Bioinspired dual dynamic network hydrogels promote cartilage regeneration through regulating BMSC chondrogenic differentiation

How to improve the therapeutic efficacy of cell delivery during mechanical injection has been a great challenge for tissue engineering. Here, we present a facile strategy based on dynamic chemistry to prepare injectable hydrogels for efficient stem cell delivery using hyaluronic acid (HA) and poly(γ-glutamic acid) (γ-PGA). The combination of the guest–host (GH) complexation and dynamic hydrazone bonds enable the HA/γ-PGA hydrogels with physical and chemical dual dynamic network and endow hydrogels a stable structure, rapid self-healing ability, and injectability. The mechanical properties, self-healing ability, and adaptability can be programmed by changing the ratio of GH network to hydrazine bond cross-linked network. Benefitting from the dynamic cross-linking networks, mild preparation process, and cytocompatibility of HA/γ-PGA hydrogels, bone marrow mesenchymal stem cells (BMSCs) show high cell viability in this system following mechanical injection. Moreover, HA/γ-PGA hydrogels can promote BMSC proliferation and upregulate the expression of cartilage-critical genes. Notably, in a rabbit auricular cartilage defect model, BMSC-laden HA/γ-PGA hydrogels can effectively promote cartilage regeneration. Together, we propose a general strategy to develop injectable self-healing HA/γ-PGA hydrogels for effective stem cell delivery in cartilage tissue engineering.     

Preparation and characterization of new hydrogels based on hyaluronic acid and α,β-polyaspartylhydrazide

Hyaluronic acid (HA) has been crosslinked with α,β-polyaspartylhydrazide (PAHy). The crosslinking reaction has been performed in acidic medium in the presence of various amounts of N-ethyl-N′-(3-dimethylaminopropyl)-carbodiimide hydrochloride (EDC). All obtained samples have been characterized by FT-IR analysis and swelling measurements in double distilled water that have confirmed the occurrence of a chemical linkage between two polymers and the affinity towards aqueous medium of HA-PAHy networks, respectively.In vitro degradation assays have been performed in simulated physiological conditions as well as in the presence of hyaluronidase. Experimental data evidenced that HA-PAHy samples undergo a poor chemical and a reduced enzymatic degradation unlike native HA.     

Self-assembled small molecular weight hydrogels of prodrugs

Prodrugs as building unit for construction of various hydrogelator in response to different stimulus (e.g., temperature, enzyme, pH value, ion).     

Electrical conductivity measurements of hyaluronic acid and collagen

Electrical properties of hyaluronic acid (HYA) and collagen in the temperature range from –90°C (resp. –50°C for collagen) to 40°C are described. The value and type of electrical conductivity, temperature stability, and processes arising in the investigated samples during continual stress heating are determined by the measurements of temperature dependence of the electrical conductivity (both d.c. and a.c.).     

Synthesis of pH‐responsive photocrosslinked hyaluronic acid‐based hydrogels for drug delivery

Photocrosslinked hyaluronic acid/poly(vinyl alcohol)‐styrylpyridinium (HA/PVA‐SbQ) hydrogels were synthesized for controlled antitumor drug delivery. The photocrosslinking reaction was rapid, and the time required for completely converting into the insoluble hydrogels was less than 500 s on exposure to 5 mW/cm² UV light irradiation. The resulting hydrogels exhibited sensitivity to the pH value of the surrounding environment. Scanning electron microscopic analysis revealed that the morphology and the pore size of the hydrogels could be controlled by changing the ratio of HA and PVA‐SbQ in the formulations. Paclitaxel (PTX)‐loaded hydrogel could also be formed rapidly by UV irradiation of a mixed solution of HA/PVA‐SbQ and PTX. Release profiles of PTX from the hydrogels showed pH‐dependent and sustained manner. Moreover, our data revealed that PTX released from the HA hydrogels remained biologically active and had the capability to kill cancer cells. In contrast, control groups of HA hydrogels without PTX did not exhibit any cytotoxicity. This study demonstrates the feasibility of using HA‐based hydrogels as a potential carrier for chemotherapeutic drugs for cancer treatments. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Separation of hyaluronic acid by ultrahigh-voltage capillary gel electrophoresis

