T-shaped ionic liquid crystals based on the imidazolium motif: exploring substitution of the C-2 imidazolium carbon atom

In this contribution the first examples of so‐called rigid‐core, T‐shaped imidazolium ionic liquid crystals, in which the C‐2 atom of the imidazolium ring is substituted with an aryl moiety decorated with one or two alkoxy chains, are described. The length of the alkoxy chain(s) was varied from six to eighteen carbon atoms (n=6, 10, 14–18). Whereas the compounds with one long alkoxy chain display only smectic A phases, the salts containing two alkoxy chains exhibit smectic A, multicontinuous cubic, as well as hexagonal columnar phases, as evidenced by polarising optical microscopy, differential scanning calorimetry, and powder X‐ray diffraction. Structural models are proposed for the self‐assembly of the molecules within the mesophases. The imidazolium head groups and the iodide counterions were found to adopt a peculiar orientation in the central part of the columns of the hexagonal columnar phases. The enantiotropic cubic phase shown by the 1,3‐dimethyl‐2‐[3,4‐bis(pentadecyloxy)phenyl]imidazolium iodide salt has a multicontinuous Pm$\bar 3In this contribution the first examples of so-called rigid-core, T-shaped imidazolium ionic liquid crystals, in which the C-2 atom of the imidazolium ring is substituted with an aryl moiety decorated with one or two alkoxy chains, are described. The length of the alkoxy chain(s) was varied from six to eighteen carbon atoms (n=6, 10, 14-18). Whereas the compounds with one long alkoxy chain display only smectic A phases, the salts containing two alkoxy chains exhibit smectic A, multicontinuous cubic, as well as hexagonal columnar phases, as evidenced by polarising optical microscopy, differential scanning calorimetry, and powder X-ray diffraction. Structural models are proposed for the self-assembly of the molecules within the mesophases. The imidazolium head groups and the iodide counterions were found to adopt a peculiar orientation in the central part of the columns of the hexagonal columnar phases. The enantiotropic cubic phase shown by the 1,3-dimethyl-2-[3,4-bis(pentadecyloxy)phenyl]imidazolium iodide salt has a multicontinuous Pm ?3m structure. To the best of our knowledge, this is the first example of a thermotropic cubic mesophase of this symmetry.     

Photopolymerization kinetics of tributylmethylammonium‐based (meth)acrylate ionic liquids and the effect of water

Polymerizable ionic liquids were synthesized from the neutralization reaction between tributylmethylammonium hydroxide and methacrylic or acrylic acid, and their photopolymerization kinetics have been determined. The acrylate monomer polymerization rate exhibited a profound dependence on the water content as follows: the monomer viscosity was a strong function of the water content, increasing substantially as the water content increased from less than 5 to 30%. For the tributylmethylammonium acrylate with less than 5% water, the viscosity was 2000 times greater than that of butyl acrylate. The high viscosity is proposed to reduce both the propagation and termination steps. Both monomers exhibited an increase in rate with temperature. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 3766–3773, 2008     

单重态CCl2与O3反应的热力学及动力学性质研究

在量化计算的基础上运用统计热力学和Wigner校正的Eyring过渡态理论研究了不同温度下单重态CCl~2和臭氧O~3反应的热力学及动力学性质。计算结果表明该反应在低温下具有热力学优势,而在高温下具有动力学优势。     

Structural,thermal, and impedance properties of a gel polymer electrolyte containing ionic liquid

The gel polymer electrolytes composed of ionic liquid, 1‐butyl‐3‐methylimidazolium tetrafluoroborate (BMImBF₄) and the copolymer of acrylonitrile (AN), methyl methacrylate (MMA), poly(ethylene glycol) methyl ether methacrylate (PEGMEMA) are synthesized and characterized by FT‐IR spectra, TGA, DSC, and AC impedance measurements. IR spectra show that there is an interaction between PEO side chains of the copolymer and imidazolium cations. TGA measurements indicate that the gel polymer electrolytes are stable until 120°C. By using the equivalent circuit proposed, the experimental data and the simulated data fit very well. The bulk resistance R_b is found to decrease with the increase in BMImBF₄ content. Copyright © 2009 John Wiley & Sons, Ltd.     

