10 times washed sample was as good antibacterial as that of unwashed sample. The bacterial growth was inhibited on and beneath the coated fabric, at the same time no zone of inhibition which occurs due to the migration of silver ions into the medium was observed indicating immobilization of silver nanoparticles on silica and core–shell particles on fabric by strong bonding.     

Coloring properties of novel 1,4-distyrylbenzene and 4,4′-distyrylbiphenyl fluorescent brighteners and their arrangement in cotton and polyester fiber

Some novel 1,4-distyrylbenzene (DSB) and 4,4′-distyrylbiphenyl (DSBP) fluorescent brighteners (FBs) were used to dye polyester and cotton fabrics. The CIE whiteness, color hue and reflectance spectrum of dyed fabrics were compared. DSBP derivatives could dye the cotton and polyester fabrics with a higher whiteness level and had a lower fluorescent quenching concentration than DSB derivatives. The color hue for the fabric dyed with DSB FBs was yellow-green, whereas that dyed with DSBP was blue–violet. The molecular arrangement in the fiber had a significant influence on their optical properties, resulting in different coloring properties. The increase in molecule planarity and rigidity generated by the interaction between the polymer and FB molecules caused a remarkable bathochromic shift in emission and excitation spectra. The H-aggregate of the DSB molecule in the fiber was easily generated, and the degree of aggregation increased with the molecular polarity. However, the aggregation of DSBP molecules in the polyester and cotton fiber was not found. The surface region of the cotton fiber was filled with FB molecules, whereas FB molecules in the polyester fiber aggregated easily, and incident light could pass through the surface region.     

Mechanical reinforcement and water repellency induced to cellulose sheets by a polymer treatment

The present study reports a simple method to control the mechanical and surface properties of cellulose fiber networks and to protect them from humidity, without altering their initial morphology. This is achieved by dip coating the fiber networks in solutions containing different amounts of ethyl cyanoacrylate monomer (ECA). Under ambient humidity and due to the presence of the -OH groups of the cellulose, the ECA polymerizes around each individual cellulosic fiber forming a thin poly(ethyl cyanoacrylate) (PECA) shell. PECA was found to interact with the cellulose surface via hydrogen bonding as evidenced by Fourier transform infrared spectroscopy and thermogravimetric analysis measurements. The detailed surface characterization reveals that only 3.5 wt% of ECA in solution is sufficient to form compact PECA cladding around every cellulose fiber. After the proposed treatment the cellulose sheets become hydrophobic, well protected from the environmental humidity and with increased Young’s modulus.     

Using atmospheric pressure plasma for enhancing the deposition of printing paste on cotton fabric for digital ink-jet printing

Atmospheric pressure plasma (APP) treatment was applied as a pretreatment process to enhance the deposition of printing paste in order to improve the final colour properties of digital ink-jet printed cotton fabrics. Three printing pastes containing natural polymers, i.e. (1) sodium alginate, (2) chitosan and (3) sodium alginate-chitosan mixture, were prepared separately. After APP treatment, cotton fabric was padded with different printing pastes prior to digital ink-jet printing. Experimental results showed that APP pretreatment could increase the colour yield of the digital ink-jet printed cotton fabric significantly even after washing. In addition, other properties such as colour fastness to crocking, colour fastness to laundering, outline sharpness and anti-bacterial properties were also improved when compared with those of the control cotton fabric printed without APP pretreatment. However, the influence of printing paste on the colour properties of the digital ink-jet printed cotton fabrics depended very much on the composition of the printing paste. The scanning electron microscope images evidenced that the APP treatment could enhance the deposition of printing paste on the cotton fabric surface as proved qualitatively by both the contact angle and wetting time measurement as well as quantitatively by both the X-ray photoelectron spectroscopy and carboxyl group/nitrogen content analysis.     

Antibacterial cotton fabric prepared by a “grafting to” strategy using a QAC copolymer

Quaternary ammonium compounds (QACs) have outstanding antimicrobial effect, but covalent immobilization of plentiful QAC onto cotton fiber surface to realize a durable function remains a challenge. Herein, a quaternary ammonium monomer, [2-(methacryloyloxy) ethyl] trimethylammonium chloride (DMC) was co-polymerized with methyl acrylate (MA) to prepare an antibacterial copolymer, poly(DMC-co-MA). To graft the copolymer with an improved grafting efficiency, cotton fabric was treated using carboxymethyl chitosan (CMC) to establish an amino-functionalized fiber surface first. This treatment allows the amidation reactions between the amino groups and the pendant ester groups in the poly(DMC-co-MA) to take place, achieving a durable anionic polymer coating onto the fiber surfaces with remarkably antibacterial effect. Characterization results indicated that when DMC/MA monomer ratio was 100:1, the resulting copolymer endows the modified cotton fabric with antibacterial capability that inactivates all Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus). Even after 50 laundering cycles, more than 98.0% of the antibacterial rate could still be retained. Moreover, the wearing comfort properties such as softness, water absorption and air permeability of the finishing cotton fabrics have been insignificantly changed by comparing to the untreated cotton fabric.

     

Chemically modified kapok fiber for fast adsorption of Pb2+, Cd2+, Cu2+ from aqueous solution

Kapok fiber, a natural hollow fiber with thin shell and large cavity, has rarely been used as adsorbent for heavy metal ions. In this paper, kapok fibers were modified with diethylenetriamine pentaacetic acid (DTPA) after hydrophilicity treatment. The adsorption behavior of the resultant kapok-DTPA influenced by pH, adsorption time and initial concentration of metal ion was investigated. The results demonstrate that adsorption equilibrium was reached within 2 min for Pb²⁺ and Cd²⁺. Adsorption kinetics showed that the adsorption rate was well fitted by pseudo-second-order rate model. The adsorption isotherms were studied, and the best fit was obtained in the Langmuir model. The maximum adsorption capacities of kapok-DTPA were 310.6 mg g^?1 for Pb²⁺, 163.7 mg g^?1 for Cd²⁺, 101.0 mg g^?1 for Cu²⁺, respectively. After eight desorption and re-adsorption loops, the lost adsorption capacities for Pb²⁺ and Cu²⁺ were less than 10 %. Because of the large specific area derived from the hollow fiber structure, kapok-DTPA exhibited much better adsorption capacity compared with many other reported adsorbents based on natural materials.     

Microstructural order in the developing cotton fiber based on availabilities of hydroxyl groups

The relative availabilities of accessible O(2)H, O(3)H, and O(6)H in the cellulose of developing cotton fibers were measured by conducting a reaction to a low degree of substitution under mild conditions in an aqueous medium. Raw cotton fibers from unopened bolls and from mature, opened bolls were studied. Correction was made for the presence of a β-1,3-glucan that was detected by substitution at the abundant O(4)H of this polysaccharide. The order of decreasing availability of hydroxyl groups of cellulose was O(2)H > O(6)H > > O(3)H. Results indicate that cellulose in the secondary wall of the cotton fiber is laid down with a high degree of order and that this order decreases with opening of the boll.