Hyaluronic acid was separated using 95 kV applied potential in a polyacrylamide gel-filled capillary. The results of this separation were compared to those obtained using a capillary electrophoresis instrument operated at a more conventional potential of 15 kV. For lower-molecular-weight oligomers, the separation efficiency was found to improve by about tenfold, and the resolution by about threefold. However, the improvement in resolution declined as the polymer molecular weight increased.     

Structural elucidation of hyaluronic acid gels after heat sterilisation

The influence of heat sterilisation and hyaluronic acid (HA) concentration on the micro- and macrostructure of HA hydrogels was investigated. HA hydrogels of different concentrations were prepared and heat sterilised. The microstructures of the polymer gels were characterised by positron annihilation lifetime spectroscopy (PALS) based on their ortho-positronium lifetime values and distributions, while their macrostructures were characterised by rheological measurements. As expected, the heat sterilisation modified both the micro- and macrostructures of the gels. The HA concentration was also observed to influence the hydrogel structure. At a concentration of 7.5 mg/ml HA, the thermal treatment did not cause significant microstructural changes, and the viscoelastic properties of the treated gels were similar to those of the untreated samples.     

Recent advances of injectable hydrogels for drug delivery and tissue engineering applications

Injectable hydrogel is a kind of in situ gelling system but has its specificity on the process procedure, which requires a better control of gelation kinetics. Hydrogels with injectability under mild condition are preferred in the field of biomedicine, especially for drug delivery and tissue engineering, because of the favorable carrier property in three-dimension, biocompatibility, low invasive and adaptable shape for administration. Despite the advantages, the development of injectable hydrogels may also face some challenges to meet the various clinical requirements. In this review, we provide a brief summary on the recent progresses on the design, synthesis and evaluation of injectable hydrogels towards biomedical applications.     

Preparation and properties of redox responsive modified hyaluronic acid hydrogels for drug release

A series of oxidized hyaluronic acid (oxi‐HA)/3,3′‐dithiobis (propionohydrazide) (DTP) redox responsive hydrogels by Schiff base reaction under physiological conditions were designed and prepared. The influence of the concentration of oxi‐HA and DTP on rheological properties, equilibrium swelling ratio, and degradation rate were investigated. All oxi‐HA/DTP hydrogels exhibited good rheological properties, high equilibrium swelling ratio, low degradation rate, and sustainable drug release properties, and the comprehensive performance of oxi‐HA5/DTP6 hydrogel was better than that of others. The redox responsiveness was evaluated by means of degradation and in vitro bovine serum albumin release behavior investigation with the stimulus of different concentration of dithiothreitol as reducing agent. The intelligent hydrogels could be potentially applied in the fields of drug delivery system, tissue engineering, or cell scaffold materials. Copyright © 2017 John Wiley & Sons, Ltd.     

A hyaluronic acid dispersed carbon nanotube electrode used for a mediatorless NADH sensing and biosensing

A biocompatible nanocomposite consisting of single-walled carbon nanotubes (CNTs) dispersed in a hyaluronic acid (HA) was investigated as a sensing platform for a mediatorless electrochemical detection of NADH. The device was characterised by scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR) and extensively by electrochemistry. CNT-HA bionanocomposite showed more reversible electrochemistry, higher short-term stability of NADH sensing and higher selectivity of NADH detection compared to frequently used CNT-CHI (chitosan) modified GCE. Finally the performance of the sensor modified by CNT-HA was tested in a batch and flow injection analysis (FIA) mode of operation with basic characteristics revealed. The NADH sensor exhibits a good long-term operational stability (95% of the original sensitivity after 22 h of continuous operation). Subsequently a d-sorbitol biosensor based on such a nanoscale built interface was prepared and characterised with a d-sorbitol dehydrogenase used as a biocatalyst.     