Adsorption of Fe(III) from Aqueous Medium onto Glycine-Modified Chitosan Resin: Equilibrium and Kinetic Studies

The adsorption of Fe(III) onto glycine-modified chitosan (G@Chs) resin has been investigated. The parameters studied include the effects of pH, contact time, and initial metal ion concentrations by batch method. The optimal pH for the adsorption of Fe(III) was found to be 2.5. The results obtained from equilibrium adsorption studies are fitted in various adsorption models such as Langmuir and Freundlich, and each model parameter were evaluated. Kinetics and thermodynamic parameters of the adsorption process were also investigated. The maximum uptake was found to be 0.9 mmol g^?1 at 25°C.     

Volumetric,acoustic, optical and spectroscopic studies of binary mixtures of the ionic liquid, 1-butyl-3-methyl imidazolium bis(trifluoromethylsulfonyl)imide and diethyl carbonate

The properties, density, speed of sound and refractive index of ‘IL’ [Bmim][NTf2], diethyl carbonate and their binary mixtures are measured over the whole composition range as a function of temperature between 303.15 and 323.15 K at atm. pressure. These values are used to calculate the excess molar volumes, excess partial molar volumes, partial molar volumes at infinite dilution, excess isentropic compressibility, free length, speeds of sound and isobaric thermal expansion coefficient for the mixture. Various rules were used to predict the refractive indices and the data have been compared with the experimental results. These excess properties are fitted to the Redlich–Kister type equation to obtain the binary coefficients and the standard deviations. A qualitative analysis of these parameters indicates strong intermolecular interactions and the interaction increases with the increase in temperature. This was further supported by IR spectroscopy. In addition, analysis of data of the mixture was done through the Prigogine–Flory–Patterson theory.     

Novel imidazolium‐based poly(ionic liquid)s: preparation,characterization, and absorption of CO2

The development of novel materials for carbon dioxide (CO₂) capture is of great importance in resource utilization and environmental preservation. In this study, imidazolium‐based ionic liquids (ILs) with symmetrical ester and hydroxyl groups were prepared, and their corresponding polymer were synthesized by melt condensation polymerization. The structure and properties of the poly(ionic liquid)s (PILs) were characterized by proton nuclear magnetic resonance, gel permeation chromatograph, differential scanning calorimetry, X‐ray diffraction, and scanning electron microscopy. In addition, the CO₂ sorption behavior of the IL monomers and PILs were studied at a low pressure (648.4 mmHg CO₂) and under a temperature of 25°C using a thermogravimetric analyzer. The CO₂ sorption capacity of 1,3‐bis(2‐hydroxyl ethyl)‐imidazolium hexafluorophosphate ([HHIm]PF₆, 10 mol%) was the highest among all the IL monomers and PILs studied. This capacity is also much higher than those reflected of previously reported ILs. Moreover, the sorption equilibrium of [HHIm]PF₆ was achieved within a short time. Copyright © 2011 John Wiley & Sons, Ltd.     

Comparison of physicochemical properties of new ionic liquids based on imidazolium, quaternary ammonium, and guanidinium cations

More than 50 ionic liquids were prepared by using imidazolium, quaternary ammonium, and guanidinium cations and various anions. In these series, different cationic structures such as 1-benzyl-3-methylimidazolium [Bzmim]+, 1,3-dibenzylimidazolium [BzmiBz]+, 1-octyl-3-methylimidazolium [C8mim]+, 1-decyl-3-methylimidazolium [C10mim]+, tricapryl-methylammonium [Aliquat]+, benzyltriethylammonium [BzTEA]+, phenyltrimethylammonium [PhTMA]+, and dimethyldihexylguanidinium [DMG]+ were combined with anions, p-toluenesulfonate [TSA](-), dicyanoamide [DCA]-, saccharine (2-sulfobenzoic acid imide sodium salt) [SAC]-, trifluoroacetate [TFA]-, bis(trifluoromethanesulfonyl)imide [Tf2N]-, trifluoromethanesulfonate [TfO]-, and thiocyanate [SCN]-. Important physical data for these ionic liquids are collated, namely solubility in common solvents, viscosity, density, melting point and water content. Apart from the viscosity, the Newtonian and non-Newtonian behavior of these ionic liquids is also disclosed. Stability of these ionic liquids under thermal, basic, acidic, nucleophilic, and oxidative conditions was also studied. The features of the solid-liquid phase transition were analyzed, namely the glass transition temperature and the heat capacity jump associated with the transition from the non-equilibrium glass to the metastable supercooled liquid. A degradation temperature of each ionic liquid was also determined. Comparisons of the properties of various ionic liquids were made.     