Toward the modular synthesis of glycosaminoglycans: synthesis of hyaluronic acid disaccharide building blocks using a periodic acid oxidation

The synthesis of two differentially protected GluNAc-β(1→4)-GluA and GluA-β(1→3)-GluNAc disaccharide modules for the solid-phase assembly of hyaluronic acid are described. A periodic acid/chromium trioxide oxidation was the key transformation to facilitate access to the glucuronic acid moiety from glucose and should find wide application in the oxidation of primary alcohols.     

In vitro investigation of cartilage regeneration properties of polymeric ceramic hybrid composite

There would be a major effect on the cartilage regeneration characteristics of ceramic material in a substrate implant requiring biologically active biomaterials and the reinforcement phase. At this moment, we produced collagen-hyaluronic acid @ hydroxyapatite-halloysite nanotube-single walled carbon nanotube composites, which is a successful technique for making a scaffold with a superior counter for cartilage property. FTIR, XRD, and SEM-EDAX were used to perform morphological and structural studies. The prepared composite's surface feature was investigated and discovered by HRTEM-SAED analysis, and it observed porous nature. The simulated body fluids (SBF) assessment of the materials was noticed their bioactivity and chondrocytes to determine their biocompatibility. Hybrid composite displayed promise for cartilage tissue engineering despite mesenchymal stem cells compatibility effect and magnificently demonstrated an antibacterial effect without antibiotics. The live/dead cells analysis shows that the composite can significantly improve mesenchymal stem cells, and the composite has the potential ability for cartilage regeneration. The above characteristics make the material quite interesting and important in the area for regenerative medicinal uses.     

Degradation of hyaluronic acid at the metal surface

 When the viscosity of hyaluronic acid (HA) solution was measured with a rotational visco-meter, depolymerization occurred only by leaving the sample in the cup of the viscometer, while the solution in a glass test tube at the same temperature, 37 °C, was practically stable during the entire period of investigation. As the parts where the sample solution had contact with the viscometer are stainless steel, the participation of metal ions in the depolymerization was suspected. Therefore, experiments were carried out with stainless-steel beads in the HA solution. The results show that the molecular weight of HA decreased on exposure to the beads under aerobic conditions. The addition of 10 beads to 2 ml of a 0.1% HA solution prepared with 0.2 M NaCl reduced the molecular weight to about 75% of the initial value after 4 h. The degradation rate was proportional to the surface area of the beads. However, no dissolution of metal ion was detected, and therefore, this reaction was thought to proceed at the surface of the metal. Received: 26 September 1997 Accepted: 27 November 1997     

Tunable biohybrid hydrogels from coacervation of hyaluronic acid and PEO-based block copolymers

Accurately tuning the macroscopic properties of biopolymer-based hydrogels remains challenging due to the ill-defined molecular architecture of the natural building blocks. Here, we report a biohybrid coacervate hydrogel, combining the biocompatibility and biodegradability of naturally occurring hyaluronic acid (HA) with the tunability of a synthetic polyethylene oxide (PEO) -based ABA-triblock copolymer. Coacervation of the cationic ammonium or guanidinium-functionalized copolymer A-blocks with the anionic HA leads to hydrogel formation. Both mechanical properties and water content of the self-healing hydrogels can be controlled independently by altering the copolymer structure. By controlling the strength of the interaction between the polymer network and small-molecule cargo, both release rate and maximum release are controlled. Finally, we show that coacervation of HA and the triblock copolymer leads to increased biostability upon exposure to hyaluronidase. We envision that noncovalent crosslinking of HA hydrogels through coacervation is an attractive strategy for the facile synthesis of tunable hydrogels for biomedical applications.     

Iron oxide nanoparticles-loaded hyaluronic acid nanogels for MRI-aided Alzheimer's disease theranostics

Despite eye-opening advances in developing novel therapeutics for hard-to-treat diseases, treatment of Alzheimer's disease (AD) is still known as the challenge of generations. By the way, scrutinizing and shedding light on a major cause of AD, i.e., fibrillation of β amyloid (Aβ) peptides, have paved the way to find an effective therapy for this life-threatening disease in the foreseeable future. In this study, we endeavored to push forward with research on AD therapy, even as much as an inch, by fabricating and evaluating a theranostic system based on iron oxide nanoparticles-loaded hyaluronic acid nanogels (Fe₃O₄-HyA NGs). Fe₃O₄ nanoparticles were fabricated via a facile co-precipitation method and were loaded in HyA NGs in situ by formation of NGs using a thiolated HyA (HyA-SH) precursor. Standard structural analysis was performed on Fe₃O₄-HyA NGs, and the results revealed the NGs were negatively charged, which led to relatively poor adsorption of plasma proteins, and sized at the range of 120–150 nm. Also, Fe₃O₄-HyA NGs showed a superparamagnetic property with a magnetic saturation of about 62.8 emu/g indicating the successful loading of Fe₃O₄ nanoparticles. Besides, findings of the cytotoxicity analysis could primarily show the NGs did not pose a noticeable risk to normal astrocyte cells (i.e., 96.7% cell viability at 100 µg/ml after 48 h treatment). Moreover, in vitro magnetic resonance imaging (MRI) analysis could reveal the noticeable potential ability of the Fe₃O₄-HyA NGs to generate negative contrast by reducing both T2-weighted and T2*-weighted MR signal intensities with a relaxation rate (r₂) of about 120.87 (1/mM.sec). Finally, Fe₃O₄-HyA NGs exhibited a potential ability to impede Aβ aggregation by around 44% at 10 µM; also, they could induce disaggregation of Aβ fibrils by about 13% at 10 µM. Hence, Fe₃O₄-HyA NGs could be a promising choice for AD theranostics and could be further scrutinized in vitro and in vivo.     

A molecular thermodynamic model for the swelling of thermo-sensitive hydrogels

A new molecular thermodynamic model for describing the swelling behavior of thermo-sensitive hydrogels was developed. The model consists of two terms. One is the contribution of the mixing of hydrogel network and water, which is dependent on the local polymer concentration and the interaction between polymer segment and solvent. A closed packed lattice model for polymer solution developed by Yang et al. was adopted for this term. The other is the elastic contribution derived from the network elasticity, which is dependent on the cross-linking degree of gel network. The elastic Gibbs energy model based on the Gaussian chain model developed by Flory was adopted. The model equation has two parameters. One is an energy parameter ? reflecting the interaction between water and gel network, the other is a size parameter V^* that represents the cross-linking degree of the hydrogel. When the energy parameter ? is expressed as a quadratic of inverse temperature, this model can describe the swelling equilibrium behavior of neutral thermo-sensitive hydrogels quite well. The influences of model parameters were discussed in details. The experimental swelling curves of two kinds of polyacrylamide-based gels were correlated and good agreement was obtained.     

Viscoelasticity,mechanical properties,and in vivo biocompatibility of injectable polyvinyl alcohol/bioactive glass composite hydrogels as potential bone tissue scaffolds

Abstract

An injectable composite hydrogel composed of polyvinyl alcohol (PVA) and bioactive glass (BG) particles were synthesized by a physical crosslinking approach. The morphology, mechanical properties, and viscoelasticity of the PVA/BG composite hydrogel were characterized. Scanning electronic microscopy (SEM) showed uniform and homogeneous distribution of BG particles throughout the composite hydrogel. The incorporation of 2.5?wt% of BG particles in the composite hydrogel formulations, enhanced the static compressive strength and static elastic modulus by 325% and 150%, respectively. The storage molds (G′) was greater than the loss modules (G′′) at all the frequency range studied, which revealed a self-standing elastic composite hydrogel with a smooth injectability. The PVA/BG composite hydrogel was also implanted subcutaneously in the dorsal region of adult male rats. After 4?weeks of implantation, no inflammatory cells were seen within and around the implant, which indicated that the composite hydrogel was biocompatible. The properties of the synthesized injectable PVA/BG composite hydrogel demonstrate its capability toward bone regeneration.     