咪唑离子液体键合硅胶固定相纯水洗脱分离碱基、酚类和药物化合物

采用N-甲基咪唑和氯丙基咪唑反应的方法制备得到了离子液体键合硅胶固定相,并利用该固定相中的咪唑环阳离子和被分析物之间存在的多重作用机理如疏水作用、静电吸引和排斥及氢键作用等,以纯水作为流动相,成功地分离了碱基(胞嘧啶、胸腺嘧啶、2-氨基嘧啶和6-氯鸟嘌呤)、酚类化合物(间氨基酚、间苯二酚和间硝基酚)以及3种药物化合物(盐酸吗啉呱、阿昔洛韦和头孢氨苄)。采用没有添加任何有机溶剂和缓冲液的纯水作流动相,既绿色环保,又节约经济,简单方便。对该固定相分离这些化合物的保留机理做了探讨。     

氧化石墨烯修饰碳离子液体电极同时测定鸟嘌呤和腺嘌呤

以离子液体1-丁基-3-甲基咪唑六氟磷酸盐为粘合剂制备了碳糊电极,然后将氧化石墨烯滴涂到碳糊电极表面制成了一种新型的氧化石墨烯修饰碳离子液体电极。研究了鸟嘌呤和腺嘌呤在修饰电极上的电化学行为。实验结果表明,在0.1 mol/L醋酸盐缓冲溶液中(pH4.5),鸟嘌呤和腺嘌呤在该修饰电极上具有良好的电化学行为,在2.0×10-7～1.5×10-5mol/L浓度范围内鸟嘌呤和腺嘌呤的浓度在该电极上与电化学响应信号呈良好的线性关系,相关系数分别为为0.992和0.996。信噪比为3时,检出限为1.0×10-8mol/L。     

Preparation of stir cake sorptive extraction based on polymeric ionic liquid for the enrichment of benzimidazole anthelmintics in water,honey and milk samples

In this work, a new stir cake sorptive extraction (SCSE) using polymeric ionic liquid monolith as sorbent was prepared. The sorbent was obtained by in situ copolymerization of an ionic liquid, 1-allyl-3-methylimidazolium bis[(trifluoro methyl)sulfonyl]imide (AMII) and divinylbenzene (DB) in the presence of N,N-dimethylformamide. The influence of the content of ionic liquid and the porogen in the polymerization mixture on extraction performance was studied thoroughly. The physicochemical properties of the polymeric ionic liquid were characterized by infrared spectroscopy, elemental analysis, scanning electron microscopy and mercury intrusion porosimetry. The usefulness of SCSE–AMIIDB was demonstrated by the enrichment of trace benzimidazole anthelmintics. Several parameters affecting the extraction efficiency were investigated, and under the optimized conditions, a simple and effective method for the determination of trace benzimidazoles residues in water, milk and honey samples was established by coupling SCSE–AMIIDB with high performance liquid chromatography/diode array detection (SCSE–AMIIDB–HPLC/DAD). Results indicated that the limits of detection (S/N = 3) for target compounds were 0.020–0.072 μg L⁻¹, 0.035–0.10 μg L⁻¹ and 0.026–0.076 μg L⁻¹ in water, milk and honey samples, respectively. In addition, an acceptable reproducibility was achieved by evaluating the repeatability and intermediate precision with relative standard deviations (RSD) of less than 9% and 11%, respectively. Finally, the established AMII–SCSE–HPLC/DAD method was successfully applied for the determination of benzimidazoles residues in milk, honey and environmental water samples. Recoveries obtained for the determination of benzimidazole anthelmintics in spiking samples ranged from 70.2% to 117.6%, with RSD below 12% in all cases.     

基于离子液体的分散液液微萃取-柱前荧光衍生高效液相色谱法测定水样中8种磺胺类药物

建立了一种基于离子液体的分散液液微萃取技术结合柱前荧光衍生高效液相色谱(IL-DLLME-HPLC-FL)对8种磺胺类药物进行检测的方法,并成功应用于实际环境水样的分析。实验考察了萃取参数对磺胺萃取效率的影响及衍生产物的稳定性。最佳实验条件:以40 μL [C₆MIM]PF₆]为萃取剂,0.1 mL丙酮为分散剂,对pH=4且不含NaCl的水溶液进行不超声的分散液液微萃取,并衍生化反应6 h。结果表明:在最佳实验条件下,该法在0.2~10 μg/L和10~500 μg/L两个浓度范围内线性良好,线性相关系数r ≥0.9989;检出限为0.08~0.5 μg/L (S/N=3)。对实验室自来水、湖水、珠江水、池塘水分别加标5、50、200 μg/L的回收率为87.2%~101.4%,相对标准偏差为3.7%~6.2%。该法环保、简便,可用于测定实际水样中磺胺类药物。     

Anionic SO3H-functionalized ionic liquid: An efficient and recyclable catalyst for the Pechmann reaction of phenols with ethyl acetoacetate

This paper has reported an anionic SO₃H-functionalized ionic liquid N-methylimidazolium sulfomethylsulfonate ([Hmim][HO₃SCH₂SO₃]) for the synthesis of coumarins by Pechmann reaction. The [Hmim][HO₃SCH₂SO₃] is easier to prepare by one-step neutralization reaction of N-methylimidazole with methanedisulfonic acid and show high catalytic performance for Pechmann reaction. Besides, the catalyst can simply be separated from the reaction mixture and recycled ten times without noticeable loss of activity.     

Task specific ionic liquid as solvent,catalyst and reagent for regioselective ring opening of epoxides in water

Task specific ionic liquid as a novel and environmental eco-friendly green catalyst has been synthesized and used in the ring opening of epoxides under green conditions. This ionic liquids as solvent, catalyst and reagent afforded the corresponding thiocyanohydrins and azidohydrines with good regioselectivity and very short reaction times. The desired thiocyanohydrins and azidohydrines in 83–93% isolated yields.     

Equilibrium,kinetic, and thermodynamic studies of lead ion adsorption from mine wastewater onto MoS2-clinoptilolite composite

This work explored the potential of clinoptilolite, molybdenum sulphide (MoS₂), and MoS₂-clinoptilolite composite in lead (Pb) removal from aqueous medium and industrial mining wastewater. MoS₂-clinoptilolite composite was successfully prepared by a hydrothermal method. The surface properties, structure, and composition of the synthesized composite and the parent compounds were analyzed by scanning electron microscopy, X-ray diffraction, energy-dispersive X-ray spectroscopy, and Fourier transform infrared spectroscopy. The removal efficiency of lead from aqueous solution was studied in batch-mode experiments. The MoS₂-clinoptilolite was used for the removal of Pb ions (50 mg/L) from an aqueous solution: ~100% of the Pb was removed with a MoS₂-clinoptilolite dose of 0.075 g, pH 6 at 328K within 90 min. The adsorption capacities of Pb onto MoS₂-clinoptilolite were found to be higher than those onto clinoptilolite. Metal ion adsorption behavior was well explained by the Freundlich model, that is, multilayer adsorption of Pb molecules occurred on the heterogeneous surface of adsorbents in case of clinoptilolite, while in the case of MoS₂-clinoptilolite, the Langmuir model was suitable, that is, the adsorption occurred on a monolayer surface. The rate of Pb adsorption was explained by pseudo-second-order model suggesting that the adsorption process is presumably chemisorption. Thermodynamic parameters such as ΔH°, ΔS°, and ΔG° were calculated, which indicated that the adsorption was spontaneous and exothermic in nature. The selectivity of each adsorbent for Pb was also tested by adding the adsorbents to real gold mine water which contains competitive metal ions.     