Characterization of structured acrylamide/acrylic acid hydrogels by TMDSC and microscopy

The thermal behavior of hydrogels synthesized by solution polymerization between acrylamide, acrylic acid and diglycidyl acrylate (DGA) as a crosslinking agent was investigated. The structure of the hydrogel can be tightly controlled with the reaction temperature. This method produces a new type of hydrogels, which exhibit well defined structures at various scales of length simultaneously. These multi-structured hydrogels are hydrophilic, elastic, water insoluble, and soft polymers with an anisotropic optical response. The structure was observed by scanning electron microscopy (SEM), polarized light microscopy (PLM) and macroscopic visualization (CCD camera). In addition, structural transitions in the hydrogels were monitored by temperature modulated differential scanning calorimetry (TMDSC). Severe heating tests in an adiabatic oven were performed to analyze decomposition of the material. Fourier transform infrared (FTIR) spectroscopy was used to qualitatively analyze the hydrogels samples exposed to a sudden thermal treatment.     

Analysis of the disaccharides derived from hyaluronic acid and chondroitin sulfate by capillary electrophoresis with sample stacking

CE conditions for monitoring the unsaturated disaccharides of hyaluronic acid (di-HA) and chondroitin sulfate (di-CS) using an alkaline tetraborate buffer, electrokinetic sample injection, and UV absorption detection at 232 nm are reported. Separations were performed in an uncoated fused-silica capillary having reversed polarity and reversed electroosmosis generated with the addition of CTAB to the buffer. The influence of various separation parameters, including the concentration of CTAB, buffer pH, concentration of tetraborate, and applied voltage, on the resolution of the two disaccharides was investigated. Baseline separation was obtained with 25 mM tetraborate at pH 10.0 and having 0.05 mM CTAB. Chloride and phosphate in the sample are beneficial for the stacking of the disaccharides, with di-HA forming a much sharper peak than di-CS. Using samples prepared in 25 mM Tris-HCl (pH 7.5) and electrokinetic injection at the cathode at -10 kV for 40 s, linear relationships between the corrected peak area and the concentration of the disaccharides have been found in the ranges of 1.0-400.0 and 0.1-1.0 microg/mL (0.2-1.0 microg/mL for di-CS), with correlation coefficients being >0.9933 in all cases. The RSDs of detection times and corrected peak areas were between 1.13-1.24 and 1.57-2.13%, respectively. Applied to human serum samples that were prepared by ethanol precipitation and depolymerization of the two polysaccharides with chondroitinase ABC reveals comigration of endogenous compounds with di-HA and a sample-dependent detection time. The di-HA content in the serum sample can be estimated via subtraction of the blank peak that is obtained without enzymatic hydrolysis.     

Direct electrochemistry and electrocatalysis of myoglobin immobilized in hyaluronic acid and room temperature ionic liquids composite film

A novel biocomposite film based on hyaluronic acid (HA) and hydrophilic room temperature ionic liquid 1-ethyl-3-methyl-imidazolium tetrafluoroborate ([EMIM][BF₄]) was explored. Here, HA was used as a binder to form [EMIM][BF₄]-HA composite film and help [EMIM][BF₄] to attaching on glass carbon electrode (GCE) surface, while doping [EMIM][BF₄] in HA can effectively reduce the electron transfer resistance of HA. The composite film can be readily used as an immobilization matrix to entrap myoglobin (Mb). A pair of well-defined and quasi-reversible redox peaks of Mb was obtained at the Mb-[EMIM][BF₄]-HA composite film modified GCE (Mb-[EMIM][BF₄]-HA/GCE) through direct electron transfer between Mb and the underlying electrode. The Mb-[EMIM][BF₄]-HA/GCE showed an excellent electrocatalytic activity toward the reduction of H₂O₂. Based on the [EMIM][BF₄]-HA biocomposite film, a third-generation reagentless biosensor could be constructed for the determination of H₂O₂.