Photopolymerization kinetics of ionic liquid monomers derived from the neutralization reaction between trialkylamines and acid‐containing (meth)acrylates

Polymerizable ionic liquids were synthesized from the neutralization reaction between trialkylamines (tributylamine, trihexylamine, trioctylamine, 2‐(dimethyl‐amino)ethyl acrylate, and 2‐(dimethylamino)ethyl methacrylate) and acid‐containing (meth)acrylates to study the kinetics of their photopolymerization. The ionic liquids formed from acrylic acid and methacrylic acid with trialkylamines showed low or moderate increases in rate compared to their monofunctional analogues. The ionic liquids formed from (meth)acrylic acid and a tertiary amine with a pendant acrylate exhibited rates typical of traditional di(meth)acrylates, although the (meth)acrylates were not covalently attached to the same molecule. All of the phosphate‐based ionic liquids exhibited very rapid polymerization rates and strong dependence on the initial viscosity. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3009–3021, 2007     

Formation of negative oxidation states of platinum and gold in redox ionic liquid: Electrochemical evidence

The electrochemical reduction of noble metal electrodes in the presence of redox ionic liquid, 1-ferrocenylethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide, [FcEMIM][TFSI], was investigated by cyclic voltammetry. Our experiments suggest the formation of metal with negative oxidation states, in the cases of platinum and gold electrodes [M_n⁻, FcEMIM⁺]. By analogy with the previous work, the formation of these phases is concomitant with the insertion of the supporting electrolyte; which correspond in our experimental condition to the redox cation of the ionic liquid. As an exciting result, the electrochemical investigations of the reduced electrode in electrolytic solution, containing solvent and supporting electrolyte, evidence the presence of the ferrocene groups at the electrode surface. Moreover, the reduced electrode exhibits the presence of the ferrocene even after, contact with air, after ultrasound, and after physical polishing, highlighting the large stability of this organo-metallic phases formed in this media. The AFM investigations demonstrate the morphological change of the platinum surface after the reduction process. Finally, our works bring a formal electrochemical proof of the presence of the ionic liquid cation inside the electrode material after the cathodic treatment in this media.     

Uranium (VI) adsorption on synthesized 4A and P1 zeolites: Equilibrium,kinetic, and thermodynamic studies

The present work deals with the investigation of the use of synthesized 4A and P1 zeolites in the adsorption of uranium (VI) ions from liquid effluents (with initial concentrations of 100, 85 and 80 mg·L⁻¹). Batch experiments were performed and the effects of temperature, solid–liquid ratio, pH and initial UO₂²⁺ ion concentration were studied, and the optimal parameters were determined. The kinetic and thermodynamic aspects of the process as well as the diffusion mechanism have been studied. The obtained results showed that 4A and P1 zeolites are very effective adsorbents.     

A kinetic study of the reaction between N,N-dimethyl-p-toluidine and its electrogenerated radical cation in a room temperature ionic liquid.

The reaction between N,N-dimethyl-p-toluidine (DMT) and the radical cation generated through its one-electron oxidation has been studied electrochemically in the room temperature ionic liquid N-methyl-N-butylpyrrolidinium bis(trifluoromethylsulfonyl)imide, [Py14][NTf2]. Kinetic information obtained as linear sweep and cyclic voltammetry collected at 5 microm, 10 microm and 0.3 mm diameter platinum disk electrodes over a range of initial substrate concentrations and scan rates spanning five orders of magnitude was complemented by chronoamperometric measurements designed to probe the rate of diffusion. At the fastest scan rates the homogeneous reactions following the initial electron transfer were effectively out-run, facilitating an assessment of the electrode kinetics using DIGISIM and a validated Nicholson's method. Through digital simulation the voltammetry was then shown to be consistent with a mechanism established for the same reaction in acetonitrile, involving dimerisation of the DMT radicals following an initial and rate-determining proton transfer step. After careful consideration of all parameters, a bimolecular rate constant of (3.4 +/- 1.1) x 10(2) dm3 mol(-1) s(-1) was deduced by fitting the data. This was compared to the equivalent value for acetonitrile and, in light of this, the implications on the viability of ionic liquids for use as alternative mainstream solvents briefly assessed.